summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorKimarie Hoot <kimarie.hoot@se-eng.com>2013-03-07 17:12:36 -0700
committerStefan Reinauer <stefan.reinauer@coreboot.org>2013-03-20 05:54:28 +0100
commit2a9145e743ee9d10174c469a9fc1dad0ad75d73d (patch)
tree0118a7b15e155720ac9ac9f7a23b2b3eef869a6b /src/mainboard
parentb37ec540affaaeb3a8a230895c08778c54f1d076 (diff)
downloadcoreboot-2a9145e743ee9d10174c469a9fc1dad0ad75d73d.tar.xz
AMD Dinar: Use SPD read code from F15 wrapper
Changes: - Get rid of the dinar mainboard specific code and use the platform generic function wrapper that was added in change http://review.coreboot.org/#/c/2777/ AMD Fam15: Add SPD read functions to wrapper code - Move DIMM addresses into devicetree.cb Notes: - The DIMM reads only happen in romstage, so the function is not available in ramstage. Point the read-SPD callback to a generic function in ramstage. - select_socket() and restore_socket() were created from code that was removed from AmdMemoryReadSPD() in dimmSpd.c. The functionality is specific to the dinar mainboard configuration and was therefore split from the generic read SPD functionality. Change-Id: I1e4b9a20dc497c15dbde6d89865bd5ee7501cdc0 Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-on: http://review.coreboot.org/2830 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/amd/dinar/BiosCallOuts.c62
-rw-r--r--src/mainboard/amd/dinar/Makefile.inc2
-rw-r--r--src/mainboard/amd/dinar/devicetree.cb6
-rw-r--r--src/mainboard/amd/dinar/dimmSpd.c333
4 files changed, 67 insertions, 336 deletions
diff --git a/src/mainboard/amd/dinar/BiosCallOuts.c b/src/mainboard/amd/dinar/BiosCallOuts.c
index a1c89dfc82..4fb3c66d59 100644
--- a/src/mainboard/amd/dinar/BiosCallOuts.c
+++ b/src/mainboard/amd/dinar/BiosCallOuts.c
@@ -24,6 +24,8 @@
#include "OptionsIds.h"
#include "heapManager.h"
#include "SB700.h"
+#include <northbridge/amd/agesa/family15/dimmSpd.h>
+#include "OEM.h" /* SMBUS0_BASE_ADDRESS */
#ifndef SB_GPIO_REG01
#define SB_GPIO_REG01 1
@@ -37,6 +39,53 @@
#define SB_GPIO_REG27 27
#endif
+#ifdef __PRE_RAM__
+/* This define is used when selecting the appropriate socket for the SPD read
+ * because this is a multi-socket design.
+ */
+#define LTC4305_SMBUS_ADDR (0x94)
+
+static void select_socket(UINT8 socket_id)
+{
+ AMD_CONFIG_PARAMS StdHeader;
+ UINT32 PciData32;
+ UINT8 PciData8;
+ PCI_ADDR PciAddress;
+
+ /* Set SMBus MMIO. */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0x90);
+ PciData32 = (SMBUS0_BASE_ADDRESS & 0xFFFFFFF0) | BIT0;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData32, &StdHeader);
+
+ /* Enable SMBus MMIO. */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0xD2);
+ LibAmdPciRead(AccessWidth8, PciAddress, &PciData8, &StdHeader); ;
+ PciData8 |= BIT0;
+ LibAmdPciWrite(AccessWidth8, PciAddress, &PciData8, &StdHeader);
+
+ switch (socket_id) {
+ case 0:
+ /* Switch onto the First CPU Socket SMBus */
+ writeSmbusByte(SMBUS0_BASE_ADDRESS, LTC4305_SMBUS_ADDR, 0x80, 0x03);
+ break;
+ case 1:
+ /* Switch onto the Second CPU Socket SMBus */
+ writeSmbusByte(SMBUS0_BASE_ADDRESS, LTC4305_SMBUS_ADDR, 0x40, 0x03);
+ break;
+ default:
+ /* Switch off two CPU Sockets SMBus */
+ writeSmbusByte(SMBUS0_BASE_ADDRESS, LTC4305_SMBUS_ADDR, 0x00, 0x03);
+ break;
+ }
+}
+
+static void restore_socket(void)
+{
+ /* Switch off two CPU Sockets SMBus */
+ writeSmbusByte(SMBUS0_BASE_ADDRESS, LTC4305_SMBUS_ADDR, 0x00, 0x03);
+}
+#endif
+
STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
{AGESA_ALLOCATE_BUFFER,
@@ -500,7 +549,18 @@ AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
AGESA_STATUS BiosReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
AGESA_STATUS Status;
- Status = AmdMemoryReadSPD (Func, Data, (AGESA_READ_SPD_PARAMS *)ConfigPtr);
+#ifdef __PRE_RAM__
+ if (ConfigPtr == NULL)
+ return AGESA_ERROR;
+
+ select_socket(((AGESA_READ_SPD_PARAMS *)ConfigPtr)->SocketId);
