diff options
author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-24 00:34:15 +0300 |
---|---|---|
committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2018-05-31 03:42:11 +0000 |
commit | d840eb5719e51e1946ab322c0eb94defc72dde1d (patch) | |
tree | d74fa8bb59692dbb92fed137363d61f427dda2d0 /src/northbridge/amd/amdk8/raminit.c | |
parent | 4979ffc5cb267c7b0a5ad84c8bb9729e6b5613b1 (diff) | |
download | coreboot-d840eb5719e51e1946ab322c0eb94defc72dde1d.tar.xz |
Remove AMD K8 cpu and northbridge support
Change-Id: I9c53dfa93bf906334f5c80e4525a1c27153656a3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/northbridge/amd/amdk8/raminit.c')
-rw-r--r-- | src/northbridge/amd/amdk8/raminit.c | 2507 |
1 files changed, 0 insertions, 2507 deletions
diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c deleted file mode 100644 index ac1fced750..0000000000 --- a/src/northbridge/amd/amdk8/raminit.c +++ /dev/null @@ -1,2507 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * 2004.11 yhlu add 4 rank DIMM support - * 2004.12 yhlu add D0 support - * 2005.02 yhlu add E0 memory hole support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <cpu/x86/cache.h> -#include <cpu/x86/lapic.h> -#include <cpu/x86/mtrr.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <lib.h> -#include <stdlib.h> -#include <arch/acpi.h> -#include <reset.h> -#include "raminit.h" -#include "amdk8.h" -#if IS_ENABLED(CONFIG_HAVE_OPTION_TABLE) -#include "option_table.h" -#endif - -#include <arch/early_variables.h> -struct sys_info sysinfo_car CAR_GLOBAL; - -void setup_resource_map(const unsigned int *register_values, int max) -{ - int i; - for (i = 0; i < max; i += 3) { - pci_devfn_t dev; - unsigned where; - unsigned long reg; - dev = register_values[i] & ~0xfff; - where = register_values[i] & 0xfff; - reg = pci_read_config32(dev, where); - reg &= register_values[i+1]; - reg |= register_values[i+2]; - pci_write_config32(dev, where, reg); - } -} - -static int controller_present(const struct mem_controller *ctrl) -{ - return pci_read_config32(ctrl->f0, 0) == 0x11001022; -} - -#if IS_ENABLED(CONFIG_RAMINIT_SYSINFO) -void sdram_set_registers(const struct mem_controller *ctrl, struct sys_info *sysinfo) -#else -void sdram_set_registers(const struct mem_controller *ctrl) -#endif -{ - static const unsigned int register_values[] = { - - /* Careful set limit registers before base registers which - contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* DRAM CS Base Address i Registers - * F2:0x40 i = 0 - * F2:0x44 i = 1 - * F2:0x48 i = 2 - * F2:0x4C i = 3 - * F2:0x50 i = 4 - * F2:0x54 i = 5 - * F2:0x58 i = 6 - * F2:0x5C i = 7 - * [ 0: 0] Chip-Select Bank Enable - * 0 = Bank Disabled - * 1 = Bank Enabled - * [ 8: 1] Reserved - * [15: 9] Base Address (19-13) - * An optimization used when all DIMM are the same size... - * [20:16] Reserved - * [31:21] Base Address (35-25) - * This field defines the top 11 addresses bit of a 40-bit - * address that define the memory address space. These - * bits decode 32-MByte blocks of memory. - */ - PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x5C), 0x001f01fe, 0x00000000, - /* DRAM CS Mask Address i Registers - * F2:0x60 i = 0 - * F2:0x64 i = 1 - * F2:0x68 i = 2 - * F2:0x6C i = 3 - * F2:0x70 i = 4 - * F2:0x74 i = 5 - * F2:0x78 i = 6 - * F2:0x7C i = 7 - * Select bits to exclude from comparison with the DRAM Base address register. - * [ 8: 0] Reserved - * [15: 9] Address Mask (19-13) - * Address to be excluded from the optimized case - * [20:16] Reserved - * [29:21] Address Mask (33-25) - * The bits with an address mask of 1 are excluded from address comparison - * [31:30] Reserved - * - */ - PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x7C), 0xC01f01ff, 0x00000000, - /* DRAM Bank Address Mapping Register - * F2:0x80 - * Specify the memory module size - * [ 2: 0] CS1/0 - * [ 6: 4] CS3/2 - * [10: 8] CS5/4 - * [14:12] CS7/6 - * 000 = 32Mbyte (Rows = 12 & Col = 8) - * 001 = 64Mbyte (Rows = 12 & Col = 9) - * 010 = 128Mbyte (Rows = 13 & Col = 9)|(Rows = 12 & Col = 10) - * 011 = 256Mbyte (Rows = 13 & Col = 10)|(Rows = 12 & Col = 11) - * 100 = 512Mbyte (Rows = 13 & Col = 11)|(Rows = 14 & Col = 10) - * 101 = 1Gbyte (Rows = 14 & Col = 11)|(Rows = 13 & Col = 12) - * 110 = 2Gbyte (Rows = 14 & Col = 12) - * 111 = reserved - * [ 3: 3] Reserved - * [ 7: 7] Reserved - * [11:11] Reserved - * [31:15] - */ - PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000000, - /* DRAM Timing Low Register - * F2:0x88 - * [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid) - * 000 = reserved - * 001 = CL 2 - * 010 = CL 3 - * 011 = reserved - * 100 = reserved - * 101 = CL 2.5 - * 110 = reserved - * 111 = reserved - * [ 3: 3] Reserved - * [ 7: 4] Trc (Row Cycle Time, Ras#-active to Ras#-active/bank auto refresh) - * 0000 = 7 bus clocks - * 0001 = 8 bus clocks - * ... - * 1110 = 21 bus clocks - * 1111 = 22 bus clocks - * [11: 8] Trfc (Row refresh Cycle time, Auto-refresh-active to RAS#-active or RAS#auto-refresh) - * 0000 = 9 bus clocks - * 0010 = 10 bus clocks - * .... - * 1110 = 23 bus clocks - * 1111 = 24 bus clocks - * [14:12] Trcd (Ras#-active to Case#-read/write Delay) - * 000 = reserved - * 001 = reserved - * 010 = 2 bus clocks - * 011 = 3 bus clocks - * 100 = 4 bus clocks - * 101 = 5 bus clocks - * 110 = 6 bus clocks - * 111 = reserved - * [15:15] Reserved - * [18:16] Trrd (Ras# to Ras# Delay) - * 000 = reserved - * 001 = reserved - * 010 = 2 bus clocks - * 011 = 3 bus clocks - * 100 = 4 bus clocks - * 101 = reserved - * 110 = reserved - * 111 = reserved - * [19:19] Reserved - * [23:20] Tras (Minmum Ras# Active Time) - * 0000 to 0100 = reserved - * 0101 = 5 bus clocks - * ... - * 1111 = 15 bus clocks - * [26:24] Trp (Row Precharge Time) - * 000 = reserved - * 001 = reserved - * 010 = 2 bus clocks - * 011 = 3 bus clocks - * 100 = 4 bus clocks - * 101 = 5 bus clocks - * 110 = 6 bus clocks - * 111 = reserved - * [27:27] Reserved - * [28:28] Twr (Write Recovery Time) - * 0 = 2 bus clocks - * 1 = 3 bus clocks - * [31:29] Reserved - */ - PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x02522001 /* 0x03623125 */ , - /* DRAM Timing High Register - * F2:0x8C - * [ 0: 0] Twtr (Write to Read Delay) - * 0 = 1 bus Clocks - * 1 = 2 bus Clocks - * [ 3: 1] Reserved - * [ 6: 4] Trwt (Read to Write Delay) - * 000 = 1 bus clocks - * 001 = 2 bus clocks - * 010 = 3 bus clocks - * 011 = 4 bus clocks - * 100 = 5 bus clocks - * 101 = 6 bus clocks - * 110 = reserved - * 111 = reserved - * [ 7: 7] Reserved - * [12: 8] Tref (Refresh Rate) - * 00000 = 100MHz 4K rows - * 00001 = 133MHz 4K rows - * 00010 = 166MHz 4K rows - * 00011 = 200MHz 4K rows - * 01000 = 100MHz 8K/16K rows - * 01001 = 133MHz 8K/16K rows - * 01010 = 166MHz 8K/16K rows - * 01011 = 200MHz 8K/16K rows - * [19:13] Reserved - * [22:20] Twcl (Write CAS Latency) - * 000 = 1 Mem clock after CAS# (Unbuffered Dimms) - * 001 = 2 Mem clocks after CAS# (Registered Dimms) - * [31:23] Reserved - */ - PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, (0 << 20)|(0 << 8)|(0 << 4)|(0 << 0), - /* DRAM Config Low Register - * F2:0x90 - * [ 0: 0] DLL Disable - * 0 = Enabled - * 1 = Disabled - * [ 1: 1] D_DRV - * 0 = Normal Drive - * 1 = Weak Drive - * [ 2: 2] QFC_EN - * 0 = Disabled - * 1 = Enabled - * [ 3: 3] Disable DQS Hystersis (FIXME handle this one carefully) - * 0 = Enable DQS input filter - * 1 = Disable DQS input filtering - * [ 7: 4] Reserved - * [ 8: 8] DRAM_Init - * 0 = Initialization done or not yet started. - * 1 = Initiate DRAM intialization sequence - * [ 9: 9] SO-Dimm Enable - * 0 = Do nothing - * 1 = SO-Dimms present - * [10:10] DramEnable - * 0 = DRAM not enabled - * 1 = DRAM initialized and enabled - * [11:11] Memory Clear Status - * 0 = Memory Clear function has not completed - * 1 = Memory Clear function has completed - * [12:12] Exit Self-Refresh - * 0 = Exit from self-refresh done or not yet started - * 1 = DRAM exiting from self refresh - * [13:13] Self-Refresh Status - * 0 = Normal Operation - * 1 = Self-refresh mode active - * [15:14] Read/Write Queue Bypass Count - * 00 = 2 - * 01 = 4 - * 10 = 8 - * 11 = 16 - * [16:16] 128-bit/64-Bit - * 0 = 64bit Interface to DRAM - * 1 = 128bit Interface to DRAM - * [17:17] DIMM ECC Enable - * 0 = Some DIMMs do not have ECC - * 1 = ALL DIMMS have ECC bits - * [18:18] UnBuffered DIMMs - * 0 = Buffered DIMMS - * 1 = Unbuffered DIMMS - * [19:19] Enable 32-Byte Granularity - * 0 = Optimize for 64byte bursts - * 1 = Optimize for 32byte bursts - * [20:20] DIMM 0 is x4 - * [21:21] DIMM 1 is x4 - * [22:22] DIMM 2 is x4 - * [23:23] DIMM 3 is x4 - * 0 = DIMM is not x4 - * 1 = x4 DIMM present - * [24:24] Disable DRAM Receivers - * 0 = Receivers enabled - * 1 = Receivers disabled - * [27:25] Bypass Max - * 000 = Arbiters chois is always respected - * 001 = Oldest entry in DCQ can be bypassed 1 time - * 010 = Oldest entry in DCQ can be bypassed 2 times - * 011 = Oldest entry in DCQ can be bypassed 3 times - * 100 = Oldest entry in DCQ can be bypassed 4 times - * 101 = Oldest entry in DCQ can be bypassed 5 times - * 110 = Oldest entry in DCQ can be bypassed 6 times - * 111 = Oldest entry in DCQ can be bypassed 7 times - * [31:28] Reserved - */ - PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000, - (4 << 25)|(0 << 24)| - (0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)| - (1 << 19)|(0 << 18)|(1 << 17)|(0 << 16)| - (2 << 14)|(0 << 13)|(0 << 12)| - (0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)| - (0 << 3) |(0 << 1) |(0 << 0), - /* DRAM Config High Register - * F2:0x94 - * [ 0: 3] Maximum Asynchronous Latency - * 0000 = 0 ns - * ... - * 1111 = 15 ns - * [ 7: 4] Reserved - * [11: 8] Read Preamble - * 0000 = 2.0 ns - * 0001 = 2.5 ns - * 0010 = 3.0 ns - * 0011 = 3.5 ns - * 0100 = 4.0 ns - * 0101 = 4.5 ns - * 0110 = 5.0 ns - * 0111 = 5.5 ns - * 1000 = 6.0 ns - * 1001 = 6.5 ns - * 1010 = 7.0 ns - * 1011 = 7.5 ns - * 1100 = 8.0 ns - * 1101 = 8.5 ns - * 1110 = 9.0 ns - * 1111 = 9.5 ns - * [15:12] Reserved - * [18:16] Idle Cycle Limit - * 000 = 0 cycles - * 001 = 4 cycles - * 010 = 8 cycles - * 011 = 16 cycles - * 100 = 32 cycles - * 101 = 64 cycles - * 110 = 128 cycles - * 111 = 256 cycles - * [19:19] Dynamic Idle Cycle Center Enable - * 0 = Use Idle Cycle Limit - * 1 = Generate a dynamic Idle cycle limit - * [22:20] DRAM MEMCLK Frequency - * 000 = 100MHz - * 001 = reserved - * 010 = 133MHz - * 011 = reserved - * 100 = reserved - * 101 = 166MHz - * 110 = reserved - * 111 = reserved - * [24:23] Reserved - * [25:25] Memory Clock Ratio Valid (FIXME carefully enable memclk) - * 0 = Disable MemClks - * 1 = Enable MemClks - * [26:26] Memory Clock 0 Enable - * 0 = Disabled - * 1 = Enabled - * [27:27] Memory Clock 1 Enable - * 0 = Disabled - * 1 = Enabled - * [28:28] Memory Clock 2 Enable - * 0 = Disabled - * 1 = Enabled - * [29:29] Memory Clock 3 Enable - * 0 = Disabled - * 1 = Enabled - * [31:30] Reserved - */ - PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, - (0 << 29)|(0 << 28)|(0 << 27)|(0 << 26)|(0 << 25)| - (0 << 20)|(0 << 19)|(DCH_IDLE_LIMIT_16 << 16)|(0 << 8)|(0 << 0), - /* DRAM Delay Line Register - * F2:0x98 - * Adjust the skew of the input DQS strobe relative to DATA - * [15: 0] Reserved - * [23:16] Delay Line Adjust - * Adjusts the DLL derived PDL delay by one or more delay stages - * in either the faster or slower direction. - * [24:24} Adjust Slower - * 0 = Do Nothing - * 1 = Adj is used to increase the PDL delay - * [25:25] Adjust Faster - * 0 = Do Nothing - * 1 = Adj is used to decrease the PDL delay - * [31:26] Reserved - */ - PCI_ADDR(0, 0x18, 2, 0x98), 0xfc00ffff, 0x00000000, - /* MCA NB Status Low reg */ - PCI_ADDR(0, 0x18, 3, 0x48), 0x00f00000, 0x00000000, - /* MCA NB Status high reg */ - PCI_ADDR(0, 0x18, 3, 0x4c), 0x01801e8c, 0x00000000, - /* MCA NB address Low reg */ - PCI_ADDR(0, 0x18, 3, 0x50), 0x00000007, 0x00000000, - /* MCA NB address high reg */ - PCI_ADDR(0, 0x18, 3, 0x54), 0xffffff00, 0x00000000, - /* DRAM Scrub Control Register - * F3:0x58 - * [ 4: 0] DRAM Scrube Rate - * [ 7: 5] reserved - * [12: 8] L2 Scrub Rate - * [15:13] reserved - * [20:16] Dcache Scrub - * [31:21] reserved - * Scrub Rates - * 00000 = Do not scrub - * 00001 = 40.00 ns - * 00010 = 80.00 ns - * 00011 = 160.00 ns - * 00100 = 320.00 ns - * 00101 = 640.00 ns - * 00110 = 1.28 us - * 00111 = 2.56 us - * 01000 = 5.12 us - * 01001 = 10.20 us - * 01011 = 41.00 us - * 01100 = 81.90 us - * 01101 = 163.80 us - * 01110 = 327.70 us - * 01111 = 655.40 us - * 10000 = 1.31 ms - * 10001 = 2.62 ms - * 10010 = 5.24 ms - * 10011 = 10.49 ms - * 10100 = 20.97 ms - * 10101 = 42.00 ms - * 10110 = 84.00 ms - * All Others = Reserved - */ - PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000, - /* DRAM Scrub Address Low Register - * F3:0x5C - * [ 0: 0] DRAM Scrubber Redirect Enable - * 0 = Do