Add initial support for the NEC PowerMate 2000 board.

See details at:
http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/

Thanks to Quentin RAMEAU <quentin.rameau@gmail.com> for providing the
required information and for testing the patch.

This boots into a Linux console just fine.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Corey Osgood <corey.osgood@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3800 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

6 files changed, 392 insertions, 0 deletions

diff --git a/src/mainboard/nec/powermate2000/Config.lb b/src/mainboard/nec/powermate2000/Config.lb
new file mode 100644
index 0000000000..779e1c0563
--- /dev/null
+++ b/src/mainboard/nec/powermate2000/Config.lb
@@ -0,0 +1,135 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE   = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE)
+else
+	default ROM_SECTION_SIZE   = (ROM_SIZE - FALLBACK_SIZE)
+	default ROM_SECTION_OFFSET = 0
+end
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
+default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE)
+default XIP_ROM_SIZE = 64 * 1024
+default XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+arch i386 end
+driver mainboard.o
+if HAVE_PIRQ_TABLE object irq_tables.o end
+# object reset.o
+makerule ./failover.E
+	depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
+	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+end
+makerule ./failover.inc
+	depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
+	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+end
+makerule ./auto.E
+	# depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
+	depends	"$(MAINBOARD)/auto.c ../romcc"
+	action	"../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc
+	# depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
+	depends "$(MAINBOARD)/auto.c ../romcc"
+	action	"../romcc    -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+if USE_FALLBACK_IMAGE
+	mainboardinit cpu/x86/16bit/reset16.inc
+	ldscript /cpu/x86/16bit/reset16.lds
+else
+	mainboardinit cpu/x86/32bit/reset32.inc
+	ldscript /cpu/x86/32bit/reset32.lds
+end
+mainboardinit arch/i386/lib/cpu_reset.inc
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+if USE_FALLBACK_IMAGE
+	ldscript /arch/i386/lib/failover.lds
+	mainboardinit ./failover.inc
+end
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
+dir /pc80
+config chip.h
+
+chip northbridge/intel/i82810			# Northbridge
+  device apic_cluster 0 on			# APIC cluster
+    chip cpu/intel/socket_PGA370		# CPU
+      device apic 0 on end			# APIC
+    end
+  end
+  device pci_domain 0 on
+    device pci 0.0 on end			# Host bridge
+    device pci 1.0 off				# Onboard video
+      # chip drivers/pci/onboard
+      #   device pci 1.0 on end
+      #   register "rom_address" = "0xfff80000"
+      # end
+    end
+    chip southbridge/intel/i82801xx		# Southbridge
+      device pci 1e.0 on end			# PCI bridge
+      device pci 1f.0 on			# ISA/LPC bridge
+        chip superio/smsc/smscsuperio		# Super I/O (SMSC LPC47B27x)
+          device pnp 2e.0 on			# Floppy
+            io 0x60 = 0x3f0
+            irq 0x70 = 6
+            drq 0x74 = 2
+          end
+          device pnp 2e.3 on			# Parallel port
+            io 0x60 = 0x378
+            irq 0x70 = 7
+            drq 0x74 = 3
+          end
+          device pnp 2e.4 on			# Com1
+            io 0x60 = 0x3f8
+            irq 0x70 = 4
+          end
+          device pnp 2e.5 off end		# Com2 (N/A)
+          device pnp 2e.7 on			# PS/2 keyboard
+            irq 0x70 = 1
+            irq 0x72 = 0
+          end
+          device pnp 2e.9 off end		# Game port (N/A)
+          device pnp 2e.a on			# Power-management events (PME)
+            io 0x60 = 0x800
+          end
+          device pnp 2e.b on			# MIDI port
+            io 0x60 = 0x330
+            irq 0x70 = 5
+          end
+        end
+      end
+      device pci 1f.1 on end			# IDE
+      device pci 1f.2 on end			# USB
+      device pci 1f.3 on end			# SMBus
+      device pci 1f.5 on end			# AC'97 audio
+      device pci 1f.6 off end			# AC'97 modem (N/A)
+    end
+  end
+end
+
diff --git a/src/mainboard/nec/powermate2000/Options.lb b/src/mainboard/nec/powermate2000/Options.lb
new file mode 100644
index 0000000000..e89688616f
--- /dev/null
+++ b/src/mainboard/nec/powermate2000/Options.lb
@@ -0,0 +1,98 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses HAVE_OPTION_TABLE
+uses USE_OPTION_TABLE
+uses CONFIG_ROM_PAYLOAD
+uses IRQ_SLOT_COUNT
+uses MAINBOARD
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PART_NUMBER
+uses COREBOOT_EXTRA_VERSION
+uses ARCH
+uses FALLBACK_SIZE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD_START