+
+ Status = agesa_ReadSPD (Func, Data, ConfigPtr);
+
+ restore_socket();
+#else
+ Status = AGESA_UNSUPPORTED;
+#endif
return Status;
}
diff --git a/src/mainboard/amd/dinar/Makefile.inc b/src/mainboard/amd/dinar/Makefile.inc
index 0fbfe1ffaf..42f458b215 100644
--- a/src/mainboard/amd/dinar/Makefile.inc
+++ b/src/mainboard/amd/dinar/Makefile.inc
@@ -19,14 +19,12 @@
romstage-y += buildOpts.c
romstage-y += agesawrapper.c
-romstage-y += dimmSpd.c
romstage-y += BiosCallOuts.c
romstage-y += sb700_cfg.c
romstage-y += rd890_cfg.c
ramstage-y += buildOpts.c
ramstage-y += agesawrapper.c
-ramstage-y += dimmSpd.c
ramstage-y += BiosCallOuts.c
ramstage-y += sb700_cfg.c
ramstage-y += rd890_cfg.c
diff --git a/src/mainboard/amd/dinar/devicetree.cb b/src/mainboard/amd/dinar/devicetree.cb
index e84762e0f0..09becd431f 100644
--- a/src/mainboard/amd/dinar/devicetree.cb
+++ b/src/mainboard/amd/dinar/devicetree.cb
@@ -97,6 +97,12 @@ chip northbridge/amd/agesa/family15/root_complex
device pci 18.3 on end
device pci 18.4 on end
device pci 18.5 on end
+
+ register "spdAddrLookup" = "
+ {
+ { {0xAC, 0xAE}, {0xA8, 0xAA}, {0xA4, 0xA6}, {0xA0, 0xA2}, }, // socket 0 - Channel 0-3
+ { {0xAC, 0xAE}, {0xA8, 0xAA}, {0xA4, 0xA6}, {0xA0, 0xA2}, }, // socket 1 - Channel 0-3
+ }"
end #chip northbridge/amd/agesa/family15 # CPU side of HT root complex
end #domain
end #northbridge/amd/agesa/family15/root_complex
diff --git a/src/mainboard/amd/dinar/dimmSpd.c b/src/mainboard/amd/dinar/dimmSpd.c
deleted file mode 100644
index 10b26c283c..0000000000
--- a/src/mainboard/amd/dinar/dimmSpd.c
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-
-/*----------------------------------------------------------------------------------------
- * M O D U L E S U S E D
- *----------------------------------------------------------------------------------------
- */
-
-#include "Porting.h"
-#include "AGESA.h"
-#include "amdlib.h"
-
-/*----------------------------------------------------------------------------------------
- * D E F I N I T I O N S A N D M A C R O S
- *----------------------------------------------------------------------------------------
- */
-#define SMBUS_BASE_ADDR 0xB00
-#define DIMENSION(array)(sizeof (array)/ sizeof (array [0]))
-
-/*----------------------------------------------------------------------------------------
- * T Y P E D E F S A N D S T R U C T U R E S
- *----------------------------------------------------------------------------------------
- */
-#define LTC4305_SMBUS_ADDR 0x94
-
-typedef struct _DIMM_INFO_SMBUS{
- UINT8 SocketId;
- UINT8 MemChannelId;
- UINT8 DimmId;
- UINT8 SmbusAddress;
-} DIMM_INFO_SMBUS;
-/*
- * SPD address table - porting required
- */
-STATIC CONST DIMM_INFO_SMBUS SpdAddrLookup [] =
-{
- /* Socket, Channel, Dimm, Smbus */
- {0, 0, 0, 0xAC},
- {0, 0, 1, 0xAE},
- {0, 1, 0, 0xA8},
- {0, 1, 1, 0xAA},
- {0, 2, 0, 0xA4},
- {0, 2, 1, 0xA6},
- {0, 3, 0, 0xA0},
- {0, 3, 1, 0xA2},
- {1, 0, 0, 0xAC},
- {1, 0, 1, 0xAE},
- {1, 1, 0, 0xA8},
- {1, 1, 1, 0xAA},
- {1, 2, 0, 0xA4},
- {1, 2, 1, 0xA6},
- {1, 3, 0, 0xA0},
- {1, 3, 1, 0xA2}
-};
-
-/*----------------------------------------------------------------------------------------
- * P R O T O T Y P E S O F L O C A L F U N C T I O N S
- *----------------------------------------------------------------------------------------
- */
-
-AGESA_STATUS
-AmdMemoryReadSPD (
- IN UINT32 Func,
- IN UINT32 Data,
- IN OUT AGESA_READ_SPD_PARAMS *SpdData
- );
-
-/*----------------------------------------------------------------------------------------
- * E X P O R T E D F U N C T I O N S
- *----------------------------------------------------------------------------------------
- */
-
-
-/*---------------------------------------------------------------------------------------
- * L O C A L F U N C T I O N S
- *---------------------------------------------------------------------------------------
