diff options
author | Stefan Reinauer <stepan@openbios.org> | 2003-07-21 13:05:56 +0000 |
---|---|---|
committer | Stefan Reinauer <stepan@openbios.org> | 2003-07-21 13:05:56 +0000 |
commit | 73a9cf4ccb58eccb4a1383088f7c86f325fdad7f (patch) | |
tree | 7617b4d10448e9576eb18a05e68efb8cfefff966 /src/northbridge/amd/amdk8/coherent_ht.c | |
parent | 8275bad6f640d0da5ead72984f1efe32e6172d7d (diff) | |
download | coreboot-73a9cf4ccb58eccb4a1383088f7c86f325fdad7f.tar.xz |
* update quartet target to latest SMP changes.
* remove dead code from coherent_ht.c
* add ldtstop code for link speed changes
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/amd/amdk8/coherent_ht.c')
-rw-r--r-- | src/northbridge/amd/amdk8/coherent_ht.c | 395 |
1 files changed, 3 insertions, 392 deletions
diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c index 23ebd60e81..471af5a415 100644 --- a/src/northbridge/amd/amdk8/coherent_ht.c +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -1,333 +1,3 @@ -#if 0 -static void setup_coherent_ht_domain(void) -{ - static const unsigned int register_values[] = { - /* Routing Table Node i - * F0:0x40 i = 0, - * F0:0x44 i = 1, - * F0:0x48 i = 2, - * F0:0x4c i = 3, - * F0:0x50 i = 4, - * F0:0x54 i = 5, - * F0:0x58 i = 6, - * F0:0x5c i = 7 - * [ 0: 3] Request Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [11: 8] Response Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [19:16] Broadcast route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - */ - PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101, - - /* Hypetransport Transaction Control Register - * F0:0x68 - * [ 0: 0] Disable read byte probe - * 0 = Probes issues - * 1 = Probes not issued - * [ 1: 1] Disable Read Doubleword probe - * 0 = Probes issued - * 1 = Probes not issued - * [ 2: 2] Disable write byte probes - * 0 = Probes issued - * 1 = Probes not issued - * [ 3: 3] Disable Write Doubleword Probes - * 0 = Probes issued - * 1 = Probes not issued. - * [ 4: 4] Disable Memroy Controller Target Start - * 0 = TgtStart packets are generated - * 1 = TgtStart packets are not generated. - * [ 5: 5] CPU1 Enable - * 0 = Second CPU disabled or not present - * 1 = Second CPU enabled. - * [ 6: 6] CPU Request PassPW - * 0 = CPU requests do not pass posted writes - * 1 = CPU requests pass posted writes. - * [ 7: 7] CPU read Respons PassPW - * 0 = CPU Responses do not pass posted writes - * 1 = CPU responses pass posted writes. - * [ 8: 8] Disable Probe Memory Cancel - * 0 = Probes may generate MemCancels - * 1 = Probes may not generate MemCancels - * [ 9: 9] Disable Remote Probe Memory Cancel. - * 0 = Probes hitting dirty blocks generate memory cancel packets - * 1 = Only probed caches on the same node as the memory controller - * generate cancel packets. - * [10:10] Disable Fill Probe - * 0 = Probes issued for cache fills - * 1 = Probes not issued for cache fills. - * [11:11] Response PassPw - * 0 = Downstream response PassPW based on original request - * 1 = Downstream response PassPW set to 1 - * [12:12] Change ISOC to Ordered - * 0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization - * 1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering. - * [14:13] Buffer Release Priority select - * 00 = 64 - * 01 = 16 - * 10 = 8 - * 11 = 2 - * [15:15] Limit Coherent HT Configuration Space Range - * 0 = No coherent HT configuration space restrictions - * 1 = Limit coherent HT configuration space based on node count - * [16:16] Local Interrupt Conversion Enable. - * 0 = ExtInt/NMI interrups unaffected. - * 1 = ExtInt/NMI broadcat interrupts converted to LINT0/1 - * [17:17] APIC Extended Broadcast Enable. - * 0 = APIC broadcast is 0F - * 1 = APIC broadcast is FF - * [18:18] APIC Extended ID Enable - * 0 = APIC ID is 4 bits. - * 1 = APIC ID is 8 bits. - * [19:19] APIC Extended Spurious Vector Enable - * 0 = Lower 4 bits of spurious vector are read-only 1111 - * 1 = Lower 4 bits of spurious vecotr are writeable. - * [20:20] Sequence ID Source Node Enable - * 0 = Normal operation - * 1 = Keep SeqID on routed packets for debugging. - * [22:21] Downstream non-posted request limit - * 00 = No limit - * 01 = Limited to 1 - * 10 = Limited to 4 - * 11 = Limited to 8 - * [23:23] RESERVED - * [25:24] Medium-Priority Bypass Count - * - Maximum # of times a medium priority access can pass a low - * priority access before Medium-Priority mode