summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorAamir Bohra <aamir.bohra@intel.com>2018-07-01 00:13:29 +0530
committerSubrata Banik <subrata.banik@intel.com>2018-12-10 12:07:43 +0000
commitdf47e1c3e590c4aeb2e1dcd32dca194f91327e3f (patch)
treeeee5a8b17496782aa8e70ea11ca8cb67711b842e /src/mainboard
parent2b35780a277bd48bb2133a59ac920b3e03658c4e (diff)
downloadcoreboot-df47e1c3e590c4aeb2e1dcd32dca194f91327e3f.tar.xz
mb/intel/icelake_rvp: Fill Icelake U and Y RVP devicetree parameters
This implementation configures below parameters: 1. Enable SaGv, isclk. 2. Set Pcie rootport enable, Clock source usage and clkreq. 3. Configure SATA and LPSS controllers parameters. 4. Enable CNVI controller, configure Wifi end device under PCIE RP1. 5. Add TPM device support under GSPI1. Change-Id: I585e82799eea0bad19ad2c94d6b4b3024f930ed4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/intel/icelake_rvp/variants/icl_u/devicetree.cb163
-rw-r--r--src/mainboard/intel/icelake_rvp/variants/icl_y/devicetree.cb179
2 files changed, 278 insertions, 64 deletions
diff --git a/src/mainboard/intel/icelake_rvp/variants/icl_u/devicetree.cb b/src/mainboard/intel/icelake_rvp/variants/icl_u/devicetree.cb
index a971332c20..0d2ea76f9a 100644
--- a/src/mainboard/intel/icelake_rvp/variants/icl_u/devicetree.cb
+++ b/src/mainboard/intel/icelake_rvp/variants/icl_u/devicetree.cb
@@ -4,28 +4,40 @@ chip soc/intel/icelake
device lapic 0 on end
end
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route. i.e. If this route changes then the affected GPE
+ # offset bits also need to be changed.
+ register "gpe0_dw0" = "GPP_B"
+ register "gpe0_dw1" = "GPP_D"
+ register "gpe0_dw2" = "GPP_E"
+
# FSP configuration
- register "SaGv" = "3"
+ register "SaGv" = "SaGv_Enabled"
register "SmbusEnable" = "1"
register "ScsEmmcHs400Enabled" = "1"
+ register "SdCardPowerEnableActiveHigh" = "1"
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # USB3/2 Type A port1
- register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # USB2 WWAN
- register "usb2_ports[2]" = "USB2_PORT_MID(OC0)" # USB2 Bluetooth
+ register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port1
+ register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # USB2 WWAN
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # USB2 Bluetooth
register "usb2_ports[3]" = "USB2_PORT_MID(OC0)" # Type-C Port1
register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-C Port2
- register "usb2_ports[5]" = "USB2_PORT_MID(OC0)" # Type-C Port3
- register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" # Type-C Port4
+ register "usb2_ports[5]" = "USB2_PORT_MID(OC3)" # Type-C Port3
+ register "usb2_ports[6]" = "USB2_PORT_MID(OC3)" # Type-C Port4
register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port2
- register "usb2_ports[8]" = "USB2_PORT_MID(OC0)" # USB2 Type A port2
- register "usb2_ports[9]" = "USB2_PORT_MID(OC0)" # USB2 Type A port2
+ register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # USB2 Type A port1
+ register "usb2_ports[9]" = "USB2_PORT_MID(OC3)" # USB2 Type A port2
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port2
- register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # USB3 WLAN
- register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC0)" # UNUSED
- register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # UNUSED
- register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC0)" # UNUSED
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 WLAN
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED
+ register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED
+ register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED
+
+ # Enable Pch iSCLK
+ register "pch_isclk" = "1"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
@@ -36,6 +48,8 @@ chip soc/intel/icelake
register "PchHdaDspEnable" = "1"
register "PchHdaAudioLinkHda" = "1"
+ register "PrmrrSize" = "0x10000000"
+
register "PcieRpEnable[0]" = "1"
register "PcieRpEnable[1]" = "1"
register "PcieRpEnable[2]" = "1"
@@ -53,12 +67,22 @@ chip soc/intel/icelake
register "PcieRpEnable[14]" = "1"
register "PcieRpEnable[15]" = "1"
- register "PcieClkSrcUsage[0]" = "1"
+ register "PcieClkSrcUsage[0]" = "2"
register "PcieClkSrcUsage[1]" = "8"
- register "PcieClkSrcUsage[2]" = "PCIE_CLK_LAN"
- register "PcieClkSrcUsage[3]" = "13"
+ register "PcieClkSrcUsage[2]" = "0xC"
+ register "PcieClkSrcUsage[3]" = "0x70"
register "PcieClkSrcUsage[4]" = "4"
- register "PcieClkSrcUsage[5]" = "14"
+ register "PcieClkSrcUsage[5]" = "0xE"
+ register "PcieClkSrcUsage[6]" = "0x80"
+ register "PcieClkSrcUsage[7]" = "0x80"
+ register "PcieClkSrcUsage[8]" = "0x80"
+ register "PcieClkSrcUsage[9]" = "0x80"
+ register "PcieClkSrcUsage[10]" = "0x80"
+ register "PcieClkSrcUsage[11]" = "0x80"
+ register "PcieClkSrcUsage[12]" = "0x80"
+ register "PcieClkSrcUsage[13]" = "0x80"
+ register "PcieClkSrcUsage[14]" = "0x80"
+ register "PcieClkSrcUsage[15]" = "0x80"
register "PcieClkSrcClkReq[0]" = "0"
register "PcieClkSrcClkReq[1]" = "1"
@@ -66,6 +90,69 @@ chip soc/intel/icelake
register "PcieClkSrcClkReq[3]" = "3"
register "PcieClkSrcClkReq[4]" = "4"
register "PcieClkSrcClkReq[5]" = "5"
+ register "PcieClkSrcClkReq[6]" = "6"
+ register "PcieClkSrcClkReq[7]" = "7"
+ register "PcieClkSrcClkReq[8]" = "8"
+ register "PcieClkSrcClkReq[9]" = "9"
+ register "PcieClkSrcClkReq[10]" = "10"
+ register "PcieClkSrcClkReq[11]" = "11"
+ register "PcieClkSrcClkReq[12]" = "12"
+ register "PcieClkSrcClkReq[13]" = "13"
+ register "PcieClkSrcClkReq[14]" = "14"
+ register "PcieClkSrcClkReq[15]" = "15"
+
+ register "SataEnable" = "1"
+ register "SataSalpSupport" = "1"
+ register "SataPortsEnable[0]" = "1"
+ register "SataPortsEnable[1]" = "1"
+ register "SataPortsEnable[2]" = "1"
+ register "SataPortsEnable[3]" = "1"
+ register "SataPortsEnable[4]" = "1"
+ register "SataPortsEnable[5]" = "1"
+ register "SataPortsEnable[6]" = "1"
+ register "SataPortsEnable[7]" = "1"
+
+ register "SataPortsDevSlp[0]" = "1"
+ register "SataPortsDevSlp[1]" = "1"
+ register "SataPortsDevSlp[2]" = "1"
+ register "SataPortsDevSlp[3]" = "1"
+ register "SataPortsDevSlp[4]" = "1"
+ register "SataPortsDevSlp[5]" = "1"
+ register "SataPortsDevSlp[6]" = "1"
+ register "SataPortsDevSlp[7]" = "1"
+
+ register "SerialIoI2cMode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoPci,
+ [PchSerialIoIndexI2C1] = PchSerialIoPci,
+ [PchSerialIoIndexI2C2] = PchSerialIoPci,
+ [PchSerialIoIndexI2C3] = PchSerialIoPci,
+ [PchSerialIoIndexI2C4] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C5] = PchSerialIoPci,
+ }"
+
+ register "SerialIoGSpiMode" = "{
+ [PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
+ [PchSerialIoIndexGSPI1] = PchSerialIoPci,
+ [PchSerialIoIndexGSPI2] = PchSerialIoDisabled,
+ }"
+
+ register "SerialIoGSpiCsMode" = "{
+ [PchSerialIoIndexGSPI0] = 1,
+ [PchSerialIoIndexGSPI1] = 1,
+ [PchSerialIoIndexGSPI2] = 1,
+ }"
+
+ register "SerialIoGSpiCsState" = "{
+ [PchSerialIoIndexGSPI0] = 0,
+ [PchSerialIoIndexGSPI1] = 0,
+ [PchSerialIoIndexGSPI2] = 0,
+ }"
+
