Supermicro H8SCM: Use SPD read code from F15 wrapper

Changes:
 - Get rid of the h8scm mainboard specific code and use the
   platform generic function wrapper that was added in change
   http://review.coreboot.org/#/c/2777/
   AMD Fam15: Add SPD read functions to wrapper code

 - Move DIMM addresses into devicetree.cb

Notes:
 - The DIMM reads only happen in romstage, so the function is not
   available in ramstage.  Point the read-SPD callback to a generic
   function in ramstage.

Change-Id: I575221039ad65a59ae0f93397ef1038b669e81c7
Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com>
Reviewed-on: http://review.coreboot.org/2829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

4 files changed, 12 insertions, 234 deletions

diff --git a/src/mainboard/supermicro/h8scm/BiosCallOuts.c b/src/mainboard/supermicro/h8scm/BiosCallOuts.c
index 1499d54792..97f59b3442 100644
--- a/src/mainboard/supermicro/h8scm/BiosCallOuts.c
+++ b/src/mainboard/supermicro/h8scm/BiosCallOuts.c
@@ -23,6 +23,7 @@
 #include "Ids.h"
 #include "OptionsIds.h"
 #include "heapManager.h"
+#include <northbridge/amd/agesa/family15/dimmSpd.h>
 
 STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] =
 {
@@ -81,8 +82,6 @@ STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] =
 	},
 };
 
-extern AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info);
-
 AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
 {
 	UINTN i;
@@ -487,7 +486,11 @@ AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
 AGESA_STATUS BiosReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
 {
 	AGESA_STATUS Status;
-	Status = AmdMemoryReadSPD (Func, Data, ConfigPtr);
+#ifdef __PRE_RAM__
+	Status = agesa_ReadSPD (Func, Data, ConfigPtr);
+#else
+	Status = AGESA_UNSUPPORTED;
+#endif
 
 	return Status;
 }
diff --git a/src/mainboard/supermicro/h8scm/Makefile.inc b/src/mainboard/supermicro/h8scm/Makefile.inc
index 2aae4c0846..cd56c474c5 100644
--- a/src/mainboard/supermicro/h8scm/Makefile.inc
+++ b/src/mainboard/supermicro/h8scm/Makefile.inc
@@ -22,7 +22,6 @@ romstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += sb700_cfg.c
 romstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += reset.c
 romstage-y += buildOpts.c
 romstage-y += agesawrapper.c
-romstage-y += dimmSpd.c
 romstage-y += BiosCallOuts.c
 romstage-y += platform_oem.c
 
@@ -31,7 +30,6 @@ ramstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += sb700_cfg.c
 ramstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += reset.c
 ramstage-y += buildOpts.c
 ramstage-y += agesawrapper.c
-ramstage-y += dimmSpd.c
 ramstage-y += BiosCallOuts.c
 ramstage-y += platform_oem.c
 
