summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorVadim Bendebury <vbendeb@chromium.org>2014-10-22 12:14:29 -0700
committerPatrick Georgi <pgeorgi@google.com>2015-04-14 12:16:05 +0200
commita45d5d3f34b372f256e0b87e62d9348f75bae526 (patch)
tree1c0a2c767e619e5a59d85ee41ece7f9db43881db /src/mainboard
parentdfdc2bac858c1b7a026b4619e07b8f6072171928 (diff)
downloadcoreboot-a45d5d3f34b372f256e0b87e62d9348f75bae526.tar.xz
storm: do not enable the ethernet switch by default
The ethernet switch, as soon as it is taken out of reset comes up in default (bridging) mode, which allows traffic to flow freely across the ports. Let's keep it in reset such that there is no cross port traffic happening while the device boots up. BRANCH=storm BUG=chrome-os-partner:32646 TEST=verified that the switch is held in reset during boot. Change-Id: Ia1dbb47d892d564145da17425a596bf9bad40d29 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 50551d8c9a44d1b63e0948070f6573adf7729d37 Original-Change-Id: I6bf698beddc98ce18fee6b3b39622e356c8cfbad Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/224989 Original-Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-on: http://review.coreboot.org/9465 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/storm/mainboard.c13
1 files changed, 6 insertions, 7 deletions
diff --git a/src/mainboard/google/storm/mainboard.c b/src/mainboard/google/storm/mainboard.c
index f1c36a8d63..69aecb148a 100644
--- a/src/mainboard/google/storm/mainboard.c
+++ b/src/mainboard/google/storm/mainboard.c
@@ -93,28 +93,27 @@ static void setup_tpm(void)
}
#define SW_RESET_GPIO 26
-static void deassert_sw_reset(void)
+static void assert_sw_reset(void)
{
if (board_id() == BOARD_ID_PROTO_0)
return;
/*
- * only proto0.2 and later care about this. This signal is eventually
- * driving the ehernet switch reset input, which is active low. But
- * since this signal gets inverted along the way, the GPIO needs to be
- * driven low to take the switch out of reset.
+ * only proto0.2 and later care about this. We want to keep the
+ * ethernet switch in reset, otherwise it comes up in default
+ * (bridging) mode.
*/
gpio_tlmm_config_set(SW_RESET_GPIO, FUNC_SEL_GPIO,
GPIO_PULL_UP, GPIO_4MA, GPIO_ENABLE);
- gpio_set(SW_RESET_GPIO, 0);
+ gpio_set(SW_RESET_GPIO, 1);
}
static void mainboard_init(device_t dev)
{
setup_mmu();
setup_usb();
- deassert_sw_reset();
+ assert_sw_reset();
setup_tpm();
/* Functionally a 0-cost no-op if NAND is not present */
board_nand_init();