diff options
| author | Matt DeVillier <matt.devillier@gmail.com> | 2016-11-27 02:19:02 -0600 |
|---|---|---|
| committer | Martin Roth <martinroth@google.com> | 2016-12-05 19:06:47 +0100 |
| commit | c12e5ae1a5d809a4b74774d28a1c231591400bd3 (patch) | |
| tree | 0c74e22f3e1f75a34b96ddf90be0fba2702e2efa /src/mainboard | |
| parent | b5a74d6ca21139ddcb9a613f810338b6e97f27b9 (diff) | |
| download | coreboot-c12e5ae1a5d809a4b74774d28a1c231591400bd3.tar.xz | |
Add/Combine Haswell Chromebooks using variant board scheme
Combine existing boards google/falco and google/peppy with new
ChromeOS devices leon and wolf, using their common reference board
(slippy) as a base.
Chromium sources used:
firmware-falco_peppy-4389.81.B d7703cac [falco: Add support for Samsung...]
firmware-leon-4389.61.B ea1bf55 [haswell: Enable 2x Refresh Mode]
firmware-wolf-4389.24.B 7c5a9c2 [Wolf: haswell: Add small delay before...]
Additionally, some minor cleanup/changes were made:
- I2C devices set to use ACPI (vs PCI) mode
- I2C device ACPI entries adjusted as per above
- I2C devices set to use level (vs edge) interrupt triggering
- XHCI finalization enabled in devicetree
- HDA verb entries use simplified macro entry format
Existing google/falco and google/peppy boards will be removed in a
subsequent commit.
Variant setup modeled after google/beltino
Change-Id: I087df5f98c1bb4ddd0ab24ee9ff786a9d38d87be
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17621
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Diffstat (limited to 'src/mainboard')
66 files changed, 5242 insertions, 0 deletions
diff --git a/src/mainboard/google/slippy/Kconfig b/src/mainboard/google/slippy/Kconfig new file mode 100644 index 0000000000..045d6a8c0b --- /dev/null +++ b/src/mainboard/google/slippy/Kconfig @@ -0,0 +1,88 @@ +config BOARD_GOOGLE_BASEBOARD_SLIPPY + def_bool n + select SYSTEM_TYPE_LAPTOP + select CPU_INTEL_HASWELL + select NORTHBRIDGE_INTEL_HASWELL + select SOUTHBRIDGE_INTEL_LYNXPOINT + select INTEL_LYNXPOINT_LP + select BOARD_ROMSIZE_KB_8192 + select EC_GOOGLE_CHROMEEC + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_ACPI_RESUME + select HAVE_SMI_HANDLER + select MAINBOARD_HAS_CHROMEOS + select MAINBOARD_HAS_LPC_TPM + select MAINBOARD_HAS_NATIVE_VGA_INIT if (BOARD_GOOGLE_FALCO || BOARD_GOOGLE_PEPPY) + select INTEL_DP if (BOARD_GOOGLE_FALCO || BOARD_GOOGLE_PEPPY) + select INTEL_DDI if (BOARD_GOOGLE_FALCO || BOARD_GOOGLE_PEPPY) + select INTEL_INT15 + +if BOARD_GOOGLE_BASEBOARD_SLIPPY + +config CHROMEOS + select EC_GOOGLE_CHROMEEC_SWITCHES + select EC_SOFTWARE_SYNC + select LID_SWITCH + select MAINBOARD_DO_NATIVE_VGA_INIT if (BOARD_GOOGLE_FALCO || BOARD_GOOGLE_PEPPY) + select VBOOT_VBNV_CMOS + select VIRTUAL_DEV_SWITCH + +config MAINBOARD_DIR + string + default google/slippy + +config VARIANT_DIR + string + default "falco" if BOARD_GOOGLE_FALCO + default "leon" if BOARD_GOOGLE_LEON + default "peppy" if BOARD_GOOGLE_PEPPY + default "wolf" if BOARD_GOOGLE_WOLF + +config MAINBOARD_PART_NUMBER + string + default "Falco" if BOARD_GOOGLE_FALCO + default "Leon" if BOARD_GOOGLE_LEON + default "Peppy" if BOARD_GOOGLE_PEPPY + default "Wolf" if BOARD_GOOGLE_WOLF + +config MAINBOARD_FAMILY + string + default "Google_Slippy" + +config GBB_HWID + string + depends on CHROMEOS + default "X86 FALCO TEST 0289" if BOARD_GOOGLE_FALCO + default "X86 LEON TEST 5181" if BOARD_GOOGLE_LEON + default "X86 PEPPY TEST 4211" if BOARD_GOOGLE_PEPPY + default "X86 WOLF TEST 6457" if BOARD_GOOGLE_WOLF + +config DEVICETREE + string + default "variants/falco/devicetree.cb" if BOARD_GOOGLE_FALCO + default "variants/leon/devicetree.cb" if BOARD_GOOGLE_LEON + default "variants/peppy/devicetree.cb" if BOARD_GOOGLE_PEPPY + default "variants/wolf/devicetree.cb" if BOARD_GOOGLE_WOLF + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config MAX_CPUS + int + default 8 + +config VGA_BIOS_FILE + string + default "pci8086,0406.rom" + +config HAVE_IFD_BIN + bool + default n + +config HAVE_ME_BIN + bool + default n + +endif # BOARD_GOOGLE_BASEBOARD_SLIPPY diff --git a/src/mainboard/google/slippy/Kconfig.name b/src/mainboard/google/slippy/Kconfig.name new file mode 100644 index 0000000000..4aebcff52b --- /dev/null +++ b/src/mainboard/google/slippy/Kconfig.name @@ -0,0 +1,15 @@ +config BOARD_GOOGLE_FALCO + bool "Falco" + select BOARD_GOOGLE_BASEBOARD_SLIPPY + +config BOARD_GOOGLE_LEON + bool "Leon" + select BOARD_GOOGLE_BASEBOARD_SLIPPY + +config BOARD_GOOGLE_PEPPY + bool "Peppy" + select BOARD_GOOGLE_BASEBOARD_SLIPPY + +config BOARD_GOOGLE_WOLF + bool "Wolf" + select BOARD_GOOGLE_BASEBOARD_SLIPPY diff --git a/src/mainboard/google/slippy/Makefile.inc b/src/mainboard/google/slippy/Makefile.inc new file mode 100644 index 0000000000..8c95ba115e --- /dev/null +++ b/src/mainboard/google/slippy/Makefile.inc @@ -0,0 +1,26 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +ramstage-$(CONFIG_EC_GOOGLE_CHROMEEC) += ec.c + +romstage-$(CONFIG_CHROMEOS) += chromeos.c +ramstage-$(CONFIG_CHROMEOS) += chromeos.c + +smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c + +romstage-y += variants/$(VARIANT_DIR)/romstage.c + +subdirs-y += variants/$(VARIANT_DIR) +CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include diff --git a/src/mainboard/google/slippy/acpi/ec.asl b/src/mainboard/google/slippy/acpi/ec.asl new file mode 100644 index 0000000000..58b9a55cc4 --- /dev/null +++ b/src/mainboard/google/slippy/acpi/ec.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* mainboard configuration */ +#include "../ec.h" + +/* ACPI code for EC functions */ +#include <ec/google/chromeec/acpi/ec.asl> diff --git a/src/mainboard/google/slippy/acpi/haswell_pci_irqs.asl b/src/mainboard/google/slippy/acpi/haswell_pci_irqs.asl new file mode 100644 index 0000000000..68ea474b51 --- /dev/null +++ b/src/mainboard/google/slippy/acpi/haswell_pci_irqs.asl @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* This is board specific information: IRQ routing for Haswell */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // Mini-HD Audio 0:3.0 + Package() { 0x0003ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 16 }, + Package() { 0x001cffff, 1, 0, 17 }, + Package() { 0x001cffff, 2, 0, 18 }, + Package() { 0x001cffff, 3, 0, 19 }, + // EHCI 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // XHCI 0:14.0 + Package() { 0x0014ffff, 0, 0, 18 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 22 }, + Package() { 0x001fffff, 1, 0, 18 }, + Package() { 0x001fffff, 2, 0, 17 }, + Package() { 0x001fffff, 3, 0, 16 }, + // Serial IO 0:15.0 + Package() { 0x0015ffff, 0, 0, 20 }, + Package() { 0x0015ffff, 1, 0, 21 }, + Package() { 0x0015ffff, 2, 0, 21 }, + Package() { 0x0015ffff, 3, 0, 21 }, + // SDIO 0:17.0 + Package() { 0x0017ffff, 0, 0, 23 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // Mini-HD Audio 0:3.0 + Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, + // EHCI 0:1d.0 + Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + // XHCI 0:14.0 + Package() { 0x0014ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }, + // Serial IO 0:15.0 + Package() { 0x0015ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, + Package() { 0x0015ffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x0015ffff, 2, \_SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x0015ffff, 3, \_SB.PCI0.LPCB.LNKF, 0 }, + // SDIO 0:17.0 + Package() { 0x0017ffff, 0, \_SB.PCI0.LPCB.LNKH, 0 }, + }) + } +} diff --git a/src/mainboard/google/slippy/acpi/platform.asl b/src/mainboard/google/slippy/acpi/platform.asl new file mode 100644 index 0000000000..1bd054da06 --- /dev/null +++ b/src/mainboard/google/slippy/acpi/platform.asl @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + /* Update AC status */ + Store (\_SB.PCI0.LPCB.EC0.ACEX, Local0) + if (LNotEqual (Local0, \PWRS)) { + Store (Local0, \PWRS) + Notify (\_SB.PCI0.LPCB.EC0.AC, 0x80) + } + + /* Update LID status */ + Store (\_SB.PCI0.LPCB.EC0.LIDS, Local0) + if (LNotEqual (Local0, \LIDS)) { + Store (Local0, \LIDS) + Notify (\_SB.LID0, 0x80) + } + + Return(Package(){0,0}) +} diff --git a/src/mainboard/google/slippy/acpi/superio.asl b/src/mainboard/google/slippy/acpi/superio.asl new file mode 100644 index 0000000000..0460b2b3b2 --- /dev/null +++ b/src/mainboard/google/slippy/acpi/superio.asl @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* mainboard configuration */ +#include "../ec.h" + +#define SIO_EC_MEMMAP_ENABLE // EC Memory Map Resources +#define SIO_EC_HOST_ENABLE // EC Host Interface Resources +#define SIO_EC_ENABLE_PS2K // Enable PS/2 Keyboard +#define SIO_EC_ENABLE_COM1 // Enable Serial Port 1 + +/* ACPI code for EC SuperIO functions */ +#include <ec/google/chromeec/acpi/superio.asl> diff --git a/src/mainboard/google/slippy/acpi/thermal.asl b/src/mainboard/google/slippy/acpi/thermal.asl new file mode 100644 index 0000000000..36b0e21604 --- /dev/null +++ b/src/mainboard/google/slippy/acpi/thermal.asl @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// Thermal Zone + +Scope (\_TZ) +{ + // Handler for throttle requests on this platform + // 0 = Stop throttling + // 1 = Start throttling + Method (THRT, 1, Serialized) + { + If (LEqual (Arg0, 0)) { + /* Disable Power Limit */ + \_SB.PCI0.MCHC.CTLD () + } Else { + /* Enable Power Limit */ + \_SB.PCI0.MCHC.CTLE (\F0PW) + } + } + + ThermalZone (THRM) + { + Name (_TC1, 0x02) + Name (_TC2, 0x05) + + // Thermal zone polling frequency: 10 seconds + Name (_TZP, 100) + + // Thermal sampling period for passive cooling: 2 seconds + Name (_TSP, 20) + + // Convert from Degrees C to 1/10 Kelvin for ACPI + Method (CTOK, 1) { + // 10th of Degrees C + Multiply (Arg0, 10, Local0) + + // Convert to Kelvin + Add (Local0, 2732, Local0) + + Return (Local0) + } + + // Threshold for OS to shutdown + Method (_CRT, 0, Serialized) + { + Return (CTOK (\TCRT)) + } + + // Threshold for passive cooling + Method (_PSV, 0, Serialized) + { + Return (CTOK (\TPSV)) + } + + // Processors used for passive cooling + Method (_PSL, 0, Serialized) + { + Return (\PPKG ()) + } + + Method (TCHK, 0, Serialized) + { + // Get Temperature from TIN# set in NVS + Store (\_SB.PCI0.LPCB.EC0.TINS (TMPS), Local0) + + // Check for sensor not calibrated + If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNCA)) { + Return (CTOK(0)) + } + + // Check for sensor not present + If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNPR)) { + Return (CTOK(0)) + } + + // Check for sensor not powered + If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNOP)) { + Return (CTOK(0)) + } + + // Check for sensor bad reading + If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TBAD)) { + Return (CTOK(0)) + } + + // Adjust by offset to get Kelvin + Add (\_SB.PCI0.LPCB.EC0.TOFS, Local0, Local0) + + // Convert to 1/10 Kelvin + Multiply (Local0, 10, Local0) + Return (Local0) + } + + Method (_TMP, 0, Serialized) + { + // Get temperature from EC in deci-kelvin + Store (TCHK (), Local0) + + // Critical temperature in deci-kelvin + Store (CTOK (\TCRT), Local1) + + If (LGreaterEqual (Local0, Local1)) { + Store ("CRITICAL TEMPERATURE", Debug) + Store (Local0, Debug) + + // Wait 1 second for EC to re-poll + Sleep (1000) + + // Re-read temperature from EC + Store (TCHK (), Local0) + + Store ("RE-READ TEMPERATURE", Debug) + Store (Local0, Debug) + } + + Return (Local0) + } + } +} diff --git a/src/mainboard/google/slippy/acpi_tables.c b/src/mainboard/google/slippy/acpi_tables.c new file mode 100644 index 0000000000..97b246ff6b --- /dev/null +++ b/src/mainboard/google/slippy/acpi_tables.c @@ -0,0 +1,84 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> +#include <vendorcode/google/chromeos/gnvs.h> +#include <ec/google/chromeec/ec.h> + +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/lynxpoint/nvs.h> +#include "thermal.h" + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->tmps = TEMPERATURE_SENSOR_ID; + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; + gnvs->tmax = MAX_TEMPERATURE; + gnvs->f0pw = EC_THROTTLE_POWER_LIMIT; + gnvs->flvl = 1; +} + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Enable USB ports in S3 */ + gnvs->s3u0 = 1; + gnvs->s3u1 = 1; + + /* Disable USB ports in S5 */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* TPM Present */ + gnvs->tpmp = 1; + + +#if CONFIG_CHROMEOS + gnvs->chromeos.vbt2 = google_ec_running_ro() ? + ACTIVE_ECFW_RO : ACTIVE_ECFW_RW; +#endif + + acpi_update_thermal_table(gnvs); +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} diff --git a/src/mainboard/google/slippy/board_info.txt b/src/mainboard/google/slippy/board_info.txt new file mode 100644 index 0000000000..4e2fd7d559 --- /dev/null +++ b/src/mainboard/google/slippy/board_info.txt @@ -0,0 +1,7 @@ +Vendor name: Google +Board name: Slippy Haswell Chromebook Reference device +Category: laptop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/google/slippy/chromeos.c b/src/mainboard/google/slippy/chromeos.c new file mode 100644 index 0000000000..22ec0742e2 --- /dev/null +++ b/src/mainboard/google/slippy/chromeos.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <string.h> +#include <bootmode.h> +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/common/gpio.h> +#include <vendorcode/google/chromeos/chromeos.h> + +#ifndef __PRE_RAM__ +#include <boot/coreboot_tables.h> + +void fill_lb_gpios(struct lb_gpios *gpios) +{ + struct lb_gpio chromeos_gpios[] = { + {58, ACTIVE_HIGH, 0, "write protect"}, + {-1, ACTIVE_HIGH, get_recovery_mode_switch(), "recovery"}, + {-1, ACTIVE_HIGH, get_developer_mode_switch(), "developer"}, + {-1, ACTIVE_HIGH, get_lid_switch(), "lid"}, + {-1, ACTIVE_HIGH, 0, "power"}, + {-1, ACTIVE_HIGH, gfx_get_init_done(), "oprom"}, + }; + lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios)); +} +#endif + +int get_write_protect_state(void) +{ + return get_gpio(58); +} + +static const struct cros_gpio cros_gpios[] = { + CROS_GPIO_REC_AL(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME), + CROS_GPIO_WP_AH(58, CROS_GPIO_DEVICE_NAME), +}; + +void mainboard_chromeos_acpi_generate(void) +{ + chromeos_acpi_gpio_generate(cros_gpios, ARRAY_SIZE(cros_gpios)); +} diff --git a/src/mainboard/google/slippy/chromeos.fmd b/src/mainboard/google/slippy/chromeos.fmd new file mode 100644 index 0000000000..0c05ce95ce --- /dev/null +++ b/src/mainboard/google/slippy/chromeos.fmd @@ -0,0 +1,38 @@ +FLASH@0xff800000 0x800000 { + SI_ALL@0x0 0x200000 { + SI_DESC@0x0 0x1000 + SI_ME@0x1000 0x1ff000 + } + SI_BIOS@0x200000 0x600000 { + RW_SECTION_A@0x0 0xf0000 { + VBLOCK_A@0x0 0x10000 + FW_MAIN_A(CBFS)@0x10000 0xdffc0 + RW_FWID_A@0xeffc0 0x40 + } + RW_SECTION_B@0xf0000 0xf0000 { + VBLOCK_B@0x0 0x10000 + FW_MAIN_B(CBFS)@0x10000 0xdffc0 + RW_FWID_B@0xeffc0 0x40 + } + RW_MRC_CACHE@0x1e0000 0x10000 + RW_ELOG@0x1f0000 0x4000 + RW_SHARED@0x1f4000 0x4000 { + SHARED_DATA@0x0 0x2000 + VBLOCK_DEV@0x2000 0x2000 + } + RW_VPD@0x1f8000 0x2000 + RW_UNUSED@0x1fa000 0x6000 + RW_LEGACY(CBFS)@0x200000 0x200000 + WP_RO@0x400000 0x200000 { + RO_VPD@0x0 0x4000 + RO_UNUSED@0x4000 0xc000 + RO_SECTION@0x10000 0x1f0000 { + FMAP@0x0 0x800 + RO_FRID@0x800 0x40 + RO_FRID_PAD@0x840 0x7c0 + GBB@0x1000 0x6f000 + COREBOOT(CBFS)@0x70000 0x180000 + } + } + } +} diff --git a/src/mainboard/google/slippy/cmos.layout b/src/mainboard/google/slippy/cmos.layout new file mode 100644 index 0000000000..b575e02970 --- /dev/null +++ b/src/mainboard/google/slippy/cmos.layout @@ -0,0 +1,110 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +# Status Register A +# ----------------------------------------------------------------- +# Status Register B +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +388 4 h 0 reboot_counter +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv +#544 440 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/google/slippy/dsdt.asl b/src/mainboard/google/slippy/dsdt.asl new file mode 100644 index 0000000000..56771c2886 --- /dev/null +++ b/src/mainboard/google/slippy/dsdt.asl @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/lynxpoint/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + // CPU + #include <cpu/intel/haswell/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <northbridge/intel/haswell/acpi/haswell.asl> + #include <southbridge/intel/lynxpoint/acpi/pch.asl> + + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + } + } + + Scope (\_SB.PCI0.RP01) + { + Device (WLAN) + { + Name (_ADR, Zero) + } + } + + // Mainboard specific + #include <variant/acpi/mainboard.asl> + + // Thermal handler + #include "acpi/thermal.asl" + + // Chrome