summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorLee Leahy <leroy.p.leahy@intel.com>2017-01-04 08:34:01 -0800
committerLee Leahy <leroy.p.leahy@intel.com>2017-03-14 23:55:40 +0100
commita50ced2eba20a007fa5b486c251c252ad09868cf (patch)
tree1c01a368ce870b0ce89c67e9bbb81aabf62190a3 /src/mainboard
parent1e24bf3f719f82c16fd577e87900e1aa0fd6605b (diff)
downloadcoreboot-a50ced2eba20a007fa5b486c251c252ad09868cf.tar.xz
mainboard/intel/galileo: Add vboot support
Add the necessary files and changes to support vboot. TEST=Build and run on Galileo Gen2 with a SparkFun CryptoShield 1. Obtain and install a SparkFun CryptoShield. https://www.sparkfun.com/products/13183 2. Edit src/mainboard/intel/galileo/Kconfig to select VBOOT_WITH_CRYPTO_SHIELD 3. Use make menuconfig to update the config values and select a payload that will fit. I used SeaBIOS which does not boot. 4. Build coreboot 5. Use the command file below to generate the signed coreboot image. 6. Flash build/coreboot.rom onto the Galileo board 7. The test is successful if verstage detects that it needs recovery after Phase 1. This is expected because the image does not contain the GBB section. 8. Flash build/coreboot.signed.bin onto the Galileo board 9. The test is successful if verstage reaches Phase 4 and selects SLOT A to load the rest of the files. #!/bin/sh # # The necessary tools were built and installed using the following commands: # # pushd 3rdparty/vboot # make # sudo make install # popd # # The keys were made using the following command # # 3rdparty/vboot/scripts/keygeneration/create_new_keys.sh \ # --4k --4k-root --output $PWD/keys # # # Create the GBB area blob # gbb_utility -c 0x100,0x1000,0x7ce80,0x1000 gbb.blob # # Add the empty GBB to the coreboot.rom image # dd conv=fdatasync ibs=4096 obs=4096 count=1553 \ if=build/coreboot.rom of=build/coreboot.signed.rom dd conv=fdatasync obs=4096 obs=4096 seek=1553 if=gbb.blob \ of=build/coreboot.signed.rom dd conv=fdatasync ibs=4096 obs=4096 skip=1680 seek=1680 \ count=368 if=build/coreboot.rom of=build/coreboot.signed.rom # # Add the keys and HWID to the GBB # gbb_utility \ --set --hwid='Galileo' \ -r $PWD/keys/recovery_key.vbpubk \ -k $PWD/keys/root_key.vbpubk \ build/coreboot.signed.rom # # Sign the firmware with the keys # 3rdparty/vboot/scripts/image_signing/sign_firmware.sh \ build/coreboot.signed.rom \ $PWD/keys \ build/coreboot.signed.rom Change-Id: I96170412e7bbc2b9c747ff5e2c845f29220353ed Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18041 Tested-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/intel/galileo/Kconfig33
-rw-r--r--src/mainboard/intel/galileo/Makefile.inc5
-rw-r--r--src/mainboard/intel/galileo/gen1.h28
-rw-r--r--src/mainboard/intel/galileo/gen2.h14
-rw-r--r--src/mainboard/intel/galileo/vboot.c111
-rw-r--r--src/mainboard/intel/galileo/vboot.fmd52
6 files changed, 240 insertions, 3 deletions
diff --git a/src/mainboard/intel/galileo/Kconfig b/src/mainboard/intel/galileo/Kconfig
index e941448b48..6acf10b330 100644
--- a/src/mainboard/intel/galileo/Kconfig
+++ b/src/mainboard/intel/galileo/Kconfig
@@ -1,7 +1,7 @@
##
## This file is part of the coreboot project.
##
-## Copyright (C) 2015-2016 Intel Corp.
+## Copyright (C) 2015-2017 Intel Corp.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
@@ -147,4 +147,35 @@ config FSP_DEBUG_ALL
FSP_CALLS_AND_STATUS, FSP_HEADER, POSTCAR_CONSOLE and VERIFY_HOBS
or FSP 1.1 DISPLAY_FSP_ENTRY_POINTS
+config VBOOT_WITH_CRYPTO_SHIELD
+ bool "Verified boot using the Crypto Shield board"
+ default n
+ select I2C_TPM
+ select MAINBOARD_HAS_I2C_TPM_ATMEL
+ select SEPARATE_VERSTAGE
+ select VBOOT
+ select VBOOT_STARTS_IN_BOOTBLOCK
+ select VBOOT_SOFT_REBOOT_WORKAROUND
+ select VBOOT_VBNV_CMOS
+ help
+ Perform a verified boot using the TPM on the Crypto Shield board.