diff --git a/src/mainboard/supermicro/h8scm/devicetree.cb b/src/mainboard/supermicro/h8scm/devicetree.cb
index afec48d798..a4e6c97b2f 100644
--- a/src/mainboard/supermicro/h8scm/devicetree.cb
+++ b/src/mainboard/supermicro/h8scm/devicetree.cb
@@ -121,6 +121,12 @@ chip northbridge/amd/agesa/family15/root_complex
 			device pci 18.3 on end
 			device pci 18.4 on end
 			device pci 18.5 on end #f15
+
+			register "spdAddrLookup" = "
+			{
+				{ {0xA4, 0xA6}, {0xA0, 0xA2}, {0x00, 0x00}, {0x00, 0x00}, }, // socket 0
+				{ {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 (unused)
+			}"
 		end #chip northbridge/amd/agesa/family15 # CPU side of HT root complex
 	end #domain
 end #northbridge/amd/agesa/family15/root_complex
diff --git a/src/mainboard/supermicro/h8scm/dimmSpd.c b/src/mainboard/supermicro/h8scm/dimmSpd.c
deleted file mode 100644
index 29ed2719d2..0000000000
--- a/src/mainboard/supermicro/h8scm/dimmSpd.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "Porting.h"
-#include "AGESA.h"
-#include "amdlib.h"
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <device/pci_ids.h>
-
-AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info);
-#define DIMENSION(array)(sizeof (array)/ sizeof (array [0]))
-
-/* SP5100 GPIO 49-52 contoled by SMBUS PCI_Reg 0x52 */
-#define SP5100_GPIO37_46_47_48	0xA6
-#define SP5100_GPIO49_52	0x50
-
-/**
- * TODO not support all GPIO yet
- * @param reg -GPIO Cntrl Register
- * @param out -GPIO bitmap
- * @param out -GPIO enable bitmap
- * @return  old setting
- */
-static u8 sp5100_set_gpio(u8 reg, u8 out, u8 enable)
-{
-	u8 value, ret;
-	device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBUS
-
-	value = pci_read_config8(sm_dev, reg);
-	ret = value;
-	value &= ~(enable);
-	value |= out;
-	value &= ~(enable << 4);
-	pci_write_config8(sm_dev, reg, value);
-
-	return ret;
-}
-
-static void sp5100_restore_gpio(u8 reg, u8 value)
-{
-	device_t sm_dev = PCI_DEV(0, 0x14, 0);
-	pci_write_config8(sm_dev, reg, value);
-}
-
-/*-----------------------------------------------------------------------------
- *
- * SPD address table - porting required
- */
-static const UINT8 spdAddressLookup [1] [2] [2] = { // socket, channel, dimm
-	/* socket 0 */
-	{
-		{0xA4, 0xA6},
-		{0xA0, 0xA2},
-	},
-	/* socket 1 */
-	/* { */
-	/* 	{0xA0, 0xA4, 0xA8}, */
-	/* 	{0xA2, 0xA6, 0xAA}, */
-	/* }, */
-};
-
-/*-----------------------------------------------------------------------------
- *
- * readSmbusByteData - read a single SPD byte from any offset
- */
-
-static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
-{
-	unsigned int status;
-	UINT64 limit;
-
-	address |= 1; // set read bit
-
-	outb(0xFF, iobase + 0);                // clear error status
-	outb(0x1F, iobase + 1);                // clear error status
-	outb(offset, iobase + 3);              // offset in eeprom
-	outb(address, iobase + 4);             // slave address and read bit
-	outb(0x48, iobase + 2);                // read byte command
-
-	// time limit to avoid hanging for unexpected error status (should never happen)
-	limit = __rdtsc () + 2000000000 / 10;
-	for (;;)
-	{
-		status = inb(iobase);
-		if (__rdtsc () > limit) break;
-		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
-		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
-		break;
-	}
-
-	buffer [0] = inb(iobase + 5);
-	if (status == 2) status = 0;                      // check for done with no errors
-	return status;
-}
-
-/*-----------------------------------------------------------------------------
- *
- * readSmbusByte - read a single SPD byte from the default offset
- *                 this function is faster function readSmbusByteData
- */
-
-static int readSmbusByte (int iobase, int address, char *buffer)
-{
-	unsigned int status;
-	UINT64 limit;
-
-	outb(0xFF, iobase + 0);                // clear error status
-	outb(0x44, iobase + 2);                // read command
-
-	// time limit to avoid hanging for unexpected error status
-	limit = __rdtsc () + 2000000000 / 10;
-	for (;;)
-	{
-		status = inb(iobase);
-		if (__rdtsc () > limit) break;
-		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
-		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
-		break;
-	}
-
-	buffer [0] = inb(iobase + 5);
-	if (status == 2) status = 0;                      // check for done with no errors
-	return status;
-}
-
-/*---------------------------------------------------------------------------
- *
- * readspd - Read one or more SPD bytes from a DIMM.
- *           Start with offset zero and read sequentially.
- *           Optimization relies on autoincrement to avoid
- *           sending offset for every byte.
- *          Reads 128 bytes in 7-8 ms at 400 KHz.
- */
-
-static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
-{
-	int index, error;
-
-	/* read the first byte using offset zero */
-	error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
-	if (error) {
-		return error;
-	}
-
-	/* read the remaining bytes using auto-increment for speed */
-	for (index = 1; index < count; index++)
-	{
-		error = readSmbusByte (iobase, SmbusSlaveAddress, buffer + index);
-		if (error)
-			return error;
-	}
-
-	return 0;
-}
-
-static void setupFch (int ioBase)
-{
-	outb(66000000 / 400000 / 4, ioBase + 0x0E); /* set SMBus clock to 400 KHz */
-}
-
-AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info)
-{
-	AGESA_STATUS status;
-	int spdAddress, ioBase, i;
-	u8 i2c_channel;
-	u8 backup;
-	device_t sm_dev;
-
-	if (info->SocketId     >= DIMENSION (spdAddressLookup      )) return AGESA_ERROR;
-	if (info->MemChannelId >= DIMENSION (spdAddressLookup[0]   )) return AGESA_ERROR;
-	if (info->DimmId       >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR;
-	i2c_channel = (UINT8) info->SocketId;
-
-	printk(BIOS_DEBUG, "S=%x, c=%x, d=%x\n", info->SocketId, info->MemChannelId, info->DimmId);
-	/* set IDTQS3253 i2c channel
-	 * GPIO49,48 control the S1,S0
-	 *  S1 S0 true table
-	 *   0  0   channel 0
-	 *   0  1   channel 1
-	 *   1  0   channel 2   -  Socket 0
-	 *   1  1   channel 3   -  Socket 1
-	 * Note: Above is abstracted from Schemetic. But actually it seems to be other way.
-	 *   1  0   channel 2   -  Socket 1
-	 *   1  1   channel 3   -  Socket 0
-	 * Note: The DIMMs need to be plugged in from the farthest slot for each channel.
-	 */
-	//backup = sp5100_set_gpio(SP5100_GPIO49_52, 0x1, 0x1);
-	//sp5100_set_gpio(SP5100_GPIO37_46_47_48, (~i2c_channel & 1) << 3, 0x1 << 3);
-
-	spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId];
-	if (spdAddress == 0)
-		return AGESA_ERROR;
-
-	/*
-	 * SMBus Base Address was set during southbridge early setup.
-	 * e.g. sb700 IO mapped SMBUS_IO_BASE 0x6000, CIMX using 0xB00 as default
-	 */
-	sm_dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB700_SM), 0);
-	ioBase = pci_read_config32(sm_dev, 0x90) & (0xFFFFFFF0);
-	setupFch(ioBase);
-
-	status = readspd(ioBase, spdAddress, (void *)info->Buffer, 256);
-	for (i=0; i<256; i++) {
-		printk(BIOS_DEBUG, "%02X ", info->Buffer[i]);
-		if ((i%16)==15)
-			printk(BIOS_DEBUG, "\n");
-	}
-	printk(BIOS_DEBUG, "\n");
-	//sp5100_restore_gpio(SP5100_GPIO49_52, backup);
-
-	return status;
-}