nothing - * 1 = Scrubber Corrects errors found in normal operation - * [ 5: 1] Reserved - * [31: 6] DRAM Scrub Address 31-6 - */ - PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000, - /* DRAM Scrub Address High Register - * F3:0x60 - * [ 7: 0] DRAM Scrubb Address 39-32 - * [31: 8] Reserved - */ - PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000, - }; - int i; - int max; - - if (!controller_present(ctrl)) { - return; - } - printk(BIOS_SPEW, "setting up CPU%02x northbridge registers\n", ctrl->node_id); - max = ARRAY_SIZE(register_values); - for (i = 0; i < max; i += 3) { - pci_devfn_t dev; - unsigned where; - unsigned long reg; - dev = (register_values[i] & ~0xfff) - PCI_DEV(0, 0x18, 0) + ctrl->f0; - where = register_values[i] & 0xfff; - reg = pci_read_config32(dev, where); - reg &= register_values[i+1]; - reg |= register_values[i+2]; - pci_write_config32(dev, where, reg); - } - printk(BIOS_SPEW, "done.\n"); -} - -static void hw_enable_ecc(const struct mem_controller *ctrl) -{ - uint32_t dcl, nbcap; - nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); - dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); - dcl &= ~DCL_DimmEccEn; - if (nbcap & NBCAP_ECC) { - dcl |= DCL_DimmEccEn; - } - if (read_option(ECC_memory, 1) == 0) { - dcl &= ~DCL_DimmEccEn; - } - pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); -} - -static int is_dual_channel(const struct mem_controller *ctrl) -{ - uint32_t dcl; - dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); - return dcl & DCL_128BitEn; -} - -static int is_opteron(const struct mem_controller *ctrl) -{ - /* Test to see if I am an Opteron. Socket 939 based Athlon64 - * have dual channel capability, too, so we need a better test - * for Opterons. - * However, all code uses is_opteron() to find out whether to - * use dual channel, so if we really check for opteron here, we - * need to fix up all code using this function, too. - */ - uint32_t nbcap; - nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); - return !!(nbcap & NBCAP_128Bit); -} - -static int is_registered(const struct mem_controller *ctrl) -{ - /* Test to see if we are dealing with registered SDRAM. - * If we are not registered we are unbuffered. - * This function must be called after spd_handle_unbuffered_dimms. - */ - uint32_t dcl; - dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); - return !(dcl & DCL_UnBuffDimm); -} - -struct dimm_size { - unsigned long side1; - unsigned long side2; - unsigned long rows; - unsigned long col; -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - unsigned long rank; -#endif -}; - -static struct dimm_size spd_get_dimm_size(unsigned device) -{ - /* Calculate the log base 2 size of a DIMM in bits */ - struct dimm_size sz; - int value, low; - sz.side1 = 0; - sz.side2 = 0; - sz.rows = 0; - sz.col = 0; -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - sz.rank = 0; -#endif - - /* Note it might be easier to use byte 31 here, it has the DIMM size as - * a multiple of 4MB. The way we do it now we can size both - * sides of an assymetric dimm. - */ - value = spd_read_byte(device, 3); /* rows */ - if (value < 0) goto hw_err; - if ((value & 0xf) == 0) goto val_err; - sz.side1 += value & 0xf; - sz.rows = value & 0xf; - - value = spd_read_byte(device, 4); /* columns */ - if (value < 0) goto hw_err; - if ((value & 0xf) == 0) goto val_err; - sz.side1 += value & 0xf; - sz.col = value & 0xf; - - value = spd_read_byte(device, 17); /* banks */ - if (value < 0) goto hw_err; - if ((value & 0xff) == 0) goto val_err; - sz.side1 += log2(value & 0xff); - - /* Get the module data width and convert it to a power of two */ - value = spd_read_byte(device, 7); /* (high byte) */ - if (value < 0) goto hw_err; - value &= 0xff; - value <<= 8; - - low = spd_read_byte(device, 6); /* (low byte) */ - if (low < 0) goto hw_err; - value = value | (low & 0xff); - if ((value != 72) && (value != 64)) goto val_err; - sz.side1 += log2(value); - - /* side 2 */ - value = spd_read_byte(device, 5); /* number of physical banks */ - if (value < 0) goto hw_err; - if (value == 1) goto out; - if ((value != 2) && (value != 4)) { - goto val_err; - } -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - sz.rank = value; -#endif - - /* Start with the symmetrical case */ - sz.side2 = sz.side1; - - value = spd_read_byte(device, 3); /* rows */ - if (value < 0) goto hw_err; - if ((value & 0xf0) == 0) goto out; /* If symmetrical we are done */ - sz.side2 -= (value & 0x0f); /* Subtract out rows on side 1 */ - sz.side2 += ((value >> 4) & 0x0f); /* Add in rows on side 2 */ - - value = spd_read_byte(device, 4); /* columns */ - if (value < 0) goto hw_err; - if ((value & 0xff) == 0) goto val_err; - sz.side2 -= (value & 0x0f); /* Subtract out columns on side 1 */ - sz.side2 += ((value >> 4) & 0x0f); /* Add in columsn on side 2 */ - - goto out; - - val_err: - die("Bad SPD value\n"); - /* If an hw_error occurs report that I have no memory */ -hw_err: - sz.side1 = 0; - sz.side2 = 0; - sz.rows = 0; - sz.col = 0; -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - sz.rank = 0; -#endif -out: - return sz; -} - - -static void set_dimm_size(const struct mem_controller *ctrl, struct dimm_size sz, unsigned index) -{ - uint32_t base0, base1; - uint32_t dch; - - if (sz.side1 != sz.side2) { - sz.side2 = 0; - } - - /* For each base register. - * Place the dimm size in 32 MB quantities in the bits 31 - 21. - * The initialize dimm size is in bits. - * Set the base enable bit0. - */ - - base0 = base1 = 0; - - /* Make certain side1 of the dimm is at least 32MB */ - if (sz.side1 >= (25 +3)) { - base0 = (1 << ((sz.side1 - (25 + 3)) + 21)) | 1; - } - - /* Make certain side2 of the dimm is at least 32MB */ - if (sz.side2 >= (25 + 3)) { - base1 = (1 << ((sz.side2 - (25 + 3)) + 21)) | 1; - } - - /* Double the size if we are using dual channel memory */ - if (is_dual_channel(ctrl)) { - base0 = (base0 << 1) | (base0 & 1); - base1 = (base1 << 1) | (base1 & 1); - } - - /* Clear the reserved bits */ - base0 &= ~0x001ffffe; - base1 &= ~0x001ffffe; - - /* Set the appropriate DIMM base address register */ - pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), base0); - pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), base1); -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - if (sz.rank == 4) { - pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+4)<<2), base0); - pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+5)<<2), base1); - } -#endif - - /* Enable the memory clocks for this DIMM */ - if (base0) { - dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); - dch |= DCH_MEMCLK_EN0 << index; -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - if (sz.rank == 4) { - dch |= DCH_MEMCLK_EN0 << (index + 2); - } -#endif - pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); - } -} - -static void set_dimm_map(const struct mem_controller *ctrl, struct dimm_size sz, unsigned index) -{ - static const unsigned cs_map_aa[] = { - /* (row=12, col=8)(14, 12) ---> (0, 0) (2, 4) */ - 0, 1, 3, 6, 0, - 0, 2, 4, 7, 9, - 0, 0, 5, 8,10, - }; - - uint32_t map; - - map = pci_read_config32(ctrl->f2, DRAM_BANK_ADDR_MAP); - map &= ~(0xf << (index * 4)); -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - if (sz.rank == 4) { - map &= ~(0xf << ((index + 2) * 4)); - } -#endif - - - /* Make certain side1 of the dimm is at least 32MB */ - if (sz.side1 >= (25 +3)) { - if (is_cpu_pre_d0()) { - map |= (sz.side1 - (25 + 3)) << (index *4); -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - if (sz.rank == 4) { - map |= (sz.side1 - (25 + 3)) << ((index + 2) * 4); - } -#endif - } - else { - map |= cs_map_aa[(sz.rows - 12) * 5 + (sz.col - 8) ] << (index*4); -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - if (sz.rank == 4) { - map |= cs_map_aa[(sz.rows - 12) * 5 + (sz.col - 8) ] << ((index + 2) * 4); - } -#endif - } - } - - pci_write_config32(ctrl->f2, DRAM_BANK_ADDR_MAP, map); - -} - -static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask) -{ - int i; - - for (i = 0; i < DIMM_SOCKETS; i++) { - struct dimm_size sz; - if (!