+
+config DRIVER_TPM_I2C_ADDR
+ hex "Address of the I2C TPM chip"
+ depends on VBOOT_WITH_CRYPTO_SHIELD
+ default 0x29
+ help
+ I2C address of the TPM chip on the Crypto Shield board.
+
+config FMDFILE
+ string "FMAP description file in fmd format"
+ depends on VBOOT
+ default "src/mainboard/$(CONFIG_MAINBOARD_DIR)/vboot.fmd"
+ help
+ The build system creates a default FMAP from ROM_SIZE and CBFS_SIZE,
+ but in some cases more complex setups are required.
+
+ When an FMD descriptionn file is specified, the build system uses it
+ instead of creating a default FMAP file.
+
endif # BOARD_INTEL_QUARK
diff --git a/src/mainboard/intel/galileo/Makefile.inc b/src/mainboard/intel/galileo/Makefile.inc
index 16b2b4ac99..f2fda318c0 100644
--- a/src/mainboard/intel/galileo/Makefile.inc
+++ b/src/mainboard/intel/galileo/Makefile.inc
@@ -20,8 +20,13 @@ endif
bootblock-y += gpio.c
bootblock-y += reg_access.c
+verstage-y += gpio.c
+verstage-y += reg_access.c
+verstage-$(CONFIG_VBOOT) += vboot.c
+
romstage-y += gpio.c
romstage-y += reg_access.c
+romstage-$(CONFIG_VBOOT) += vboot.c
postcar-y += gpio.c
postcar-y += reg_access.c
diff --git a/src/mainboard/intel/galileo/gen1.h b/src/mainboard/intel/galileo/gen1.h
index 23b23091d2..524daf8f67 100644
--- a/src/mainboard/intel/galileo/gen1.h
+++ b/src/mainboard/intel/galileo/gen1.h
@@ -1,7 +1,7 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2016 Intel Corp.
+ * Copyright (C) 2016-2017 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -150,3 +150,29 @@ static const struct reg_script gen1_i2c_0x21_init[] = {
REG_SCRIPT_END
};
+
+static const struct reg_script gen1_tpm_reset_0x20[] = {
+ /* Reset the TPM using SW_RESET_N_SHLD (GPORT5_BIT1):
+ * low, output, delay, input
+ */
+ REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_OUTPUT5, ~BIT1),
+ REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_SELECT, 5),
+ REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, ~BIT1),
+ TIME_DELAY_USEC(5),
+ REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, BIT1),
+
+ REG_SCRIPT_END
+};
+
+static const struct reg_script gen1_tpm_reset_0x21[] = {
+ /* Reset the TPM using SW_RESET_N_SHLD (GPORT5_BIT1):
+ * low, output, delay, input
+ */
+ REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_OUTPUT5, ~BIT1),
+ REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_SELECT, 5),
+ REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, ~BIT1),
+ TIME_DELAY_USEC(5),
+ REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, BIT1),
+
+ REG_SCRIPT_END
+};
diff --git a/src/mainboard/intel/galileo/gen2.h b/src/mainboard/intel/galileo/gen2.h
index 10c832198e..253976e6df 100644
--- a/src/mainboard/intel/galileo/gen2.h
+++ b/src/mainboard/intel/galileo/gen2.h
@@ -1,7 +1,7 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2016 Intel Corp.
