summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@openbios.org>2004-03-25 09:31:10 +0000
committerStefan Reinauer <stepan@openbios.org>2004-03-25 09:31:10 +0000
commit01f887d9f8546be08b51a2752af0473ab51e4214 (patch)
tree6b0a7f8a2e4ade9bacf43de8d1251b71fa169913 /src/mainboard
parent7011f9f0fe2eb5622fc60c82786ef2ae6655c5f5 (diff)
downloadcoreboot-01f887d9f8546be08b51a2752af0473ab51e4214.tar.xz
Merging patches from Yinghai Lu (fb2_s4882_changes.diff.bz2):
- new motherboard: Tyan s4882 - minor changes to 2880, s2881, s2885, s4880 git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1474 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/tyan/s2880/Config.lb3
-rw-r--r--src/mainboard/tyan/s2880/mainboard.c6
-rw-r--r--src/mainboard/tyan/s2881/auto.c5
-rw-r--r--src/mainboard/tyan/s2881/mainboard.c6
-rw-r--r--src/mainboard/tyan/s2882/Config.lb3
-rw-r--r--src/mainboard/tyan/s2885/Config.lb1
-rw-r--r--src/mainboard/tyan/s2885/auto.c9
-rw-r--r--src/mainboard/tyan/s2885/mainboard.c8
-rw-r--r--src/mainboard/tyan/s4880/Config.lb4
-rw-r--r--src/mainboard/tyan/s4880/auto.c9
-rw-r--r--src/mainboard/tyan/s4882/Config.lb245
-rw-r--r--src/mainboard/tyan/s4882/VERSION1
-rw-r--r--src/mainboard/tyan/s4882/auto.c277
-rw-r--r--src/mainboard/tyan/s4882/chip.h6
-rw-r--r--src/mainboard/tyan/s4882/cmos.layout96
-rw-r--r--src/mainboard/tyan/s4882/failover.c80
-rw-r--r--src/mainboard/tyan/s4882/irq_tables.c46
-rw-r--r--src/mainboard/tyan/s4882/mainboard.c192
-rw-r--r--src/mainboard/tyan/s4882/mptable.c198
-rw-r--r--src/mainboard/tyan/s4882/resourcemap.c264
20 files changed, 1430 insertions, 29 deletions
diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb
index 275170ac9f..892429686d 100644
--- a/src/mainboard/tyan/s2880/Config.lb
+++ b/src/mainboard/tyan/s2880/Config.lb
@@ -32,7 +32,7 @@ default LB_CKS_LOC=123
driver mainboard.o
-#driver lsi_scsi.o
+driver lsi_scsi.o
#driver adaptec_scsi.o
#driver promise_sata.o
#driver intel_nic.o
@@ -179,6 +179,7 @@ northbridge amd/amdk8 "mc0"
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
+ irq 0x72 = 12
pnp 2e.6 off # CIR
pnp 2e.7 off # GAME_MIDI_GIPO1
pnp 2e.8 off # GPIO2
diff --git a/src/mainboard/tyan/s2880/mainboard.c b/src/mainboard/tyan/s2880/mainboard.c
index c8521963d8..17ceb5d916 100644
--- a/src/mainboard/tyan/s2880/mainboard.c
+++ b/src/mainboard/tyan/s2880/mainboard.c
@@ -120,7 +120,7 @@ static void onboard_scsi_fixup(void)
// print_mem();
// amd8111_enable_rom();
}
-#if 1
+#if 0
static void vga_fixup(void) {
// we do this right here because:
// - all the hardware is working, and some VGA bioses seem to need
@@ -154,8 +154,8 @@ enable(struct chip *chip, enum chip_pass pass)
case CONF_PASS_PRE_BOOT:
if (conf->fixup_scsi)
onboard_scsi_fixup();
- if (conf->fixup_vga)
- vga_fixup();
+// if (conf->fixup_vga)
+// vga_fixup();
printk_debug("mainboard fixup pass %d done\r\n",
pass);
break;
diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c
index 5f5069cc97..be11efb4ed 100644
--- a/src/mainboard/tyan/s2881/auto.c
+++ b/src/mainboard/tyan/s2881/auto.c
@@ -113,9 +113,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
return smbus_read_byte(device, address);
}
-/* include mainboard specific ht code */
-#include "hypertransport.c"
-
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
@@ -166,7 +163,7 @@ static void main(void)
console_init();
setup_s2881_resource_map();
needs_reset = setup_coherent_ht_domain();
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
+ needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xc0);
if (needs_reset) {
print_info("ht reset -");
soft_reset();
diff --git a/src/mainboard/tyan/s2881/mainboard.c b/src/mainboard/tyan/s2881/mainboard.c
index aa99f64894..3ba458866c 100644
--- a/src/mainboard/tyan/s2881/mainboard.c
+++ b/src/mainboard/tyan/s2881/mainboard.c
@@ -120,7 +120,7 @@ static void onboard_scsi_fixup(void)
// print_mem();
// amd8111_enable_rom();
}
-#if 1
+#if 0
static void vga_fixup(void) {
// we do this right here because:
// - all the hardware is working, and some VGA bioses seem to need
@@ -154,8 +154,8 @@ enable(struct chip *chip, enum chip_pass pass)
case CONF_PASS_PRE_BOOT:
if (conf->fixup_scsi)
onboard_scsi_fixup();
- if (conf->fixup_vga)
- vga_fixup();
+// if (conf->fixup_vga)
+// vga_fixup();
printk_debug("mainboard fixup pass %d done\r\n",
pass);
break;
diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb
index c307568267..c62ea733da 100644
--- a/src/mainboard/tyan/s2882/Config.lb
+++ b/src/mainboard/tyan/s2882/Config.lb