+ register "SerialIoUartMode" = "{
+ [PchSerialIoIndexUART0] = PchSerialIoDisabled,
+ [PchSerialIoIndexUART1] = PchSerialIoDisabled,
+ [PchSerialIoIndexUART2] = PchSerialIoSkipInit,
+ }"
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
@@ -74,29 +161,32 @@ chip soc/intel/icelake
register "sdcard_cd_gpio" = "GPP_G5"
# Enable S0ix
- register "s0ix_enable" = "1"
+ register "s0ix_enable" = "0"
# Intel Common SoC Config
#+-------------------+---------------------------+
#| Field | Value |
#+-------------------+---------------------------+
#| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT |
- #| I2C3 | Audio |
+ #| GSPI1 | cr50 TPM. Early init is |
+ #| | required to set up a BAR |
+ #| | for TPM communication |
+ #| | before memory is up |
#+-------------------+---------------------------+
+
register "common_soc_config" = "{
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
- .i2c[3] = {
- .speed = I2C_SPEED_STANDARD,
- .rise_time_ns = 104,
- .fall_time_ns = 52,
+ .gspi[1] = {
+ .speed_mhz = 1,
+ .early_init = 1,
},
}"
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
- device pci 04.0 on end # SA Thermal device
- device pci 12.0 on end # Thermal Subsystem
+ device pci 04.0 off end # SA Thermal device
+ device pci 12.0 off end # Thermal Subsystem
device pci 12.5 off end # UFS SCS
device pci 12.6 off end # GSPI #2
device pci 14.0 on
@@ -188,6 +278,7 @@ chip soc/intel/icelake
end
end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
+ device pci 14.2 off end # PMC SRAM
chip drivers/intel/wifi
register "wake" = "GPE0_PME_B0"
device pci 14.3 on end # CNVi wifi
@@ -203,7 +294,7 @@ chip soc/intel/icelake
end
end # I2C 0
device pci 15.1 on end # I2C #1
- device pci 15.2 off end # I2C #2
+ device pci 15.2 on end # I2C #2
device pci 15.3 on end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
@@ -211,12 +302,17 @@ chip soc/intel/icelake
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 16.5 off end # Management Engine Interface 4
- device pci 17.0 off end # SATA
+ device pci 17.0 on end # SATA
device pci 19.0 on end # I2C #4
device pci 19.1 off end # I2C #5
device pci 19.2 on end # UART #2
device pci 1a.0 on end # eMMC
- device pci 1c.0 on end # PCI Express Port 1 x4 SLOT1
+ device pci 1c.0 on
+ chip drivers/intel/wifi
+ register "wake" = "GPE0_PCI_EXP"
+ device pci 00.0 on end
+ end
+ end # PCI Express Port 1 x4 SLOT1
device pci 1c.4 on end # PCI Express Port 5 x1 SLOT2/LAN
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
@@ -232,12 +328,15 @@ chip soc/intel/icelake
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
- device pci 1e.3 off end # GSPI #1
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
+ device pci 1e.3 on
+ chip drivers/spi/acpi
+ register "hid" = "ACPI_DT_NAMESPACE_HID"
+ register "compat_string" = ""google,cr50""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
+ device spi 0 on end
end
- end # LPC Interface
+ end # GSPI #1
+ device pci 1f.0 on end # eSPI Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on end # Intel HDA
diff --git a/src/mainboard/intel/icelake_rvp/variants/icl_y/devicetree.cb b/src/mainboard/intel/icelake_rvp/variants/icl_y/devicetree.cb
index 787097ea9e..62c7a828be 100644
--- a/src/mainboard/intel/icelake_rvp/variants/icl_y/devicetree.cb
+++ b/src/mainboard/intel/icelake_rvp/variants/icl_y/devicetree.cb
@@ -4,28 +4,40 @@ chip soc/intel/icelake
device lapic 0 on end
end
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route. i.e. If this route changes then the affected GPE
+ # offset bits also need to be changed.
