summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorGabe Black <gabeblack@google.com>2013-07-30 22:43:47 -0700
committerPatrick Georgi <patrick@georgi-clan.de>2013-12-21 19:58:31 +0100
commit61cd11187d17db572069f0af8434aeac38f19448 (patch)
treea4d2b38c46f8940b5a8c3f5d4716727524fc8029 /src/mainboard
parent318cb10eb9fad5b33d2326c4cd2a9b6788fbd68f (diff)
downloadcoreboot-61cd11187d17db572069f0af8434aeac38f19448.tar.xz
kirby: Clean some cruft from mainboard.c
1. Kirby doesn't have a backlight enable GPIO on the AP since that's handled entirely by the DP-to-LVDS bridge. 2. There is no tps65090 on the other side of the EC who's settings need to be adjusted. If we need to turn on the LCD or backlight power manually, it will have to be done in a different way. 3. The PMIC doesn't provide a 32KHz output for the audio codec. Change-Id: Iadc5f3aec4818805edf3f2517da9e6fee87085dc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63883 Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4413 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/kirby/mainboard.c33
1 files changed, 1 insertions, 32 deletions
diff --git a/src/mainboard/google/kirby/mainboard.c b/src/mainboard/google/kirby/mainboard.c
index 99752022b3..064d0f167e 100644
--- a/src/mainboard/google/kirby/mainboard.c
+++ b/src/mainboard/google/kirby/mainboard.c
@@ -172,7 +172,6 @@ static enum exynos5_gpio_pin dp_pd_l = GPIO_X35; /* active low */
static enum exynos5_gpio_pin dp_rst_l = GPIO_Y77; /* active low */
static enum exynos5_gpio_pin dp_hpd = GPIO_X26; /* active high */
static enum exynos5_gpio_pin bl_pwm = GPIO_B20; /* active high */
-static enum exynos5_gpio_pin bl_en = GPIO_X22; /* active high */
static void parade_dp_bridge_setup(void)
{
@@ -224,12 +223,6 @@ static void backlight_pwm(void)
udelay(LCD_T6_DELAY_MS * 1000);
}
-static void backlight_en(void)
-{
- /* Configure GPIO for LCD_BL_EN */
- gpio_direction_output(bl_en, 1);
-}
-
//static struct video_info smdk5420_dp_config = {
static struct video_info dp_video_info = {
/* FIXME: fix video_info struct to use const for name */
@@ -273,33 +266,12 @@ static void gpio_init(void)
exynos_pinmux_i2c10();
}
-enum {
- FET_CTRL_WAIT = 3 << 2,
- FET_CTRL_ADENFET = 1 << 1,
- FET_CTRL_ENFET = 1 << 0
-};
-
-static void tps65090_thru_ec_fet_set(int index)
-{
- uint8_t value = FET_CTRL_ADENFET | FET_CTRL_WAIT | FET_CTRL_ENFET;
-
- if (google_chromeec_i2c_xfer(0x48, 0xe + index, 1, &value, 1, 0)) {
- printk(BIOS_ERR,
- "Error sending i2c pass through command to EC.\n");
- return;
- }
-}
-
static void lcd_vdd(void)
{
- /* Enable FET6, lcd panel */
- tps65090_thru_ec_fet_set(6);
}
static void backlight_vdd(void)
{
- /* Enable FET1, backlight */
- tps65090_thru_ec_fet_set(1);
}
/* this happens after cpu_init where exynos resources are set */
@@ -332,7 +304,6 @@ static void mainboard_init(device_t dev)
backlight_vdd();
backlight_pwm();
- backlight_en();
// Uncomment to get excessive GPIO output:
// gpio_info();
@@ -372,11 +343,9 @@ static void mainboard_enable(device_t dev)
clock_epll_set_rate(epll_hz);
clock_select_i2s_clk_source();
clock_set_i2s_clk_prescaler(epll_hz, sample_rate * lr_frame_size);
-
- power_enable_xclkout();
}
struct chip_operations mainboard_ops = {
- .name = "Samsung/Google ARM Chromebook",
+ .name = "Google ARM Chromebook",
.enable_dev = mainboard_enable,
};