@@ -35,7 +35,7 @@ default LB_CKS_LOC=123
driver mainboard.o
#driver adaptec_scsi.o
#driver si_sata.o
-driver intel_nic.o
+#driver intel_nic.o
#driver broadcom_nic.o
#object reset.o
if HAVE_MP_TABLE object mptable.o end
@@ -196,6 +196,7 @@ northbridge amd/amdk8 "mc0"
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
+ irq 0x72 = 12
pnp 2e.6 off # CIR
pnp 2e.7 off # GAME_MIDI_GIPO1
pnp 2e.8 off # GPIO2
diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
index c0b61145cb..db6b2f030c 100644
--- a/src/mainboard/tyan/s2885/Config.lb
+++ b/src/mainboard/tyan/s2885/Config.lb
@@ -198,6 +198,7 @@ northbridge amd/amdk8 "mc0"
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
+ irq 0x72 = 12
pnp 2e.6 off # CIR
pnp 2e.7 off # GAME_MIDI_GIPO1
pnp 2e.8 off # GPIO2
diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c
index 135418bdcb..307331375c 100644
--- a/src/mainboard/tyan/s2885/auto.c
+++ b/src/mainboard/tyan/s2885/auto.c
@@ -29,7 +29,7 @@ static void hard_reset(void)
set_bios_reset();
/* enable cf9 */
- pci_write_config8(PCI_DEV(1, 0x04, 3), 0x41, 0xf1);
+ pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
/* reset */
outb(0x0e, 0x0cf9);
}
@@ -37,7 +37,7 @@ static void hard_reset(void)
static void soft_reset(void)
{
set_bios_reset();
- pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1);
+ pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
}
#define REV_B_RESET 0
@@ -114,9 +114,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
return smbus_read_byte(device, address);
}
-/* include mainboard specific ht code */
-#include "hypertransport.c"
-
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
@@ -167,7 +164,7 @@ static void main(void)
console_init();
setup_s2885_resource_map();
needs_reset = setup_coherent_ht_domain();
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
+ needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xc0);
if (needs_reset) {
print_info("ht reset -");
soft_reset();
diff --git a/src/mainboard/tyan/s2885/mainboard.c b/src/mainboard/tyan/s2885/mainboard.c
index cd2a9679fa..e142f1b6d7 100644
--- a/src/mainboard/tyan/s2885/mainboard.c
+++ b/src/mainboard/tyan/s2885/mainboard.c
@@ -119,7 +119,7 @@ static void onboard_scsi_fixup(void)
// print_mem();
// amd8111_enable_rom();
}
-
+#if 0
static void vga_fixup(void) {
// we do this right here because:
// - all the hardware is working, and some VGA bioses seem to need
@@ -136,6 +136,8 @@ static void vga_fixup(void) {
#endif
}
+
+#endif
static void
@@ -153,8 +155,8 @@ enable(struct chip *chip, enum chip_pass pass)
case CONF_PASS_PRE_BOOT:
if (conf->fixup_scsi)
onboard_scsi_fixup();
- if (conf->fixup_vga)
- vga_fixup();
+// if (conf->fixup_vga)
+// vga_fixup();
printk_debug("mainboard fixup pass %d done\r\n",
pass);
break;
diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb
index 69e647984f..4f85e44252 100644
--- a/src/mainboard/tyan/s4880/Config.lb
+++ b/src/mainboard/tyan/s4880/Config.lb
@@ -33,9 +33,9 @@ default LB_CKS_RANGE_END=122
default LB_CKS_LOC=123
driver mainboard.o
-#driver lsi_scsi.o
+driver lsi_scsi.o
#driver adaptec_scsi.o
-#driver si_sata.o
+driver si_sata.o
#driver intel_nic.o
#object reset.o
if HAVE_MP_TABLE object mptable.o end
diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c
index 031020323a..8f291f0964 100644
--- a/src/mainboard/tyan/s4880/auto.c
+++ b/src/mainboard/tyan/s4880/auto.c
@@ -28,7 +28,7 @@ static void hard_reset(void)
set_bios_reset();
/* enable cf9 */
- pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
+ pci_write_config8(PCI_DEV(1, 0x04, 3), 0x41, 0xf1);
/* reset */
outb(0x0e, 0x0cf9);
}
@@ -36,7 +36,7 @@ static void hard_reset(void)
static void soft_reset(void)
{
set_bios_reset();
- pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
+ pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1);
}
@@ -121,11 +121,8 @@ static inline int spd_read_byte(unsigned device, unsigned address)
return smbus_read_byte(device, address);
}
-/* include mainboard specific ht code */
-#include "hypertransport.c"
-
-
#include "northbridge/amd/amdk8/raminit.c"
+
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb
new file mode 100644
index 0000000000..ea826238b5
--- /dev/null
+++ b/src/mainboard/tyan/s4882/Config.lb
@@ -0,0 +1,245 @@
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD
+uses ARCH
+uses HARD_RESET_BUS
+uses HARD_RESET_DEVICE
+uses HARD_RESET_FUNCTION
+
+#
+#
+###
+### Set all of the defaults for an x86 architecture
+###
+#
+#
+###
+### Build the objects we have code for in this directory.
