summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorFurquan Shaikh <furquan@google.com>2018-03-26 16:23:06 -0700
committerAaron Durbin <adurbin@chromium.org>2018-03-27 03:26:39 +0000
commitb7b49b00de46f8ff2816554ed939260be8a646d5 (patch)
tree1eb923abd5e5f1d15f4fc8f19382ac59cb42d04d /src/mainboard
parentae423852c2a533d41e7912dad6b46594c4bf8f04 (diff)
downloadcoreboot-b7b49b00de46f8ff2816554ed939260be8a646d5.tar.xz
mb/google/octopus: Remove emmc tuning parameters from devicetree
Current emmc tuning parameters for octopus were copied over from other boards and result in failure to boot from emmc. This change gets rid of the emmc tuning parameters in devicetree. Once emmc tuning tests are run for octopus, these parameters can be added back. BUG=b:75986903 BRANCH=None TEST=Verified that octopus boots from eMMC without any errors in depthcharge. Change-Id: I7ac44a54afd1ecfe355a9654ac8e92133b67637f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/octopus/variants/baseboard/devicetree.cb42
1 files changed, 0 insertions, 42 deletions
diff --git a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb
index a19d2475e7..7aa7038fa8 100644
--- a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb
@@ -24,48 +24,6 @@ chip soc/intel/apollolake
# GPIO for PERST_0 (WLAN_PE_RST)
register "prt0_gpio" = "GPIO_164"
- # EMMC TX DATA Delay 1
- # Refer to EDS-Vol2-16.33.
- # [14:8] steps of delay for HS400, each 125ps.
- # [6:0] steps of delay for SDR104/HS200, each 125ps.
- register "emmc_tx_data_cntl1" = "0x0C3A"
-
- # EMMC TX DATA Delay 2
- # Refer to EDS-Vol2-16.34.
- # [30:24] steps of delay for SDR50, each 125ps.
- # [22:16] steps of delay for DDR50, each 125ps.
- # [14:8] steps of delay for SDR25/HS50, each 125ps.
- # [6:0] steps of delay for SDR12, each 125ps.
- register "emmc_tx_data_cntl2" = "0x28272929"
-
- # EMMC RX CMD/DATA Delay 1
- # Refer to EDS-Vol2-16.35.
- # [30:24] steps of delay for SDR50, each 125ps.
- # [22:16] steps of delay for DDR50, each 125ps.
- # [14:8] steps of delay for SDR25/HS50, each 125ps.
- # [6:0] steps of delay for SDR12, each 125ps.
- register "emmc_rx_cmd_data_cntl1" = "0x003B263B"
-
- # EMMC RX CMD/DATA Delay 2
- # Refer to EDS-Vol2-16.37.
- # [17:16] stands for Rx Clock before Output Buffer
- # [14:8] steps of delay for Auto Tuning Mode, each 125ps.
- # [6:0] steps of delay for HS200, each 125ps.
- register "emmc_rx_cmd_data_cntl2" = "0x10008"
-
- # EMMC RX STROBE Delay
- # Refer to EDS-Vol2-16.36.
- # [16] Enable Auto Tuning for HS400 Strobe Path
- # [14:8] steps of delay for HS400 Mode 1, each 125ps.
- # [6:0] steps of delay for HS400 Mode 2, each 125ps.
- register "emmc_rx_strobe_cntl" = "0x0a0a"
-
- # EMMC TX COMMAND Delay
- # Refer to EDS-Vol2-16.32.
- # [14:8] steps of delay for DDR Mode, each 125ps.
- # [6:0] steps of delay for SDR Mode, each 125ps.
- register "emmc_tx_cmd_cntl" = "0x1305"
-
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route, i.e., if this route changes then the affected GPE