+ register "gpe0_dw0" = "GPP_B"
+ register "gpe0_dw1" = "GPP_D"
+ register "gpe0_dw2" = "GPP_E"
+
# FSP configuration
- register "SaGv" = "3"
+ register "SaGv" = "SaGv_Disabled"
register "SmbusEnable" = "1"
register "ScsEmmcHs400Enabled" = "1"
+ register "SdCardPowerEnableActiveHigh" = "1"
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # USB3/2 Type A port1
- register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC0)" # USB3/2 Type A port2
- register "usb2_ports[2]" = "USB2_PORT_MID(OC0)" # Bluetooth
+ register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port1
+ register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # USB3/2 Type A port2
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
register "usb2_ports[3]" = "USB2_PORT_MID(OC0)" # Type-C Port1
register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-C Port2
- register "usb2_ports[5]" = "USB2_PORT_MID(OC0)" # Type-C Port3
- register "usb2_ports[6]" = "USB2_PORT_EMPTY" # UNUSED
- register "usb2_ports[7]" = "USB2_PORT_EMPTY" # UNUSED
- register "usb2_ports[8]" = "USB2_PORT_EMPTY" # USB2 Type A port1
- register "usb2_ports[9]" = "USB2_PORT_MID(OC0)" # USB2 Type A port2
+ register "usb2_ports[5]" = "USB2_PORT_MID(OC3)" # Type-C Port3
+ register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # UNUSED
+ register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # UNUSED
+ register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # USB2 Type A port1
+ register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # USB2 Type A port2
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port2
- register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # USB3 WLAN
- register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC0)" # UNUSED
- register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # UNUSED
- register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC0)" # UNUSED
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 WLAN
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED
+ register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED
+ register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED
+
+ # Enable Pch iSCLK
+ register "pch_isclk" = "1"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
@@ -35,8 +47,8 @@ chip soc/intel/icelake
register "PchHdaDspEnable" = "1"
register "PchHdaAudioLinkHda" = "1"
- register "PchHdaAudioLinkSsp0" = "1"
- register "PchHdaAudioLinkSsp1" = "1"
+
+ register "PrmrrSize" = "0x10000000"
register "PcieRpEnable[0]" = "1"
register "PcieRpEnable[1]" = "1"
@@ -52,13 +64,25 @@ chip soc/intel/icelake
register "PcieRpEnable[11]" = "1"
register "PcieRpEnable[12]" = "1"
register "PcieRpEnable[13]" = "1"
+ register "PcieRpEnable[14]" = "1"
+ register "PcieRpEnable[15]" = "1"
- register "PcieClkSrcUsage[0]" = "PCIE_CLK_NOTUSED"
+ register "PcieClkSrcUsage[0]" = "0x80"
register "PcieClkSrcUsage[1]" = "8"
- register "PcieClkSrcUsage[2]" = "PCIE_CLK_LAN"
- register "PcieClkSrcUsage[3]" = "14"
- register "PcieClkSrcUsage[4]" = "PCIE_CLK_NOTUSED"
- register "PcieClkSrcUsage[5]" = "1"
+ register "PcieClkSrcUsage[2]" = "0xC"
+ register "PcieClkSrcUsage[3]" = "0x70"
+ register "PcieClkSrcUsage[4]" = "4"
+ register "PcieClkSrcUsage[5]" = "2"
+ register "PcieClkSrcUsage[6]" = "0x80"
+ register "PcieClkSrcUsage[7]" = "0x80"
+ register "PcieClkSrcUsage[8]" = "0x80"
+ register "PcieClkSrcUsage[9]" = "0x80"
+ register "PcieClkSrcUsage[10]" = "0x80"
+ register "PcieClkSrcUsage[11]" = "0x80"
+ register "PcieClkSrcUsage[12]" = "0x80"
+ register "PcieClkSrcUsage[13]" = "0x80"
+ register "PcieClkSrcUsage[14]" = "0x80"
+ register "PcieClkSrcUsage[15]" = "0x80"
register "PcieClkSrcClkReq[0]" = "0"
register "PcieClkSrcClkReq[1]" = "1"
@@ -66,6 +90,69 @@ chip soc/intel/icelake
register "PcieClkSrcClkReq[3]" = "3"
register "PcieClkSrcClkReq[4]" = "4"
register "PcieClkSrcClkReq[5]" = "5"
+ register "PcieClkSrcClkReq[6]" = "6"
+ register "PcieClkSrcClkReq[7]" = "7"
+ register "PcieClkSrcClkReq[8]" = "8"
+ register "PcieClkSrcClkReq[9]" = "9"
+ register "PcieClkSrcClkReq[10]" = "10"
+ register "PcieClkSrcClkReq[11]" = "11"
+ register "PcieClkSrcClkReq[12]" = "12"
+ register "PcieClkSrcClkReq[13]" = "13"
+ register "PcieClkSrcClkReq[14]" = "14"
+ register "PcieClkSrcClkReq[15]" = "15"
+
+ register "SataEnable" = "1"
+ register "SataSalpSupport" = "1"