+###
+##object mainboard.o
+config chip.h
+register "fixup_scsi" = "1"
+#register "fixup_vga" = "1"
+
+
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+driver mainboard.o
+driver lsi_scsi.o
+#driver adaptec_scsi.o
+driver si_sata.o
+#driver intel_nic.o
+#object reset.o
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+#
+default HARD_RESET_BUS=1
+default HARD_RESET_DEVICE=4
+default HARD_RESET_FUNCTION=0
+#
+arch i386 end
+#cpu k8 end
+#
+###
+### Build our 16 bit and 32 bit linuxBIOS entry code
+###
+mainboardinit cpu/i386/entry16.inc
+mainboardinit cpu/i386/entry32.inc
+mainboardinit cpu/i386/bist32.inc
+ldscript /cpu/i386/entry16.lds
+ldscript /cpu/i386/entry32.lds
+#
+###
+### Build our reset vector (This is where linuxBIOS is entered)
+###
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/i386/reset16.inc
+ ldscript /cpu/i386/reset16.lds
+else
+ mainboardinit cpu/i386/reset32.inc
+ ldscript /cpu/i386/reset32.lds
+end
+#
+#### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+#
+###
+### Include an id string (For safe flashing)
+###
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+#
+####
+#### This is the early phase of linuxBIOS startup
+#### Things are delicate and we test to see if we should
+#### failover to another image.
+####
+#option MAX_REBOOT_CNT=2
+if USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
+end
+#
+###
+### Setup our mtrrs
+###
+mainboardinit cpu/k8/earlymtrr.inc
+###
+### Only the bootstrap cpu makes it here.
+### Failover if we need to
+###
+#
+if USE_FALLBACK_IMAGE
+ mainboardinit ./failover.inc
+end
+
+#
+#
+###
+### Setup the serial port
+###
+mainboardinit pc80/serial.inc
+mainboardinit arch/i386/lib/console.inc
+mainboardinit cpu/i386/bist32_fail.inc
+#
+####
+#### O.k. We aren't just an intermediary anymore!
+####
+#
+###
+### Romcc output
+###
+#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E"
+#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc"
+#mainboardinit .failover.inc
+
+makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c"
+ action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
+end
+
+makerule ./failover.inc
+ depends "./romcc ./failover.E"
+ action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end
+
+makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c option_table.h"
+ action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+end
+makerule ./auto.inc
+ depends "./romcc ./auto.E"
+ action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E"
+# action "./romcc -mcpu=k8 -O ./auto.E > auto.inc"
+end
+mainboardinit cpu/k8/enable_mmx_sse.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/k8/disable_mmx_sse.inc
+#
+###
+### Include the secondary Configuration files
+###
+northbridge amd/amdk8 "mc0"
+ pci 0:18.0
+ pci 0:18.0
+ pci 0:18.0
+ pci 0:18.1
+ pci 0:18.2
+ pci 0:18.3
+ southbridge amd/amd8131 "amd8131" link 1
+ pci 0:0.0
+ pci 0:0.1
+ pci 0:1.0
+ pci 0:1.1
+ end
+ southbridge amd/amd8111 "amd8111" link 1
+ pci 0:0.0
+ pci 0:1.0 on
+ pci 0:1.1 on
+ pci 0:1.2 on
+ pci 0:1.3 on
+ pci 0:1.5 off
+ pci 0:1.6 off
+ pci 1:0.0 on
+ pci 1:0.1 on
+ pci 1:0.2 on
+ pci 1:1.0 off
+ superio winbond/w83627hf link 1
+ pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ pnp 2e.3 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ pnp 2e.6 off # CIR
+ pnp 2e.7 off # GAME_MIDI_GIPO1
+ pnp 2e.8 off # GPIO2
+ pnp 2e.9 off # GPIO3
+ pnp 2e.a off # ACPI
+ pnp 2e.b off # HW Monitor
+ end
+ end
+end
+
+northbridge amd/amdk8 "mc1"
+ pci 0:19.0
+ pci 0:19.0
+ pci 0:19.0
+ pci 0:19.1
+ pci 0:19.2
+ pci 0:19.3
+end
+
+northbridge amd/amdk8 "mc2"
+ pci 0:1a.0
+ pci 0:1a.0
+ pci 0:1a.0
+ pci 0:1a.1
+ pci 0:1a.2
+ pci 0:1a.3
+end
+
+
+northbridge amd/amdk8 "mc3"
+ pci 0:1b.0
+ pci 0:1b.0
+ pci 0:1b.0
+ pci 0:1b.1
+ pci 0:1b.2
+ pci 0:1b.3
+end
+
+
+dir /pc80
+#dir /bioscall
+
+cpu k8 "cpu0"
+ register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}"
+end
+
+cpu k8 "cpu1"
+end
+
+cpu k8 "cpu2"
+end
+
+cpu k8 "cpu3"
+end
diff --git a/src/mainboard/tyan/s4882/VERSION b/src/mainboard/tyan/s4882/VERSION
new file mode 100644
index 0000000000..cd5ac039d6
--- /dev/null
+++ b/src/mainboard/tyan/s4882/VERSION