(dimm_mask & (1 << i))) { - continue; - } - sz = spd_get_dimm_size(ctrl->channel0[i]); - if (sz.side1 == 0) { - return -1; /* Report SPD error */ - } - set_dimm_size(ctrl, sz, i); - set_dimm_map (ctrl, sz, i); - } - return dimm_mask; -} - -static void route_dram_accesses(const struct mem_controller *ctrl, - unsigned long base_k, unsigned long limit_k) -{ - /* Route the addresses to the controller node */ - unsigned node_id; - unsigned limit; - unsigned base; - unsigned index; - unsigned limit_reg, base_reg; - pci_devfn_t device; - - node_id = ctrl->node_id; - index = (node_id << 3); - limit = (limit_k << 2); - limit &= 0xffff0000; - limit -= 0x00010000; - limit |= (0 << 8) | (node_id << 0); - base = (base_k << 2); - base &= 0xffff0000; - base |= (0 << 8) | (1<<1) | (1<<0); - - limit_reg = 0x44 + index; - base_reg = 0x40 + index; - for (device = PCI_DEV(0, 0x18, 1); device <= PCI_DEV(0, 0x1f, 1); device += PCI_DEV(0, 1, 0)) { - pci_write_config32(device, limit_reg, limit); - pci_write_config32(device, base_reg, base); - } -} - -static void set_top_mem(unsigned tom_k, unsigned hole_startk) -{ - /* Error if I don't have memory */ - if (!tom_k) { - die("No memory?"); - } - - /* Report the amount of memory. */ - printk(BIOS_DEBUG, "RAM end at 0x%08x kB\n", tom_k); - - /* Now set top of memory */ - msr_t msr; - if (tom_k > (4*1024*1024)) { - printk(BIOS_SPEW, "Handling memory mapped above 4 GB\n"); - printk(BIOS_SPEW, "Upper RAM end at 0x%08x kB\n", tom_k); - msr.lo = (tom_k & 0x003fffff) << 10; - msr.hi = (tom_k & 0xffc00000) >> 22; - wrmsr(TOP_MEM2, msr); - printk(BIOS_SPEW, "Correcting memory amount mapped below 4 GB\n"); - } - - /* Leave a 64M hole between TOP_MEM and TOP_MEM2 - * so I can see my ROM chip and other I/O devices. - */ - if (tom_k >= 0x003f0000) { -#if CONFIG_HW_MEM_HOLE_SIZEK != 0 - if (hole_startk != 0) { - tom_k = hole_startk; - } else -#endif - tom_k = 0x3f0000; - printk(BIOS_SPEW, "Adjusting lower RAM end\n"); - } - printk(BIOS_SPEW, "Lower RAM end at 0x%08x kB\n", tom_k); - msr.lo = (tom_k & 0x003fffff) << 10; - msr.hi = (tom_k & 0xffc00000) >> 22; - wrmsr(TOP_MEM, msr); -} - -static unsigned long interleave_chip_selects(const struct mem_controller *ctrl) -{ - /* 35 - 25 */ - static const uint8_t csbase_low_shift[] = { - /* 32MB */ (13 - 4), - /* 64MB */ (14 - 4), - /* 128MB */ (14 - 4), - /* 256MB */ (15 - 4), - /* 512MB */ (15 - 4), - /* 1GB */ (16 - 4), - /* 2GB */ (16 - 4), - }; - - static const uint8_t csbase_low_d0_shift[] = { - /* 32MB */ (13 - 4), - /* 64MB */ (14 - 4), - /* 128MB */ (14 - 4), - /* 128MB */ (15 - 4), - /* 256MB */ (15 - 4), - /* 512MB */ (15 - 4), - /* 256MB */ (16 - 4), - /* 512MB */ (16 - 4), - /* 1GB */ (16 - 4), - /* 1GB */ (17 - 4), - /* 2GB */ (17 - 4), - }; - - /* cs_base_high is not changed */ - - uint32_t csbase_inc; - int chip_selects, index; - int bits; - unsigned common_size; - unsigned common_cs_mode; - uint32_t csbase, csmask; - - /* See if all of the memory chip selects are the same size - * and if so count them. - */ - chip_selects = 0; - common_size = 0; - common_cs_mode = 0; - for (index = 0; index < 8; index++) { - unsigned size; - unsigned cs_mode; - uint32_t value; - - value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2)); - - /* Is it enabled? */ - if (!(value & 1)) { - continue; - } - chip_selects++; - size = value >> 21; - if (common_size == 0) { - common_size = size; - } - /* The size differed fail */ - if (common_size != size) { - return 0; - } - - value = pci_read_config32(ctrl->f2, DRAM_BANK_ADDR_MAP); - cs_mode =(value >> ((index>>1)*4)) & 0xf; - if (cs_mode == 0) continue; - if (common_cs_mode == 0) { - common_cs_mode = cs_mode; - } - /* The cs_mode differed fail */ - if (common_cs_mode != cs_mode) { - return 0; - } - } - - /* Chip selects can only be interleaved when there is - * more than one and their is a power of two of them. - */ - bits = log2(chip_selects); - if (((1 << bits) != chip_selects) || (bits < 1) || (bits > 3)) { - return 0; - } - - /* Find the bits of csbase that we need to interleave on */ - if (is_cpu_pre_d0()) { - csbase_inc = 1 << csbase_low_shift[common_cs_mode]; - if (is_dual_channel(ctrl)) { - /* Also we run out of address mask bits if we try and interleave 8 4GB dimms */ - if ((bits == 3) && (common_size == (1 << (32 - 3)))) { - return 0; - } - csbase_inc <<=1; - } - } - else { - csbase_inc = 1 << csbase_low_d0_shift[common_cs_mode]; - if (is_dual_channel(ctrl)) { - if ((bits == 3) && (common_cs_mode > 8)) { - return 0; - } - csbase_inc <<=1; - } - } - - /* Compute the initial values for csbase and csbask. - * In csbase just set the enable bit and the base to zero. - * In csmask set the mask bits for the size and page level interleave. - */ - csbase = 0 | 1; - csmask = (((common_size << bits) - 1) << 21); - csmask |= 0xfe00 & ~((csbase_inc << bits) - csbase_inc); - for (index = 0; index < 8; index++) { - uint32_t value; - - value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2)); - /* Is it enabled? */ - if (!