+ * Copyright (C) 2016-2017 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -98,3 +98,15 @@ static const struct reg_script gen2_i2c_init[] = {
REG_SCRIPT_END
};
+
+static const struct reg_script gen2_tpm_reset[] = {
+ /* Reset the TPM using SW_RESET_N_SHLD (EXP1 P1.7):
+ * low, output, delay, input
+ */
+ REG_I2C_AND(GEN2_I2C_GPIO_EXP1, GEN2_GPIO_EXP_OUTPUT1, ~BIT7),
+ REG_I2C_AND(GEN2_I2C_GPIO_EXP1, GEN2_GPIO_EXP_CONFIG1, ~BIT7),
+ TIME_DELAY_USEC(5),
+ REG_I2C_OR(GEN2_I2C_GPIO_EXP1, GEN2_GPIO_EXP_CONFIG1, BIT7),
+
+ REG_SCRIPT_END
+};
diff --git a/src/mainboard/intel/galileo/vboot.c b/src/mainboard/intel/galileo/vboot.c
new file mode 100644
index 0000000000..cc8831eaeb
--- /dev/null
+++ b/src/mainboard/intel/galileo/vboot.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <assert.h>
+#include <bootmode.h>
+#include <console/console.h>
+#include <delay.h>
+#include <device/i2c.h>
+#include <lib.h>
+#include <soc/i2c.h>
+#include <soc/reg_access.h>
+#include "reg_access.h"
+#include "gen1.h"
+#include "gen2.h"
+#include <spi_flash.h>
+#include <vboot/vboot_common.h>
+
+int clear_recovery_mode_switch(void)
+{
+ /* Nothing to do */
+ return 0;
+}
+
+int get_developer_mode_switch(void)
+{
+ return 0;
+}
+
+int get_recovery_mode_switch(void)
+{
+ return 0;
+}
+
+int get_sw_write_protect_state(void)
+{
+ /* Not write protected */
+ return 0;
+}
+
+int get_write_protect_state(void)
+{
+ /* Not write protected */
+ return 0;
+}
+
+void log_recovery_mode_switch(void)
+{
+}
+
+void verstage_mainboard_init(void)
+{
+ const struct reg_script *script;
+
+ /* Crypto Shield I2C Addresses:
+ *
+ * 0x29: AT97S3204T - TPM 1.2
+ * 0x50: ATAES132 - AES-128
+ * 0x60: ATECC108 - Elliptical Curve
+ * 0x64: ATSHA204 - SHA-256
+ * 0x68: DS3231M - RTC
+ */
+
+ /* Determine the correct script for the board */
+ if (IS_ENABLED(CONFIG_GALILEO_GEN2))
+ script = gen2_i2c_init;
+ else
+ /* Determine which I2C address is in use */
+ script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
+ & GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
+ ? gen1_i2c_0x20_init : gen1_i2c_0x21_init;
+
+ /* Direct the I2C SDA and SCL signals to the Arduino connector */
+ reg_script_run(script);
+}
+
+void __attribute__((weak)) vboot_platform_prepare_reboot(void)
+{
+ const struct reg_script *script;
+
+ /* Crypto Shield I2C Addresses:
+ *
+ * 0x29: AT97S3204T - TPM 1.2
+ * 0x50: ATAES132 - AES-128
+ * 0x60: ATECC108 - Elliptical Curve
+ * 0x64: ATSHA204 - SHA-256
+ * 0x68: DS3231M - RTC
+ */
+
+ /* Determine the correct script for the board */
+ if (IS_ENABLED(CONFIG_GALILEO_GEN2))
+ script = gen2_tpm_reset;
+ else
+ /* Determine which I2C address is in use */
+ script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
+ & GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
+ ? gen1_tpm_reset_0x20 : gen1_tpm_reset_0x21;
+
+ /* Reset the TPM */
+ reg_script_run(script);
+}
diff --git a/src/mainboard/intel/galileo/vboot.fmd b/src/mainboard/intel/galileo/vboot.fmd
new file mode 100644
index 0000000000..55e41e56aa
--- /dev/null
+++ b/src/mainboard/intel/galileo/vboot.fmd
@@ -0,0 +1,52 @@
+#
+# Copyright (C) 2016-2017 Intel Corporation
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but without any warranty; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+FLASH@0xff800000 0x800000 {
+ SI_ALL@0x0 0x200000 {
+ SI_DESC@0x0 0x1000
+ SI_ME@0x1000 0x1ff000
+ }
+ SI_BIOS@0x200000 0x600000 {
+ RW_SECTION_A@0x0 0xf0000 {
+ VBLOCK_A@0x0 0x10000
+ FW_MAIN_A(CBFS)@0x10000 0xdffc0
+ RW_FWID_A@0xeffc0 0x40
+ }
+ RW_SECTION_B@0xf0000 0xf0000 {
+ VBLOCK_B@0x0 0x10000
+ FW_MAIN_B(CBFS)@0x10000 0xdffc0
+ RW_FWID_B@0xeffc0 0x40
+ }
+ RW_MRC_CACHE@0x1e0000 0x10000
+ RW_ELOG@0x1f0000 0x4000
+ RW_SHARED@0x1f4000 0x4000 {
+ SHARED_DATA@0x0 0x2000
+ VBLOCK_DEV@0x2000 0x2000
+ }
+ RW_VPD@0x1f8000 0x2000
+ RW_NVRAM@0x1fa000 0x6000
+ RW_LEGACY(CBFS)@0x200000 0x200000
+ WP_RO@0x400000 0x200000 {
+ RO_VPD@0x0 0x4000
+ RO_UNUSED@0x4000 0xc000
+ RO_SECTION@0x10000 0x1f0000 {
+ FMAP@0x0 0x800
+ RO_FRID@0x800 0x40
+ RO_FRID_PAD@0x840 0x7c0
+ GBB@0x1000 0x7f000
+ COREBOOT(CBFS)@0x80000 0x170000
+ }
+ }
+ }
+}