@@ -0,0 +1 @@
+2.0
diff --git a/src/mainboard/tyan/s4882/auto.c b/src/mainboard/tyan/s4882/auto.c
new file mode 100644
index 0000000000..bbf1df9927
--- /dev/null
+++ b/src/mainboard/tyan/s4882/auto.c
@@ -0,0 +1,277 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/k8/apic_timer.c"
+#include "lib/delay.c"
+#include "cpu/p6/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "northbridge/amd/amdk8/debug.c"
+#include "northbridge/amd/amdk8/cpu_rev.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
+static void hard_reset(void)
+{
+ set_bios_reset();
+
+ /* enable cf9 */
+ pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
+ /* reset */
+ outb(0x0e, 0x0cf9);
+}
+
+static void soft_reset(void)
+{
+ set_bios_reset();
+ pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
+}
+
+
+#define REV_B_RESET 0
+static void memreset_setup(void)
+{
+#if REV_B_RESET==1
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
+#else
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
+#endif
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+ udelay(800);
+#if REV_B_RESET==1
+ outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+#endif
+ udelay(90);
+}
+
+static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes)
+{
+ /* Routing Table Node i
+ *
+ * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c
+ * i: 0, 1, 2, 3, 4, 5, 6, 7
+ *
+ * [ 0: 3] Request Route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ * [11: 8] Response Route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ * [19:16] Broadcast route
+ * [0] Route to this node
+ * [1] Route to Link 0
+ * [2] Route to Link 1
+ * [3] Route to Link 2
+ */
+ uint32_t ret=0x00010101; /* default row entry */
+
+
+ static const unsigned int rows_4p[4][4] = {
+ { 0x000b0101, 0x00010202, 0x00030808, 0x00010208 },
+ { 0x00010202, 0x00070101, 0x00010204, 0x00030404 },
+ { 0x00030404, 0x00010204, 0x00070101, 0x00010202 },
+ { 0x00010208, 0x00030808, 0x00010202, 0x000b0101 }
+ };
+
+ if (!(node>=maxnodes || row>=maxnodes)) {
+ ret=rows_4p[node][row];
+ }
+
+ return ret;
+}
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+#define SMBUS_HUB 0x18
+ unsigned device=(ctrl->channel0[0])>>8;
+ smbus_write_byte(SMBUS_HUB , 0x01, device);
+ smbus_write_byte(SMBUS_HUB , 0x03, 0);
+}
+#if 0
+static inline void change_i2c_mux(unsigned device)
+{
+#define SMBUS_HUB 0x18
+ smbus_write_byte(SMBUS_HUB , 0x01, device);
+ smbus_write_byte(SMBUS_HUB , 0x03, 0);
+}
+#endif
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#include "northbridge/amd/amdk8/raminit.c"
+
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "sdram/generic_sdram.c"
+
+#include "resourcemap.c" /* tyan does not want the default */
+
+#define FIRST_CPU 1
+#define SECOND_CPU 1
+
+#define THIRD_CPU 1
+#define FOURTH_CPU 1
+
+#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU)
+
+#define RC0 ((1<<1)<<8)
+#define RC1 ((1<<2)<<8)
+#define RC2 ((1<<3)<<8)
+#define RC3 ((1<<4)<<8)
+
+#define DIMM0 0x50
+#define DIMM1 0x51
+#define DIMM2 0x52
+#define DIMM3 0x53
+
+static void main(void)
+{
+ static const struct mem_controller cpu[] = {
+#if FIRST_CPU
+ {
+ .node_id = 0,
+ .f0 = PCI_DEV(0, 0x18, 0),
+ .f1 = PCI_DEV(0, 0x18, 1),
+ .f2 = PCI_DEV(0, 0x18, 2),
+ .f3 = PCI_DEV(0, 0x18, 3),
+ .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 },
+ .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 },
+ },
+#endif
+#if SECOND_CPU
+ {
+ .node_id = 1,
+ .f0 = PCI_DEV(0, 0x19, 0),
+ .f1 = PCI_DEV(0, 0x19, 1),
+ .f2 = PCI_DEV(0, 0x19, 2),
+ .f3 = PCI_DEV(0, 0x19, 3),
+ .channel0 = { RC1|DIMM0, RC1|DIMM2 , 0, 0 },
+ .channel1 = { RC1|DIMM1, RC1|DIMM3 , 0, 0 },
+
+ },
+#endif
+
+#if THIRD_CPU
+ {
+ .node_id = 2,
+ .f0 = PCI_DEV(0, 0x1a, 0),
+ .f1 = PCI_DEV(0, 0x1a, 1),
+ .f2 = PCI_DEV(0, 0x1a, 2),
+ .f3 = PCI_DEV(0, 0x1a, 3),
+ .channel0 = { RC2|DIMM0, RC2|DIMM2, 0, 0 },
+ .channel1 = { RC2|DIMM1, RC2|DIMM3, 0, 0 },
+
+ },
+#endif
+#if FOURTH_CPU
+ {
+ .node_id = 3,
+ .f0 = PCI_DEV(0, 0x1b, 0),
+ .f1 = PCI_DEV(0, 0x1b, 1),
+ .f2 = PCI_DEV(0, 0x1b, 2),
+ .f3 = PCI_DEV(0, 0x1b, 3),
+ .channel0 = { RC3|DIMM0, RC3|DIMM2, 0, 0 },
+ .channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 },
