Get rid of the total impact. Vendor died 5 years ago and nobody cares.

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4703 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

8 files changed, 0 insertions, 484 deletions

diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig
index a7bada779f..2837cb5128 100644
--- a/src/mainboard/Kconfig
+++ b/src/mainboard/Kconfig
@@ -92,8 +92,6 @@ config VENDOR_TELEVIDEO
 	bool "TeleVideo"
 config VENDOR_THOMSON
 	bool "Thomson"
-config VENDOR_TOTAL_IMPACT
-	bool "Total Impact"
 config VENDOR_TYAN
 	bool "Tyan"
 config VENDOR_VIA
@@ -323,11 +321,6 @@ config MAINBOARD_VENDOR
 
 config MAINBOARD_VENDOR
 	string
-	default "Total Impact"
-	depends on VENDOR_TOTAL_IMPACT
-
-config MAINBOARD_VENDOR
-	string
 	default "Tyan"
 	depends on VENDOR_TYAN
 
@@ -390,7 +383,6 @@ source "src/mainboard/technexion/Kconfig"
 source "src/mainboard/technologic/Kconfig"
 source "src/mainboard/televideo/Kconfig"
 source "src/mainboard/thomson/Kconfig"
-source "src/mainboard/totalimpact/Kconfig"
 source "src/mainboard/tyan/Kconfig"
 source "src/mainboard/via/Kconfig"
 
diff --git a/src/mainboard/totalimpact/Kconfig b/src/mainboard/totalimpact/Kconfig
deleted file mode 100644
index 792d600548..0000000000
--- a/src/mainboard/totalimpact/Kconfig
+++ /dev/null
@@ -1 +0,0 @@
-#
diff --git a/src/mainboard/totalimpact/briq/Config.lb b/src/mainboard/totalimpact/briq/Config.lb
deleted file mode 100644
index c380a86848..0000000000
--- a/src/mainboard/totalimpact/briq/Config.lb
+++ /dev/null
@@ -1,49 +0,0 @@
-##
-## Config file for the Total Impact briQ
-##
-
-##
-## Early board initialization, called from ppc_main()
-##
-initobject init.o
-initobject clock.o
-
-##
-## Stage 2 timer support
-##
-object clock.o
-
-arch ppc end
-
-if CONFIG_BRIQ_750FX
-dir /cpu/ppc/ppc7xx
-end
-if CONFIG_BRIQ_7400
-dir /cpu/ppc/mpc74xx
-end
-
-##
-## Include the secondary Configuration files 
-##
-chip northbridge/ibm/cpc710
-	device pci_domain 0 on # 32bit pci bridge
-		device pci 0.0 on 
-			chip southbridge/winbond/w83c553
-				# FIXME  The function numbers are ok but the device id is wrong here!
-				device pci 0.0 on end # pci to isa bridge
-				device pci 0.1 on end # pci ide controller
-			end
-		end
-	end
-	device cpu_bus 0 on 
-	#	chip cpu/ppc/ppc7xx
-	#		device cpu 0 on end
-	#	end
-	end
-end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-addaction coreboot.a "$(CONFIG_CROSS_COMPILE)ranlib coreboot.a"
diff --git a/src/mainboard/totalimpact/briq/Options.lb b/src/mainboard/totalimpact/briq/Options.lb
deleted file mode 100644
index b33efdd4a0..0000000000
--- a/src/mainboard/totalimpact/briq/Options.lb
+++ /dev/null
@@ -1,137 +0,0 @@
-##
-## Config file for the Total Impact briQ
-##
-
-uses CONFIG_TTYS0_DIV
-uses CONFIG_CBFS
-uses CONFIG_ARCH_X86
-uses CONFIG_TTYS0_BASE
-uses CONFIG_BRIQ_750FX
-uses CONFIG_BRIQ_7400
-uses CONFIG_ISA_IO_BASE
-uses CONFIG_ISA_MEM_BASE
-uses CONFIG_PCIC0_CFGADDR
-uses CONFIG_PCIC0_CFGDATA