- */
-
-STATIC
-VOID
-WritePmReg (
- IN UINT8 Reg,
- IN UINT8 Data
- )
-{
- __outbyte (0xCD6, Reg);
- __outbyte (0xCD7, Data);
-}
-STATIC
-VOID
-SetupFch (
- IN UINT16
- IN IoBase
- )
-{
-
- AMD_CONFIG_PARAMS StdHeader;
- UINT32 PciData32;
- UINT8 PciData8;
- PCI_ADDR PciAddress;
-
- /* Set SMBUS MMIO. */
- PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0x90);
- PciData32 = (SMBUS_BASE_ADDR & 0xFFFFFFF0) | BIT0;
- LibAmdPciWrite(AccessWidth32, PciAddress, &PciData32, &StdHeader);
-
- /* Enable SMBUS MMIO. */
- PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0xD2);
- LibAmdPciRead(AccessWidth8, PciAddress, &PciData8, &StdHeader); ;
- PciData8 |= BIT0;
- LibAmdPciWrite(AccessWidth8, PciAddress, &PciData8, &StdHeader);
- /* set SMBus clock to 400 KHz */
- __outbyte (IoBase + 0x0E, 66000000 / 400000 / 4);
-}
-
-/*
- *
- * ReadSmbusByteData - read a single SPD byte from any offset
- *
- */
-
-STATIC
-AGESA_STATUS
-ReadSmbusByteData (
- IN UINT16 Iobase,
- IN UINT8 Address,
- OUT UINT8 *ByteData,
- IN UINTN Offset
- )
-{
- UINTN Status;
- UINT64 Limit;
-
- Address |= 1; // set read bit
-
- __outbyte (Iobase + 0, 0xFF); // clear error status
- __outbyte (Iobase + 1, 0x1F); // clear error status
- __outbyte (Iobase + 3, Offset); // offset in eeprom
- __outbyte (Iobase + 4, Address); // slave address and read bit
- __outbyte (Iobase + 2, 0x48); // read byte command
-
- /* time limit to avoid hanging for unexpected error status (should never happen) */
- Limit = __rdtsc () + 2000000000 / 10;
- for (;;) {
- Status = __inbyte (Iobase);
- if (__rdtsc () > Limit) break;
- if ((Status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
- if ((Status & 1) == 1) continue; // HostBusy set, keep waiting
- break;
- }
-
- *ByteData = __inbyte (Iobase + 5);
- if (Status == 2) Status = 0; // check for done with no errors
- return Status;
-}
-/*
- *
- * WriteSmbusByteData - Write a single SPD byte onto any offset
- *
- */
-STATIC
-AGESA_STATUS
-WriteSmbusByteData (
- IN UINT16 Iobase,
- IN UINT8 Address,
- IN UINT8 ByteData,
- IN UINTN Offset
- )
-{
- UINTN Status;
- UINT64 Limit;
- Address &= 0xFE; // set write bit
-
- __outbyte (Iobase + 0, 0xFF); // clear error status
- __outbyte (Iobase + 1, 0x1F); // clear error status
- __outbyte (Iobase + 3, Offset); // offset in eeprom
- __outbyte (Iobase + 4, Address); // slave address and write bit
- __outbyte (Iobase + 5, ByteData); // offset in byte data //
- __outbyte (Iobase + 2, 0x48); // write byte command
- /* time limit to avoid hanging for unexpected error status (should never happen) */
- Limit = __rdtsc () + 2000000000 / 10;
- for (;;) {
- Status = __inbyte (Iobase);
- if (__rdtsc () > Limit) break;
- if ((Status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
- if ((Status & 1) == 1) continue; // HostBusy set, keep waiting
- break;
- }
- if (Status == 2) Status = 0; // check for done with no errors
- return Status;
-}
-
-/*
- *
- * ReadSmbusByte - read a single SPD byte from the default offset
- * this function is faster function readSmbusByteData
- *
- */
-
-STATIC
-AGESA_STATUS
-ReadSmbusByte (
- IN UINT16 Iobase,
- IN UINT8 Address,
- OUT UINT8 *Buffer
- )
-{
- UINTN Status;
- UINT64 Limit;
-
- __outbyte (Iobase + 0, 0xFF); // clear error status
- __outbyte (Iobase + 1, 0x1F); // clear error status
- __outbyte (Iobase + 2, 0x44); // read command
-
- // time limit to avoid hanging for unexpected error status
- Limit = __rdtsc () + 2000000000 / 10;
- for (;;) {
- Status = __inbyte (Iobase);
- if (__rdtsc () > Limit) break;
- if ((Status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
- if ((Status & 1) == 1) continue; // HostBusy set, keep waiting
- break;
- }
-
- Buffer [0] = __inbyte (Iobase + 5);
- if (Status == 2) Status = 0; // check for done with no errors
- return Status;
-}
-
-/*
- *
- * ReadSpd - Read one or more SPD bytes from a DIMM.