+
+ },
+#endif
+ };
+ int i;
+ int needs_reset;
+ enable_lapic();
+ init_timer();
+ if (cpu_init_detected()) {
+ asm("jmp __cpu_reset");
+ }
+ distinguish_cpu_resets();
+ if (!boot_cpu()) {
+ stop_this_cpu();
+ }
+ w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
+ setup_s4882_resource_map();
+ needs_reset = setup_coherent_ht_domain();
+ needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xa0);
+#if 0
+ dump_pci_device(PCI_DEV(0, 4, 0));
+#endif
+ if (needs_reset) {
+ print_info("ht reset -");
+ soft_reset();
+ }
+
+#if 0
+ dump_pci_devices();
+#endif
+ enable_smbus();
+#if 0
+
+// activate_spd_rom(&cpu[0]);
+// dump_spd_registers(&cpu[0]);
+
+// for(i=0;i<4;i++) {
+// activate_spd_rom(&cpu[i]);
+// dump_smbus_registers();
+// }
+ for(i=1;i<256;i=i*2) {
+ change_i2c_mux(i);
+ dump_smbus_registers();
+ }
+
+#endif
+ memreset_setup();
+ sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
+
+#if 0
+ dump_pci_devices();
+#endif
+#if 0
+ dump_pci_device(PCI_DEV(0, 0x18, 1));
+#endif
+
+ /* Check all of memory */
+#if 0
+ msr_t msr;
+ msr = rdmsr(TOP_MEM2);
+ print_debug("TOP_MEM2: ");
+ print_debug_hex32(msr.hi);
+ print_debug_hex32(msr.lo);
+ print_debug("\r\n");
+#endif
+/*
+#if 0
+ ram_check(0x00000000, msr.lo+(msr.hi<<32));
+#else
+#if TOTAL_CPUS < 2
+ // Check 16MB of memory @ 0
+ ram_check(0x00000000, 0x01000000);
+#else
+ // Check 16MB of memory @ 2GB
+ ram_check(0x80000000, 0x81000000);
+#endif
+#endif
+*/
+}
diff --git a/src/mainboard/tyan/s4882/chip.h b/src/mainboard/tyan/s4882/chip.h
new file mode 100644
index 0000000000..7eb925df36
--- /dev/null
+++ b/src/mainboard/tyan/s4882/chip.h
@@ -0,0 +1,6 @@
+extern struct chip_control mainboard_tyan_s4882_control;
+
+struct mainboard_tyan_s4882_config {
+ int fixup_scsi;
+// int fixup_vga;
+};
diff --git a/src/mainboard/tyan/s4882/cmos.layout b/src/mainboard/tyan/s4882/cmos.layout
new file mode 100644
index 0000000000..247715e6ac
--- /dev/null
+++ b/src/mainboard/tyan/s4882/cmos.layout
@@ -0,0 +1,96 @@
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 reserved_memory
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 200Mhz
+8 1 166Mhz
+8 2 133Mhz
+8 3 100Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/tyan/s4882/failover.c b/src/mainboard/tyan/s4882/failover.c
new file mode 100644
index 0000000000..b22abfea06
--- /dev/null
+++ b/src/mainboard/tyan/s4882/failover.c
@@ -0,0 +1,80 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
+#include "pc80/mc146818rtc_early.c"
+#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+#include "cpu/p6/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+
+#define HAVE_REGPARM_SUPPORT 0
+#if HAVE_REGPARM_SUPPORT
+static unsigned long main(unsigned long bist)
+{
+#else
+static void main(void)
+{
+ unsigned long bist = 0;
+#endif
+ /* Make cerain my local apic is useable */
+ enable_lapic();
+
+ /* Is this a cpu only reset? */
+ if (cpu_init_detected()) {
+ if (last_boot_normal()) {
+ goto normal_image;
+ } else {
+ goto cpu_reset;
+ }
+ }
+ /* Is this a secondary cpu? */
+ if (!boot_cpu()) {
+ if (last_boot_normal()) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* Setup the 8111 */
+ amd8111_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal()) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+ normal_image:
+ asm("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist) /* inputs */
+ : /* clobbers */
+ );
+ cpu_reset:
+ asm("jmp __cpu_reset"
+ : /* outputs */
+ : "a"(bist) /* inputs */
+ : /* clobbers */
+ );
+ fallback_image:
+#if HAVE_REGPARM_SUPPORT
+ return bist;
+#else
+ return;
+#endif
+}
diff --git a/src/mainboard/tyan/s4882/irq_tables.c b/src/mainboard/tyan/s4882/irq_tables.c
new file mode 100644
index 0000000000..dd293ca966
--- /dev/null
+++ b/src/mainboard/tyan/s4882/irq_tables.c
@@ -0,0 +1,46 @@
+/* This file was generated by getpir.c, do not modify!
+ (but if you do, please run checkpir on it to verify)
+ Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+ Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE, /* u32 signature */
+ PIRQ_VERSION, /* u16 version */
+ 32+16*22, /* there can be total 22 devices on the bus */
+ 1, /* Where the interrupt router lies (bus) */