OS specific + #include <vendorcode/google/chromeos/acpi/chromeos.asl> + + // Chipset specific sleep states + #include <southbridge/intel/lynxpoint/acpi/sleepstates.asl> +} diff --git a/src/mainboard/google/slippy/ec.c b/src/mainboard/google/slippy/ec.c new file mode 100644 index 0000000000..c011f33d60 --- /dev/null +++ b/src/mainboard/google/slippy/ec.c @@ -0,0 +1,47 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +#include <types.h> +#include <console/console.h> +#include <ec/google/chromeec/ec.h> +#include "ec.h" + +void mainboard_ec_init(void) +{ + printk(BIOS_DEBUG, "mainboard_ec_init\n"); + post_code(0xf0); + + /* Restore SCI event mask on resume. */ + if (acpi_is_wakeup_s3()) { + google_chromeec_log_events(MAINBOARD_EC_LOG_EVENTS | + MAINBOARD_EC_S3_WAKE_EVENTS); + + /* Disable SMI and wake events */ + google_chromeec_set_smi_mask(0); + + /* Clear pending events */ + while (google_chromeec_get_event() != 0); + google_chromeec_set_sci_mask(MAINBOARD_EC_SCI_EVENTS); + } else { + google_chromeec_log_events(MAINBOARD_EC_LOG_EVENTS | + MAINBOARD_EC_S5_WAKE_EVENTS); + } + + /* Clear wake events, these are enabled on entry to sleep */ + google_chromeec_set_wake_mask(0); + + post_code(0xf1); +} diff --git a/src/mainboard/google/slippy/ec.h b/src/mainboard/google/slippy/ec.h new file mode 100644 index 0000000000..22942eed15 --- /dev/null +++ b/src/mainboard/google/slippy/ec.h @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef MAINBOARD_EC_H +#define MAINBOARD_EC_H + +#include <ec/ec.h> +#include <ec/google/chromeec/ec_commands.h> + +#define EC_SCI_GPI 36 /* GPIO36 is EC_SCI# */ +#define EC_SMI_GPI 34 /* GPIO34 is EC_SMI# */ + +#define MAINBOARD_EC_SCI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_OVERLOAD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_CHARGER)) + +#define MAINBOARD_EC_SMI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED)) + +/* EC can wake from S5 with lid or power button */ +#define MAINBOARD_EC_S5_WAKE_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) + +/* EC can wake from S3 with lid or power button or key press */ +#define MAINBOARD_EC_S3_WAKE_EVENTS \ + (MAINBOARD_EC_S5_WAKE_EVENTS |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED)) + +/* Log EC wake events plus EC shutdown events */ +#define MAINBOARD_EC_LOG_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_SHUTDOWN)) + +#endif diff --git a/src/mainboard/google/slippy/fadt.c b/src/mainboard/google/slippy/fadt.c new file mode 100644 index 0000000000..2452ac2a36 --- /dev/null +++ b/src/mainboard/google/slippy/fadt.c @@ -0,0 +1,152 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/lynxpoint/pch.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = get_pmbase(); + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x80; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 32; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 0; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 0; + fadt->x_gpe0_blk.bit_width = 0; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = 0; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/google/slippy/mainboard.c b/src/mainboard/google/slippy/mainboard.c new file mode 100644 index 0000000000..10252d82b1 --- /dev/null +++ b/src/mainboard/google/slippy/mainboard.c @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <types.h> +#include <string.h> +#include <smbios.h> +#include <device/device.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <southbridge/intel/lynxpoint/pch.h> +#include <vendorcode/google/chromeos/chromeos.h> +#include "ec.h" +#include "onboard.h" + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} + + + +static void mainboard_init(device_t dev) +{ + mainboard_ec_init(); +} + +static int mainboard_smbios_data(device_t dev, int *handle, + unsigned long *current) +{ + int len = 0; + + len += smbios_write_type41( + current, handle, + BOARD_LIGHTSENSOR_NAME, /* name */ + BOARD_LIGHTSENSOR_IRQ, /* instance */ + BOARD_LIGHTSENSOR_I2C_BUS, /* segment */ + BOARD_LIGHTSENSOR_I2C_ADDR, /* bus */ + 0, /* device */ + 0); /* function */ + + len += smbios_write_type41( + current, handle, + BOARD_TRACKPAD_NAME, /* name */ + BOARD_TRACKPAD_IRQ, /* instance */ + BOARD_TRACKPAD_I2C_BUS, /* segment */ + BOARD_TRACKPAD_I2C_ADDR, /* bus */ + 0, /* device */ + 0); /* function */ + + len += smbios_write_type41( + current, handle, + BOARD_TOUCHSCREEN_NAME, /* name */ + BOARD_TOUCHSCREEN_IRQ, /* instance */ + BOARD_TOUCHSCREEN_I2C_BUS, /* segment */ + BOARD_TOUCHSCREEN_I2C_ADDR, /* bus */ + 0, /* device */ + 0); /* function */ + + return len; +} + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = mainboard_init; + dev->ops->get_smbios_data = mainboard_smbios_data; + dev->ops->acpi_inject_dsdt_generator = chromeos_dsdt_generator; + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/google/slippy/onboard.h b/src/mainboard/google/slippy/onboard.h new file mode 100644 index 0000000000..9e1dc8bf69 --- /dev/null +++ b/src/mainboard/google/slippy/onboard.h @@ -0,0 +1,39 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +#define BOARD_LIGHTSENSOR_NAME "lightsensor" +#define BOARD_LIGHTSENSOR_IRQ 51 /* PIRQT */ +#define BOARD_LIGHTSENSOR_I2C_BUS 2 /* I2C1 */ +#define BOARD_LIGHTSENSOR_I2C_ADDR 0x44 + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ 37 /* PIRQV */ +#define BOARD_TRACKPAD_WAKE_GPIO 12 /* GPIO12 */ +#define BOARD_TRACKPAD_I2C_BUS 1 /* I2C0 */ +#define BOARD_TRACKPAD_I2C_ADDR 0x67 + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ 38 /* PIRQW */ +#define BOARD_TOUCHSCREEN_WAKE_GPIO 25 /* GPIO25 */ +#define BOARD_TOUCHSCREEN_I2C_BUS 2 /* I2C1 */ +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4a + +#define PEPPY_BOARD_VERSION_PROTO 0 +#define PEPPY_BOARD_VERSION_EVT 1 + +#endif diff --git a/src/mainboard/google/slippy/romstage.c b/src/mainboard/google/slippy/romstage.c new file mode 100644 index 0000000000..82931fc545 --- /dev/null +++ b/src/mainboard/google/slippy/romstage.c @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <cpu/intel/haswell/haswell.h> +#include "variant.h" + + +void mainboard_romstage_entry(unsigned long bist) +{ + variant_romstage_entry(bist); +} diff --git a/src/mainboard/google/slippy/smihandler.c b/src/mainboard/google/slippy/smihandler.c new file mode 100644 index 0000000000..24f76f5de3 --- /dev/null +++ b/src/mainboard/google/slippy/smihandler.c @@ -0,0 +1,154 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/lynxpoint/nvs.h> +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/common/gpio.h> +#include <southbridge/intel/lynxpoint/me.h> +#include <northbridge/intel/haswell/haswell.h> +#include <cpu/intel/haswell/haswell.h> +#include <elog.h> + +/* Include EC functions */ +#include <ec/google/chromeec/ec.h> +#include "ec.h" + +/* Codec enable: GPIO45 */ +#define GPIO_PP3300_CODEC_EN 45 +/* GPIO46 controls the WLAN_DISABLE_L signal. */ +#define GPIO_WLAN_DISABLE_L 46 +#define GPIO_LTE_DISABLE_L 59 + +static u8 mainboard_smi_ec(void) +{ + u8 cmd = google_chromeec_get_event(); + u32 pm1_cnt; + +#if CONFIG_ELOG_GSMI + /* Log this event */ + if (cmd) + elog_add_event_byte(ELOG_TYPE_EC_EVENT, cmd); +#endif + + switch (cmd) { + case EC_HOST_EVENT_LID_CLOSED: + printk(BIOS_DEBUG, "LID CLOSED, SHUTDOWN\n"); + + /* Go to S5 */ + pm1_cnt = inl(get_pmbase() + PM1_CNT); + pm1_cnt |= (0xf << 10); + outl(pm1_cnt, get_pmbase() + PM1_CNT); + break; + } + + return cmd; +} + +/* gpi_sts is GPIO 47:32 */ +void mainboard_smi_gpi(u32 gpi_sts) +{ + if (gpi_sts & (1 << (EC_SMI_GPI - 32))) { + /* Process all pending events */ + while (mainboard_smi_ec() != 0); + } +} + +void mainboard_smi_sleep(u8 slp_typ) +{ + /* Disable USB charging if required */ + switch (slp_typ) { + case ACPI_S3: + if (smm_get_gnvs()->s3u0 == 0) + google_chromeec_set_usb_charge_mode( + 0, USB_CHARGE_MODE_DISABLED); + if (smm_get_gnvs()->s3u1 == 0) + google_chromeec_set_usb_charge_mode( + 1, USB_CHARGE_MODE_DISABLED); + + /* Prevent leak from standby rail to WLAN rail in S3. */ + set_gpio(GPIO_WLAN_DISABLE_L, 0); + set_gpio(GPIO_PP3300_CODEC_EN, 0); + /* Disable LTE */ + set_gpio(GPIO_LTE_DISABLE_L, 0); + + /* Enable wake events */ + google_chromeec_set_wake_mask(MAINBOARD_EC_S3_WAKE_EVENTS); + break; + case ACPI_S4: + case ACPI_S5: + if (smm_get_gnvs()->s5u0 == 0) + google_chromeec_set_usb_charge_mode( + 0, USB_CHARGE_MODE_DISABLED); + if (smm_get_gnvs()->s5u1 == 0) + google_chromeec_set_usb_charge_mode( + 1, USB_CHARGE_MODE_DISABLED); + + /* Prevent leak from standby rail to WLAN rail in S5. */ + set_gpio(GPIO_WLAN_DISABLE_L, 0); + set_gpio(GPIO_PP3300_CODEC_EN, 0); + /* Disable LTE */ + set_gpio(GPIO_LTE_DISABLE_L, 0); + + /* Enable wake events */ + google_chromeec_set_wake_mask(MAINBOARD_EC_S5_WAKE_EVENTS); + break; + } + + /* Disable SCI and SMI events */ + google_chromeec_set_smi_mask(0); + google_chromeec_set_sci_mask(0); + + /* Clear pending events that may trigger immediate wake */ + while (google_chromeec_get_event() != 0); +} + + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 apmc) +{ + switch (apmc) { + case APM_CNT_FINALIZE: + if (mainboard_finalized) { + printk(BIOS_DEBUG, "SMI#: Already finalized\n"); + return 0; + } + + intel_pch_finalize_smm(); + intel_northbridge_haswell_finalize_smm(); + intel_cpu_haswell_finalize_smm(); + + mainboard_finalized = 1; + break; + case APM_CNT_ACPI_ENABLE: + google_chromeec_set_smi_mask(0); + /* Clear all pending events */ + while (google_chromeec_get_event() != 0); + google_chromeec_set_sci_mask(MAINBOARD_EC_SCI_EVENTS); + break; + case APM_CNT_ACPI_DISABLE: + google_chromeec_set_sci_mask(0); + /* Clear all pending events */ + while (google_chromeec_get_event() != 0); + google_chromeec_set_smi_mask(MAINBOARD_EC_SMI_EVENTS); + break; + } + return 0; +} diff --git a/src/mainboard/google/slippy/thermal.h b/src/mainboard/google/slippy/thermal.h new file mode 100644 index 0000000000..a2f8e7128f --- /dev/null +++ b/src/mainboard/google/slippy/thermal.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef THERMAL_H +#define THERMAL_H + +#define TEMPERATURE_SENSOR_ID 0 /* PECI */ + +/* Power level to set when EC requests throttle */ +#define EC_THROTTLE_POWER_LIMIT 12 /* 12W */ + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 99 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 95 + +/* Tj_max value for calculating PECI CPU temperature */ +#define MAX_TEMPERATURE 100 + +#endif diff --git a/src/mainboard/google/slippy/variant.h b/src/mainboard/google/slippy/variant.h new file mode 100644 index 0000000000..fe8b5e15a5 --- /dev/null +++ b/src/mainboard/google/slippy/variant.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VARIANT_H +#define VARAINT_H + +void variant_romstage_entry(unsigned long bist); + +#endif diff --git a/src/mainboard/google/slippy/variants/falco/Makefile.inc b/src/mainboard/google/slippy/variants/falco/Makefile.inc new file mode 100644 index 0000000000..aee33f9188 --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/Makefile.inc @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += gma.c i915io.c + +## DIMM SPD for on-board memory +SPD_BIN = $(obj)/spd.bin + +# Order of names in SPD_SOURCES is important! +SPD_SOURCES = Micron_4KTF25664HZ # 4GB / CH0 + CH1 (RAM_ID=000) +SPD_SOURCES += Hynix_HMT425S6AFR6A # 4GB / CH0 + CH1 (RAM_ID=001) +SPD_SOURCES += Elpida_EDJ4216EFBG # 4GB / CH0 + CH1 (RAM_ID=010) +SPD_SOURCES += Micron_4KTF25664HZ # 2GB / CH0 only (RAM_ID=011) +SPD_SOURCES += Hynix_HMT425S6AFR6A # 2GB / CH0 only (RAM_ID=100) +SPD_SOURCES += Elpida_EDJ4216EFBG # 2GB / CH0 only (RAM_ID=101) +SPD_SOURCES += Samsung_M471B5674QH0 # 4GB / CH0 + CH1 (RAM_ID=110) +SPD_SOURCES += Samsung_M471B5674QH0 # 2GB / CH0 only (RAM_ID=111) + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/slippy/variants/falco/devicetree.cb b/src/mainboard/google/slippy/variants/falco/devicetree.cb new file mode 100644 index 0000000000..cdf47cf5aa --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/devicetree.cb @@ -0,0 +1,125 @@ +chip northbridge/intel/haswell + # IGD Displays + register "gfx.ndid" = "3" + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" + + # Enable eDP Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Disable DisplayPort C Hotplug + register "gpu_dp_c_hotplug" = "0x00" + + # Enable HDMI Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + # Set backlight PWM values for eDP + register "gpu_cpu_backlight" = "0x00000200" + register "gpu_pch_backlight" = "0x04000000" + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "5" # 400ms (T4) + register "gpu_panel_power_up_delay" = "600" # 60ms (T1+T2) + register "gpu_panel_power_down_delay" = "600" # 60ms (T3+T7) + register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms (T5) + register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms (T6) + + device cpu_cluster 0 on + chip cpu/intel/haswell + device lapic 0 on end + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S) + + register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + device pci 03.0 on end # mini-hd audio + + chip southbridge/intel/lynxpoint + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # EC range is 0x800-0x9ff + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x00fc0901" + + # EC_SMI is GPIO34 + register "alt_gp_smi_en" = "0x0004" + register "gpe0_en_1" = "0x00000000" + # EC_SCI is GPIO36 + register "gpe0_en_2" = "0x00000010" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" + + register "ide_legacy_combined" = "0x0" + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x1" + + register "sio_acpi_mode" = "1" + register "sio_i2c0_voltage" = "0" # 3.3V + register "sio_i2c1_voltage" = "0" # 3.3V + + # Force enable ASPM for PCIe Port 1 + register "pcie_port_force_aspm" = "0x01" + + # Route all USB ports to XHCI per default + register "xhci_default" = "1" + + # Disable PCIe CLKOUT 1-5 and CLKOUT_XDP + register "icc_clock_disable" = "0x013e0000" + + device pci 13.0 off end # Smart Sound Audio DSP + device pci 14.0 on end # USB3 XHCI + device pci 15.0 on end # Serial I/O DMA + device pci 15.1 on end # I2C0 + device pci 15.2 on end # I2C1 + device pci 15.3 off end # GSPI0 + device pci 15.4 off end # GSPI1 + device pci 15.5 off end # UART0 + device pci 15.6 off end # UART1 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 17.0 off end # SDIO + device pci 19.0 off end # GbE + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1d.0 on end # USB2 EHCI + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC bridge + device pci 1f.2 on end # SATA Controller + device pci 1f.3 on end # SMBus + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/google/slippy/variants/falco/gma.c b/src/mainboard/google/slippy/variants/falco/gma.c new file mode 100644 index 0000000000..19f467c8de --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/gma.c @@ -0,0 +1,246 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <types.h> +#include <string.h> +#include <stdlib.h> +#include <device/device.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <delay.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <smbios.h> +#include <device/pci.h> +#include <ec/google/chromeec/ec.h> + +#include <cpu/x86/tsc.