-uses CONFIG_IO_BASE
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_COMPRESS 
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL 
-uses CONFIG_USE_INIT
-uses CONFIG_NO_POST
-uses CONFIG_CONSOLE_SERIAL8250 
-uses CONFIG_IDE_PAYLOAD 
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_IDE_BOOT_DRIVE
-uses CONFIG_IDE_SWAB CONFIG_IDE_OFFSET 
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_RESET
-uses CONFIG_EXCEPTION_VECTORS
-uses CONFIG_ROMBASE
-uses CONFIG_ROMSTART
-uses CONFIG_RAMBASE
-uses CONFIG_RAMSTART
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_BRIQ_750FX 
-uses CONFIG_BRIQ_7400
-uses CONFIG_SYS_CLK_FREQ
-
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-
-##
-## Set memory map
-##
-default CONFIG_ISA_IO_BASE=0x80000000
-default CONFIG_ISA_MEM_BASE=0xc0000000
-default CONFIG_PCIC0_CFGADDR=0xff5f8000
-default CONFIG_PCIC0_CFGDATA=0xff5f8010
-default CONFIG_IO_BASE=CONFIG_ISA_IO_BASE
-
-##
-## The briQ uses weird clocking, 4 = 115200
-##
-default CONFIG_TTYS0_DIV=4
-##
-## Set UART base address
-##
-default CONFIG_TTYS0_BASE=0x3f8
-
-##
-## The default compiler
-##
-default CC="$(CONFIG_CROSS_COMPILE)gcc"
-default HOSTCC="gcc"
-## use a cross compiler
-#default CONFIG_CROSS_COMPILE="powerpc-eabi-"
-#default CONFIG_CROSS_COMPILE="ppc_74xx-"
-default CONFIG_ARCH_X86=0
-
-## Use stage 1 initialization code
-default CONFIG_USE_INIT=1
-
-## We don't use compressed image
-default CONFIG_COMPRESS=0
-
-## Turn off POST codes
-default CONFIG_NO_POST=1
-
-## Enable serial console
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Boot linux from IDE
-default CONFIG_IDE_PAYLOAD=1
-default CONFIG_IDE_BOOT_DRIVE=0
-default CONFIG_IDE_SWAB=1
-default CONFIG_IDE_OFFSET=0
-
-# ROM is 1Mb
-default CONFIG_ROM_SIZE=1048576
-default CONFIG_ROM_IMAGE_SIZE=128*1024
-
-# Set stack and heap sizes (stage 2)
-default CONFIG_STACK_SIZE=0x10000
-default CONFIG_HEAP_SIZE=0x10000
-
-##
-## System clock
-##
-default CONFIG_SYS_CLK_FREQ=33
-
-# Sandpoint Demo Board
-## Base of ROM
-default CONFIG_ROMBASE=0xfff00000
-
-## Sandpoint reset vector
-default CONFIG_RESET=CONFIG_ROMBASE+0x100
-
-## Exception vectors (other than reset vector)
-default CONFIG_EXCEPTION_VECTORS=CONFIG_RESET+0x100
-
-## Start of coreboot in the boot rom
-## = CONFIG_RESET + exeception vector table size
-default CONFIG_ROMSTART=CONFIG_RESET+0x3100
-
-## Coreboot C code runs at this location in RAM
-default CONFIG_RAMBASE=0x00100000
-default CONFIG_RAMSTART=0x00100000
-
-default CONFIG_BRIQ_750FX=1
-#default CONFIG_BRIQ_7400=1
-
-### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
-end
diff --git a/src/mainboard/totalimpact/briq/briQ7400.cfg b/src/mainboard/totalimpact/briq/briQ7400.cfg
deleted file mode 100644
index 22c64f7c77..0000000000
--- a/src/mainboard/totalimpact/briq/briQ7400.cfg
+++ /dev/null
@@ -1,178 +0,0 @@
-; bdiGDB configuration file for briQ (http://www.totalimpact.com)
-; ---------------------------------------------------------------