is disabled for one access. - * [27:26] High-Priority Bypass Count - * - Maximum # of times a high prioirty access can pass a medium or low - * priority access before High-prioirty mode is disabled for one access. - * [28:28] Enable High Priority CPU Reads - * 0 = Cpu reads are medium prioirty - * 1 = Cpu reads are high prioirty - * [29:29] Disable Low Priority Writes - * 0 = Non-isochronous writes are low priority - * 1 = Non-isochronous writes are medium prioirty - * [30:30] Disable High Priority Isochronous writes - * 0 = Isochronous writes are high priority - * 1 = Isochronous writes are medium priority - * [31:31] Disable Medium Priority Isochronous writes - * 0 = Isochronous writes are medium are high - * 1 = With bit 30 set makes Isochrouns writes low priority. - */ - PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f, - /* HT Initialization Control Register - * F0:0x6C ok... - * [ 0: 0] Routing Table Disable - * 0 = Packets are routed according to routing tables - * 1 = Packets are routed according to the default link field - * [ 1: 1] Request Disable (BSP should clear this) - * 0 = Request packets may be generated - * 1 = Request packets may not be generated. - * [ 3: 2] Default Link (Read-only) - * 00 = LDT0 - * 01 = LDT1 - * 10 = LDT2 - * 11 = CPU on same node - * [ 4: 4] Cold Reset - * - Scratch bit cleared by a cold reset - * [ 5: 5] BIOS Reset Detect - * - Scratch bit cleared by a cold reset - * [ 6: 6] INIT Detect - * - Scratch bit cleared by a warm or cold reset not by an INIT - * - */ - PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4), - /* LDTi Capabilities Registers - * F0:0x80 i = 0, - * F0:0xA0 i = 1, - * F0:0xC0 i = 2, - */ - /* LDTi Link Control Registrs - * F0:0x84 i = 0, - * F0:0xA4 i = 1, - * F0:0xC4 i = 2, - * [ 1: 1] CRC Flood Enable - * 0 = Do not generate sync packets on CRC error - * 1 = Generate sync packets on CRC error - * [ 2: 2] CRC Start Test (Read-Only) - * [ 3: 3] CRC Force Frame Error - * 0 = Do not generate bad CRC - * 1 = Generate bad CRC - * [ 4: 4] Link Failure - * 0 = No link failure detected - * 1 = Link failure detected - * [ 5: 5] Initialization Complete - * 0 = Initialization not complete - * 1 = Initialization complete - * [ 6: 6] Receiver off - * 0 = Recevier on - * 1 = Receiver off - * [ 7: 7] Transmitter Off - * 0 = Transmitter on - * 1 = Transmitter off - * [ 9: 8] CRC_Error - * 00 = No error - * [0] = 1 Error on byte lane 0 - * [1] = 1 Error on byte lane 1 - * [12:12] Isochrnous Enable (Read-Only) - * [13:13] HT Stop Tristate Enable - * 0 = Driven during an LDTSTOP_L - * 1 = Tristated during and LDTSTOP_L - * [14:14] Extended CTL Time - * 0 = CTL is asserted for 16 bit times during link initialization - * 1 = CTL is asserted for 50us during link initialization - * [18:16] Max Link Width In (Read-Only?) - * 000 = 8 bit link - * 001 = 16bit link - * [19:19] Doubleword Flow Control in (Read-Only) - * 0 = This link does not support doubleword flow control - * 1 = This link supports doubleword flow control - * [22:20] Max Link Width Out (Read-Only?) - * 000 = 8 bit link - * 001 = 16bit link - * [23:23] Doubleworld Flow Control out (Read-Only) - * 0 = This link does not support doubleword flow control - * 1 = This link supports doubleworkd flow control - * [26:24] Link Width In - * 000 = Use 8 bits - * 001 = Use 16 bits - * 010 = reserved - * 011 = Use 32 bits - * 100 = Use 2 bits - * 101 = Use 4 bits - * 110 = reserved - * 111 = Link physically not connected - * [27:27] Doubleword Flow Control In Enable - * 0 = Doubleword flow control disabled - * 1 = Doubleword flow control enabled (Not currently supported) - * [30:28] Link Width Out - * 000 = Use 8 bits - * 001 = Use 16 bits - * 010 = reserved - * 011 = Use 32 bits - * 100 = Use 2 bits - * 101 = Use 4 bits - * 110 = reserved - * 111 = Link physically not connected - * [31:31] Doubleworld Flow Control Out Enable - * 0 = Doubleworld flow control disabled - * 1 = Doubleword flow control enabled (Not currently supported) - */ - PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020, - /* LDTi Frequency/Revision Registers - * F0:0x88 i = 0, - * F0:0xA8 i = 1, - * F0:0xC8 i = 2, - * [ 4: 0] Minor Revision - * Contains the HT Minor revision - * [ 7: 5] Major Revision - * Contains the HT Major revision - * [11: 8] Link Frequency (Takes effect the next time the link is reconnected) - * 0000 = 200Mhz - * 0001 = reserved - * 0010 = 400Mhz - * 0011 = reserved - * 0100 = 600Mhz - * 0101 = 800Mhz - * 0110 = 1000Mhz - * 0111 = reserved - * 1000 = reserved - * 1001 = reserved - * 1010 = reserved - * 1011 = reserved - * 1100 = reserved - * 1101 = reserved - * 1110 = reserved - * 1111 = 100 Mhz - * [15:12] Error (Not currently Implemented) - * [31:16] Indicates the frequency capabilities of the link - * [16] = 1 encoding 0000 of freq supported - * [17] = 1 encoding 0001 of freq supported - * [18] = 1 encoding 0010 of freq supported - * [19] = 1 encoding 0011 of freq supported - * [20] = 1 encoding 0100 of freq supported - * [21] = 1 encoding 0101 of freq supported - * [22] = 1 encoding 0110 of freq supported - * [23] = 1 encoding 0111 of freq supported - * [24] = 1 encoding 1000 of freq supported - * [25] = 1 encoding 1001 of freq supported - * [26] = 1 encoding 1010 of freq supported - * [27] = 1 encoding 1011 of freq supported - * [28] = 1 encoding 1100 of freq supported - * [29] = 1 encoding 1101 of freq supported - * [30] = 1 encoding 1110 of freq supported - * [31] = 1 encoding 1111 of freq supported - */ - PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200, - /* LDTi Feature Capability - * F0:0x8C i = 0, - * F0:0xAC i = 1, - * F0:0xCC i = 2, - */ - /* LDTi Buffer Count Registers - * F0:0x90 i = 0, - * F0:0xB0 i = 1, - * F0:0xD0 i = 2, - */ - /* LDTi Bus Number Registers - * F0:0x94 i = 0, - * F0:0xB4 i = 1, - * F0:0xD4 i = 2, - * For NonCoherent HT specifies the bus number downstream (behind the host bridge) - * [ 0: 7] Primary Bus Number - * [15: 8] Secondary Bus Number - * [23:15] Subordiante Bus Number - * [31:24] reserved - */ - PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000, - /* LDTi Type Registers - * F0:0x98 i = 0, - * F0:0xB8 i = 1, - * F0:0xD8 i = 2, - */ - }; - int i; - int max; - print_debug("setting up coherent ht domain....\r\n"); - max = sizeof(register_values)/sizeof(register_values[0]); - for(i = 0; i < max; i += 3) { - device_t dev; - unsigned where; - unsigned long reg; -#if 0 - print_debug_hex32(register_values[i]); - print_debug(" <-"); - print_debug_hex32(register_values[i+2]); - print_debug("\r\n"); -#endif - dev = register_values[i] & ~0xff; - where = register_values[i] & 0xff; - reg = pci_read_config32(dev, where); - reg &= register_values[i+1]; - reg |= register_values[i+2]; - pci_write_config32(dev, where, reg); -#if 0 - reg = pci_read_config32(register_values[i]); - reg &= register_values[i+1]; - reg |= register_values[i+2] & ~register_values[i+1]; - pci_write_config32(register_values[i], reg); -#endif - } - print_debug("done.\r\n"); -} -#else /* coherent hypertransport initialization for AMD64 * written by Stefan Reinauer <stepan@openbios.info> * (c) 2003 by SuSE Linux AG @@ -343,13 +13,12 @@ static void setup_coherent_ht_domain(void) * */ -#if 0 -#include "compat.h" -#endif - #include <device/pci_def.h> #include "arch/romcc_io.h" +/* + * + */ /* when generating a temporary row configuration we * don't want broadcast to be enabled for that node. @@ -493,62 +162,6 @@ static bool check_connection(u8 src, u8 dest, u8 link) return 1; } -#if 0 -static unsigned int generate_row(u8 node, u8 row, u8 maxnodes) -{ - /* Routing Table Node i - * - * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c - * i: 0, 1, 2, 3, 4, 5, 6, 7 - * - * [ 0: 3] Request Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [11: 8] Response Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [19:16] Broadcast route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - */ - - u32 ret=DEFAULT; - - static const unsigned int rows_2p[2][2] = { - { 0x00050101, 0x00010404 }, - { 0x00010404, 0x00050101 } - }; - - static const unsigned int rows_4p[4][4] = { - { 0x00070101, 0x00010404, 0x00050202, 0x00010402 }, - { 0x00010808, 0x000b0101, 0x00010802, 0x00090202 }, - { 0x00090202, 0x00010802, 0x000b0101, 0x00010808 }, - { 0x00010402, 0x00050202, 0x00010404, 0x00070101 } - }; - - if (!(node>=maxnodes || row>=maxnodes)) { - if (maxnodes==2) - ret=rows_2p[node][row]; - if (maxnodes==4) - ret=rows_4p[node][row]; - } - -#if 0 - printk_spew("generating entry n=%d, r=%d, max=%d - row=%x\n", - node,row,maxnodes,ret); -#endif - - return ret; -} -#endif - - static void fill_row(u8 node, u8 row, u32 value) { #if 0 @@ -835,5 +448,3 @@ static int setup_coherent_ht_domain(void) return reset_needed; } - -#endif |