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/msr.h> +#include <edid.h> +#include <drivers/intel/gma/i915.h> +#include <northbridge/intel/haswell/haswell.h> +#include <variant/mainboard.h> + +/* + * Here is the rough outline of how we bring up the display: + * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD + * 2. Source determines video mode by reading DPCD receiver capability field + * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD + * 0000Dh). + * 3. Sink replies DPCD receiver capability field. + * 4. Source starts EDID read thru I2C-over-AUX. + * 5. Sink replies EDID thru I2C-over-AUX. + * 6. Source determines link configuration, such as MAX_LINK_RATE and + * MAX_LANE_COUNT. Source also determines which type of eDP Authentication + * method to use and writes DPCD link configuration field (DPCD 00100h to + * 0010Ah) including eDP configuration set (DPCD 0010Ah). + * 7. Source starts link training. Sink does clock recovery and equalization. + * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh). + * 9. Sink replies DPCD link status field. If main link is not stable, Source + * repeats Step 7. + * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video + * parameters and recovers stream clock. + * 11. Source sends video data. + */ + +/* how many bytes do we need for the framebuffer? + * Well, this gets messy. To get an exact answer, we have + * to ask the panel, but we'd rather zero the memory + * and set up the gtt while the panel powers up. So, + * we take a reasonable guess, secure in the knowledge that the + * MRC has to overestimate the number of bytes used. + * 8 MiB is a very safe guess. There may be a better way later, but + * fact is, the initial framebuffer is only very temporary. And taking + * a little long is ok; this is done much faster than the AUX + * channel is ready for IO. + */ +#define FRAME_BUFFER_BYTES (8*MiB) +/* how many 4096-byte pages do we need for the framebuffer? + * There are hard ways to get this, and easy ways: + * there are FRAME_BUFFER_BYTES/4096 pages, since pages are 4096 + * on this chip (and in fact every Intel graphics chip we've seen). + */ +#define FRAME_BUFFER_PAGES (FRAME_BUFFER_BYTES/(4096)) + +static int i915_init_done = 0; + +/* fill the palette. */ +static void palette(void) +{ + int i; + unsigned long color = 0; + + for(i = 0; i < 256; i++, color += 0x010101){ + gtt_write(_LGC_PALETTE_A + (i << 2),color); + } +} + +void mainboard_train_link(struct intel_dp *intel_dp) +{ + u8 read_val; + u8 link_status[DP_LINK_STATUS_SIZE]; + + gtt_write(DP_TP_CTL(intel_dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE); + gtt_write(DP_A, DP_PORT_EN | DP_LINK_TRAIN_PAT_1 | DP_LINK_TRAIN_PAT_1_CPT | DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0 | DP_PORT_WIDTH_1 | DP_PLL_FREQ_270MHZ | DP_SYNC_VS_HIGH |0x80000011); + + intel_dp_get_training_pattern(intel_dp, &read_val); + intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_1 | DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH); + intel_dp_get_lane_count(intel_dp, &read_val); + intel_dp_set_training_lane0(intel_dp, DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0); + intel_dp_get_link_status(intel_dp, link_status); + + gtt_write(DP_TP_CTL(intel_dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_LINK_TRAIN_PAT2); + + intel_dp_get_training_pattern(intel_dp, &read_val); + intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_2 | DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH); + intel_dp_get_link_status(intel_dp, link_status); + intel_dp_get_lane_align_status(intel_dp, &read_val); + intel_dp_get_training_pattern(intel_dp, &read_val); + intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_DISABLE | DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH); +} + +#define TEST_GFX 0 + +#if TEST_GFX +static void test_gfx(struct intel_dp *dp) +{ + int i; + + /* This is a sanity test code which fills the screen with two bands -- + green and blue. It is very useful to ensure all the initializations + are made right. Thus, to be used only for testing, not otherwise + */ + for (i = 0; i < (dp->edid.va - 4); i++) { + u32 *l; + int j; + u32 tcolor = 0x0ff; + for (j = 0; j < (dp->edid.ha-4); j++) { + if (j == (dp->edid.ha/2)) { + tcolor = 0xff00; + } + l = (u32*)(graphics + i * dp->stride + j * sizeof(tcolor)); + memcpy(l,&tcolor,sizeof(tcolor)); + } + } +} +#else +static void test_gfx(struct intel_dp *dp) {} +#endif + + +void mainboard_set_port_clk_dp(struct intel_dp *intel_dp) +{ + u32 ddi_pll_sel = 0; + + switch (intel_dp->link_bw) { + case DP_LINK_BW_1_62: + ddi_pll_sel = PORT_CLK_SEL_LCPLL_810; + break; + case DP_LINK_BW_2_7: + ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350; + break; + case DP_LINK_BW_5_4: + ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700; + break; + default: + printk(BIOS_ERR, "invalid link bw %d\n", intel_dp->link_bw); + return; + } + + gtt_write(PORT_CLK_SEL(intel_dp->port), ddi_pll_sel); +} + +int panel_lightup(struct intel_dp *dp, unsigned int init_fb) +{ + int i; + int edid_ok; + int pixels = FRAME_BUFFER_BYTES/64; + + void runio(struct intel_dp *dp); + + dp->gen = 8; // This is gen 8 which we believe is Haswell + dp->is_haswell = 1; + dp->DP = 0x2; + /* These values are used for training the link */ + dp->lane_count = 2; + dp->link_bw = DP_LINK_BW_2_7; + dp->pipe = PIPE_A; + dp->port = PORT_A; + dp->plane = PLANE_A; + dp->clock = 160000; + dp->pipe_bits_per_pixel = 32; + dp->type = INTEL_OUTPUT_EDP; + dp->output_reg = DP_A; + /* observed from YABEL. */ + dp->aux_clock_divider = 0xe1; + dp->precharge = 3; + + /* 1. Normal mode: Set the first page to zero and make + all GTT entries point to the same page + 2. Developer/Recovery mode: We do not zero out all + the pages pointed to by GTT in order to avoid wasting time */ + if (init_fb){ + set_translation_table(0, FRAME_BUFFER_PAGES, dp->physbase, 4096); + memset((void *)dp->graphics, 0x55, FRAME_BUFFER_PAGES*4096); + } else { + set_translation_table(0, FRAME_BUFFER_PAGES, dp->physbase, 0); + memset((void*)dp->graphics, 0, 4096); + } + + dp->address = 0x50; + + if ( !intel_dp_get_dpcd(dp) ) + goto fail; + + intel_dp_i2c_aux_ch(dp, MODE_I2C_WRITE, 0, NULL); + for(dp->edidlen = i = 0; i < sizeof(dp->rawedid); i++){ + if (intel_dp_i2c_aux_ch(dp, MODE_I2C_READ, + 0x50, &dp->rawedid[i]) < 0) + break; + dp->edidlen++; + } + + edid_ok = decode_edid(dp->rawedid, dp->edidlen, &dp->edid); + printk(BIOS_SPEW, "decode edid returns %d\n", edid_ok); + + compute_display_params(dp); + + intel_ddi_set_pipe_settings(dp); + + runio(dp); + + palette(); + + pixels = dp->edid.mode.ha * (dp->edid.mode.va-4) * 4; + printk(BIOS_SPEW, "ha=%d, va=%d\n",dp->edid.mode.ha, dp->edid.mode.va); + + test_gfx(dp); + + set_vbe_mode_info_valid(&dp->edid, (uintptr_t)dp->graphics); + i915_init_done = 1; + return i915_init_done; + +fail: + printk(BIOS_SPEW, "Graphics could not be started;"); + printk(BIOS_SPEW, "Returning.\n"); + return 0; +} diff --git a/src/mainboard/google/slippy/variants/falco/hda_verb.c b/src/mainboard/google/slippy/variants/falco/hda_verb.c new file mode 100644 index 0000000000..790d501576 --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/hda_verb.c @@ -0,0 +1,103 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0283, // Codec Vendor / Device ID: Realtek ALC283 + 0x10ec0283, // Subsystem ID + 0x0000000e, // Number of jacks (NID entries) + + 0x0017ff00, // Function Reset + 0x0017ff00, // Double Function Reset + 0x000F0000, // Pad - get vendor id + 0x000F0002, // Pad - get revision id + + /* NID 0x01, HDA Codec Subsystem ID Verb Table */ + AZALIA_SUBVENDOR(0x0, 0x11790670), + + /* Pin Widget Verb Table */ + + /* Pin Complex (NID 0x12) DMIC - interior mobile lid */ + AZALIA_PIN_CFG(0x0, 0x12, 0xb7a61010), + + /* Pin Complex (NID 0x14) SPKR-OUT PORTD */ + // group 1, front left/right + // no connector, no jack detect + // speaker out, analog + // fixed function, internal + AZALIA_PIN_CFG(0x0, 0x14, 0x90170110), + + /* Pin Complex (NID 0x17) MONO Out - Disabled */ + AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0), + + /* Pin Complex (NID 0x18) MIC1 PORTB - Disabled */ + AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0), + + /* Pin Complex (NID 0x19) MIC2 PORTF */ + // group 1, cap 1 + // black, jack detect + // mic in, analog + // connector, left panel + AZALIA_PIN_CFG(0x0, 0x19, 0x03a71011), + + /* Pin Complex (NID 0x1A) LINE1 PORTC - Disabled */ + AZALIA_PIN_CFG(0x0, 0x1a, 0x411111f0), + + /* Pin Complex (NID 0x1B) LINE2 PORTE - Disabled */ + AZALIA_PIN_CFG(0x0, 0x1a, 0x411111f0), + + /* Pin Complex (NID 0x1d) PCBeep */ + // eapd low on ex-amp, laptop, custom enable + // mute spkr on hpout + // pcbeep en able, checksum + // no physical, internal + AZALIA_PIN_CFG(0x0, 0x1d, 0x4015812d), + + /* Pin Complex (NID 0x1E) SPDIF-OUT - Disabled */ + AZALIA_PIN_CFG(0x0, 0x1e, 0x411111f0), + + /* Pin Complex (NID 0x21) HPOUT PORT-I */ + // group1, + // black, jack detect + // HPOut, 1/8 stereo + // connector, left panel + AZALIA_PIN_CFG(0x0, 0x21, 0x0321101f), + + /* Undocumented settings from Realtek (needed for beep_gen) */ + /* Widget node 0x20 */ + 0x02050010, + 0x02040c20, + 0x0205001b, + 0x0204081b, + + /* Tuned jack detection */ + 0x02050043, + 0x0204A614, + 0x02050047, + 0x02049470, +}; + +const u32 pc_beep_verbs[] = { + 0x00170500, /* power up everything (codec, dac, adc, mixers) */ + 0x01470740, /* enable speaker out */ + 0x01470c02, /* set speaker EAPD pin */ + 0x0143b01f, /* unmute speaker */ + 0x00c37100, /* unmute mixer nid 0xc input 1 */ + 0x00b37410, /* unmute mixer nid 0xb beep input and set volume */ +}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/google/slippy/variants/falco/i915io.c b/src/mainboard/google/slippy/variants/falco/i915io.c new file mode 100644 index 0000000000..d51cb43c52 --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/i915io.c @@ -0,0 +1,125 @@ +/* +* This file is part of the coreboot project. +* +* Copyright 2013 Google Inc. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; version 2 of the License. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +/* This code was originally generated using an i915tool program. It has been + * improved by hand. + */ + +#include <stdint.h> +#include <console/console.h> +#include <delay.h> +#include <drivers/intel/gma/i915.h> +#include <arch/io.h> +#include <variant/mainboard.h> + +/* this function will either be renamed or subsumed into ./gma.c:i915_lightup */ +void runio(struct intel_dp *dp); + +void runio(struct intel_dp *dp) +{ + u8 read_val; + + intel_dp_wait_panel_power_control(0xabcd0008); + + /* vbios spins at this point. Some haswell weirdness? */ + intel_dp_wait_panel_power_control(0xabcd0008); + + /* This should be a function like intel_panel_enable_backlight + However, we are not sure how the value 0x3a9 comes up. + It has to do something with PWM frequency */ + gtt_write(BLC_PWM_CPU_CTL,0x03a903a9); + gtt_write(BLC_PWM_PCH_CTL2,0x03a903a9); + gtt_write(BLC_PWM_PCH_CTL1,BLM_PCH_PWM_ENABLE); + + gtt_write(DEIIR,0x00008000); + intel_dp_wait_reg(DEIIR, 0x00000000); + + gtt_write(DSPSTRIDE(dp->plane),dp->stride); + + intel_dp_sink_dpms(dp, 0); + + intel_dp_get_max_downspread(dp, &read_val); + + intel_dp_set_m_n_regs(dp); + + intel_dp_set_resolution(dp); + + gtt_write(PIPESRC(dp->pipe),dp->pipesrc); + gtt_write(PIPECONF(dp->transcoder),0x00000000); + gtt_write(PCH_TRANSCONF(dp->pipe),0x00000000); + + mainboard_set_port_clk_dp(dp); + gtt_write(DSPSTRIDE(dp->plane),dp->stride); + gtt_write(DSPCNTR(dp->plane),DISPLAY_PLANE_ENABLE|DISPPLANE_BGRX888); + gtt_write(DEIIR,0x00000080); + + gtt_write(TRANS_DDI_FUNC_CTL_EDP,dp->flags); + gtt_write(PIPECONF(dp->transcoder),PIPECONF_ENABLE|PIPECONF_DITHER_EN); + + intel_dp_wait_panel_power_control(0xabcd000a); + + /* what is this doing? Not sure yet. */ + intel_dp_i2c_write(dp, 0x0); + intel_dp_i2c_read(dp, &read_val); + intel_dp_i2c_write(dp, 0x04); + intel_dp_i2c_read(dp, &read_val); + intel_dp_i2c_write(dp, 0x7e); + intel_dp_i2c_read(dp, &read_val); + + /* this needs to be a call to a function */ + gtt_write(DP_A, DP_LINK_TRAIN_PAT_1 | DP_LINK_TRAIN_PAT_1_CPT | DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0 | DP_PORT_WIDTH_1 | DP_PLL_FREQ_270MHZ | DP_SCRAMBLING_DISABLE_IRONLAKE | DP_SYNC_VS_HIGH |0x00000091); + gtt_write(DP_TP_CTL(dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE); + gtt_write(DP_A, DP_PORT_EN | DP_LINK_TRAIN_PAT_1 | DP_LINK_TRAIN_PAT_1_CPT | DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0 | DP_PORT_WIDTH_1 | DP_ENHANCED_FRAMING | DP_PLL_FREQ_270MHZ | DP_SCRAMBLING_DISABLE_IRONLAKE | DP_SYNC_VS_HIGH |0x80040091); + + /* we may need to move these *after* power well power up and *before* PCH_PP_CONTROL in gma.c */ + gtt_write(PCH_PP_ON_DELAYS, PANEL_PORT_SELECT_LVDS |(/* PANEL_POWER_UP_DELAY_MASK */0x1 << 16)|(/* PANEL_LIGHT_ON_DELAY_MASK */0xa << 0)|0x0001000a); + gtt_write(PCH_PP_ON_DELAYS, PANEL_PORT_SELECT_LVDS |(/* PANEL_POWER_UP_DELAY_MASK */0x7d0 << 16)|(/* PANEL_LIGHT_ON_DELAY_MASK */0xa << 0)|0x07d0000a); + + intel_dp_set_bw(dp); + intel_dp_set_lane_count(dp); + + mainboard_train_link(dp); + + /* need a function: intel_ddi_set_tp or similar */ + gtt_write(DP_TP_CTL(dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_LINK_TRAIN_IDLE); + gtt_write(DP_TP_CTL(dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_LINK_TRAIN_NORMAL); + + gtt_write(BLC_PWM_CPU_CTL,0x03a903a9); + gtt_write(BLC_PWM_PCH_CTL2,0x03a903a9); + gtt_write(BLC_PWM_PCH_CTL1,0x80000000); + + /* some of this is not needed. */ + gtt_write(DIGITAL_PORT_HOTPLUG_CNTRL, DIGITAL_PORTA_HOTPLUG_ENABLE ); + + gtt_write(SDEIIR,0x00000000); + gtt_write(DEIIR,0x00000000); + gtt_write(DEIIR,0x00008000); + intel_dp_wait_reg(DEIIR, 0x00000000); + + gtt_write(DSPSTRIDE(dp->plane),dp->stride); + gtt_write(PIPESRC(dp->pipe),dp->pipesrc); + + gtt_write(DEIIR,0x00000080); + intel_dp_wait_reg(DEIIR, 0x00000000); + + gtt_write(DSPSTRIDE(dp->plane),dp->stride); + gtt_write(DSPCNTR(dp->plane),DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888); + + gtt_write(PCH_PP_CONTROL,EDP_BLC_ENABLE | PANEL_POWER_RESET | PANEL_POWER_ON); + + gtt_write(SDEIIR,0x00000000); + gtt_write(SDEIIR,0x00000000); + gtt_write(DEIIR,0x00000000); +} diff --git a/src/mainboard/google/slippy/variants/falco/include/variant/acpi/mainboard.asl b/src/mainboard/google/slippy/variants/falco/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000000..417dbfee94 --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/include/variant/acpi/mainboard.asl @@ -0,0 +1,84 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <onboard.h> + +Scope (\_SB) +{ + Device (LID0) + { + Name(_HID, EisaId("PNP0C0D")) + Method(_LID, 0) + { + Store (\_SB.PCI0.LPCB.EC0.LIDS, \LIDS) + Return (\LIDS) + } + } + + Device (PWRB) + { + Name(_HID, EisaId("PNP0C0C")) + } +} + +Scope (\_SB.PCI0.I2C0) +{ + Device (CTPA) + { + Name (_HID, "CYAP0000") + Name (_DDN, "Cypress Touchpad") + Name (_UID, 3) + Name (ISTP, 1) // Touchpad + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + 0x67, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C0" // ResourceSource + ) + Interrupt (ResourceConsumer, Edge, ActiveLow) + { + BOARD_TRACKPAD_IRQ + } + }) + + Method (_STA) + { + If (LEqual (\S1EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + + Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 }) + + Method (_DSW, 3, NotSerialized) + { + Store (BOARD_TRACKPAD_WAKE_GPIO, Local0) + If (LEqual (Arg0, 1)) { + // Enable GPIO as wake source + \_SB.PCI0.LPCB.GWAK (Local0) + } + } + + // Allow device to power off in S0 + Name (_S0W, 4) + } +} diff --git a/src/mainboard/google/slippy/variants/falco/include/variant/gpio.h b/src/mainboard/google/slippy/variants/falco/include/variant/gpio.h new file mode 100644 index 0000000000..c35b81eea4 --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/include/variant/gpio.h @@ -0,0 +1,120 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef FALCO_GPIO_H +#define FALCO_GPIO_H + +struct pch_lp_gpio_map; + +const struct pch_lp_gpio_map mainboard_gpio_map[] = { + LP_GPIO_UNUSED, /* 0: UNUSED */ + LP_GPIO_UNUSED, /* 1: UNUSED */ + LP_GPIO_UNUSED, /* 2: UNUSED */ + LP_GPIO_UNUSED, /* 3: UNUSED */ + LP_GPIO_NATIVE, /* 4: NATIVE: I2C0_SDA_GPIO4 */ + LP_GPIO_NATIVE, /* 5: NATIVE: I2C0_SCL_GPIO5 */ + LP_GPIO_NATIVE, /* 6: NATIVE: I2C1_SDA_GPIO6 */ + LP_GPIO_NATIVE, /* 7: NATIVE: I2C1_SCL_GPIO7 */ + LP_GPIO_ACPI_SCI, /* 8: LTE_WAKE_L_Q */ + LP_GPIO_INPUT, /* 9: RAM_ID1 */ + LP_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */ + LP_GPIO_UNUSED, /* 11: UNUSED */ + LP_GPIO_INPUT_INVERT, /* 12: TRACKPAD_INT_L (WAKE) */ + LP_GPIO_INPUT, /* 13: RAM_ID0 */ + LP_GPIO_INPUT, /* 14: EC_IN_RW */ + LP_GPIO_UNUSED, /* 15: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 16: UNUSED */ + LP_GPIO_UNUSED, /* 17: UNUSED */ + LP_GPIO_NATIVE, /* 18: PCIE_CLKREQ_WLAN# */ + LP_GPIO_UNUSED, /* 19: UNUSED */ + LP_GPIO_UNUSED, /* 20: UNUSED */ + LP_GPIO_UNUSED, /* 21: UNUSED */ + LP_GPIO_UNUSED, /* 22: UNUSED */ + LP_GPIO_UNUSED, /* 23: UNUSED */ + LP_GPIO_UNUSED, /* 24: UNUSED */ + LP_GPIO_INPUT_INVERT, /* 25: TOUCH_INT_L (WAKE) */ + LP_GPIO_UNUSED, /* 26: UNUSED */ + LP_GPIO_UNUSED, /* 27: UNUSED */ + LP_GPIO_UNUSED, /* 28: UNUSED */ + LP_GPIO_UNUSED, /* 29: UNUSED */ + LP_GPIO_NATIVE, /* 30: NATIVE: PCH_SUSWARN_L */ + LP_GPIO_NATIVE, /* 31: NATIVE: ACPRESENT */ + LP_GPIO_NATIVE, /* 32: NATIVE: LPC_CLKRUN_L */ + LP_GPIO_NATIVE, /* 33: NATIVE: DEVSLP0 */ + LP_GPIO_ACPI_SMI, /* 34: EC_SMI_L */ + LP_GPIO_ACPI_SMI, /* 35: PCH_NMI_DBG_L (route in NMI_EN) */ + LP_GPIO_ACPI_SCI, /* 36: EC_SCI_L */ + LP_GPIO_UNUSED, /* 37: UNUSED */ + LP_GPIO_UNUSED, /* 38: UNUSED */ + LP_GPIO_UNUSED, /* 39: UNUSED */ + LP_GPIO_NATIVE, /* 40: NATIVE: USB_OC0# */ + LP_GPIO_UNUSED, /* 41: UNUSED */ + LP_GPIO_UNUSED, /* 42: UNUSED */ + LP_GPIO_NATIVE, /* 43: NATIVE: USB_OC3# */ + LP_GPIO_UNUSED, /* 44: UNUSED */ + LP_GPIO_UNUSED, /* 45: UNUSED */ + LP_GPIO_OUT_HIGH, /* 46: WLAN_DISABLE_L */ + LP_GPIO_INPUT, /* 47: RAM_ID2 */ + LP_GPIO_UNUSED, /* 48: UNUSED */ + LP_GPIO_UNUSED, /* 49: UNUSED */ + LP_GPIO_UNUSED, /* 50: UNUSED */ + LP_GPIO_INPUT, /* 51: ALS_INT_L */ + LP_GPIO_INPUT, /* 52: SIM_DET */ + LP_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX (PIRQV) */ + LP_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX (PIRQW) */ + LP_GPIO_UNUSED, /* 55: UNUSED */ + LP_GPIO_UNUSED, /* 56: UNUSED */ + LP_GPIO_UNUSED, /* 57: UNUSED */ + LP_GPIO_INPUT, /* 58: PCH_SPI_WP_D */ + LP_GPIO_OUT_HIGH, /* 59: LTE_DISABLE_L */ + LP_GPIO_NATIVE, /* 60: NATIVE: SML0ALERT */ + LP_GPIO_UNUSED, /* 61: UNUSED */ + LP_GPIO_UNUSED, /* 62: UNUSED */ + LP_GPIO_NATIVE, /* 63: NATIVE: PCH_SLP_S5_L */ + LP_GPIO_UNUSED, /* 64: UNUSED */ + LP_GPIO_UNUSED, /* 65: UNUSED */ + LP_GPIO_UNUSED, /* 66: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 67: UNUSED */ + LP_GPIO_UNUSED, /* 68: UNUSED */ + LP_GPIO_UNUSED, /* 69: UNUSED */ + LP_GPIO_UNUSED, /* 70: UNUSED */ + LP_GPIO_NATIVE, /* 71: NATIVE: MODPHY_EN */ + LP_GPIO_UNUSED, /* 72: UNUSED */ + LP_GPIO_UNUSED, /* 73: UNUSED */ + LP_GPIO_NATIVE, /* 74: NATIVE: SMB_ME1_DAT */ + LP_GPIO_NATIVE, /* 75: NATIVE: SMB_ME1_CLK */ + LP_GPIO_UNUSED, /* 76: UNUSED */ + LP_GPIO_UNUSED, /* 77: UNUSED */ + LP_GPIO_UNUSED, /* 78: UNUSED */ + LP_GPIO_UNUSED, /* 79: UNUSED */ + LP_GPIO_UNUSED, /* 80: UNUSED */ + LP_GPIO_NATIVE, /* 81: NATIVE: SPKR */ + LP_GPIO_NATIVE, /* 82: NATIVE: EC_RCIN_L */ + LP_GPIO_UNUSED, /* 83: UNUSED */ + LP_GPIO_UNUSED, /* 84: UNUSED */ + LP_GPIO_UNUSED, /* 85: UNUSED */ + LP_GPIO_UNUSED, /* 86: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 87: UNUSED */ + LP_GPIO_UNUSED, /* 88: UNUSED */ + LP_GPIO_UNUSED, /* 89: UNUSED */ + LP_GPIO_UNUSED, /* 90: UNUSED */ + LP_GPIO_UNUSED, /* 91: UNUSED */ + LP_GPIO_UNUSED, /* 92: UNUSED */ + LP_GPIO_UNUSED, /* 93: UNUSED */ + LP_GPIO_UNUSED, /* 94: UNUSED */ + LP_GPIO_END +}; + +#endif diff --git a/src/mainboard/google/slippy/variants/falco/include/variant/mainboard.h b/src/mainboard/google/slippy/variants/falco/include/variant/mainboard.h new file mode 100644 index 0000000000..6329a27805 --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/include/variant/mainboard.h @@ -0,0 +1,21 @@ +/* +* This file is part of the coreboot project. +* +* Copyright 2013 Google Inc. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; version 2 of the License. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#ifndef __MAINBOARD_H_ +#define __MAINBOARD_H_ +void mainboard_train_link(struct intel_dp *intel_dp); +void mainboard_set_port_clk_dp(struct intel_dp *intel_dp); + +#endif diff --git a/src/mainboard/google/slippy/variants/falco/romstage.c b/src/mainboard/google/slippy/variants/falco/romstage.c new file mode 100644 index 0000000000..8254bc2df1 --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/romstage.c @@ -0,0 +1,175 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <cbfs.h> +#include <console/console.h> +#include <cpu/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/raminit.h> +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/lynxpoint/lp_gpio.h> +#include <variant/gpio.h> +#include "../../variant.h" + +const struct rcba_config_instruction rcba_config[] = { + + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP PCIE INTA -> PIRQA + * D29IP_E1P EHCI INTA -> PIRQD + * D20IP_XHCI XHCI INTA -> PIRQC (MSI) + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), + RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)), + RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP)), + RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)), + RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)), + RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)), + RCBA_SET_REG_32(D20IP, (INTA << D20IP_XHCI)), + + /* Device interrupt route registers */ + RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),/* LPC */ + RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),/* EHCI */ + RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),/* PCIE */ + RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),/* HDA */ + RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),/* ME */ + RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),/* SIO */ + RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),/* XHCI */ + RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),/* SDIO */ + + /* Disable unused devices (board specific) */ + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +}; + +/* Copy SPD data for on-board memory */ +static void copy_spd(struct pei_data *peid) +{ + const int gpio_vector[] = {13, 9, 47, -1}; + int spd_index = get_gpios(gpio_vector); + char *spd_file; + size_t spd_file_len; + + printk(BIOS_DEBUG, "SPD index %d\n", spd_index); + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (!spd_file) + die("SPD data not found."); + + if (spd_file_len < + ((spd_index + 1) * sizeof(peid->spd_data[0]))) { + printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n"); + spd_index = 0; + } + + if (spd_file_len < sizeof(peid->spd_data[0])) + die("Missing SPD data."); + + /* Index 0-2,6 are 4GB config with both CH0 and CH1 + * Index 3-5,7 are 2GB config with CH0 only + */ + switch (spd_index) { + case 3: case 4: case 5: case 7: + peid->dimm_channel1_disabled = 3; + } + + memcpy(peid->spd_data[0], + spd_file + + spd_index * sizeof(peid->spd_data[0]), + sizeof(peid->spd_data[0])); +} + +void variant_romstage_entry(unsigned long bist) +{ + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = (uintptr_t)DEFAULT_MCHBAR, + .dmibar = (uintptr_t)DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = DEFAULT_PCIEXBAR, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = HPET_ADDR, + .rcba = (uintptr_t)DEFAULT_RCBA, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .temp_mmio_base = 0xfed08000, + .system_type = 5, /* ULT */ + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, + .ec_present = 1, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + .dimm_channel0_disabled = 2, + .dimm_channel1_disabled = 2, + // Enable 2x refresh mode + .ddr_refresh_2x = 1, + .max_ddr3_freq = 1600, + .usb_xhci_on_resume = 1, + .usb2_ports = { + /* Length, Enable, OCn#, Location */ + { 0x0064, 1, 0, /* P0: Port A, CN8 */ + USB_PORT_BACK_PANEL }, + { 0x0052, 1, 0, /* P1: Port B, CN9 */ + USB_PORT_BACK_PANEL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P2: CCD */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: LTE */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P5: TOUCH */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SD Card */ + USB_PORT_INTERNAL }, + { 0x0123, 1, 3, /* P7: USB2 Port */ + USB_PORT_INTERNAL }, + }, + .usb3_ports = { + /* Enable, OCn# */ + { 1, 0 }, /* P1; Port A, CN8 */ + { 1, 0 }, /* P2; Port B, CN9 */ + { 0, USB_OC_PIN_SKIP }, /* P3; */ + { 0, USB_OC_PIN_SKIP }, /* P4; */ + }, + }; + + struct romstage_params romstage_params = { + .pei_data = &pei_data, + .gpio_map = &mainboard_gpio_map, + .rcba_config = &rcba_config[0], + .bist = bist, + .copy_spd = copy_spd, + }; + + /* Call into the real romstage main with this board's attributes. */ + romstage_common(&romstage_params); +} diff --git a/src/mainboard/google/slippy/variants/falco/spd/Elpida_EDJ4216EFBG.spd.hex b/src/mainboard/google/slippy/variants/falco/spd/Elpida_EDJ4216EFBG.spd.hex new file mode 100644 index 0000000000..eb41f0bfb1 --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/spd/Elpida_EDJ4216EFBG.spd.hex @@ -0,0 +1,17 @@ +# Elpida EDJ4216EFBG-GN-F +92 12 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 81 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 02 FE 00 00 00 00 00 00 00 A1 CE +45 44 4A 34 32 31 36 45 46 42 47 2D 47 4E 2D 46 +00 00 00 00 02 FE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/slippy/variants/falco/spd/Hynix_HMT425S6AFR6A.spd.hex b/src/mainboard/google/slippy/variants/falco/spd/Hynix_HMT425S6AFR6A.spd.hex new file mode 100644 index 0000000000..7b0932743d --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/spd/Hynix_HMT425S6AFR6A.spd.hex @@ -0,0 +1,17 @@ +# Hynix HMT425S6AFR6A-PBA +92 12 0B 03 04 19 02 02 03 52 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 11 62 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 01 00 00 00 00 00 00 FF AB +48 4D 54 34 32 35 53 36 41 46 52 36 41 2D 50 42 +20 20 4E 30 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/slippy/variants/falco/spd/Micron_4KTF25664HZ.spd.hex b/src/mainboard/google/slippy/variants/falco/spd/Micron_4KTF25664HZ.spd.hex new file mode 100644 index 0000000000..cbe9e4fbfe --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/spd/Micron_4KTF25664HZ.spd.hex @@ -0,0 +1,17 @@ +# Micron 4KTF25664HZ-1G6E1 +92 11 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 05 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2C 00 00 00 00 00 00 00 AD 75 +34 4B 54 46 32 35 36 36 34 48 5A 2D 31 47 36 45 +31 20 45 31 80 2C 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/slippy/variants/falco/spd/Samsung_M471B5674QH0.spd.hex b/src/mainboard/google/slippy/variants/falco/spd/Samsung_M471B5674QH0.spd.hex new file mode 100644 index 0000000000..c2a23cdebf --- /dev/null +++ b/src/mainboard/google/slippy/variants/falco/spd/Samsung_M471B5674QH0.spd.hex @@ -0,0 +1,17 @@ +# Samsung M471B5674QH0-YK0 (K4B4G1646Q) +92 12 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 00 88 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 11 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 00 00 00 00 00 00 6C F9 +4D 34 37 31 42 35 36 37 34 51 48 30 2D 59 4B 30 +20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/slippy/variants/leon/Makefile.inc b/src/mainboard/google/slippy/variants/leon/Makefile.inc new file mode 100644 index 0000000000..5d8d9d3d6f --- /dev/null +++ b/src/mainboard/google/slippy/variants/leon/Makefile.inc @@ -0,0 +1,40 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +## DIMM SPD for on-board memory +SPD_BIN = $(obj)/spd.bin + +# Order of names in SPD_SOURCES is important! +SPD_SOURCES = Micron_4KTF25664HZ # 0: 4GB / CH0 + CH1 +SPD_SOURCES += Hynix_HMT425S6AFR6A # 1: 4GB / CH0 + CH1 +SPD_SOURCES += Samsung_K4B4G1646Q # 2: 4GB / CH0 + Ch1 +SPD_SOURCES += Micron_4KTF25664HZ # 3: space holder +SPD_SOURCES += Micron_4KTF25664HZ # 4: space holder +SPD_SOURCES += Hynix_HMT425S6AFR6A # 5: 2GB / CH0 +SPD_SOURCES += Samsung_K4B4G1646Q # 6: 2GB / CH0 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/slippy/variants/leon/devicetree.cb b/src/mainboard/google/slippy/variants/leon/devicetree.cb new file mode 100644 index 0000000000..b0edb7fa2d --- /dev/null +++ b/src/mainboard/google/slippy/variants/leon/devicetree.cb @@ -0,0 +1,157 @@ +chip northbridge/intel/haswell + # IGD Displays + register "gfx.ndid" = "3" + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" + + # Enable eDP Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Disable DisplayPort C Hotplug + register "gpu_dp_c_hotplug" = "0x00" + + # Enable HDMI Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + # Set backlight PWM values for eDP + register "gpu_cpu_backlight" = "0x00000200" + register "gpu_pch_backlight" = "0x04000000" + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "5" # 400ms + register "gpu_panel_power_up_delay" = "400" # 40ms + register "gpu_panel_power_down_delay" = "150" # 15ms + register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms + register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms + + device cpu_cluster 0 on + chip cpu/intel/haswell + device lapic 0 on end + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S) + + register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + device pci 03.0 on end # mini-hd audio + + chip southbridge/intel/lynxpoint + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # EC range is 0x800-0x9ff + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x00fc0901" + + # EC_SMI is GPIO34 + register "alt_gp_smi_en" = "0x0004" + register "gpe0_en_1" = "0x00000000" + # EC_SCI is GPIO36 + register "gpe0_en_2" = "0x00000010" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" + + register "ide_legacy_combined" = "0x0" + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x1" + register "sata_devslp_disable" = "0x1" + + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" + + register "sio_acpi_mode" = "1" + register "sio_i2c0_voltage" = "0" # 3.3V + register "sio_i2c1_voltage" = "0" # 3.3V + + # Force enable ASPM for PCIe Port 1 + register "pcie_port_force_aspm" = "0x01" + + # Route all USB ports to XHCI per default + register "xhci_default" = "1" + + # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP + register "icc_clock_disable" = "0x013c0000" + + device pci 13.0 off end # Smart Sound Audio DSP + device pci 14.0 on end # USB3 XHCI + device pci 15.0 on end # Serial I/O DMA + device pci 15.1 on end # I2C0 + device pci 15.2 on end # I2C1 + device pci 15.3 off end # GSPI0 + device pci 15.4 off end # GSPI1 + device pci 15.5 off end # UART0 + device pci 15.6 off end # UART1 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 17.0 off end # SDIO + device pci 19.0 off end # GbE + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1d.0 on end # USB2 EHCI + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC bridge + device pci 1f.2 on end # SATA Controller + device pci 1f.3 on # SMBus + chip drivers/i2c/rtd2132 + # Panel Power Timings (1 ms units) + # Note: the panel Tx timings are very + # different from the LVDS bridge + # Tx timing settings. Below is a mapping + # for RTD2132 -> Panel timings. + # T1 = T2 + # T2 = T8 + T10 + T12 + # T3 = T14 + # T4 = T15 + # T5 = T9 + T11 + T13 + # T6 = T3 + # T7 = T4 + register "t1" = "0x14" + register "t2" = "0xdc" + register "t3" = "0x0e" + register "t4" = "0x02" + register "t5" = "0xdc" + register "t6" = "0x14" + register "t7" = "0x208" + # LVDS Swap settings are normal. + register "lvds_swap" = "0" + # Enable Spread Sprectrum at 0.5% + register "sscg_percent" = "0x05" + device i2c 35 on end # (8bit address: 0x6A) + end # rtd2132 + end # SMBus + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/google/slippy/variants/leon/hda_verb.c b/src/mainboard/google/slippy/variants/leon/hda_verb.c new file mode 100644 index 0000000000..39a5c78e83 --- /dev/null +++ b/src/mainboard/google/slippy/variants/leon/hda_verb.c @@ -0,0 +1,103 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0283, // Codec Vendor / Device ID: Realtek ALC283 + 0x10ec0283, // Subsystem ID + 0x0000000e, // Number of jacks (NID entries) + + 0x0017ff00, // Function Reset + 0x0017ff00, // Double Function Reset + 0x000F0000, // Pad - get vendor id + 0x000F0002, // Pad - get revision id + + /* NID 0x01, HDA Codec Subsystem ID Verb Table */ + AZALIA_SUBVENDOR(0x0, 0x11790670), + + /* Pin Widget Verb Table */ + + /* Pin Complex (NID 0x12) DMIC - Internal Mic */ + AZALIA_PIN_CFG(0x0, 0x12, 0xb7a61010), + + /* Pin Complex (NID 0x14) SPKR-OUT - Internal Speakers */ + // group 1, cap 0 + // no connector, no jack detect + // speaker out, analog + // fixed function, internal + AZALIA_PIN_CFG(0x0, 0x14, 0x90170110), + + /* Pin Complex (NID 0x17) MONO Out - Disabled */ + AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0), + + /* Pin Complex (NID 0x18) MIC1 PORTB - Disabled */ + AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0), + + /* Pin Complex (NID 0x19) MIC2 - 3.5mm Jack */ + // group2, cap 0 + // black, jack detect + // Mic in, 3.5mm Jack + // connector, External left panel + AZALIA_PIN_CFG(0x0, 0x19, 0x03a11020), + + /* Pin Complex (NID 0x1A) LINE1 - Disabled */ + AZALIA_PIN_CFG(0x0, 0x1a, 0x411111f0), + + /* Pin Complex (NID 0x1B) LINE2 - Disabled */ + AZALIA_PIN_CFG(0x0, 0x1b, 0x411111f0), + + /* Pin Complex (NID 0x1D) PCBeep */ + // eapd low on ex-amp, laptop, custom enable + // mute spkr on hpout + // pcbeep en able, checksum + // no physical, Internal, Location N/A + AZALIA_PIN_CFG(0x0, 0x1d, 0x4015812d), + + /* Pin Complex (NID 0x1E) SPDIF-OUT - Disabled*/ + AZALIA_PIN_CFG(0x0, 0x1e, 0x411111f0), + + /* Pin Complex (NID 0x21) HP-OUT - 3.5mm Jack*/ + // group2, cap 1 + // black, jack detect + // HPOut, 3.5mm Jack + // connector, left panel + AZALIA_PIN_CFG(0x0, 0x21, 0x03211021), + + /* Undocumented settings from Realtek (needed for beep_gen) */ + /* Widget node 