- * Start with offset zero and read sequentially.
- * Optimization relies on autoincrement to avoid
- * sending offset for every byte.
- * Reads 128 bytes in 7-8 ms at 400 KHz.
- *
- */
-
-STATIC
-AGESA_STATUS
-ReadSpd (
- IN UINT16 IoBase,
- IN UINT8 SmbusSlaveAddress,
- OUT UINT8 *Buffer,
- IN UINTN Count
- )
-{
- UINTN Index, Status;
-
- /* read the first byte using offset zero */
- Status = ReadSmbusByteData (IoBase, SmbusSlaveAddress, Buffer, 0);
- if (Status) return Status;
-
- /* read the remaining bytes using auto-increment for speed */
- for (Index = 1; Index < Count; Index++){
- Status = ReadSmbusByte (IoBase, SmbusSlaveAddress, &Buffer [Index]);
- if (Status) return Status;
- }
- return 0;
-}
-
-AGESA_STATUS
-AmdMemoryReadSPD (
- IN UINT32 Func,
- IN UINT32 Data,
- IN OUT AGESA_READ_SPD_PARAMS *SpdData
- )
-{
- AGESA_STATUS Status;
- UINT8 SmBusAddress = 0;
- UINTN Index;
- UINTN MaxSocket = DIMENSION (SpdAddrLookup);
-
- for (Index = 0; Index < MaxSocket; Index ++){
- if ((SpdData->SocketId == SpdAddrLookup[Index].SocketId) &&
- (SpdData->MemChannelId == SpdAddrLookup[Index].MemChannelId) &&
- (SpdData->DimmId == SpdAddrLookup[Index].DimmId)) {
- SmBusAddress = SpdAddrLookup[Index].SmbusAddress;
- break;
- }
- }
-
-
- if (SmBusAddress == 0) return AGESA_ERROR;
-
- SetupFch (SMBUS_BASE_ADDR);
-
- Status = WriteSmbusByteData (SMBUS_BASE_ADDR, LTC4305_SMBUS_ADDR, 0x80, 0x03);
-
- switch (SpdData->SocketId) {
- case 0:
- /* Switch onto the First CPU Socket SMBUS */
- WriteSmbusByteData (SMBUS_BASE_ADDR, LTC4305_SMBUS_ADDR, 0x80, 0x03);
- break;
- case 1:
- /* Switch onto the Second CPU Socket SMBUS */
- WriteSmbusByteData (SMBUS_BASE_ADDR, LTC4305_SMBUS_ADDR, 0x40, 0x03);
- break;
- default:
- /* Switch off two CPU Sockets SMBUS */
- WriteSmbusByteData (SMBUS_BASE_ADDR, LTC4305_SMBUS_ADDR, 0x00, 0x03);
- break;
- }
- Status = ReadSpd (SMBUS_BASE_ADDR, SmBusAddress, SpdData->Buffer, 256);
-
- /*Output SPD Debug Message*/
- printk(BIOS_EMERG, "file '%s',line %d, %s()\n", __FILE__, __LINE__, __func__);
- printk(BIOS_DEBUG, " Status = %d\n",Status);
- printk(BIOS_DEBUG, "SocketId MemChannelId SpdData->DimmId SmBusAddress Buffer\n");
- printk(BIOS_DEBUG, "%x, %x, %x, %x, %x\n", SpdData->SocketId, SpdData->MemChannelId, SpdData->DimmId, SmBusAddress, SpdData->Buffer);
-
- /* Switch off two CPU Sockets SMBUS */
- WriteSmbusByteData (SMBUS_BASE_ADDR, LTC4305_SMBUS_ADDR, 0x00, 0x03);
- return Status;
-}