summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorTim Wawrzynczak <twawrzynczak@chromium.org>2019-07-23 13:35:21 -0600
committerPatrick Georgi <pgeorgi@google.com>2019-07-26 12:58:44 +0000
commit532f205a05868c46519af1be7ceb083872644e16 (patch)
treee6e22d8b36410bb4605b2ee69d7a64329046c450 /src/mainboard
parent19d04388a306d1ef2c4c0e3899171e6cb1eed209 (diff)
downloadcoreboot-532f205a05868c46519af1be7ceb083872644e16.tar.xz
mb/google/hatch/helios: Update GPIO and device tree
Based on updated schematics, change polarity of USI_INT, and add the reset and enable GPIOs to the touchscreen ACPI node. The stop GPIO can't be used with the current implementation of _ON, as the way it's wired will cause power sequencing to fail. BUG=b:137133194, b:138240502 BRANCH=none TEST=Compiles, don't have next board rev to test with Change-Id: I1dfb8e649418e4c5e9b897fb4bc11393adc21ea2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/hatch/variants/helios/gpio.c4
-rw-r--r--src/mainboard/google/hatch/variants/helios/overridetree.cb9
2 files changed, 10 insertions, 3 deletions
diff --git a/src/mainboard/google/hatch/variants/helios/gpio.c b/src/mainboard/google/hatch/variants/helios/gpio.c
index 12801de31a..ecb13f3a7a 100644
--- a/src/mainboard/google/hatch/variants/helios/gpio.c
+++ b/src/mainboard/google/hatch/variants/helios/gpio.c
@@ -51,6 +51,8 @@ static const struct pad_config gpio_table[] = {
PAD_NC(GPP_D8, NONE),
/* D10 : ISH_SPI_CLK ==> EN_PP3300_PP1800_FP */
PAD_CFG_GPO(GPP_D10, 0, DEEP),
+ /* D16 : USI_INT_L */
+ PAD_CFG_GPI_APIC(GPP_D16, NONE, PLTRST, LEVEL, INVERT),
/* D21 : SPI1_IO2 ==> NC */
PAD_NC(GPP_D21, NONE),
/* F0 : GPP_F0 ==> NC */
@@ -90,7 +92,7 @@ static const struct pad_config gpio_table[] = {
/* H13 : M2_SKT2_CFG1 ==> SPKR_RST_L */
PAD_CFG_GPO(GPP_H13, 1, DEEP),
/* H14 : M2_SKT2_CFG2 ==> TOUCHSCREEN_STOP_L */
- PAD_CFG_GPO(GPP_H14, 0, PLTRST),
+ PAD_CFG_GPO(GPP_H14, 1, PLTRST),
/* H19 : TIMESYNC[0] ==> MEM_STRAP_0 */
PAD_CFG_GPI(GPP_H19, NONE, PLTRST),
/* H22 : MEM_STRAP_1 */
diff --git a/src/mainboard/google/hatch/variants/helios/overridetree.cb b/src/mainboard/google/hatch/variants/helios/overridetree.cb
index 41c15c895c..cedf046e5f 100644
--- a/src/mainboard/google/hatch/variants/helios/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/helios/overridetree.cb
@@ -83,12 +83,17 @@ chip soc/intel/cannonlake
chip drivers/i2c/hid
register "generic.hid" = ""GDIX0000""
register "generic.desc" = ""Goodix Touchscreen""
- register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
+ register "generic.irq" =
+ "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
register "generic.probed" = "1"
register "generic.reset_gpio" =
- "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
+ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
register "generic.reset_delay_ms" = "10"
register "generic.reset_off_delay_ms" = "1"
+ register "generic.enable_gpio" =
+ "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)"
+ register "generic.enable_delay_ms" = "10"
+ register "generic.enable_off_delay_ms" = "1"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 5d on end