0x20 */ + 0x02050010, + 0x02040c20, + 0x0205001b, + 0x0204081b, + + /* Tuned jack detection */ + 0x02050043, + 0x0204A614, + 0x02050047, + 0x02049470, +}; + +const u32 pc_beep_verbs[] = { + 0x00170500, /* power up everything (codec, dac, adc, mixers) */ + 0x01470740, /* enable speaker out */ + 0x01470c02, /* set speaker EAPD pin */ + 0x0143b01f, /* unmute speaker */ + 0x00c37100, /* unmute mixer nid 0xc input 1 */ + 0x00b37410, /* unmute mixer nid 0xb beep input and set volume */ +}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/google/slippy/variants/leon/include/variant/acpi/mainboard.asl b/src/mainboard/google/slippy/variants/leon/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000000..4afe310ca5 --- /dev/null +++ b/src/mainboard/google/slippy/variants/leon/include/variant/acpi/mainboard.asl @@ -0,0 +1,88 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <onboard.h> + +Scope (\_SB) +{ + Device (LID0) + { + Name(_HID, EisaId("PNP0C0D")) + Method(_LID, 0) + { + Store (\_SB.PCI0.LPCB.EC0.LIDS, \LIDS) + Return (\LIDS) + } + + // There is no GPIO for LID, the EC pulses WAKE# pin instead. + // There is no GPE for WAKE#, so fake it with PCI_EXP_WAKE + Name (_PRW, Package(){ 0x69, 5 }) // PCI_EXP + } + + Device (PWRB) + { + Name(_HID, EisaId("PNP0C0C")) + } +} + +Scope (\_SB.PCI0.I2C0) +{ + Device (CTPA) + { + Name (_HID, "CYAP0000") + Name (_DDN, "Cypress Touchpad") + Name (_UID, 3) + Name (ISTP, 1) /* Touchpad */ + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + 0x67, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C0" // ResourceSource + ) + Interrupt (ResourceConsumer, Edge, ActiveLow) + { + BOARD_TRACKPAD_IRQ + } + }) + + Method (_STA) + { + If (LEqual (\S1EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + + Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 }) + + Method (_DSW, 3, NotSerialized) + { + Store (BOARD_TRACKPAD_WAKE_GPIO, Local0) + If (LEqual (Arg0, 1)) { + // Enable GPIO as wake source + \_SB.PCI0.LPCB.GWAK (Local0) + } + } + + /* Allow device to power off in S0 */ + Name (_S0W, 4) + } +} diff --git a/src/mainboard/google/slippy/variants/leon/include/variant/gpio.h b/src/mainboard/google/slippy/variants/leon/include/variant/gpio.h new file mode 100644 index 0000000000..d8088992c7 --- /dev/null +++ b/src/mainboard/google/slippy/variants/leon/include/variant/gpio.h @@ -0,0 +1,120 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef LEON_GPIO_H +#define LEON_GPIO_H + +struct pch_lp_gpio_map; + +const struct pch_lp_gpio_map mainboard_gpio_map[] = { + LP_GPIO_UNUSED, /* 0: UNUSED */ + LP_GPIO_UNUSED, /* 1: UNUSED */ + LP_GPIO_UNUSED, /* 2: UNUSED */ + LP_GPIO_UNUSED, /* 3: UNUSED */ + LP_GPIO_NATIVE, /* 4: NATIVE: I2C0_SDA_GPIO4 */ + LP_GPIO_NATIVE, /* 5: NATIVE: I2C0_SCL_GPIO5 */ + LP_GPIO_NATIVE, /* 6: NATIVE: I2C1_SDA_GPIO6 */ + LP_GPIO_NATIVE, /* 7: NATIVE: I2C1_SCL_GPIO7 */ + LP_GPIO_ACPI_SCI, /* 8: LTE_WAKE_L_Q */ + LP_GPIO_INPUT, /* 9: RAM_ID1 */ + LP_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */ + LP_GPIO_UNUSED, /* 11: UNUSED */ + LP_GPIO_INPUT_INVERT, /* 12: TRACKPAD_INT_L (WAKE) */ + LP_GPIO_INPUT, /* 13: RAM_ID0 */ + LP_GPIO_INPUT, /* 14: EC_IN_RW */ + LP_GPIO_UNUSED, /* 15: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 16: UNUSED */ + LP_GPIO_UNUSED, /* 17: UNUSED */ + LP_GPIO_NATIVE, /* 18: PCIE_CLKREQ_WLAN# */ + LP_GPIO_UNUSED, /* 19: UNUSED */ + LP_GPIO_UNUSED, /* 20: UNUSED */ + LP_GPIO_UNUSED, /* 21: UNUSED */ + LP_GPIO_UNUSED, /* 22: UNUSED */ + LP_GPIO_UNUSED, /* 23: UNUSED */ + LP_GPIO_UNUSED, /* 24: UNUSED */ + LP_GPIO_INPUT_INVERT, /* 25: TOUCH_INT_L (WAKE) */ + LP_GPIO_UNUSED, /* 26: UNUSED */ + LP_GPIO_UNUSED, /* 27: UNUSED */ + LP_GPIO_UNUSED, /* 28: UNUSED */ + LP_GPIO_UNUSED, /* 29: UNUSED */ + LP_GPIO_NATIVE, /* 30: NATIVE: PCH_SUSWARN_L */ + LP_GPIO_NATIVE, /* 31: NATIVE: ACPRESENT */ + LP_GPIO_NATIVE, /* 32: NATIVE: LPC_CLKRUN_L */ + LP_GPIO_NATIVE, /* 33: NATIVE: DEVSLP0 */ + LP_GPIO_ACPI_SMI, /* 34: EC_SMI_L */ + LP_GPIO_ACPI_SMI, /* 35: PCH_NMI_DBG_L (route in NMI_EN) */ + LP_GPIO_ACPI_SCI, /* 36: EC_SCI_L */ + LP_GPIO_UNUSED, /* 37: UNUSED */ + LP_GPIO_UNUSED, /* 38: UNUSED */ + LP_GPIO_UNUSED, /* 39: UNUSED */ + LP_GPIO_NATIVE, /* 40: NATIVE: USB_OC0# */ + LP_GPIO_UNUSED, /* 41: UNUSED */ + LP_GPIO_NATIVE, /* 42: NATIVE: USB_OC2# */ + LP_GPIO_UNUSED, /* 43: UNUSED */ + LP_GPIO_OUT_HIGH, /* 44: PP3300_SSD_EN */ + LP_GPIO_OUT_HIGH, /* 45: PP3300_CODEC_EN */ + LP_GPIO_OUT_HIGH, /* 46: WLAN_DISABLE_L */ + LP_GPIO_INPUT, /* 47: RAM_ID2 */ + LP_GPIO_UNUSED, /* 48: UNUSED */ + LP_GPIO_UNUSED, /* 49: UNUSED */ + LP_GPIO_UNUSED, /* 50: UNUSED */ + LP_GPIO_UNUSED, /* 51: ALS_INT_L */ + LP_GPIO_INPUT, /* 52: SIM_DET */ + LP_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX */ + LP_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX */ + LP_GPIO_UNUSED, /* 55: UNUSED */ + LP_GPIO_UNUSED, /* 56: UNUSED */ + LP_GPIO_OUT_HIGH, /* 57: PP3300_CCD_EN */ + LP_GPIO_INPUT, /* 58: PCH_SPI_WP_D */ + LP_GPIO_OUT_HIGH, /* 59: LTE_DISABLE_L */ + LP_GPIO_NATIVE, /* 60: NATIVE: SML0ALERT */ + LP_GPIO_UNUSED, /* 61: UNUSED */ + LP_GPIO_UNUSED, /* 62: UNUSED */ + LP_GPIO_NATIVE, /* 63: NATIVE: PCH_SLP_S5_L */ + LP_GPIO_UNUSED, /* 64: UNUSED */ + LP_GPIO_UNUSED, /* 65: UNUSED */ + LP_GPIO_UNUSED, /* 66: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 67: UNUSED */ + LP_GPIO_UNUSED, /* 68: UNUSED */ + LP_GPIO_UNUSED, /* 69: UNUSED */ + LP_GPIO_UNUSED, /* 70: UNUSED */ + LP_GPIO_NATIVE, /* 71: NATIVE: MODPHY_EN */ + LP_GPIO_NATIVE, /* 72: NATIVE: PCH_BATLOW# */ + LP_GPIO_NATIVE, /* 73: NATIVE: SMB1ALERT# */ + LP_GPIO_NATIVE, /* 74: NATIVE: SMB_ME1_DAT */ + LP_GPIO_NATIVE, /* 75: NATIVE: SMB_ME1_CLK */ + LP_GPIO_UNUSED, /* 76: UNUSED */ + LP_GPIO_UNUSED, /* 77: UNUSED */ + LP_GPIO_UNUSED, /* 78: UNUSED */ + LP_GPIO_UNUSED, /* 79: UNUSED */ + LP_GPIO_UNUSED, /* 80: UNUSED */ + LP_GPIO_NATIVE, /* 81: NATIVE: SPKR */ + LP_GPIO_NATIVE, /* 82: NATIVE: EC_RCIN_L */ + LP_GPIO_UNUSED, /* 83: UNUSED */ + LP_GPIO_UNUSED, /* 84: UNUSED */ + LP_GPIO_UNUSED, /* 85: UNUSED */ + LP_GPIO_UNUSED, /* 86: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 87: UNUSED */ + LP_GPIO_UNUSED, /* 88: UNUSED */ + LP_GPIO_UNUSED, /* 89: UNUSED */ + LP_GPIO_UNUSED, /* 90: UNUSED */ + LP_GPIO_UNUSED, /* 91: UNUSED */ + LP_GPIO_UNUSED, /* 92: UNUSED */ + LP_GPIO_UNUSED, /* 93: UNUSED */ + LP_GPIO_UNUSED, /* 94: UNUSED */ + LP_GPIO_END +}; + +#endif
\ No newline at end of file diff --git a/src/mainboard/google/slippy/variants/leon/romstage.c b/src/mainboard/google/slippy/variants/leon/romstage.c new file mode 100644 index 0000000000..c9cf07be3a --- /dev/null +++ b/src/mainboard/google/slippy/variants/leon/romstage.c @@ -0,0 +1,171 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <cbfs.h> +#include <console/console.h> +#include <cpu/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/raminit.h> +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/lynxpoint/lp_gpio.h> +#include <variant/gpio.h> +#include "../../variant.h" + +const struct rcba_config_instruction rcba_config[] = { + + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP PCIE INTA -> PIRQA + * D29IP_E1P EHCI INTA -> PIRQD + * D20IP_XHCI XHCI INTA -> PIRQC (MSI) + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), + RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)), + RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP)), + RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)), + RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)), + RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)), + RCBA_SET_REG_32(D20IP, (INTA << D20IP_XHCI)), + + /* Device interrupt route registers */ + RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),/* LPC */ + RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),/* EHCI */ + RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),/* PCIE */ + RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),/* HDA */ + RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),/* ME */ + RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),/* SIO */ + RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),/* XHCI */ + RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),/* SDIO */ + + /* Disable unused devices (board specific) */ + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +}; + +/* Copy SPD data for on-board memory */ +static void copy_spd(struct pei_data *peid) +{ + const int gpio_vector[] = {13, 9, 47, -1}; + int spd_index = get_gpios(gpio_vector); + char *spd_file; + size_t spd_file_len; + + printk(BIOS_DEBUG, "SPD index %d\n", spd_index); + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (!spd_file) + die("SPD data not found."); + + /* Limiting to a single dimm for 2GB configuration + * Identified by bit 3 + */ + if (spd_index & 0x4) + peid->dimm_channel1_disabled = 3; + + if (spd_file_len < + ((spd_index + 1) * sizeof(peid->spd_data[0]))) { + printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n"); + spd_index = 0; + } + + if (spd_file_len < sizeof(peid->spd_data[0])) + die("Missing SPD data."); + + memcpy(peid->spd_data[0], + spd_file + + spd_index * sizeof(peid->spd_data[0]), + sizeof(peid->spd_data[0])); +} + +void variant_romstage_entry(unsigned long bist) +{ + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = (uintptr_t)DEFAULT_MCHBAR, + .dmibar = (uintptr_t)DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = DEFAULT_PCIEXBAR, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = HPET_ADDR, + .rcba = (uintptr_t)DEFAULT_RCBA, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .temp_mmio_base = 0xfed08000, + .system_type = 5, /* ULT */ + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, + .ec_present = 1, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + .dimm_channel0_disabled = 2, + .dimm_channel1_disabled = 2, + .max_ddr3_freq = 1600, + .usb_xhci_on_resume = 1, + .usb2_ports = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, /* P0: Port A, CN10 */ + USB_PORT_BACK_PANEL }, + { 0x0040, 1, 2, /* P1: Port B, CN11 */ + USB_PORT_BACK_PANEL }, + { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ + USB_PORT_MINI_PCIE }, + { 0x0080, 1, USB_OC_PIN_SKIP, /* P4: SD Card */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P5: LTE */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SIM CARD */ + USB_PORT_FLEX }, + { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */ + USB_PORT_SKIP }, + }, + .usb3_ports = { + /* Enable, OCn# */ + { 1, 0 }, /* P1; Port A, CN10 */ + { 1, 2 }, /* P2; Port B, CN11 */ + { 0, USB_OC_PIN_SKIP }, /* P3; */ + { 0, USB_OC_PIN_SKIP }, /* P4; */ + }, + }; + + struct romstage_params romstage_params = { + .pei_data = &pei_data, + .gpio_map = &mainboard_gpio_map, + .rcba_config = &rcba_config[0], + .bist = bist, + .copy_spd = copy_spd, + }; + + /* Call into the real romstage main with this board's attributes. */ + romstage_common(&romstage_params); +} diff --git a/src/mainboard/google/slippy/variants/leon/spd/Hynix_HMT425S6AFR6A.spd.hex b/src/mainboard/google/slippy/variants/leon/spd/Hynix_HMT425S6AFR6A.spd.hex new file mode 100644 index 0000000000..7b0932743d --- /dev/null +++ b/src/mainboard/google/slippy/variants/leon/spd/Hynix_HMT425S6AFR6A.spd.hex @@ -0,0 +1,17 @@ +# Hynix HMT425S6AFR6A-PBA +92 12 0B 03 04 19 02 02 03 52 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 11 62 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 01 00 00 00 00 00 00 FF AB +48 4D 54 34 32 35 53 36 41 46 52 36 41 2D 50 42 +20 20 4E 30 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/slippy/variants/leon/spd/Micron_4KTF25664HZ.spd.hex b/src/mainboard/google/slippy/variants/leon/spd/Micron_4KTF25664HZ.spd.hex new file mode 100644 index 0000000000..cbe9e4fbfe --- /dev/null +++ b/src/mainboard/google/slippy/variants/leon/spd/Micron_4KTF25664HZ.spd.hex @@ -0,0 +1,17 @@ +# Micron 4KTF25664HZ-1G6E1 +92 11 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 05 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2C 00 00 00 00 00 00 00 AD 75 +34 4B 54 46 32 35 36 36 34 48 5A 2D 31 47 36 45 +31 20 45 31 80 2C 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/slippy/variants/leon/spd/Samsung_K4B4G1646Q.spd.hex b/src/mainboard/google/slippy/variants/leon/spd/Samsung_K4B4G1646Q.spd.hex new file mode 100644 index 0000000000..d6b0770334 --- /dev/null +++ b/src/mainboard/google/slippy/variants/leon/spd/Samsung_K4B4G1646Q.spd.hex @@ -0,0 +1,17 @@ +# Samsung K4B4G1646Q-HYK0 +92 12 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 05 +00 00 00 00 00 00 00 00 88 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 00 00 00 00 00 00 6C F9 +4D 34 37 31 42 35 36 37 34 51 48 30 2D 59 4B 30 +20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
\ No newline at end of file diff --git a/src/mainboard/google/slippy/variants/peppy/Makefile.inc b/src/mainboard/google/slippy/variants/peppy/Makefile.inc new file mode 100644 index 0000000000..576af04a1b --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/Makefile.inc @@ -0,0 +1,42 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += gma.c i915io.c + +## DIMM SPD for on-board memory +SPD_BIN = $(obj)/spd.bin + +# Order of names in SPD_SOURCES is important! +SPD_SOURCES = Micron_4KTF25664HZ # 0: 4GB / CH0 + CH1 +SPD_SOURCES += Hynix_HMT425S6AFR6A # 1: 4GB / CH0 + CH1 +SPD_SOURCES += Elpida_EDJ4216EFBG # 2: 4GB / CH0 + CH1 +SPD_SOURCES += Micron_4KTF25664HZ # 3: Reserved / place holder +SPD_SOURCES += Micron_4KTF25664HZ # 4: 2GB / CH0 + CH1 +SPD_SOURCES += Hynix_HMT425S6AFR6A # 5: 2GB / CH0 + CH1 +SPD_SOURCES += Elpida_EDJ4216EFBG # 6: 2GB / CH0 + CH1 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/slippy/variants/peppy/devicetree.cb b/src/mainboard/google/slippy/variants/peppy/devicetree.cb new file mode 100644 index 0000000000..e9875a66e7 --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/devicetree.cb @@ -0,0 +1,129 @@ +chip northbridge/intel/haswell + # IGD Displays + register "gfx.ndid" = "3" + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" + + # Enable eDP Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Disable DisplayPort C Hotplug + register "gpu_dp_c_hotplug" = "0x00" + + # Enable HDMI Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + # Set backlight PWM values for eDP + register "gpu_cpu_backlight" = "0x00000200" + register "gpu_pch_backlight" = "0x04000000" + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "5" # 400ms + register "gpu_panel_power_up_delay" = "400" # 40ms + register "gpu_panel_power_down_delay" = "150" # 15ms + register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms + register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms + + device cpu_cluster 0 on + chip cpu/intel/haswell + device lapic 0 on end + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S) + + register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + device pci 03.0 on end # mini-hd audio + + chip southbridge/intel/lynxpoint + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # EC range is 0x800-0x9ff + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x00fc0901" + + # EC_SMI is GPIO34 + register "alt_gp_smi_en" = "0x0004" + register "gpe0_en_1" = "0x00000000" + # EC_SCI is GPIO36 + register "gpe0_en_2" = "0x00000010" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" + + register "ide_legacy_combined" = "0x0" + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x1" + + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" + + register "sio_acpi_mode" = "1" + register "sio_i2c0_voltage" = "0" # 3.3V + register "sio_i2c1_voltage" = "0" # 3.3V + + # Force enable ASPM for PCIe Port1 + register "pcie_port_force_aspm" = "0x01" + + # Route all USB ports to XHCI per default + register "xhci_default" = "1" + + # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP + register "icc_clock_disable" = "0x013c0000" + + device pci 13.0 off end # Smart Sound Audio DSP + device pci 14.0 on end # USB3 XHCI + device pci 15.0 on end # Serial I/O DMA + device pci 15.1 on end # I2C0 + device pci 15.2 on end # I2C1 + device pci 15.3 off end # GSPI0 + device pci 15.4 off end # GSPI1 + device pci 15.5 off end # UART0 + device pci 15.6 off end # UART1 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 17.0 off end # SDIO + device pci 19.0 off end # GbE + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1d.0 on end # USB2 EHCI + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC bridge + device pci 1f.2 on end # SATA Controller + device pci 1f.3 on end # SMBus + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/google/slippy/variants/peppy/gma.c b/src/mainboard/google/slippy/variants/peppy/gma.c new file mode 100644 index 0000000000..afdb4d6b31 --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/gma.c @@ -0,0 +1,272 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <types.h> +#include <string.h> +#include <stdlib.h> +#include <device/device.