-;
-; NOTE: As of June 2004, you will need to install a pull-down
-;       on the COP/JTAG QACK line. Without this, the BDI2000
-;	is not able to halt the CPU
-;       (http://www.ultsol.com/faq-P210.htm)
-;
-[INIT]
-; init core register
-WREG    MSR             0x00000000      ;clear MSR
-;
-; init CPC710
-;
-WM32    0xFF000010      0xF0000000	; RSTR
-WM32    0xFF001020      0x00000000	; SIOC
-WM32    0xFF001000      0x00780000	; UCTL (resID=7|TBE)
-WM32    0xFF001030      0x00000000	; ABCNTL
-WM32    0xFF001040      0x00000000	; SRST
-WM32    0xFF001050      0x00000000	; ERRC
-WM32    0xFF001060      0x00000000	; SESR
-WM32    0xFF001070      0x00000000	; SEAR
-WM32    0xFF001100      0x000000E0	; PGCHP (PReP|ARTRY|750|SYS_TEA)
-WM32    0xFF001130      0x40000000	; GPDIR
-WM32    0xFF001150      0x40000000	; GPOUT
-WM32    0xFF001160      0x709C2508	; ATAS
-WM32    0xFF001170      0x00000000	; AVDG
-WM32    0xFF001220      0x00000000	; MESR
-WM32    0xFF001230      0x00000000	; MEAR
-WM32    0xFF001210      0x00000000	; MWPR
-WM32    0xFF001120      0x00000000	; RGBAN1
-;
-; init memory - this assumes 2 x 512MB DIMMs
-;
-WM32    0xFF001300      0x80000080	; MCER0
-WM32    0xFF001310      0x82000080	; MCER1
-WM32    0xFF001320      0x00000000	; MCER2
-WM32    0xFF001330      0x00000000	; MCER3
-WM32    0xFF001340      0x00000000	; MCER4
-WM32    0xFF001350      0x00000000	; MCER5
-WM32    0xFF001200      0xD2B06000	; MCCR
-DELAY 1000
-;
-; enable pci
-;
-WM32    0xFF00000C      0x80000002	; CNFR
-WM32    0xFF200018      0xFF500000	; PCIBAR
-WM32    0xFF201000      0x80000000	; PCIENB
-WM32    0xFF00000C      0x00000000	; CNFR
-;
-; config pci
-;
-WM32    0xFF5F8000      0x06000080
-WM16    0xFF5F8010      0xFFFF
-WM32    0xFF5F8000      0x40000080
-WM16    0xFF5F8010      0x0000
-WM32    0xFF5F6120      0x40000000	; PCIDG
-WM32    0xFF5F7800      0x00000000	; PIBAR
-WM32    0xFF5F7810      0x00000000	; PMBAR
-WM32    0xFF5F7F20      0xA000C000	; PR
-WM32    0xFF5F7F30      0xFC000000	; ACR
-WM32    0xFF5F7F40      0xF8000000	; MSIZE
-WM32    0xFF5F7F60      0xF8000000	; IOSIZE
-WM32    0xFF5F7F80      0xC0000000	; SMBAR
-WM32    0xFF5F7FC0      0x80000000	; SIBAR
-WM32    0xFF5F8100      0x00000080	; PSSIZE
-WM32    0xFF5F8120      0x00000000	; BARPS
-WM32    0xFF5F8140      0x00000080	; PSBAR
-WM32    0xFF5F8200      0x00000000	; BPMDLK
-WM32    0xFF5F8210      0x00000000	; TPMDLK
-WM32    0xFF5F8220      0x00000000	; BIODLK
-WM32    0xFF5F8230      0x00000000	; TIODLK
-WM32    0xFF5F8000      0x04000080
-WM16    0xFF5F8010      0xA7FD
-WM32    0xFF5F7EF0      0xFC000000	; CRR
-;
-; VFD - output the sequence '01234' to show 
-;       something is happening
-;
-;WM8     0x80000390	0x38
-;WM8     0x80000390	0x01
-;WM8     0x80000390	0x0C
-;WM8     0x80000390	0x06
-;WM8     0x80000390	0x02
-;DELAY 100
-;WM8     0x80000391	0x30
-;DELAY 100
-;WM8     0x80000391	0x31
-;DELAY 100
-;WM8     0x80000391	0x32
-;DELAY 100