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_PRECOMPRESSED_PAYLOAD
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses _RAMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses HAVE_MP_TABLE
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_SERIAL8250
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses CONFIG_UDELAY_TSC
+uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+
+default ROM_SIZE = 512 * 1024
+default HAVE_FALLBACK_BOOT = 1
+default HAVE_MP_TABLE = 0
+default HAVE_HARD_RESET = 0
+default HAVE_PIRQ_TABLE = 1
+default IRQ_SLOT_COUNT = 0		# Override this in targets/*/Config.lb.
+default MAINBOARD_VENDOR = "N/A"	# Override this in targets/*/Config.lb.
+default MAINBOARD_PART_NUMBER = "N/A"	# Override this in targets/*/Config.lb.
+default ROM_IMAGE_SIZE = 64 * 1024
+default FALLBACK_SIZE = 128 * 1024
+default STACK_SIZE = 8 * 1024
+default HEAP_SIZE = 16 * 1024
+default HAVE_OPTION_TABLE = 0
+#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default USE_OPTION_TABLE = 0
+default _RAMBASE = 0x00004000
+default CONFIG_ROM_PAYLOAD = 1
+default CROSS_COMPILE = ""
+default CC = "$(CROSS_COMPILE)gcc -m32"
+default HOSTCC = "gcc"
+default CONFIG_CONSOLE_SERIAL8250 = 1
+default TTYS0_BAUD = 115200
+default TTYS0_BASE = 0x3f8
+default TTYS0_LCS = 0x3			# 8n1
+default DEFAULT_CONSOLE_LOGLEVEL = 9
+default MAXIMUM_CONSOLE_LOGLEVEL = 9
+default CONFIG_UDELAY_TSC = 1
+default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
+default CONFIG_CONSOLE_VGA = 1
+default CONFIG_PCI_ROM_RUN = 1
+
+end
diff --git a/src/mainboard/nec/powermate2000/auto.c b/src/mainboard/nec/powermate2000/auto.c
new file mode 100644
index 0000000000..7ce77442ff
--- /dev/null
+++ b/src/mainboard/nec/powermate2000/auto.c
@@ -0,0 +1,61 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/hlt.h>
+#include <stdlib.h>
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "superio/smsc/smscsuperio/smscsuperio_early_serial.c"
+#include "northbridge/intel/i82810/raminit.h"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include "cpu/x86/bist.h"
+#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c"
+#include "pc80/udelay_io.c"
+#include "northbridge/intel/i82810/raminit.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1)
+
+static void main(unsigned long bist)
+{
+	if (bist == 0)
+		early_mtrr_init();
+
+	smscsuperio_enable_serial(SERIAL_DEV, TTYS0_BASE);
+	uart_init();
+	console_init();
+
+	enable_smbus();
+
+	report_bist_failure(bist);
+
+	/* dump_spd_registers(); */
+	sdram_set_registers();
+	sdram_set_spd_registers();
+	sdram_enable();
+	/* ram_check(0, 640 * 1024); */
+}
diff --git a/src/mainboard/nec/powermate2000/chip.h b/src/mainboard/nec/powermate2000/chip.h
new file mode 100644
index 0000000000..aecb7ae34e
--- /dev/null
+++ b/src/mainboard/nec/powermate2000/chip.h
@@ -0,0 +1,24 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_nec_powermate2000_ops;
+
+struct mainboard_nec_powermate2000_config {
+};
diff --git a/src/mainboard/nec/powermate2000/irq_tables.c b/src/mainboard/nec/powermate2000/irq_tables.c
new file mode 100644
index 0000000000..bc3113f5f9
--- /dev/null
+++ b/src/mainboard/nec/powermate2000/irq_tables.c
@@ -0,0 +1,48 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+	PIRQ_SIGNATURE,
+	PIRQ_VERSION,
+	32 + 16 * IRQ_SLOT_COUNT,/* Max. number of devices on the bus */
+	0x00,			/* Interrupt router bus */
+	(0x1f << 3) | 0x0,	/* Interrupt router device */
+	0,			/* IRQs devoted exclusively to PCI usage */
+	0x8086,			/* Vendor */
+	0x122e,			/* Device */
+	0,			/* Crap (miniport) */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+	0x6e,			/* Checksum */
+	{
+		/* bus,     dev|fn,   {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap},  slot, rfu */
+		{0x00, (0x1e << 3) | 0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}}, 0x0, 0x0},
+		{0x01, (0x03 << 3) | 0x0, {{0x61, 0xdef8}, {0x62, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0},
+		{0x01, (0x04 << 3) | 0x0, {{0x62, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0},
+		{0x00, (0x1f << 3) | 0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}}, 0x0, 0x0},
+		{0x00, (0x01 << 3) | 0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0},
+	}
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	return copy_pirq_routing_table(addr);
+}
diff --git a/src/mainboard/nec/powermate2000/mainboard.c b/src/mainboard/nec/powermate2000/mainboard.c
new file mode 100644
index 0000000000..7578bfaaa1
--- /dev/null
+++ b/src/mainboard/nec/powermate2000/mainboard.c
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <device/device.h>
+#include "chip.h"
+
+struct chip_operations mainboard_nec_powermate2000_ops = {
+	CHIP_NAME("NEC PowerMate 2000 Mainboard")
+};