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <delay.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <smbios.h> +#include <device/pci.h> +#include <ec/google/chromeec/ec.h> + +#include <cpu/x86/tsc.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/msr.h> +#include <edid.h> +#include <drivers/intel/gma/i915.h> +#include <northbridge/intel/haswell/haswell.h> +#include <variant/mainboard.h> + +/* + * Here is the rough outline of how we bring up the display: + * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD + * 2. Source determines video mode by reading DPCD receiver capability field + * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD + * 0000Dh). + * 3. Sink replies DPCD receiver capability field. + * 4. Source starts EDID read thru I2C-over-AUX. + * 5. Sink replies EDID thru I2C-over-AUX. + * 6. Source determines link configuration, such as MAX_LINK_RATE and + * MAX_LANE_COUNT. Source also determines which type of eDP Authentication + * method to use and writes DPCD link configuration field (DPCD 00100h to + * 0010Ah) including eDP configuration set (DPCD 0010Ah). + * 7. Source starts link training. Sink does clock recovery and equalization. + * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh). + * 9. Sink replies DPCD link status field. If main link is not stable, Source + * repeats Step 7. + * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video + * parameters and recovers stream clock. + * 11. Source sends video data. + */ + +/* how many bytes do we need for the framebuffer? + * Well, this gets messy. To get an exact answer, we have + * to ask the panel, but we'd rather zero the memory + * and set up the gtt while the panel powers up. So, + * we take a reasonable guess, secure in the knowledge that the + * MRC has to overestimate the number of bytes used. + * 8 MiB is a very safe guess. There may be a better way later, but + * fact is, the initial framebuffer is only very temporary. And taking + * a little long is ok; this is done much faster than the AUX + * channel is ready for IO. + */ +#define FRAME_BUFFER_BYTES (8*MiB) +/* how many 4096-byte pages do we need for the framebuffer? + * There are hard ways to get this, and easy ways: + * there are FRAME_BUFFER_BYTES/4096 pages, since pages are 4096 + * on this chip (and in fact every Intel graphics chip we've seen). + */ +#define FRAME_BUFFER_PAGES (FRAME_BUFFER_BYTES/(4096)) + + +static int i915_init_done = 0; + +/* fill the palette. */ +static void palette(void) +{ + int i; + unsigned long color = 0; + + for(i = 0; i < 256; i++, color += 0x010101){ + gtt_write(_LGC_PALETTE_A + (i << 2),color); + } +} + +void mainboard_train_link(struct intel_dp *intel_dp) +{ + u8 read_val; + u8 link_status[DP_LINK_STATUS_SIZE]; + + gtt_write(DP_TP_CTL(intel_dp->port), + DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE); + gtt_write(DDI_BUF_CTL_A, + DDI_BUF_CTL_ENABLE| + DDI_A_4_LANES|DDI_PORT_WIDTH_X1|DDI_INIT_DISPLAY_DETECTED|0x80000011); + + intel_dp_get_training_pattern(intel_dp, &read_val); + intel_dp_set_training_pattern(intel_dp, + DP_TRAINING_PATTERN_1 | DP_LINK_QUAL_PATTERN_DISABLE | + DP_SYMBOL_ERROR_COUNT_BOTH); + + intel_dp_set_training_lane0(intel_dp, + DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0); + intel_dp_get_link_status(intel_dp, link_status); + + gtt_write(DP_TP_CTL(intel_dp->port), + DP_TP_CTL_ENABLE | + DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_LINK_TRAIN_PAT2); + + intel_dp_get_training_pattern(intel_dp, &read_val); + intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_2 | + DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH); + intel_dp_get_link_status(intel_dp, link_status); + intel_dp_get_lane_align_status(intel_dp, &read_val); + intel_dp_get_training_pattern(intel_dp, &read_val); + intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_DISABLE | + DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH); +} + +/* This variable controls whether the test_gfx function below puts up + * color bars or not. In previous revs we ifdef'd the test_gfx function out + * but it's handy, especially when using a JTAG debugger + * to be able to enable and disable a test graphics. + */ +int show_test = 0; + +static void test_gfx(struct intel_dp *dp) +{ + int i; + + if (!show_test) + return; + /* This is a sanity test code which fills the screen with two bands -- + green and blue. It is very useful to ensure all the initializations + are made right. Thus, to be used only for testing, not otherwise + */ + + for (i = 0; i < (dp->edid.mode.va - 4); i++) { + u32 *l; + int j; + u32 tcolor = 0x0ff; + for (j = 0; j < (dp->edid.mode.ha-4); j++) { + if (j == (dp->edid.mode.ha/2)) { + tcolor = 0xff00; + } + l = (u32*)(dp->graphics + i * dp->stride + j * sizeof(tcolor)); + memcpy(l,&tcolor,sizeof(tcolor)); + } + } + printk(BIOS_SPEW, "sleep 10\n"); + delay(10); +} + +void mainboard_set_port_clk_dp(struct intel_dp *intel_dp) +{ + u32 ddi_pll_sel = 0; + + switch (intel_dp->link_bw) { + case DP_LINK_BW_1_62: + ddi_pll_sel = PORT_CLK_SEL_LCPLL_810; + break; + case DP_LINK_BW_2_7: + ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350; + break; + case DP_LINK_BW_5_4: + ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700; + break; + default: + printk(BIOS_ERR, "invalid link bw %d\n", intel_dp->link_bw); + return; + } + + gtt_write(PORT_CLK_SEL(intel_dp->port), ddi_pll_sel); +} + +int panel_lightup(struct intel_dp *dp, unsigned int init_fb) +{ + int i; + int edid_ok; + int pixels = FRAME_BUFFER_BYTES/64; + + gtt_write(PCH_PP_CONTROL,0xabcd000f); + delay(1); + + void runio(struct intel_dp *dp); + /* hard codes -- stuff you can only know from the mainboard */ + dp->gen = 8; // This is gen 8 which we believe is Haswell + dp->is_haswell = 1; + dp->DP = 0x2; + dp->pipe = PIPE_A; + dp->port = PORT_A; + dp->plane = PLANE_A; + dp->pipe_bits_per_pixel = 24; + dp->type = INTEL_OUTPUT_EDP; + dp->output_reg = DP_A; + /* observed from YABEL. */ + dp->aux_clock_divider = 0xe1; + dp->precharge = 3; + + /* 1. Normal mode: Set the first page to zero and make + all GTT entries point to the same page + 2. Developer/Recovery mode: Set up a tasteful color + so people know we are alive. */ + if (init_fb || show_test) { + set_translation_table(0, FRAME_BUFFER_PAGES, dp->physbase, + 4096); + memset((void *)dp->graphics, 0x55, FRAME_BUFFER_PAGES*4096); + } else { + set_translation_table(0, FRAME_BUFFER_PAGES, dp->physbase, 0); + memset((void*)dp->graphics, 0, 4096); + } + + dp->address = 0x50; + + if ( !intel_dp_get_dpcd(dp) ) + goto fail; + + intel_dp_i2c_aux_ch(dp, MODE_I2C_WRITE, 0, NULL); + for(dp->edidlen = i = 0; i < sizeof(dp->rawedid); i++){ + if (intel_dp_i2c_aux_ch(dp, MODE_I2C_READ, + 0x50, &dp->rawedid[i]) < 0) + break; + dp->edidlen++; + } + + edid_ok = decode_edid(dp->rawedid, dp->edidlen, &dp->edid); + + printk(BIOS_SPEW, "decode edid returns %d\n", edid_ok); + + compute_display_params(dp); + + printk(BIOS_SPEW, "pixel_clock is %i, link_clock is %i\n", + dp->edid.mode.pixel_clock, dp->edid.link_clock); + + intel_ddi_set_pipe_settings(dp); + + runio(dp); + + palette(); + + pixels = dp->edid.mode.ha * (dp->edid.mode.va-4) * 4; + printk(BIOS_SPEW, "ha=%d, va=%d\n",dp->edid.mode.ha, dp->edid.mode.va); + test_gfx(dp); + + set_vbe_mode_info_valid(&dp->edid, (uintptr_t)dp->graphics); + i915_init_done = 1; + return 1; + +fail: + printk(BIOS_SPEW, "Graphics could not be started;"); + /* unclear we will *ever* want to do this. */ + if (0){ + printk(BIOS_SPEW, "Turn off power and wait ..."); + gtt_write(PCH_PP_CONTROL,0xabcd0000); + udelay(600000); + gtt_write(PCH_PP_CONTROL,0xabcd000f); + } + printk(BIOS_SPEW, "Returning.\n"); + return 0; +} diff --git a/src/mainboard/google/slippy/variants/peppy/hda_verb.c b/src/mainboard/google/slippy/variants/peppy/hda_verb.c new file mode 100644 index 0000000000..a5ec9bb2a6 --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/hda_verb.c @@ -0,0 +1,107 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0283, // Codec Vendor / Device ID: Realtek ALC283 + 0x10ec0283, // Subsystem ID + 0x0000000e, // Number of jacks (NID entries) + + 0x0017ff00, // Function Reset + 0x0017ff00, // Double Function Reset + 0x000F0000, // Pad - get vendor id + 0x000F0002, // Pad - get revision id + + /* NID 0x01, HDA Codec Subsystem ID Verb Table */ + AZALIA_SUBVENDOR(0x0, 0x11790670), + + /* Pin Widget Verb Table */ + + /* Pin Complex (NID 0x12) DMIC - Disabled */ + AZALIA_PIN_CFG(0x0, 0x12, 0x411111f0), + + /* Pin Complex (NID 0x14) SPKR-OUT - Internal Speakers */ + // group 1, cap 0 + // no connector, no jack detect + // speaker out, analog + // fixed function, internal, Location N/A + AZALIA_PIN_CFG(0x0, 0x14, 0x90170110), + + /* Pin Complex (NID 0x17) MONO Out - Disabled */ + AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0), + + /* Pin Complex (NID 0x18) MIC1 PORTB - Disabled */ + AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0), + + /* Pin Complex (NID 0x19) MIC2 - 3.5mm Jack */ + // group2, cap 0 + // black, jack detect + // Mic in, 3.5mm Jack + // connector, External left panel + AZALIA_PIN_CFG(0x0, 0x19, 0x03a11020), + + /* Pin Complex (NID 0x1A) LINE1 - Internal Mic */ + // group 1, cap 1 + // no connector, no jack detect + // mic in, analog connection + // Fixed function, internal, Location N/A + AZALIA_PIN_CFG(0x0, 0x1a, 0x90a70111), + + /* Pin Complex (NID 0x1B) LINE2 - Disabled */ + AZALIA_PIN_CFG(0x0, 0x1b, 0x411111f0), + + /* Pin Complex (NID 0x1D) PCBeep */ + // eapd low on ex-amp, laptop, custom enable + // mute spkr on hpout + // pcbeep en able, checksum + // no physical, Internal, Location N/A + AZALIA_PIN_CFG(0x0, 0x1d, 0x4015812d), + + /* Pin Complex (NID 0x1E) SPDIF-OUT - Disabled*/ + AZALIA_PIN_CFG(0x0, 0x1e, 0x411111f0), + + /* Pin Complex (NID 0x21) HP-OUT - 3.5mm Jack*/ + // group2, cap 1 + // black, jack detect + // HPOut, 3.5mm Jack + // connector, left panel + AZALIA_PIN_CFG(0x0, 0x21, 0x03211021), + + /* Undocumented settings from Realtek (needed for beep_gen) */ + /* Widget node 0x20 */ + 0x02050010, + 0x02040c20, + 0x0205001b, + 0x0204081b, + + /* Tuned jack detection */ + 0x02050043, + 0x0204A614, + 0x02050047, + 0x02049470, +}; + +const u32 pc_beep_verbs[] = { + 0x00170500, /* power up everything (codec, dac, adc, mixers) */ + 0x01470740, /* enable speaker out */ + 0x01470c02, /* set speaker EAPD pin */ + 0x0143b01f, /* unmute speaker */ + 0x00c37100, /* unmute mixer nid 0xc input 1 */ + 0x00b37410, /* unmute mixer nid 0xb beep input and set volume */ +}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/google/slippy/variants/peppy/i915io.c b/src/mainboard/google/slippy/variants/peppy/i915io.c new file mode 100644 index 0000000000..6cf2d0ed27 --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/i915io.c @@ -0,0 +1,139 @@ +/* +* This file is part of the coreboot project. +* +* Copyright 2013 Google Inc. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; version 2 of the License. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#include <stdint.h> +#include <console/console.h> +#include <delay.h> +#include <drivers/intel/gma/i915.h> +#include <arch/io.h> +#include <variant/mainboard.h> + +void runio(struct intel_dp *dp, int verbose); +void runio(struct intel_dp *dp, int verbose) +{ + u8 read_val; + gtt_write(DDI_BUF_CTL_A, + DDI_BUF_IS_IDLE|DDI_A_4_LANES|DDI_PORT_WIDTH_X1|DDI_INIT_DISPLAY_DETECTED + |0x00000091); + + intel_prepare_ddi(); + + gtt_write(BLC_PWM_CPU_CTL,0x03a903a9); + gtt_write(BLC_PWM_PCH_CTL2,0x03a903a9); + gtt_write(BLC_PWM_PCH_CTL1,0x80000000); + + gtt_write(DEIIR,0x00008000); + intel_dp_wait_reg(DEIIR, 0x00000000); + gtt_write(DSPSTRIDE(dp->plane), dp->stride); + gtt_write(DSPADDR(dp->plane), 0x00000000); + + printk(BIOS_SPEW, "DP_SET_POWER"); + + intel_dp_sink_dpms(dp, 0); + + intel_dp_set_m_n_regs(dp); + + intel_dp_get_max_downspread(dp, &read_val); + + intel_dp_set_resolution(dp); + + gtt_write(PIPESRC(dp->pipe),dp->pipesrc); + gtt_write(PIPECONF(dp->transcoder),0x00000000); + gtt_write(PCH_TRANSCONF(dp->pipe),0x00000000); + + mainboard_set_port_clk_dp(dp); + + gtt_write(DSPSTRIDE(dp->plane),dp->stride); + gtt_write(DSPCNTR(dp->plane),DISPLAY_PLANE_ENABLE|DISPPLANE_BGRX888); + + gtt_write(DEIIR,0x00000080); + intel_dp_wait_reg(DEIIR, 0x00000000); + + /* There is some reason we removed these three calls from + * slippy/gma.c -- I dont remember why!! */ + gtt_write(PF_WIN_POS(dp->pipe),dp->pfa_pos); + gtt_write(PF_CTL(dp->pipe),dp->pfa_ctl); + gtt_write(PF_WIN_SZ(dp->pipe),dp->pfa_sz); + + gtt_write(TRANS_DDI_FUNC_CTL_EDP,dp->flags); + gtt_write(PIPECONF(dp->transcoder),PIPECONF_ENABLE|PIPECONF_DITHER_EN); + + /* what is this doing? Not sure yet. But we don't seem to be + * able to live without it.*/ + intel_dp_i2c_write(dp, 0x0); + intel_dp_i2c_read(dp, &read_val); + intel_dp_i2c_write(dp, 0x04); + intel_dp_i2c_read(dp, &read_val); + intel_dp_i2c_write(dp, 0x7e); + intel_dp_i2c_read(dp, &read_val); + + gtt_write(DDI_BUF_CTL_A, + DDI_BUF_IS_IDLE| + DDI_A_4_LANES|DDI_PORT_WIDTH_X1|DDI_INIT_DISPLAY_DETECTED + |0x00000091); + + gtt_write(TRANS_DDI_FUNC_CTL_EDP+0x10,0x00000001); + gtt_write(DP_TP_CTL(dp->port),DP_TP_CTL_ENABLE | + DP_TP_CTL_ENHANCED_FRAME_ENABLE); + + gtt_write(DDI_BUF_CTL_A, + DDI_BUF_CTL_ENABLE| + /* another undocumented setting. Surprised? */ 0x40000 | + DDI_BUF_IS_IDLE|DDI_A_4_LANES| + DDI_PORT_WIDTH_X1|DDI_INIT_DISPLAY_DETECTED| + 0x80040091); + + intel_dp_set_bw(dp); + + intel_dp_set_lane_count(dp); + + mainboard_train_link(dp); + + gtt_write(DP_TP_CTL(dp->port), + DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE | + DP_TP_CTL_LINK_TRAIN_IDLE); + + gtt_write(DP_TP_CTL(dp->port), + DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE | + DP_TP_CTL_LINK_TRAIN_NORMAL); + + gtt_write(BLC_PWM_CPU_CTL,0x03a903a9); + gtt_write(BLC_PWM_PCH_CTL2,0x03a903a9); + gtt_write(BLC_PWM_PCH_CTL1,0x80000000); + + /* some of this is not needed. But with a total lack of docs, well ...*/ + gtt_write(DIGITAL_PORT_HOTPLUG_CNTRL, DIGITAL_PORTA_HOTPLUG_ENABLE ); + + gtt_write(SDEIIR,0x00000000); + gtt_write(DEIIR,0x00000000); + gtt_write(DEIIR,0x00008000); + intel_dp_wait_reg(DEIIR, 0x00000000); + + gtt_write(DSPSTRIDE(dp->plane),dp->stride); + gtt_write(PIPESRC(dp->pipe),dp->pipesrc); + + gtt_write(DEIIR,0x00000080); + intel_dp_wait_reg(DEIIR, 0x00000000); + + gtt_write(DSPSTRIDE(dp->plane),dp->stride); + gtt_write(DSPCNTR(dp->plane),DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888); + + gtt_write(PCH_PP_CONTROL,EDP_BLC_ENABLE | EDP_BLC_ENABLE | PANEL_POWER_ON); + + gtt_write(SDEIIR,0x00000000); + gtt_write(SDEIIR,0x00000000); + gtt_write(DEIIR,0x00000000); + +} diff --git a/src/mainboard/google/slippy/variants/peppy/include/variant/acpi/mainboard.asl b/src/mainboard/google/slippy/variants/peppy/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000000..cc0c68846c --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/include/variant/acpi/mainboard.asl @@ -0,0 +1,172 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <onboard.h> + +Scope (\_SB) +{ + Device (LID0) + { + Name(_HID, EisaId("PNP0C0D")) + Method(_LID, 0) + { + Store (\_SB.PCI0.LPCB.EC0.LIDS, \LIDS) + Return (\LIDS) + } + } + + Device (PWRB) + { + Name(_HID, EisaId("PNP0C0C")) + } +} + +Scope (\_SB.PCI0.I2C0) +{ + Device (ETPA) + { + Name (_HID, "ELAN0000") + Name (_DDN, "Elan Touchpad") + Name (_UID, 1) + Name (ISTP, 1) // Touchpad + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + 0x15, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C0" // ResourceSource + ) + Interrupt (ResourceConsumer, Level, ActiveLow) + { + BOARD_TRACKPAD_IRQ + } + }) + + Method (_STA) + { + If (LEqual (\S1EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + + Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 }) + + Method (_DSW, 3, NotSerialized) + { + Store (BOARD_TRACKPAD_WAKE_GPIO, Local0) + If (LEqual (Arg0, 1)) { + // Enable GPIO as wake source + \_SB.PCI0.LPCB.GWAK (Local0) + } + } + } + Device (CTPA) + { + Name (_HID, "CYAP0000") + Name (_DDN, "Cypress Touchpad") + Name (_UID, 3) + Name (ISTP, 1) // Touchpad + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + 0x67, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C0" // ResourceSource + ) + Interrupt (ResourceConsumer, Edge, ActiveLow) + { + BOARD_TRACKPAD_IRQ + } + }) + + Method (_STA) + { + If (LEqual (\S1EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + + Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 }) + + Method (_DSW, 3, NotSerialized) + { + Store (BOARD_TRACKPAD_WAKE_GPIO, Local0) + If (LEqual (Arg0, 1)) { + // Enable GPIO as wake source + \_SB.PCI0.LPCB.GWAK (Local0) + } + } + + // Allow device to power off in S0 + Name (_S0W, 4) + } +} +Scope (\_SB.PCI0.I2C1) +{ + Device (ATSA) + { + Name (_HID, "ATML0001") + Name (_DDN, "Atmel Touchscreen") + Name (_UID, 5) + Name (_S0W, 4) + Name (ISTP, 0) /* TouchScreen */ + Name (GPIO, 25) + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + 0x4a, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C1" // ResourceSource + ) + + // GPIO54 (ball L3) is PIRQW: PIRQL_GSI + PIRQL - PIRQW = PIRQW_GSI + // 27 + 3 - 14 = 38 + Interrupt (ResourceConsumer, Edge, ActiveLow) { 38 } + }) + + Name (_PRW, Package() { BOARD_TOUCHSCREEN_WAKE_GPIO, 0x3 }) + + Method (_DSW, 3, NotSerialized) + { + Store (BOARD_TOUCHSCREEN_WAKE_GPIO, Local0) + If (LEqual (Arg0, 1)) { + // Enable GPIO as wake source + \_SB.PCI0.LPCB.GWAK (Local0) + } + } + + Method (_STA) + { + If (LEqual (\S2EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + } +}