-;WM8     0x80000391	0x33
-;DELAY 100
-;WM8     0x80000391	0x34
-;
-; UART - output the sequence '01234' to show
-;        something is happening
-;
-WM8     0x800003F9	0
-WM8     0x800003FA	1
-WM8     0x800003FB	0x83
-WM8     0x800003F8	4 		; 115200
-WM8     0x800003F9	0
-WM8     0x800003FB	0x3
-DELAY 100
-WM8     0x800003F8	0x30
-DELAY 100
-WM8     0x800003F8	0x31
-DELAY 100
-WM8     0x800003F8	0x32
-DELAY 100
-WM8     0x800003F8	0x33
-DELAY 100
-WM8     0x800003F8	0x34
-;
-; define maximal transfer size
-;TSZ1    0xFF800000      0xFFFFFFFF      ;ROM space (only for PCI boot ROM)
-TSZ4    0xFF800000      0xFFFFFFFF      ;ROM space (only for Local bus flash)
-
-
-[TARGET]
-CPUTYPE     7400        ;the CPU type (603EV,750,8240,8260,7400)
-JTAGCLOCK   0           ;use 16 MHz JTAG clock
-WORKSPACE   0x00000000	;workspace in target RAM for data cache flush
-BDIMODE     AGENT     	;the BDI working mode (LOADONLY | AGENT | GATEWAY)
-BREAKMODE   HARD      	;SOFT or HARD, HARD uses PPC hardware breakpoint
-STEPMODE    TRACE        ;TRACE or HWBP, HWPB uses a hardware breakpoint
-;VECTOR      CATCH       ;catch unhandled exceptions
-DCACHE      FLUSH	;data cache flushing (FLUSH | NOFLUSH)
-;PARITY      ON          ;enable data parity generation
-;MEMDELAY    4000        ;additional memory access delay
-;REGLIST     STD         ;select register to transfer to GDB
-;L2PM        0x00100000 0x80000 ;L2 privat memory
-BOOTADDR 0xfff00100
-STARTUP RESET
-
-[HOST]
-FORMAT      ELF
-LOAD        MANUAL        ;load code MANUAL or AUTO after reset
-DEBUGPORT   2001
-
-[FLASH]
-; Am29LV800BB on local processor bus (RCS0)
-; set PPMC7410 switch SW2-1 OFF => ROM on Local bus
-; enable flash write in PICR1 (see INIT part)
-; set maximal transfer size to 4 bytes (see INIT part)
-CHIPTYPE    AM29F     ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16)
-CHIPSIZE    0x100000    ;The size of one flash chip in bytes (e.g. Am29LV800BB = 0x100000)
-BUSWIDTH    8           ;The width of the flash memory bus in bits (8 | 16 | 32 | 64)
-;WORKSPACE   0x00000000  ;workspace in SDRAM
-FILE        coreboot.rom
-FORMAT      ELF
-ERASE       0xFFF00000  ;erase sector 0 of flash
-ERASE       0xFFF10000  ;erase sector 1 of flash
-ERASE       0xFFF20000  ;erase sector 2 of flash
-ERASE       0xFFF30000  ;erase sector 3 of flash
-ERASE       0xFFF40000  ;erase sector 4 of flash
-ERASE       0xFFF50000  ;erase sector 5 of flash
-ERASE       0xFFF60000  ;erase sector 6 of flash
-ERASE       0xFFF70000  ;erase sector 7 of flash
-;ERASE       0xFFF80000  ;erase sector 8 of flash
-;ERASE       0xFFF90000  ;erase sector 9 of flash
-;ERASE       0xFFFA0000  ;erase sector 10 of flash
-;ERASE       0xFFFB0000  ;erase sector 11 of flash
-;ERASE       0xFFFC0000  ;erase sector 12 of flash
-;ERASE       0xFFFD0000  ;erase sector 13 of flash
-;ERASE       0xFFFE0000  ;erase sector 14 of flash
-;ERASE       0xFFFF0000  ;erase sector 15 of flash
-
-[REGS]