+ (4<<3)|3, /* Where the interrupt router lies (dev) */
+ 0, /* IRQs devoted exclusively to PCI usage */
+ 0x1022, /* Vendor */
+ 0x7400, /* Device */
+ 0, /* Crap (miniport) */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+ 0x9a, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+ {
+ {0,0xc0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {1,(3<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0x4,0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0x4, 0xdef8}}, 0, 0},
+ {0x4,0x8, {{0x1, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0x4,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0},
+ {0x4,0x18, {{0x2, 0xdef8}, {0x1, 0xdef8}, {0x3, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0x4,0x28, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0x4,0x30, {{0x3, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {1,(4<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {1,(1<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0x2,0x18, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x2, 0},
+ {0x2,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x3, 0},
+ {0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0x2,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {1,(2<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0x3,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x4, 0},
+ {0x3,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0},
+ {0x3,0x20, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0},
+ {0x3,0x28, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0},
+ {0,0xc8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0,0xd0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0,0xd8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ }
+};
diff --git a/src/mainboard/tyan/s4882/mainboard.c b/src/mainboard/tyan/s4882/mainboard.c
new file mode 100644
index 0000000000..32e1a31fd2
--- /dev/null
+++ b/src/mainboard/tyan/s4882/mainboard.c
@@ -0,0 +1,192 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/chip.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "../../../northbridge/amd/amdk8/northbridge.h"
+#include "chip.h"
+//#include <part/mainboard.h>
+//#include "lsi_scsi.c"
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
+{
+ 0,1,2,3
+};
+#if 0
+static void fixup_lsi_53c1030(struct device *pdev)
+{
+// uint8_t byte;
+ uint16_t word;
+
+ byte = 1;
+ pci_write_config8(pdev, 0xff, byte);
+ // Set the device id
+// pci_write_config_word(pdev, PCI_DEVICE_ID, PCI_DEVICE_ID_LSILOGIC_53C1030);
+ // Set the subsytem vendor id
+// pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, PCI_VENDOR_ID_TYAN);
+ word = 0x10f1;
+ pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, word);
+ // Set the subsytem id
+ word = 0x4882;
+ pci_write_config16(pdev, PCI_SUBSYSTEM_ID, word);
+ // Disable writes to the device id
+ byte = 0;
+ pci_write_config8(pdev, 0xff, byte);
+
+// lsi_scsi_init(pdev);
+
+}
+#endif
+//extern static void lsi_scsi_init(struct device *dev);
+#if 0
+static void print_pci_regs(struct device *dev)
+{
+ uint8_t byte;
+ int i;
+
+ for(i=0;i<256;i++) {
+ byte = pci_read_config8(dev, i);
+
+ if((i%16)==0) printk_debug("\n%02x:",i);
+ printk_debug(" %02x",byte);
+ }
+ printk_debug("\n");
+
+// pci_write_config8(dev, 0x4, byte);
+
+}
+#endif
+#if 0
+static void print_mem(void)
+{
+ int i;
+ int low_1MB = 0;
+ for(i=low_1MB;i<low_1MB+1024*4;i++) {
+ if((i%16)==0) printk_debug("\n %08x:",i);
+ printk_debug(" %02x ",(unsigned char)*((unsigned char *)i));
+ }
+
+ for(i=low_1MB;i<low_1MB+1024*4;i++) {
+ if((i%16)==0) printk_debug("\n %08x:",i);
+ printk_debug(" %c ",(unsigned char)*((unsigned char *)i));
+ }
+ }
+#endif
+#if 0
+static void amd8111_enable_rom(void)
+{
+ uint8_t byte;
+ struct device *dev;
+
+ /* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */
+ /* Locate the amd8111 */
+ dev = dev_find_device(0x1022, 0x7468, 0);
+
+ /* Set the 4MB enable bit bit */
+ byte = pci_read_config8(dev, 0x43);
+ byte |= 0x80;
+ pci_write_config8(dev, 0x43, byte);
+}
+#endif
+#if 0
+static void onboard_scsi_fixup(void)
+{
+ struct device *dev;
+#if 0
+ unsigned char i,j,k;
+
+ for(i=0;i<=6;i++) {
