FUI: reorganize include files

We've got enough of a handle on this to realize some things:
drm_dp_helper.h is by design device and architecture independent
i915.h is common to most intel graphics chipsets going back several years
i915_reg.h is as well

Move these files to src/include/device, and adjust the .c files accordingly.

Change-Id: I07512b3695fea0b22949074b467986420783d62a
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3637
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

4 files changed, 31 insertions, 177 deletions

diff --git a/src/mainboard/intel/wtm2/graphics.c b/src/mainboard/intel/wtm2/graphics.c
index 79820b9fe9..6d375e6a27 100644
--- a/src/mainboard/intel/wtm2/graphics.c
+++ b/src/mainboard/intel/wtm2/graphics.c
@@ -20,7 +20,7 @@
  * will be all machine generated. Avoid editing.
  */
 #include <console/console.h>
-#include "i915io.h"
+#include <device/i915.h>
 
 void graphics_register_reset(u32 aux_ctl, u32 aux_data, int verbose)
 {
diff --git a/src/mainboard/intel/wtm2/i915.c b/src/mainboard/intel/wtm2/i915.c
index 9d0c27d850..df8813888f 100644
--- a/src/mainboard/intel/wtm2/i915.c
+++ b/src/mainboard/intel/wtm2/i915.c
@@ -42,7 +42,26 @@
 #include <cpu/x86/mtrr.h>
 #include <cpu/x86/msr.h>
 #include <edid.h>
-#include "i915io.h"
+#include <device/i915.h>
+
+/* how many bytes do we need for the framebuffer?
+ * Well, this gets messy. To get an exact answer, we have
+ * to ask the panel, but we'd rather zero the memory
+ * and set up the gtt while the panel powers up. So,
+ * we take a reasonable guess, secure in the knowledge that the
+ * MRC has to overestimate the number of bytes used.
+ * 8 MiB is a very safe guess. There may be a better way later, but
+ * fact is, the initial framebuffer is only very temporary. And taking
+ * a little long is ok; this is done much faster than the AUX
+ * channel is ready for IO.
+ */
+#define FRAME_BUFFER_BYTES (8*MiB)
+/* how many 4096-byte pages do we need for the framebuffer?
+ * There are hard ways to get this, and easy ways:
+ * there are FRAME_BUFFER_BYTES/4096 pages, since pages are 4096
+ * on this chip (and in fact every Intel graphics chip we've seen).
+ */
+#define FRAME_BUFFER_PAGES (FRAME_BUFFER_BYTES/(4096))
 
 static int verbose = 0;
 
@@ -139,95 +158,6 @@ static unsigned long globalmicroseconds(void)
 
 static int i915_init_done = 0;
 