(value & 1)) { - continue; - } - pci_write_config32(ctrl->f2, DRAM_CSBASE + (index << 2), csbase); - pci_write_config32(ctrl->f2, DRAM_CSMASK + (index << 2), csmask); - csbase += csbase_inc; - } - - printk(BIOS_SPEW, "Interleaved\n"); - - /* Return the memory size in K */ - return common_size << (15 + bits); -} - -static unsigned long order_chip_selects(const struct mem_controller *ctrl) -{ - unsigned long tom; - - /* Remember which registers we have used in the high 8 bits of tom */ - tom = 0; - for (;;) { - /* Find the largest remaining candidate */ - unsigned index, candidate; - uint32_t csbase, csmask; - unsigned size; - csbase = 0; - candidate = 0; - for (index = 0; index < 8; index++) { - uint32_t value; - value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2)); - - /* Is it enabled? */ - if (!(value & 1)) { - continue; - } - - /* Is it greater? */ - if (value <= csbase) { - continue; - } - - /* Has it already been selected */ - if (tom & (1 << (index + 24))) { - continue; - } - /* I have a new candidate */ - csbase = value; - candidate = index; - } - - /* See if I have found a new candidate */ - if (csbase == 0) { - break; - } - - /* Remember the dimm size */ - size = csbase >> 21; - - /* Remember I have used this register */ - tom |= (1 << (candidate + 24)); - - /* Recompute the cs base register value */ - csbase = (tom << 21) | 1; - - /* Increment the top of memory */ - tom += size; - - /* Compute the memory mask */ - csmask = ((size -1) << 21); - csmask |= 0xfe00; /* For now don't optimize */ - - /* Write the new base register */ - pci_write_config32(ctrl->f2, DRAM_CSBASE + (candidate << 2), csbase); - /* Write the new mask register */ - pci_write_config32(ctrl->f2, DRAM_CSMASK + (candidate << 2), csmask); - - } - /* Return the memory size in K */ - return (tom & ~0xff000000) << 15; -} - -static unsigned long memory_end_k(const struct mem_controller *ctrl, int max_node_id) -{ - unsigned node_id; - unsigned end_k; - /* Find the last memory address used */ - end_k = 0; - for (node_id = 0; node_id < max_node_id; node_id++) { - uint32_t limit, base; - unsigned index; - index = node_id << 3; - base = pci_read_config32(ctrl->f1, 0x40 + index); - /* Only look at the limit if the base is enabled */ - if ((base & 3) == 3) { - limit = pci_read_config32(ctrl->f1, 0x44 + index); - end_k = ((limit + 0x00010000) & 0xffff0000) >> 2; - } - } - return end_k; -} - -static void order_dimms(const struct mem_controller *ctrl) -{ - unsigned long tom_k, base_k; - - if (read_option(interleave_chip_selects, 1) != 0) { - tom_k = interleave_chip_selects(ctrl); - } else { - printk(BIOS_DEBUG, "Interleaving disabled\n"); - tom_k = 0; - } - - if (!tom_k) { - tom_k = order_chip_selects(ctrl); - } - - /* Compute the memory base address */ - base_k = memory_end_k(ctrl, ctrl->node_id); - tom_k += base_k; - route_dram_accesses(ctrl, base_k, tom_k); - set_top_mem(tom_k, 0); -} - -static long disable_dimm(const struct mem_controller *ctrl, unsigned index, long dimm_mask) -{ - printk(BIOS_DEBUG, "disabling dimm %02x\n", index); - pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), 0); - pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), 0); - dimm_mask &= ~(1 << index); - return dimm_mask; -} - -static long spd_handle_unbuffered_dimms(const struct mem_controller *ctrl, - long dimm_mask) -{ - int i; - int registered; - int unbuffered; - int has_dualch = is_opteron(ctrl); - uint32_t dcl; - unbuffered = 0; - registered = 0; - for (i = 0; (i < DIMM_SOCKETS); i++) { - int value; - if (!