summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorAaron Durbin <adurbin@chromium.org>2015-08-09 14:45:02 -0500
committerAaron Durbin <adurbin@chromium.org>2015-08-14 15:39:07 +0200
commit3d7020e0c48dcf5a61e68c284759c108907addaf (patch)
treef080129249d96a7ffec0b2dd3445df5a14942727 /src/mainboard
parent50ed38feba58ff59248015285bfdbe1c37cc4136 (diff)
downloadcoreboot-3d7020e0c48dcf5a61e68c284759c108907addaf.tar.xz
glados: make EC_SCI_L work
In order for the EC_SCI_L to work the GPE0 route needs to be set along w/ the GPE event for the EC. As the GPE0 route is dynamic the EC_SCI_GPI needs to be set along with the route so everything lines up. In this case, the GPE0 route is set to the defaults such that GPP_C, GPP_D, and GPP_E are routed to GPE0 block 0, 1, and 2, respectively. This works out for glados because the EC_SCI_L is connected to GPP_E16. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados. The 'acpi' interrupt in /proc/interrupts is incrementing as well as /sys/firmware/acpi/interrupts/gpe50. Original-Change-Id: I71fc4bec124f3ac87453a099412154e67aba6280 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/292011 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Idbb6d29364655537abc9ae6f012b3abb38edf138 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11210 Tested-by: build bot (Jenkins)
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/glados/devicetree.cb8
-rw-r--r--src/mainboard/google/glados/ec.h6
-rw-r--r--src/mainboard/google/glados/gpio.h2
3 files changed, 13 insertions, 3 deletions
diff --git a/src/mainboard/google/glados/devicetree.cb b/src/mainboard/google/glados/devicetree.cb
index 2e1cae75a8..9bb065de17 100644
--- a/src/mainboard/google/glados/devicetree.cb
+++ b/src/mainboard/google/glados/devicetree.cb
@@ -49,6 +49,14 @@ chip soc/intel/skylake
register "PttSwitch" = "0"
register "SkipExtGfxScan" = "1"
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route. i.e. If this route changes then the affected GPE
+ # offset bits also need to be changed.
+ register "gpe0_dw0" = "GPP_C"
+ register "gpe0_dw1" = "GPP_D"
+ register "gpe0_dw2" = "GPP_E"
+
# Embedded Controller host command window
register "gen1_dec" = "0x00fc0801"
diff --git a/src/mainboard/google/glados/ec.h b/src/mainboard/google/glados/ec.h
index f42e4c725a..d43b57ca45 100644
--- a/src/mainboard/google/glados/ec.h
+++ b/src/mainboard/google/glados/ec.h
@@ -24,8 +24,10 @@
#include <ec/google/chromeec/ec_commands.h>
#include <soc/gpio.h>
-/* GPP_E16 is EC_SCI_L */
-#define EC_SCI_GPI 16 /* TODO: Update this */
+/* GPP_E16 is EC_SCI_L, however the EC_SCI_GPI needs to be a bit
+ * number relative to the GPE0 block. GPP_E is routed as the dword 2
+ * in the GPE0 block. Therefore, 16 + 2 * 32 = 80. */
+#define EC_SCI_GPI 80
#define EC_SMI_GPI GPP_E15
#define MAINBOARD_EC_SCI_EVENTS \
diff --git a/src/mainboard/google/glados/gpio.h b/src/mainboard/google/glados/gpio.h
index ebbee20233..c7cd5ae0c5 100644
--- a/src/mainboard/google/glados/gpio.h
+++ b/src/mainboard/google/glados/gpio.h
@@ -135,7 +135,7 @@ static const struct pad_config gpio_table[] = {
/* DDPB_HPD0 */ PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1),
/* DDPC_HPD1 */ PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),
/* DDPD_HPD2 */ PAD_CFG_GPI_ACPI_SMI(GPP_E15, NONE, DEEP, YES), /* EC_SMI_L */
-/* DDPE_HPD3 */ PAD_CFG_NF(GPP_E16, NONE, DEEP, NF1),
+/* DDPE_HPD3 */ PAD_CFG_GPI_ACPI_SCI(GPP_E16, NONE, DEEP, YES), /* EC_SCI_L */
/* EDP_HPD */ PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1),
/* DDPB_CTRLCLK */ /* GPP_E18 */
/* DDPB_CTRLDATA */ /* GPP_E19 */