-/* fill the palette. This runs when the P opcode is hit. */
-static void palette(void)
-{
-	int i;
-	unsigned long color = 0;
-
-	for(i = 0; i < 256; i++, color += 0x010101){
-		io_i915_WRITE32(color, _LGC_PALETTE_A + (i<<2));
-	}
-}
-
-static unsigned long times[4096];
-
-static int run(int index)
-{
-	int i, prev = 0;
-	struct iodef *id, *lastidread = 0;
-	unsigned long u, t;
-	if (index >= niodefs)
-		return index;
-	/* state machine! */
-	for(i = index, id = &iodefs[i]; id->op; i++, id++){
-		switch(id->op){
-		case M:
-			if (verbose & vmsg) printk(BIOS_SPEW, "%ld: %s\n",
-						   globalmicroseconds(), id->msg);
-			break;
-		case P:
-			palette();
-			break;
-		case R:
-			u = READ32(id->addr);
-			if (verbose & vio)
-				printk(BIOS_SPEW, "\texpect %08lx\n", id->data);
-			/* we're looking for something. */
-			if (lastidread->addr == id->addr){
-				/* they're going to be polling.
-				 * just do it 1000 times
-				 */
-				for(t = 0; t < 1000 && id->data != u; t++){
-					u = READ32(id->addr);
-				}
-				if (verbose & vspin) printk(BIOS_SPEW,
-							    "%s: # loops %ld got %08lx want %08lx\n",
-							    regname(id->addr),
-							    t, u, id->data);
-			}
-			lastidread = id;
-			break;
-		case W:
-			WRITE32(id->data, id->addr);
-			if (id->addr == PCH_PP_CONTROL){
-				if (verbose & vio)
-					printk(BIOS_SPEW, "PCH_PP_CONTROL\n");
-				switch(id->data & 0xf){
-				case 8: break;
-				case 7: break;
-				default: udelay(100000);
-					if (verbose & vio)
-						printk(BIOS_SPEW, "U %d\n", 100000);
-				}
-			}
-			break;
-		case V:
-			if (id->count < 8){
-				prev = verbose;
-				verbose = id->count;
-			} else {
-				verbose = prev;
-			}
-			printk(BIOS_SPEW, "Change verbosity to %d\n", verbose);
-			break;
-		case I:
-			printk(BIOS_SPEW, "run: return %d\n", i+1);
-			return i+1;
-			break;
-		default:
-			printk(BIOS_SPEW, "BAD TABLE, opcode %d @ %d\n", id->op, i);
-			return -1;
-		}
-		if (id->udelay)
-			udelay(id->udelay);
-		if (i < ARRAY_SIZE(times))
-			times[i] = globalmicroseconds();
-	}
-	printk(BIOS_SPEW, "run: return %d\n", i);
-	return i+1;
-}
-
 int i915lightup(unsigned int physbase, unsigned int iobase, unsigned int mmio,
 		unsigned int gfx);
 
diff --git a/src/mainboard/intel/wtm2/i915io.h b/src/mainboard/intel/wtm2/i915io.h
deleted file mode 100644
index 52842adb45..0000000000
--- a/src/mainboard/intel/wtm2/i915io.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright 2012 Google Inc.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <northbridge/intel/haswell/i915_reg.h>
-#include <northbridge/intel/haswell/drm_dp_helper.h>
-
-/* things that are, strangely, not defined anywhere? */
-#define PCH_PP_UNLOCK	0xabcd0000
-#define WMx_LP_SR_EN	(1<<31)
-#define PRB0_TAIL	0x02030
-#define PRB0_HEAD	0x02034
-#define PRB0_START	0x02038
-#define PRB0_CTL	0x0203c
-
-
-/* mainboard-specific defines */
-/* how many bytes do we need for the framebuffer?
- * Well, this gets messy. To get an exact answer, we have
- * to ask the panel, but we'd rather zero the memory
- * and set up the gtt while the panel powers up. So,
- * we take a reasonable guess, secure in the knowledge that the
- * MRC has to overestimate the number of bytes used.
- * 8 MiB is a very safe guess. There may be a better way later, but
- * fact is, the initial framebuffer is only very temporary. And taking
- * a little long is ok; this is done much faster than the AUX
- * channel is ready for IO.
- */
-#define FRAME_BUFFER_BYTES (8*MiB)
-/* how many 4096-byte pages do we need for the framebuffer?
- * There are hard ways to get this, and easy ways:
- * there are FRAME_BUFFER_BYTES/4096 pages, since pages are 4096
- * on this chip.
- */
-#define FRAME_BUFFER_PAGES (FRAME_BUFFER_BYTES/(4096))
-
-
-/* debug enums. These are for printks that, due to their place in the
- * middle of graphics device IO, might change timing.  Use with care
- * or not at all.
- */
-enum {
-	vio = 2, /* dump every IO */
-	vspin = 4, /* print # of times we spun on a register value */
-};
-
-/* i915.c */
-unsigned long io_i915_READ32(unsigned long addr);
-void io_i915_WRITE32(unsigned long val, unsigned long addr);
-int vbe_mode_info_valid(void);
-void fill_lb_framebuffer(struct lb_framebuffer *framebuffer);
-
-/* intel_dp.c */
-u32 pack_aux(u32 *src, int src_bytes);
-void unpack_aux(u32 src, u8 *dst, int dst_bytes);
-int intel_dp_aux_ch(u32 ch_ctl, u32 ch_data, u32 *send, int send_bytes,
-	u8 *recv, int recv_size);
-
-/* i915io.c */
-void graphics_register_reset(u32 aux_ctl, u32 aux_data, int verbose);
diff --git a/src/mainboard/intel/wtm2/intel_dp.c b/src/mainboard/intel/wtm2/intel_dp.c
index 8fac6f8910..e7222a3f2b 100644
--- a/src/mainboard/intel/wtm2/intel_dp.c
+++ b/src/mainboard/intel/wtm2/intel_dp.c
@@ -30,7 +30,7 @@
 #include <console/console.h>
 #include <stdint.h>
 #include <delay.h>
-#include "i915io.h"
+#include <device/i915.h>
 