\ No newline at end of file diff --git a/src/mainboard/google/slippy/variants/peppy/include/variant/gpio.h b/src/mainboard/google/slippy/variants/peppy/include/variant/gpio.h new file mode 100644 index 0000000000..8eb3da9d70 --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/include/variant/gpio.h @@ -0,0 +1,120 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef PEPPY_GPIO_H +#define PEPPY_GPIO_H + +struct pch_lp_gpio_map; + +const struct pch_lp_gpio_map mainboard_gpio_map[] = { + LP_GPIO_UNUSED, /* 0: UNUSED */ + LP_GPIO_UNUSED, /* 1: UNUSED */ + LP_GPIO_UNUSED, /* 2: UNUSED */ + LP_GPIO_UNUSED, /* 3: UNUSED */ + LP_GPIO_NATIVE, /* 4: NATIVE: I2C0_SDA_GPIO4 */ + LP_GPIO_NATIVE, /* 5: NATIVE: I2C0_SCL_GPIO5 */ + LP_GPIO_NATIVE, /* 6: NATIVE: I2C1_SDA_GPIO6 */ + LP_GPIO_NATIVE, /* 7: NATIVE: I2C1_SCL_GPIO7 */ + LP_GPIO_ACPI_SCI, /* 8: LTE_WAKE_L_Q */ + LP_GPIO_INPUT, /* 9: RAM_ID1 */ + LP_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */ + LP_GPIO_UNUSED, /* 11: UNUSED */ + LP_GPIO_INPUT_INVERT, /* 12: TRACKPAD_INT_L (WAKE) */ + LP_GPIO_INPUT, /* 13: RAM_ID0 */ + LP_GPIO_INPUT, /* 14: EC_IN_RW */ + LP_GPIO_UNUSED, /* 15: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 16: UNUSED */ + LP_GPIO_UNUSED, /* 17: UNUSED */ + LP_GPIO_NATIVE, /* 18: PCIE_CLKREQ_WLAN# */ + LP_GPIO_UNUSED, /* 19: UNUSED */ + LP_GPIO_UNUSED, /* 20: UNUSED */ + LP_GPIO_UNUSED, /* 21: UNUSED */ + LP_GPIO_UNUSED, /* 22: UNUSED */ + LP_GPIO_UNUSED, /* 23: UNUSED */ + LP_GPIO_UNUSED, /* 24: UNUSED */ + LP_GPIO_INPUT_INVERT, /* 25: TOUCH_INT_L (WAKE) */ + LP_GPIO_UNUSED, /* 26: UNUSED */ + LP_GPIO_UNUSED, /* 27: UNUSED */ + LP_GPIO_UNUSED, /* 28: UNUSED */ + LP_GPIO_UNUSED, /* 29: UNUSED */ + LP_GPIO_NATIVE, /* 30: NATIVE: PCH_SUSWARN_L */ + LP_GPIO_NATIVE, /* 31: NATIVE: ACPRESENT */ + LP_GPIO_NATIVE, /* 32: NATIVE: LPC_CLKRUN_L */ + LP_GPIO_NATIVE, /* 33: NATIVE: DEVSLP0 */ + LP_GPIO_ACPI_SMI, /* 34: EC_SMI_L */ + LP_GPIO_ACPI_SMI, /* 35: PCH_NMI_DBG_L (route in NMI_EN) */ + LP_GPIO_ACPI_SCI, /* 36: EC_SCI_L */ + LP_GPIO_UNUSED, /* 37: UNUSED */ + LP_GPIO_UNUSED, /* 38: UNUSED */ + LP_GPIO_UNUSED, /* 39: UNUSED */ + LP_GPIO_NATIVE, /* 40: NATIVE: USB_OC0# */ + LP_GPIO_UNUSED, /* 41: UNUSED */ + LP_GPIO_NATIVE, /* 42: NATIVE: USB_OC2# */ + LP_GPIO_UNUSED, /* 43: UNUSED */ + LP_GPIO_OUT_HIGH, /* 44: PP3300_SSD_EN */ + LP_GPIO_OUT_HIGH, /* 45: PP3300_CODEC_EN */ + LP_GPIO_OUT_HIGH, /* 46: WLAN_DISABLE_L */ + LP_GPIO_INPUT, /* 47: RAM_ID2 */ + LP_GPIO_UNUSED, /* 48: UNUSED */ + LP_GPIO_UNUSED, /* 49: UNUSED */ + LP_GPIO_UNUSED, /* 50: UNUSED */ + LP_GPIO_INPUT, /* 51: ALS_INT_L */ + LP_GPIO_INPUT, /* 52: SIM_DET */ + LP_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX */ + LP_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX */ + LP_GPIO_UNUSED, /* 55: UNUSED */ + LP_GPIO_UNUSED, /* 56: UNUSED */ + LP_GPIO_OUT_HIGH, /* 57: PP3300_CCD_EN */ + LP_GPIO_INPUT, /* 58: PCH_SPI_WP_D */ + LP_GPIO_OUT_HIGH, /* 59: LTE_DISABLE_L */ + LP_GPIO_NATIVE, /* 60: NATIVE: SML0ALERT */ + LP_GPIO_UNUSED, /* 61: UNUSED */ + LP_GPIO_UNUSED, /* 62: UNUSED */ + LP_GPIO_NATIVE, /* 63: NATIVE: PCH_SLP_S5_L */ + LP_GPIO_UNUSED, /* 64: UNUSED */ + LP_GPIO_UNUSED, /* 65: UNUSED */ + LP_GPIO_UNUSED, /* 66: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 67: UNUSED */ + LP_GPIO_UNUSED, /* 68: UNUSED */ + LP_GPIO_UNUSED, /* 69: UNUSED */ + LP_GPIO_UNUSED, /* 70: UNUSED */ + LP_GPIO_NATIVE, /* 71: NATIVE: MODPHY_EN */ + LP_GPIO_NATIVE, /* 72: NATIVE: PCH_BATLOW# */ + LP_GPIO_NATIVE, /* 73: NATIVE: SMB1ALERT# */ + LP_GPIO_NATIVE, /* 74: NATIVE: SMB_ME1_DAT */ + LP_GPIO_NATIVE, /* 75: NATIVE: SMB_ME1_CLK */ + LP_GPIO_UNUSED, /* 76: UNUSED */ + LP_GPIO_UNUSED, /* 77: UNUSED */ + LP_GPIO_UNUSED, /* 78: UNUSED */ + LP_GPIO_UNUSED, /* 79: UNUSED */ + LP_GPIO_UNUSED, /* 80: UNUSED */ + LP_GPIO_NATIVE, /* 81: NATIVE: SPKR */ + LP_GPIO_NATIVE, /* 82: NATIVE: EC_RCIN_L */ + LP_GPIO_UNUSED, /* 83: UNUSED */ + LP_GPIO_UNUSED, /* 84: UNUSED */ + LP_GPIO_UNUSED, /* 85: UNUSED */ + LP_GPIO_UNUSED, /* 86: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 87: UNUSED */ + LP_GPIO_UNUSED, /* 88: UNUSED */ + LP_GPIO_UNUSED, /* 89: UNUSED */ + LP_GPIO_UNUSED, /* 90: UNUSED */ + LP_GPIO_UNUSED, /* 91: UNUSED */ + LP_GPIO_UNUSED, /* 92: UNUSED */ + LP_GPIO_UNUSED, /* 93: UNUSED */ + LP_GPIO_UNUSED, /* 94: UNUSED */ + LP_GPIO_END +}; + +#endif diff --git a/src/mainboard/google/slippy/variants/peppy/include/variant/mainboard.h b/src/mainboard/google/slippy/variants/peppy/include/variant/mainboard.h new file mode 100644 index 0000000000..6329a27805 --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/include/variant/mainboard.h @@ -0,0 +1,21 @@ +/* +* This file is part of the coreboot project. +* +* Copyright 2013 Google Inc. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; version 2 of the License. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#ifndef __MAINBOARD_H_ +#define __MAINBOARD_H_ +void mainboard_train_link(struct intel_dp *intel_dp); +void mainboard_set_port_clk_dp(struct intel_dp *intel_dp); + +#endif diff --git a/src/mainboard/google/slippy/variants/peppy/romstage.c b/src/mainboard/google/slippy/variants/peppy/romstage.c new file mode 100644 index 0000000000..4a3910185d --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/romstage.c @@ -0,0 +1,184 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <delay.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <cbfs.h> +#include <console/console.h> +#include <cpu/intel/haswell/haswell.h> +#include "ec/google/chromeec/ec.h" +#include <northbridge/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/raminit.h> +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/lynxpoint/lp_gpio.h> +#include <variant/gpio.h> +#include "../../onboard.h" +#include "../../variant.h" + +const struct rcba_config_instruction rcba_config[] = { + + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP PCIE INTA -> PIRQA + * D29IP_E1P EHCI INTA -> PIRQD + * D20IP_XHCI XHCI INTA -> PIRQC (MSI) + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), + RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)), + RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP)), + RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)), + RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)), + RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)), + RCBA_SET_REG_32(D20IP, (INTA << D20IP_XHCI)), + + /* Device interrupt route registers */ + RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),/* LPC */ + RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),/* EHCI */ + RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),/* PCIE */ + RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),/* HDA */ + RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),/* ME */ + RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),/* SIO */ + RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),/* XHCI */ + RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),/* SDIO */ + + /* Disable unused devices (board specific) */ + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +}; + +/* Copy SPD data for on-board memory */ +static void copy_spd(struct pei_data *peid) +{ + const int gpio_vector[] = {13, 9, 47, -1}; + int spd_index = get_gpios(gpio_vector); + char *spd_file; + size_t spd_file_len; + + printk(BIOS_DEBUG, "SPD index %d\n", spd_index); + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (!spd_file) + die("SPD data not found."); + + switch (google_chromeec_get_board_version()) { + case PEPPY_BOARD_VERSION_PROTO: + /* Index 0 is 2GB config with CH0 only. */ + if (spd_index == 0) + peid->dimm_channel1_disabled = 3; + break; + + case PEPPY_BOARD_VERSION_EVT: + default: + /* Index 0-2 are 4GB config with both CH0 and CH1. + * Index 4-6 are 2GB config with CH0 only. */ + if (spd_index > 3) + peid->dimm_channel1_disabled = 3; + break; + } + + if (spd_file_len < + ((spd_index + 1) * sizeof(peid->spd_data[0]))) { + printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n"); + spd_index = 0; + } + + if (spd_file_len < sizeof(peid->spd_data[0])) + die("Missing SPD data."); + + memcpy(peid->spd_data[0], + spd_file + + spd_index * sizeof(peid->spd_data[0]), + sizeof(peid->spd_data[0])); +} + +void variant_romstage_entry(unsigned long bist) +{ + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = (uintptr_t)DEFAULT_MCHBAR, + .dmibar = (uintptr_t)DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = DEFAULT_PCIEXBAR, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = HPET_ADDR, + .rcba = (uintptr_t)DEFAULT_RCBA, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .temp_mmio_base = 0xfed08000, + .system_type = 5, /* ULT */ + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, + .ec_present = 1, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + .dimm_channel0_disabled = 2, + .dimm_channel1_disabled = 2, + .max_ddr3_freq = 1600, + .usb_xhci_on_resume = 1, + .usb2_ports = { + /* Length, Enable, OCn#, Location */ + { 0x0150, 1, USB_OC_PIN_SKIP, /* P0: LTE */ + USB_PORT_MINI_PCIE }, + { 0x0040, 1, 0, /* P1: Port A, CN10 */ + USB_PORT_BACK_PANEL }, + { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ + USB_PORT_MINI_PCIE }, + { 0x0040, 1, 2, /* P4: Port B, CN6 */ + USB_PORT_BACK_PANEL }, + { 0x0000, 0, USB_OC_PIN_SKIP, /* P5: EMPTY */ + USB_PORT_SKIP }, + { 0x0150, 1, USB_OC_PIN_SKIP, /* P6: SD Card */ + USB_PORT_FLEX }, + { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */ + USB_PORT_SKIP }, + }, + .usb3_ports = { + /* Enable, OCn# */ + { 1, 0 }, /* P1; Port A, CN6 */ + { 0, USB_OC_PIN_SKIP }, /* P2; */ + { 0, USB_OC_PIN_SKIP }, /* P3; */ + { 0, USB_OC_PIN_SKIP }, /* P4; */ + }, + }; + + struct romstage_params romstage_params = { + .pei_data = &pei_data, + .gpio_map = &mainboard_gpio_map, + .rcba_config = &rcba_config[0], + .bist = bist, + .copy_spd = copy_spd, + }; + + /* Call into the real romstage main with this board's attributes. */ + romstage_common(&romstage_params); +} diff --git a/src/mainboard/google/slippy/variants/peppy/spd/Elpida_EDJ4216EFBG.spd.hex b/src/mainboard/google/slippy/variants/peppy/spd/Elpida_EDJ4216EFBG.spd.hex new file mode 100644 index 0000000000..eb41f0bfb1 --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/spd/Elpida_EDJ4216EFBG.spd.hex @@ -0,0 +1,17 @@ +# Elpida EDJ4216EFBG-GN-F +92 12 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 81 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 02 FE 00 00 00 00 00 00 00 A1 CE +45 44 4A 34 32 31 36 45 46 42 47 2D 47 4E 2D 46 +00 00 00 00 02 FE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/slippy/variants/peppy/spd/Hynix_HMT425S6AFR6A.spd.hex b/src/mainboard/google/slippy/variants/peppy/spd/Hynix_HMT425S6AFR6A.spd.hex new file mode 100644 index 0000000000..7b0932743d --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/spd/Hynix_HMT425S6AFR6A.spd.hex @@ -0,0 +1,17 @@ +# Hynix HMT425S6AFR6A-PBA +92 12 0B 03 04 19 02 02 03 52 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 11 62 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 01 00 00 00 00 00 00 FF AB +48 4D 54 34 32 35 53 36 41 46 52 36 41 2D 50 42 +20 20 4E 30 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/slippy/variants/peppy/spd/Micron_4KTF25664HZ.spd.hex b/src/mainboard/google/slippy/variants/peppy/spd/Micron_4KTF25664HZ.spd.hex new file mode 100644 index 0000000000..cbe9e4fbfe --- /dev/null +++ b/src/mainboard/google/slippy/variants/peppy/spd/Micron_4KTF25664HZ.spd.hex @@ -0,0 +1,17 @@ +# Micron 4KTF25664HZ-1G6E1 +92 11 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 05 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2C 00 00 00 00 00 00 00 AD 75 +34 4B 54 46 32 35 36 36 34 48 5A 2D 31 47 36 45 +31 20 45 31 80 2C 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/slippy/variants/wolf/Makefile.inc b/src/mainboard/google/slippy/variants/wolf/Makefile.inc new file mode 100644 index 0000000000..0c860bfc80 --- /dev/null +++ b/src/mainboard/google/slippy/variants/wolf/Makefile.inc @@ -0,0 +1,39 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +## DIMM SPD for on-board memory +SPD_BIN = $(obj)/spd.bin + +# Order of names in SPD_SOURCES is important! +SPD_SOURCES = Micron_4KTF25664HZ # 0: 4GB / CH0 + CH1 +SPD_SOURCES += Hynix_HMT425S6AFR6A # 1: 4GB / CH0 + CH1 +SPD_SOURCES += Samsung_K4B4G1646B # 2: 4GB / CH0 + CH1 +SPD_SOURCES += Micron_4KTF25664HZ # 3: 2GB / CH0 +SPD_SOURCES += Hynix_HMT425S6AFR6A # 4: 2GB / CH0 +SPD_SOURCES += Samsung_K4B4G1646B # 4: 2GB / CH0 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/spd/$(f).spd.hex) + +# Include spd rom data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/google/slippy/variants/wolf/devicetree.cb b/src/mainboard/google/slippy/variants/wolf/devicetree.cb new file mode 100644 index 0000000000..7655c412a9 --- /dev/null +++ b/src/mainboard/google/slippy/variants/wolf/devicetree.cb @@ -0,0 +1,130 @@ +chip northbridge/intel/haswell + # IGD Displays + register "gfx.ndid" = "3" + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" + + # Enable eDP Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Disable DisplayPort C Hotplug + register "gpu_dp_c_hotplug" = "0x00" + + # Enable HDMI Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + # Set backlight PWM values for eDP + register "gpu_cpu_backlight" = "0x00000200" + register "gpu_pch_backlight" = "0x04000000" + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "6" # 500ms (T11+T12) + register "gpu_panel_power_up_delay" = "2000" # 200ms (T3) + register "gpu_panel_power_down_delay" = "500" # 50ms (T10) + register "gpu_panel_power_backlight_on_delay" = "10" # 1ms (T8) + register "gpu_panel_power_backlight_off_delay" = "2000" # 200ms (T9) + + device cpu_cluster 0 on + chip cpu/intel/haswell + device lapic 0 on end + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S) + + register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + device pci 03.0 on end # mini-hd audio + + chip southbridge/intel/lynxpoint + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # EC range is 0x800-0x9ff + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x00fc0901" + + # EC_SMI is GPIO34 + register "alt_gp_smi_en" = "0x0004" + register "gpe0_en_1" = "0x00000000" + # EC_SCI is GPIO36 + register "gpe0_en_2" = "0x00000010" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" + + register "ide_legacy_combined" = "0x0" + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x1" + register "sata_devslp_disable" = "0x1" + + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" + + register "sio_acpi_mode" = "1" + register "sio_i2c0_voltage" = "0" # 3.3V + register "sio_i2c1_voltage" = "0" # 3.3V + + # Force enable ASPM for PCIe Port 1 + register "pcie_port_force_aspm" = "0x01" + + # Route all USB ports to XHCI per default + register "xhci_default" = "1" + + # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP + register "icc_clock_disable" = "0x013c0000" + + device pci 13.0 off end # Smart Sound Audio DSP + device pci 14.0 on end # USB3 XHCI + device pci 15.0 on end # Serial I/O DMA + device pci 15.1 on end # I2C0 + device pci 15.2 on end # I2C1 + device pci 15.3 off end # GSPI0 + device pci 15.4 off end # GSPI1 + device pci 15.5 off end # UART0 + device pci 15.6 off end # UART1 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 17.0 off end # SDIO + device pci 19.0 off end # GbE + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1d.0 on end # USB2 EHCI + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on + chip ec/google/chromeec + # We only have one init function that + # we need to call to initialize the + # keyboard part of the EC. + device pnp ff.1 on # dummy address + end + end + end # LPC bridge + device pci 1f.2 on end # SATA Controller + device pci 1f.3 on end # SMBus + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/google/slippy/variants/wolf/hda_verb.c b/src/mainboard/google/slippy/variants/wolf/hda_verb.c new file mode 100644 index 0000000000..b043bf52ce --- /dev/null +++ b/src/mainboard/google/slippy/variants/wolf/hda_verb.