-;DMM1        0xFC000000                  ;Embedded utility memory base address
-;IMM1        0xFEC00000  0xFEE00000      ;configuration registers at byte offset 0
-;IMM2        0xFEC00000  0xFEE00001      ;configuration registers at byte offset 1
-;IMM3        0xFEC00000  0xFEE00002      ;configuration registers at byte offset 2
-;IMM4        0xFEC00000  0xFEE00003      ;configuration registers at byte offset 3
-FILE        cpc700.def
-
-
diff --git a/src/mainboard/totalimpact/briq/clock.c b/src/mainboard/totalimpact/briq/clock.c
deleted file mode 100644
index 76827653a6..0000000000
--- a/src/mainboard/totalimpact/briq/clock.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include <stdint.h>
-#include "../../../northbridge/ibm/cpc710/cpc710.h"
-
-/*
- * Bus clock jumper settings on SIOR0 27:28
- */
-static uint32_t BusClockSpeed[] = {
-	66000000,	/* 00 */
-	83000000,	/* 01 */
-	100000000,	/* 10 */
-	133000000	/* 11 */
-};
-
-/*
- * Timer frequency is 1/4 of the bus clock frequency.
- *
- * For the briQ, bits 27:28 of SIOR0 encode bus clock frequency.
- */
-unsigned long 
-get_timer_freq(void)
-{
-	uint32_t sior0 = getCPC710(CPC710_SDRAM0_SIOR0);
-
-	return BusClockSpeed[(sior0 >> 3) & 0x2] / 4;
-}
-
-/*
- * Frequency of PCI bus.
- * 
- * For the briQ, bit 29 of SIOR0 is 66MHz enable (active low).
- */
-unsigned long 
-get_pci_bus_freq(void)
-{
-	uint32_t sior0 = getCPC710(CPC710_SDRAM0_SIOR0);
-
-	if (sior0 & 0x4 == 0x4)
-		return 33000000;
-
-	return 66000000;
-}
-
diff --git a/src/mainboard/totalimpact/briq/devicetree.cb b/src/mainboard/totalimpact/briq/devicetree.cb
deleted file mode 100644
index ceb278787d..0000000000
--- a/src/mainboard/totalimpact/briq/devicetree.cb
+++ /dev/null
@@ -1,22 +0,0 @@
-chip northbridge/ibm/cpc710
-	device pci_domain 0 on # 32bit pci bridge
-		device pci 0.0 on 
-			chip southbridge/winbond/w83c553
-				# FIXME  The function numbers are ok but the device id is wrong here!
-				device pci 0.0 on end # pci to isa bridge
-				device pci 0.1 on end # pci ide controller
-			end
-		end
-	end
-	device cpu_bus 0 on 
-	#	chip cpu/ppc/ppc7xx
-	#		device cpu 0 on end
-	#	end
-	end
-end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-addaction coreboot.a "$(CONFIG_CROSS_COMPILE)ranlib coreboot.a"
diff --git a/src/mainboard/totalimpact/briq/init.c b/src/mainboard/totalimpact/briq/init.c
deleted file mode 100644
index b7edf0b7e9..0000000000
--- a/src/mainboard/totalimpact/briq/init.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2003, Greg Watson <gwatson@lanl.gov>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/*
- * Do very early board initialization:
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc.h>
-#include <arch/io.h>
-#include <console/console.h>
-#include <uart8250.h>
-
-void
-board_init(void)
-{
-}
-
-void
-board_init2(void)
-{
-        /*
-         * Enable UART
-         */
-        uart8250_init(CONFIG_TTYS0_BASE, CONFIG_TTYS0_DIV, CONFIG_TTYS0_LCS);
-        printk_info("briQ initialized...\n");
-
-}