 u32
 pack_aux(u32 *src32, int src_bytes)
@@ -79,7 +79,7 @@ intel_dp_aux_ch(u32 ch_ctl, u32 ch_data, u32 *send, int send_bytes,
 
 	/* Try to wait for any previous AUX channel activity */
 	for (try = 0; try < 3; try++) {
-		status = io_i915_READ32(ch_ctl);
+		status = io_i915_read32(ch_ctl);
 		if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
 			break;
 		udelay(1000);
@@ -87,8 +87,9 @@ intel_dp_aux_ch(u32 ch_ctl, u32 ch_data, u32 *send, int send_bytes,
 
 	if (try == 3) {
 	  printk(BIOS_SPEW, "[000000.0] [drm:%s], ", __func__);
-	  printk(BIOS_SPEW, "dp_aux_ch not started status 0x%08lx\n",
-		  io_i915_READ32(ch_ctl));
+	  status = io_i915_read32(ch_ctl);
+	  printk(BIOS_SPEW, "dp_aux_ch not started status 0x%08x\n",
+		 status);
 	  return -1;
 	}
 
@@ -96,10 +97,10 @@ intel_dp_aux_ch(u32 ch_ctl, u32 ch_data, u32 *send, int send_bytes,
 	for (try = 0; try < 5; try++) {
 		/* Load the send data into the aux channel data registers */
 		for (i = 0; i < send_bytes; i += 4)
-			io_i915_WRITE32(send[i], ch_data + i);
+			io_i915_write32(send[i], ch_data + i);
 
 		/* Send the command and wait for it to complete */
-		io_i915_WRITE32(
+		io_i915_write32(
 			   DP_AUX_CH_CTL_SEND_BUSY |
 			   DP_AUX_CH_CTL_TIME_OUT_400us |
 			   (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
@@ -109,14 +110,14 @@ intel_dp_aux_ch(u32 ch_ctl, u32 ch_data, u32 *send, int send_bytes,
 			   DP_AUX_CH_CTL_TIME_OUT_ERROR |
 			   DP_AUX_CH_CTL_RECEIVE_ERROR, ch_ctl);
 		for (;;) {
-			status = io_i915_READ32(ch_ctl);
+			status = io_i915_read32(ch_ctl);
 			if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
 				break;
 			udelay(100);
 		}
 
 		/* Clear done status and any errors */
-		io_i915_WRITE32(
+		io_i915_write32(
 			   status |
 			   DP_AUX_CH_CTL_DONE |
 			   DP_AUX_CH_CTL_TIME_OUT_ERROR |
@@ -159,9 +160,8 @@ intel_dp_aux_ch(u32 ch_ctl, u32 ch_data, u32 *send, int send_bytes,
 		recv_bytes = recv_size;
 
 	for (i = 0; i < recv_bytes; i += 4)
-		unpack_aux(io_i915_READ32(ch_data + i),
+		unpack_aux(io_i915_read32(ch_data + i),
 			   recv + i, recv_bytes - i);
 
 	return recv_bytes;
 }
-