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0283, // Codec Vendor / Device ID: Realtek ALC283 + 0x10ec0283, // Subsystem ID + 0x0000000e, // Number of jacks (NID entries) + + 0x0017ff00, // Function Reset + 0x0017ff00, // Double Function Reset + 0x000F0000, // Pad - get vendor id + 0x000F0002, // Pad - get revision id + + /* Bits 31:28 - Codec Address */ + /* Bits 27:20 - NID */ + /* Bits 19:8 - Verb ID */ + /* Bits 7:0 - Payload */ + + /* NID 0x01, HDA Codec Subsystem ID Verb Table */ + AZALIA_SUBVENDOR(0x0, 0x11790670), + + /* Pin Widget Verb Table */ + + /* Pin Complex (NID 0x12) DMIC - interior mobile lid */ + AZALIA_PIN_CFG(0x0, 0x12, 0xb7a61010), + + /* Pin Complex (NID 0x14) SPKR-OUT - Internal Speakers */ + // group 1, cap 0 + // no connector, no jack detect + // speaker out, analog + // fixed function, internal, Location N/A + AZALIA_PIN_CFG(0x0, 0x14, 0x90170110), + + /* Pin Complex (NID 0x17) MONO Out - Disabled */ + AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0), + + /* Pin Complex (NID 0x18) MIC1 PORTB - Disabled */ + AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0), + + /* Pin Complex (NID 0x19) MIC2 - 3.5mm Jack */ + // group2, cap 0 + // black, jack detect + // Mic in, 3.5mm Jack + // connector, External left panel + AZALIA_PIN_CFG(0x0, 0x19, 0x03a11020), + + /* Pin Complex (NID 0x1A) LINE1 - Internal Mic */ + // group 1, cap 1 + // no connector, no jack detect + // mic in, analog connection + // Fixed function, internal, Location N/A + AZALIA_PIN_CFG(0x0, 0x1a, 0x90a70111), + + /* Pin Complex (NID 0x1B) LINE2 - Disabled */ + AZALIA_PIN_CFG(0x0, 0x1b, 0x411111f0), + + /* Pin Complex (NID 0x1D) PCBeep */ + // eapd low on ex-amp, laptop, custom enable + // mute spkr on hpout + // pcbeep en able, checksum + // no physical, Internal, Location N/A + AZALIA_PIN_CFG(0x0, 0x1d, 0x4015812d), + + /* Pin Complex (NID 0x1E) SPDIF-OUT - Disabled*/ + AZALIA_PIN_CFG(0x0, 0x1e, 0x411111f0), + + /* Pin Complex (NID 0x21) HP-OUT - 3.5mm Jack*/ + // group2, cap 1 + // black, jack detect + // HPOut, 3.5mm Jack + // connector, left panel + AZALIA_PIN_CFG(0x0, 0x21, 0x03211021), + + /* Undocumented settings from Realtek (needed for beep_gen) */ + /* Widget node 0x20 */ + 0x02050010, + 0x02040c20, + 0x0205001b, + 0x0204081b, + + /* Tuned jack detection */ + 0x02050043, + 0x0204A614, + 0x02050047, + 0x02049470, +}; + +const u32 pc_beep_verbs[] = { + 0x00170500, /* power up everything (codec, dac, adc, mixers) */ + 0x01470740, /* enable speaker out */ + 0x01470c02, /* set speaker EAPD pin */ + 0x0143b01f, /* unmute speaker */ + 0x00c37100, /* unmute mixer nid 0xc input 1 */ + 0x00b37410, /* unmute mixer nid 0xb beep input and set volume */ +}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/google/slippy/variants/wolf/include/variant/acpi/mainboard.asl b/src/mainboard/google/slippy/variants/wolf/include/variant/acpi/mainboard.asl new file mode 100644 index 0000000000..335077cc83 --- /dev/null +++ b/src/mainboard/google/slippy/variants/wolf/include/variant/acpi/mainboard.asl @@ -0,0 +1,88 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <onboard.h> + +Scope (\_SB) +{ + Device (LID0) + { + Name(_HID, EisaId("PNP0C0D")) + Method(_LID, 0) + { + Store (\_SB.PCI0.LPCB.EC0.LIDS, \LIDS) + Return (\LIDS) + } + + // There is no GPIO for LID, the EC pulses WAKE# pin instead. + // There is no GPE for WAKE#, so fake it with PCI_EXP_WAKE + Name (_PRW, Package(){ 0x69, 5 }) // PCI_EXP + } + + Device (PWRB) + { + Name(_HID, EisaId("PNP0C0C")) + } +} + +Scope (\_SB.PCI0.I2C0) +{ + Device (CTPA) + { + Name (_HID, "CYAP0000") + Name (_DDN, "Cypress Touchpad") + Name (_UID, 3) + Name (ISTP, 1) /* Touchpad */ + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + 0x67, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C0" // ResourceSource + ) + Interrupt (ResourceConsumer, Edge, ActiveLow) + { + BOARD_TRACKPAD_IRQ + } + }) + + Method (_STA) + { + If (LEqual (\S1EN, 1)) { + Return (0xF) + } Else { + Return (0x0) + } + } + + Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 }) + + Method (_DSW, 3, NotSerialized) + { + Store (BOARD_TRACKPAD_WAKE_GPIO, Local0) + If (LEqual (Arg0, 1)) { + // Enable GPIO as wake source + \_SB.PCI0.LPCB.GWAK (Local0) + } + } + + /* Allow device to power off in S0 */ + Name (_S0W, 4) + } +}
\ No newline at end of file diff --git a/src/mainboard/google/slippy/variants/wolf/include/variant/gpio.h b/src/mainboard/google/slippy/variants/wolf/include/variant/gpio.h new file mode 100644 index 0000000000..fe2b31438d --- /dev/null +++ b/src/mainboard/google/slippy/variants/wolf/include/variant/gpio.h @@ -0,0 +1,120 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef WOLF_GPIO_H +#define WOLF_GPIO_H + +struct pch_lp_gpio_map; + +const struct pch_lp_gpio_map mainboard_gpio_map[] = { + LP_GPIO_UNUSED, /* 0: UNUSED */ + LP_GPIO_UNUSED, /* 1: UNUSED */ + LP_GPIO_UNUSED, /* 2: UNUSED */ + LP_GPIO_UNUSED, /* 3: UNUSED */ + LP_GPIO_NATIVE, /* 4: NATIVE: I2C0_SDA_GPIO4 */ + LP_GPIO_NATIVE, /* 5: NATIVE: I2C0_SCL_GPIO5 */ + LP_GPIO_NATIVE, /* 6: NATIVE: I2C1_SDA_GPIO6 */ + LP_GPIO_NATIVE, /* 7: NATIVE: I2C1_SCL_GPIO7 */ + LP_GPIO_ACPI_SCI, /* 8: LTE_WAKE_L_Q */ + LP_GPIO_INPUT, /* 9: RAM_ID1 */ + LP_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */ + LP_GPIO_UNUSED, /* 11: UNUSED */ + LP_GPIO_INPUT_INVERT, /* 12: TRACKPAD_INT_L (WAKE) */ + LP_GPIO_INPUT, /* 13: RAM_ID0 */ + LP_GPIO_INPUT, /* 14: EC_IN_RW */ + LP_GPIO_UNUSED, /* 15: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 16: UNUSED */ + LP_GPIO_UNUSED, /* 17: UNUSED */ + LP_GPIO_NATIVE, /* 18: PCIE_CLKREQ_WLAN# */ + LP_GPIO_UNUSED, /* 19: UNUSED */ + LP_GPIO_UNUSED, /* 20: UNUSED */ + LP_GPIO_UNUSED, /* 21: UNUSED */ + LP_GPIO_UNUSED, /* 22: UNUSED */ + LP_GPIO_UNUSED, /* 23: UNUSED */ + LP_GPIO_UNUSED, /* 24: UNUSED */ + LP_GPIO_INPUT_INVERT, /* 25: TOUCH_INT_L (WAKE) */ + LP_GPIO_UNUSED, /* 26: UNUSED */ + LP_GPIO_UNUSED, /* 27: UNUSED */ + LP_GPIO_UNUSED, /* 28: UNUSED */ + LP_GPIO_UNUSED, /* 29: UNUSED */ + LP_GPIO_NATIVE, /* 30: NATIVE: PCH_SUSWARN_L */ + LP_GPIO_NATIVE, /* 31: NATIVE: ACPRESENT */ + LP_GPIO_NATIVE, /* 32: NATIVE: LPC_CLKRUN_L */ + LP_GPIO_NATIVE, /* 33: NATIVE: DEVSLP0 */ + LP_GPIO_ACPI_SMI, /* 34: EC_SMI_L */ + LP_GPIO_ACPI_SMI, /* 35: PCH_NMI_DBG_L (route in NMI_EN) */ + LP_GPIO_ACPI_SCI, /* 36: EC_SCI_L */ + LP_GPIO_UNUSED, /* 37: UNUSED */ + LP_GPIO_UNUSED, /* 38: UNUSED */ + LP_GPIO_UNUSED, /* 39: UNUSED */ + LP_GPIO_NATIVE, /* 40: NATIVE: USB_OC0# */ + LP_GPIO_UNUSED, /* 41: UNUSED */ + LP_GPIO_NATIVE, /* 42: NATIVE: USB_OC2# */ + LP_GPIO_UNUSED, /* 43: UNUSED */ + LP_GPIO_OUT_HIGH, /* 44: PP3300_SSD_EN */ + LP_GPIO_OUT_HIGH, /* 45: PP3300_CODEC_EN */ + LP_GPIO_OUT_HIGH, /* 46: WLAN_DISABLE_L */ + LP_GPIO_INPUT, /* 47: RAM_ID2 */ + LP_GPIO_UNUSED, /* 48: UNUSED */ + LP_GPIO_UNUSED, /* 49: UNUSED */ + LP_GPIO_UNUSED, /* 50: UNUSED */ + LP_GPIO_UNUSED, /* 51: UNUSED */ + LP_GPIO_INPUT, /* 52: SIM_DET */ + LP_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX */ + LP_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX */ + LP_GPIO_UNUSED, /* 55: UNUSED */ + LP_GPIO_UNUSED, /* 56: UNUSED */ + LP_GPIO_OUT_HIGH, /* 57: PP3300_CCD_EN */ + LP_GPIO_INPUT, /* 58: PCH_SPI_WP_D */ + LP_GPIO_OUT_HIGH, /* 59: LTE_DISABLE_L */ + LP_GPIO_NATIVE, /* 60: NATIVE: SML0ALERT */ + LP_GPIO_UNUSED, /* 61: UNUSED */ + LP_GPIO_UNUSED, /* 62: UNUSED */ + LP_GPIO_NATIVE, /* 63: NATIVE: PCH_SLP_S5_L */ + LP_GPIO_UNUSED, /* 64: UNUSED */ + LP_GPIO_UNUSED, /* 65: UNUSED */ + LP_GPIO_UNUSED, /* 66: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 67: UNUSED */ + LP_GPIO_UNUSED, /* 68: UNUSED */ + LP_GPIO_UNUSED, /* 69: UNUSED */ + LP_GPIO_UNUSED, /* 70: UNUSED */ + LP_GPIO_NATIVE, /* 71: NATIVE: MODPHY_EN */ + LP_GPIO_NATIVE, /* 72: NATIVE: PCH_BATLOW# */ + LP_GPIO_NATIVE, /* 73: NATIVE: SMB1ALERT# */ + LP_GPIO_NATIVE, /* 74: NATIVE: SMB_ME1_DAT */ + LP_GPIO_NATIVE, /* 75: NATIVE: SMB_ME1_CLK */ + LP_GPIO_UNUSED, /* 76: UNUSED */ + LP_GPIO_UNUSED, /* 77: UNUSED */ + LP_GPIO_UNUSED, /* 78: UNUSED */ + LP_GPIO_UNUSED, /* 79: UNUSED */ + LP_GPIO_UNUSED, /* 80: UNUSED */ + LP_GPIO_NATIVE, /* 81: NATIVE: SPKR */ + LP_GPIO_NATIVE, /* 82: NATIVE: EC_RCIN_L */ + LP_GPIO_UNUSED, /* 83: UNUSED */ + LP_GPIO_UNUSED, /* 84: UNUSED */ + LP_GPIO_UNUSED, /* 85: UNUSED */ + LP_GPIO_UNUSED, /* 86: UNUSED (STRAP) */ + LP_GPIO_UNUSED, /* 87: UNUSED */ + LP_GPIO_UNUSED, /* 88: UNUSED */ + LP_GPIO_UNUSED, /* 89: UNUSED */ + LP_GPIO_UNUSED, /* 90: UNUSED */ + LP_GPIO_UNUSED, /* 91: UNUSED */ + LP_GPIO_UNUSED, /* 92: UNUSED */ + LP_GPIO_UNUSED, /* 93: UNUSED */ + LP_GPIO_UNUSED, /* 94: UNUSED */ + LP_GPIO_END +}; + +#endif
\ No newline at end of file diff --git a/src/mainboard/google/slippy/variants/wolf/romstage.c b/src/mainboard/google/slippy/variants/wolf/romstage.c new file mode 100644 index 0000000000..4bdde31b5d --- /dev/null +++ b/src/mainboard/google/slippy/variants/wolf/romstage.c @@ -0,0 +1,175 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <delay.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <cbfs.h> +#include <console/console.h> +#include <cpu/intel/haswell/haswell.h> +#include "ec/google/chromeec/ec.h" +#include <northbridge/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/raminit.h> +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/lynxpoint/lp_gpio.h> +#include <variant/gpio.h> +#include "../../variant.h" + +const struct rcba_config_instruction rcba_config[] = { + + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP PCIE INTA -> PIRQA + * D29IP_E1P EHCI INTA -> PIRQD + * D20IP_XHCI XHCI INTA -> PIRQC (MSI) + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), + RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)), + RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP)), + RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)), + RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)), + RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)), + RCBA_SET_REG_32(D20IP, (INTA << D20IP_XHCI)), + + /* Device interrupt route registers */ + RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),/* LPC */ + RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),/* EHCI */ + RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),/* PCIE */ + RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),/* HDA */ + RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),/* ME */ + RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),/* SIO */ + RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),/* XHCI */ + RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),/* SDIO */ + + /* Disable unused devices (board specific) */ + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +}; + +/* Copy SPD data for on-board memory */ +static void copy_spd(struct pei_data *peid) +{ + const int gpio_vector[] = {13, 9, 47, -1}; + int spd_index = get_gpios(gpio_vector); + char *spd_file; + size_t spd_file_len; + + printk(BIOS_DEBUG, "SPD index %d\n", spd_index); + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (!spd_file) + die("SPD data not found."); + + if (spd_file_len < + ((spd_index + 1) * sizeof(peid->spd_data[0]))) { + printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n"); + spd_index = 0; + } + + if (spd_file_len < sizeof(peid->spd_data[0])) + die("Missing SPD data."); + + /* Index 0-2, are 4GB config with both CH0 and CH1 + * Index 3-5, are 2GB config with CH0 only + */ + switch (spd_index) { + case 3: case 4: case 5: + peid->dimm_channel1_disabled = 3; + } + + memcpy(peid->spd_data[0], + spd_file + + spd_index * sizeof(peid->spd_data[0]), + sizeof(peid->spd_data[0])); +} + +void variant_romstage_entry(unsigned long bist) +{ + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = (uintptr_t)DEFAULT_MCHBAR, + .dmibar = (uintptr_t)DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = DEFAULT_PCIEXBAR, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = HPET_ADDR, + .rcba = (uintptr_t)DEFAULT_RCBA, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .temp_mmio_base = 0xfed08000, + .system_type = 5, /* ULT */ + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, + .ec_present = 1, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + .dimm_channel0_disabled = 2, + .dimm_channel1_disabled = 2, + .max_ddr3_freq = 1600, + .usb_xhci_on_resume = 1, + .usb2_ports = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, /* P0: Port A, CN10 */ + USB_PORT_BACK_PANEL }, + { 0x0040, 1, 2, /* P1: Port B, CN11 */ + USB_PORT_BACK_PANEL }, + { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ + USB_PORT_MINI_PCIE }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: LTE */ + USB_PORT_INTERNAL }, + { 0x0000, 1, USB_OC_PIN_SKIP, /* P5: EMPTY */ + USB_PORT_SKIP }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SD Card */ + USB_PORT_INTERNAL }, + { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */ + USB_PORT_SKIP }, + }, + .usb3_ports = { + /* Enable, OCn# */ + { 1, 0 }, /* P1; Port A, CN10 */ + { 1, 2 }, /* P2; Port B, CN11 */ + { 0, USB_OC_PIN_SKIP }, /* P3; */ + { 0, USB_OC_PIN_SKIP }, /* P4; */ + }, + }; + + struct romstage_params romstage_params = { + .pei_data = &pei_data, + .gpio_map = &mainboard_gpio_map, + .rcba_config = &rcba_config[0], + .bist = bist, + .copy_spd = copy_spd, + }; + + /* Call into the real romstage main with this board's attributes. */ + romstage_common(&romstage_params); +} diff --git a/src/mainboard/google/slippy/variants/wolf/spd/Hynix_HMT425S6AFR6A.spd.hex b/src/mainboard/google/slippy/variants/wolf/spd/Hynix_HMT425S6AFR6A.spd.hex new file mode 100644 index 0000000000..7b0932743d --- /dev/null +++ b/src/mainboard/google/slippy/variants/wolf/spd/Hynix_HMT425S6AFR6A.spd.hex @@ -0,0 +1,17 @@ +# Hynix HMT425S6AFR6A-PBA +92 12 0B 03 04 19 02 02 03 52 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 11 62 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 AD 01 00 00 00 00 00 00 FF AB +48 4D 54 34 32 35 53 36 41 46 52 36 41 2D 50 42 +20 20 4E 30 80 AD 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/slippy/variants/wolf/spd/Micron_4KTF25664HZ.spd.hex b/src/mainboard/google/slippy/variants/wolf/spd/Micron_4KTF25664HZ.spd.hex new file mode 100644 index 0000000000..cbe9e4fbfe --- /dev/null +++ b/src/mainboard/google/slippy/variants/wolf/spd/Micron_4KTF25664HZ.spd.hex @@ -0,0 +1,17 @@ +# Micron 4KTF25664HZ-1G6E1 +92 11 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00 +69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 05 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2C 00 00 00 00 00 00 00 AD 75 +34 4B 54 46 32 35 36 36 34 48 5A 2D 31 47 36 45 +31 20 45 31 80 2C 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF diff --git a/src/mainboard/google/slippy/variants/wolf/spd/Samsung_K4B4G1646B.spd.hex b/src/mainboard/google/slippy/variants/wolf/spd/Samsung_K4B4G1646B.spd.hex new file mode 100644 index 0000000000..fb529d01db --- /dev/null +++ b/src/mainboard/google/slippy/variants/wolf/spd/Samsung_K4B4G1646B.spd.hex @@ -0,0 +1,17 @@ +# Samsung K4B4G1646B-HYXX +92 11 0B 03 04 19 02 02 03 11 01 08 0C 00 3E 00 +69 78 69 3C 69 11 20 89 20 08 3C 3C 01 68 83 01 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 0F 11 02 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 80 CE 01 00 00 00 00 00 00 2A E3 +4D 34 37 31 42 35 36 37 34 42 48 30 2D 43 48 39 +20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF +FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
\ No newline at end of file |