+ for(j=0;j<=0x1f;j++) {
+ for (k=0;k<=6;k++){
+ dev = dev_find_slot(i, PCI_DEVFN(j, k));
+ if (dev) {
+ printk_debug("%02x:%02x:%02x",i,j,k);
+ print_pci_regs(dev);
+ }
+ }
+ }
+ }
+#endif
+
+
+#if 0
+ dev = dev_find_device(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030,0);
+ if(!dev) {
+ printk_info("LSI_SCSI_FW_FIXUP: No Device Found!");
+ return;
+ }
+
+ lsi_scsi_init(dev);
+#endif
+// print_mem();
+// amd8111_enable_rom();
+}
+#endif
+#if 0
+static void vga_fixup(void) {
+ // we do this right here because:
+ // - all the hardware is working, and some VGA bioses seem to need
+ // that
+ // - we need page 0 below for linuxbios tables.
+#if CONFIG_REALMODE_IDT == 1
+ printk_debug("INSTALL REAL-MODE IDT\n");
+ setup_realmode_idt();
+#endif
+#if CONFIG_VGABIOS == 1
+ printk_debug("DO THE VGA BIOS\n");
+ do_vgabios();
+ post_code(0x93);
+#endif
+
+}
+#endif
+
+static void
+enable(struct chip *chip, enum chip_pass pass)
+{
+
+ struct mainboard_tyan_s4882_config *conf =
+ (struct mainboard_tyan_s4882_config *)chip->chip_info;
+
+ switch (pass) {
+ default: break;
+// case CONF_PASS_PRE_CONSOLE:
+// case CONF_PASS_PRE_PCI:
+// case CONF_PASS_POST_PCI:
+ case CONF_PASS_PRE_BOOT:
+// if (conf->fixup_scsi)
+// onboard_scsi_fixup();
+// if (conf->fixup_vga)
+// vga_fixup();
+ printk_debug("mainboard fixup pass %d done\r\n",
+ pass);
+ break;
+ }
+
+}
+static struct device_operations mainboard_operations = {
+ .read_resources = root_dev_read_resources,
+ .set_resources = root_dev_set_resources,
+ .enable_resources = enable_childrens_resources,
+ .init = 0,
+ .scan_bus = amdk8_scan_root_bus,
+ .enable = 0,
+};
+
+static void enumerate(struct chip *chip)
+{
+ struct chip *child;
+ dev_root.ops = &mainboard_operations;
+ chip->dev = &dev_root;
+ chip->bus = 0;
+ for(child = chip->children; child; child = child->next) {
+ child->bus = &dev_root.link[0];
+ }
+}
+struct chip_control mainboard_tyan_s4882_control = {
+ .enable = enable,
+ .enumerate = enumerate,
+ .name = "Tyan s4882 mainboard ",
+};
+
+
diff --git a/src/mainboard/tyan/s4882/mptable.c b/src/mainboard/tyan/s4882/mptable.c
new file mode 100644
index 0000000000..a95680e512
--- /dev/null
+++ b/src/mainboard/tyan/s4882/mptable.c
@@ -0,0 +1,198 @@
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+
+void *smp_write_config_table(void *v, unsigned long * processor_map)
+{
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "TYAN ";
+ static const char productid[12] = "S48822 ";
+ struct mp_config_table *mc;
+
+ unsigned char bus_num;
+ unsigned char bus_isa;
+ unsigned char bus_8131_1;
+ unsigned char bus_8131_2;
+ unsigned char bus_8111_1;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc, processor_map);
+
+
+ {
+ device_t dev;
+
+ /* 8111 */
+ dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
+ if (dev) {
+ bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
+
+ bus_8111_1 = 4;
+ bus_isa = 5;
+ }
+ /* 8131-1 */
+ dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
+ if (dev) {
+ bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
+
+ bus_8131_1 = 2;
+ }
+ /* 8131-2 */
+ dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
+ if (dev) {
+ bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
+
+ bus_8131_2 = 3;
+ }
+ }
+
+/*Bus: Bus ID Type*/
+ /* define bus and isa numbers */
+ for(bus_num = 0; bus_num < bus_isa; bus_num++) {
+ smp_write_bus(mc, bus_num, "PCI ");
+ }
+ smp_write_bus(mc, bus_isa, "ISA ");
+
+
+/*I/O APICs: APIC ID Version State Address*/
+ smp_write_ioapic(mc, 4, 0x11, 0xfec00000);
+ {
+ struct pci_dev *dev;
+ uint32_t base;
+ dev = dev_find_slot(1, PCI_DEVFN(0x1,1));
+ if (dev) {
+ base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
+ base &= PCI_BASE_ADDRESS_MEM_MASK;
+ smp_write_ioapic(mc, 5, 0x11, base);
+ }
+ dev = dev_find_slot(1, PCI_DEVFN(0x2,1));
+ if (dev) {
+ base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
+ base &= PCI_BASE_ADDRESS_MEM_MASK;
+ smp_write_ioapic(mc, 6, 0x11, base);
+ }
+ }
+
+/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