+ register "SataPortsEnable[0]" = "1"
+ register "SataPortsEnable[1]" = "1"
+ register "SataPortsEnable[2]" = "1"
+ register "SataPortsEnable[3]" = "1"
+ register "SataPortsEnable[4]" = "1"
+ register "SataPortsEnable[5]" = "1"
+ register "SataPortsEnable[6]" = "1"
+ register "SataPortsEnable[7]" = "1"
+
+ register "SataPortsDevSlp[0]" = "1"
+ register "SataPortsDevSlp[1]" = "1"
+ register "SataPortsDevSlp[2]" = "1"
+ register "SataPortsDevSlp[3]" = "1"
+ register "SataPortsDevSlp[4]" = "1"
+ register "SataPortsDevSlp[5]" = "1"
+ register "SataPortsDevSlp[6]" = "1"
+ register "SataPortsDevSlp[7]" = "1"
+
+ register "SerialIoI2cMode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoPci,
+ [PchSerialIoIndexI2C1] = PchSerialIoPci,
+ [PchSerialIoIndexI2C2] = PchSerialIoPci,
+ [PchSerialIoIndexI2C3] = PchSerialIoPci,
+ [PchSerialIoIndexI2C4] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C5] = PchSerialIoPci,
+ }"
+
+ register "SerialIoGSpiMode" = "{
+ [PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
+ [PchSerialIoIndexGSPI1] = PchSerialIoPci,
+ [PchSerialIoIndexGSPI2] = PchSerialIoDisabled,
+ }"
+
+ register "SerialIoGSpiCsMode" = "{
+ [PchSerialIoIndexGSPI0] = 1,
+ [PchSerialIoIndexGSPI1] = 1,
+ [PchSerialIoIndexGSPI2] = 1,
+ }"
+
+ register "SerialIoGSpiCsState" = "{
+ [PchSerialIoIndexGSPI0] = 0,
+ [PchSerialIoIndexGSPI1] = 0,
+ [PchSerialIoIndexGSPI2] = 0,
+ }"
+
+ register "SerialIoUartMode" = "{
+ [PchSerialIoIndexUART0] = PchSerialIoDisabled,
+ [PchSerialIoIndexUART1] = PchSerialIoDisabled,
+ [PchSerialIoIndexUART2] = PchSerialIoSkipInit,
+ }"
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
@@ -74,13 +161,32 @@ chip soc/intel/icelake
register "sdcard_cd_gpio" = "GPP_G5"
# Enable S0ix
- register "s0ix_enable" = "1"
+ register "s0ix_enable" = "0"
+
+ # Intel Common SoC Config
+ #+-------------------+---------------------------+
+ #| Field | Value |
+ #+-------------------+---------------------------+
+ #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT |
+ #| GSPI1 | cr50 TPM. Early init is |
+ #| | required to set up a BAR |
+ #| | for TPM communication |
+ #| | before memory is up |
+ #+-------------------+---------------------------+
+
+ register "common_soc_config" = "{
+ .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
+ .gspi[1] = {
+ .speed_mhz = 1,
+ .early_init = 1,
+ },
+ }"
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Integrated Graphics Device
- device pci 04.0 on end # SA Thermal device
- device pci 12.0 on end # Thermal Subsystem
+ device pci 04.0 off end # SA Thermal device
+ device pci 12.0 off end # Thermal Subsystem
device pci 12.5 off end # UFS SCS
device pci 12.6 off end # GSPI #2
device pci 14.0 on
@@ -172,6 +278,7 @@ chip soc/intel/icelake
end
end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
+ device pci 14.2 off end # PMC SRAM
chip drivers/intel/wifi
register "wake" = "GPE0_PME_B0"
device pci 14.3 on end # CNVi wifi
@@ -187,20 +294,25 @@ chip soc/intel/icelake
end
end # I2C 0
device pci 15.1 on end # I2C #1
- device pci 15.2 off end # I2C #2
- device pci 15.3 on end # I2C #3
+ device pci 15.2 on end # I2C #2
+ device pci 15.3 on end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 16.5 off end # Management Engine Interface 4
- device pci 17.0 off end # SATA
+ device pci 17.0 on end # SATA
device pci 19.0 on end # I2C #4
device pci 19.1 off end # I2C #5
device pci 19.2 on end # UART #2
device pci 1a.0 on end # eMMC
- device pci 1c.0 on end # PCI Express Port 1 x4 SLOT1
+ device pci 1c.0 on
+ chip drivers/intel/wifi
+ register "wake" = "GPE0_PCI_EXP"
+ device pci 00.0 on end
+ end
+ end # PCI Express Port 1 x4 SLOT1
device pci 1c.4 on end # PCI Express Port 5 x1 SLOT2/LAN
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
@@ -216,12 +328,15 @@ chip soc/intel/icelake
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
- device pci 1e.3 off end # GSPI #1
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
+ device pci 1e.3 on
+ chip drivers/spi/acpi
+ register "hid" = "ACPI_DT_NAMESPACE_HID"
+ register "compat_string" = ""google,cr50""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
+ device spi 0 on end
end
- end # LPC Interface
+ end # GSPI #1
+ device pci 1f.0 on end # eSPI Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
device pci 1f.3 on end # Intel HDA