mb/ocp/monolake: Configure IPMI BMC FRB2 watchdog timer via VPD variables

Add VPD variables for enabling/disabling FRB2 watchdog timer and
setting the timer countdown value. By default it would start the
timer and trigger hard reset when it's expired. The timer is
expected to be stopped later by payload or OS.

Right now the timer is started after FSP-M. Ideally it should be
before FSP-M (to detect memory training error).

Tested on OCP Mono Lake.

Change-Id: I82b244d08380a0461c92662e025d8b95b3133e23
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

4 files changed, 42 insertions, 3 deletions

diff --git a/src/mainboard/ocp/monolake/Kconfig b/src/mainboard/ocp/monolake/Kconfig
index ad4e9c7208..7d85bbba70 100644
--- a/src/mainboard/ocp/monolake/Kconfig
+++ b/src/mainboard/ocp/monolake/Kconfig
@@ -13,6 +13,7 @@ config BOARD_SPECIFIC_OPTIONS
 	select MAINBOARD_HAS_LPC_TPM
 	select MAINBOARD_HAS_TPM1
 	select IPMI_KCS
+	select VPD
 
 config VBOOT
 	select VBOOT_VBNV_CMOS
diff --git a/src/mainboard/ocp/monolake/ipmi.c b/src/mainboard/ocp/monolake/ipmi.c
index 37aacc842e..3f178dc2cc 100644
--- a/src/mainboard/ocp/monolake/ipmi.c
+++ b/src/mainboard/ocp/monolake/ipmi.c
@@ -17,8 +17,6 @@
 #include <console/console.h>
 #include "ipmi.h"
 
-#define BMC_KCS_BASE 0xca2
-
 int is_ipmi_clear_cmos_set(ipmi_oem_rsp_t *rsp)
 {
 	int ret;
diff --git a/src/mainboard/ocp/monolake/ipmi.h b/src/mainboard/ocp/monolake/ipmi.h
index 5863eb5082..04649111c2 100644
--- a/src/mainboard/ocp/monolake/ipmi.h
+++ b/src/mainboard/ocp/monolake/ipmi.h
@@ -23,7 +23,7 @@
 #define GET_CMOS_BIT(x) ((x) & (1 << 1))
 #define GET_VALID_BIT(x) ((x) & (1 << 7))
 #define CLEAR_CMOS_AND_VALID_BIT(x) ((x) &= 0x7d)
-
+#define BMC_KCS_BASE 0xca2
 typedef struct {
 	u8 BootMode; /* Bit 1:CMOS clear, bit 7:valid bit. */
 	u8 Boot0000;
diff --git a/src/mainboard/ocp/monolake/mainboard.c b/src/mainboard/ocp/monolake/mainboard.c
index 010e064c35..dffd19f0f0 100644
--- a/src/mainboard/ocp/monolake/mainboard.c
+++ b/src/mainboard/ocp/monolake/mainboard.c
@@ -19,7 +19,46 @@
 #include <cf9_reset.h>
 #include <smbios.h>
 #include <string.h>
+#include <drivers/vpd/vpd.h>
+#include <console/console.h>
+#include <drivers/ipmi/ipmi_ops.h>
 #include "ipmi.h"
+/* VPD variable for enabling/disabling FRB2 timer. */
+#define FRB2_TIMER "FRB2_TIMER"
+/* VPD variable for setting FRB2 timer countdown value. */
+#define FRB2_COUNTDOWN "FRB2_COUNTDOWN"
+#define VPD_LEN 10
+/* Default countdown is 15 minutes. */
+#define DEFAULT_COUNTDOWN 9000
+
+static void init_frb2_wdt(void)
+{
+
+	char val[VPD_LEN];
+	/* Enable FRB2 timer by default. */
+	u8 enable = 1;
+	uint16_t countdown;
+
+	if (vpd_get_bool(FRB2_TIMER, VPD_RW, &enable)) {
+		if (!enable) {
+			printk(BIOS_DEBUG, "Disable FRB2 timer\n");
+			ipmi_stop_bmc_wdt(BMC_KCS_BASE);
+		}
+	}
+	if (enable) {
+		if (vpd_gets(FRB2_COUNTDOWN, val, VPD_LEN, VPD_RW)) {
+			countdown = (uint16_t)atol(val);
+			printk(BIOS_DEBUG, "FRB2 timer countdown set to: %d\n",
+				countdown);
+		} else {
+			printk(BIOS_DEBUG, "FRB2 timer use default value: %d\n",
+				DEFAULT_COUNTDOWN);
+			countdown = DEFAULT_COUNTDOWN;
+		}
+		ipmi_init_and_start_bmc_wdt(BMC_KCS_BASE, countdown,
+			TIMEOUT_HARD_RESET);
+	}
+}
 
 /*
  * mainboard_enable is executed as first thing after enumerate_buses().
@@ -29,6 +68,7 @@ static void mainboard_enable(struct device *dev)
 {
 	ipmi_oem_rsp_t rsp;
 
+	init_frb2_wdt();
 	if (is_ipmi_clear_cmos_set(&rsp)) {
 		/* TODO: Should also try to restore CMOS to cmos.default
 		 * if USE_OPTION_TABLE is set */