+*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x4, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, 0x4, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x4, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, 0x4, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, 0x4, 0x4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x5, 0x4, 0x5);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, 0x4, 0x6);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, 0x4, 0x7);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, 0x4, 0x8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x9, 0x4, 0x9);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xa, 0x4, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xb, 0x4, 0xb);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, 0x4, 0xc);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, 0x4, 0xd);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, 0x4, 0xe);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, 0x4, 0xf);
+
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 1, (4<<2)|0, 0x4, 0x13);
+
+
+//On Board AMD USB
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, 0x4, 0x13);
+
+//On Board Via USB 1.1 and 2
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|0, 0x4, 0x11); //1.1
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|1, 0x4, 0x12); //1.1
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|2, 0x4, 0x10); //2
+
+//Slot 5 PCI 32
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|0, 0x4, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|1, 0x4, 0x11);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|2, 0x4, 0x12); //
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|3, 0x4, 0x13); //
+
+
+//On Board SI Serial ATA
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, 0x4, 0x13);
+//On Board ATI Display Adapter
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, 0x4, 0x12);
+
+
+//Slot 4 PCIX 100/66
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|0, 0x5, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|1, 0x5, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, 0x5, 0x1);//
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, 0x5, 0x2);//
+
+//Slot 3 PCIX 100/66
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, 0x5, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, 0x5, 0x3);//
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, 0x5, 0x0);//
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|3, 0x5, 0x1);//
+
+//On Board LSI scsi and NIC
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|0, 0x5, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|1, 0x5, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, 0x5, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, 0x5, 0x1);
+
+//Slot 2 PCI-X 133/100/66
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, 0x6, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, 0x6, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, 0x6, 0x2); //
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, 0x6, 0x3); //
+
+//Slot 1 PCI-X 133/100/66
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|0, 0x6, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|1, 0x6, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|2, 0x6, 0x3);//
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|3, 0x6, 0x0);//
+
+/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ printk_debug("Wrote the mp table end at: %p - %p\n",
+ mc, smp_next_mpe_entry(mc));
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v, processor_map);
+}
diff --git a/src/mainboard/tyan/s4882/resourcemap.c b/src/mainboard/tyan/s4882/resourcemap.c
new file mode 100644
index 0000000000..423ac3cf00
--- /dev/null
+++ b/src/mainboard/tyan/s4882/resourcemap.c
@@ -0,0 +1,264 @@
+/*
+ * Tyan S4882 needs a different resource map
+ *
+ */
+
+static void setup_s4882_resource_map(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff10,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff010,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration regin i
+ */
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000103,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+ };
+ int max;
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ setup_resource_map(register_values, max);
+}
+