(dimm_mask & (1 << i))) { - continue; - } - value = spd_read_byte(ctrl->channel0[i], 21); - if (value < 0) { - return -1; - } - - /* Registered dimm ? */ - if (value & (1 << 1)) { - registered = 1; - } - /* Otherwise it must be an unbuffered dimm */ - else { - unbuffered = 1; - } - } - if (unbuffered && registered) { - die("Mixed buffered and registered dimms not supported"); - } - - dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); - dcl &= ~DCL_UnBuffDimm; - if (unbuffered) { - if ((has_dualch) && (!is_cpu_pre_d0())) { - dcl |= DCL_UnBuffDimm; -#if IS_ENABLED(CONFIG_CPU_AMD_SOCKET_939) - if ((cpuid_eax(1) & 0x30) == 0x30) { - /* CS[7:4] is copy of CS[3:0], should be set for 939 socket */ - dcl |= DCL_UpperCSMap; - } -#endif - } else { - dcl |= DCL_UnBuffDimm; - } - } - pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); - - if (is_registered(ctrl)) { - printk(BIOS_SPEW, "Registered\n"); - } else { - printk(BIOS_SPEW, "Unbuffered\n"); - } - - return dimm_mask; -} - -static unsigned int spd_detect_dimms(const struct mem_controller *ctrl) -{ - unsigned dimm_mask; - int i; - dimm_mask = 0; - for (i = 0; i < DIMM_SOCKETS; i++) { - int byte; - unsigned device; - device = ctrl->channel0[i]; - if (device) { - byte = spd_read_byte(ctrl->channel0[i], 2); /* Type */ - if (byte == 7) { - dimm_mask |= (1 << i); - } - } - device = ctrl->channel1[i]; - if (device) { - byte = spd_read_byte(ctrl->channel1[i], 2); - if (byte == 7) { - dimm_mask |= (1 << (i + DIMM_SOCKETS)); - } - } - } - return dimm_mask; -} - -static long spd_enable_2channels(const struct mem_controller *ctrl, long dimm_mask) -{ - int i; - uint32_t nbcap; - /* SPD addresses to verify are identical */ - static const uint8_t addresses[] = { - 2, /* Type should be DDR SDRAM */ - 3, /* *Row addresses */ - 4, /* *Column addresses */ - 5, /* *Physical Banks */ - 6, /* *Module Data Width low */ - 7, /* *Module Data Width high */ - 9, /* *Cycle time at highest CAS Latency CL = X */ - 11, /* *SDRAM Type */ - 13, /* *SDRAM Width */ - 17, /* *Logical Banks */ - 18, /* *Supported CAS Latencies */ - 21, /* *SDRAM Module Attributes */ - 23, /* *Cycle time at CAS Latency (CLX - 0.5) */ - 25, /* *Cycle time at CAS Latency (CLX - 1.0) */ - 27, /* *tRP Row precharge time */ - 28, /* *Minimum Row Active to Row Active Delay (tRRD) */ - 29, /* *tRCD RAS to CAS */ - 30, /* *tRAS Activate to Precharge */ - 41, /* *Minimum Active to Active/Auto Refresh Time(Trc) */ - 42, /* *Minimum Auto Refresh Command Time(Trfc) */ - }; - /* If the dimms are not in pairs do not do dual channels */ - if ((dimm_mask & ((1 << DIMM_SOCKETS) - 1)) != - ((dimm_mask >> DIMM_SOCKETS) & ((1 << DIMM_SOCKETS) - 1))) { - goto single_channel; - } - /* If the CPU is not capable of doing dual channels don't do dual channels */ - nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); - if (!(nbcap & NBCAP_128Bit)) { - goto single_channel; - } - for (i = 0; (i < 4) && (ctrl->channel0[i]); i++) { - unsigned device0, device1; - int value0, value1; - int j; - /* If I don't have a dimm skip this one */ - if (!(dimm_mask & (1 << i))) { - continue; - } - device0 = ctrl->channel0[i]; - device1 = ctrl->channel1[i]; - for (j = 0; j < ARRAY_SIZE(addresses); j++) { - unsigned addr; - addr = addresses[j]; - value0 = spd_read_byte(device0, addr); - if (value0 < 0) { - return -1; - } - value1 = spd_read_byte(device1, addr); - if (value1 < 0) { - return -1; - } - if (value0 != value1) { - goto single_channel; - } - } - } - printk(BIOS_SPEW, "Enabling dual channel memory\n"); - uint32_t dcl; - dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); - dcl &= ~DCL_32ByteEn; - dcl |= DCL_128BitEn; - pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); - return dimm_mask; - single_channel: - dimm_mask &= ~((1 << (DIMM_SOCKETS *2)) - (1 << DIMM_SOCKETS)); - return dimm_mask; -} - -struct mem_param { - uint8_t cycle_time; - uint8_t divisor; /* In 1/2 ns increments */ - uint8_t tRC; - uint8_t tRFC; - uint32_t dch_memclk; - uint16_t dch_tref4k, dch_tref8k; - uint8_t dtl_twr; - uint8_t dtl_twtr; - uint8_t dtl_trwt[3][3]; /* first index is CAS_LAT 2/2.5/3 and 128/registered64/64 */ - uint8_t rdpreamble[4]; /* 0 is for registered, 1 for 1-2 DIMMS, 2 and 3 for 3 or 4 unreg dimm slots */ - char name[9]; -}; - -static const struct mem_param *get_mem_param(int freq) -{ - static const struct mem_param speed[] = { - [NBCAP_MEMCLK_100MHZ] = { - .name = "100MHz", - .cycle_time = 0xa0, - .divisor = (10 <<1), - .tRC = 0x46, - .tRFC = 0x50, - .dch_memclk = DCH_MEMCLK_100MHZ << DCH_MEMCLK_SHIFT, - .dch_tref4k = DTH_TREF_100MHZ_4K, - .dch_tref8k = DTH_TREF_100MHZ_8K, - .dtl_twr = 2, - .dtl_twtr = 1, - .dtl_trwt = { { 2, 2, 3 }, { 3, 3, 4 }, { 3, 3, 4 }}, - .rdpreamble = { ((9 << 1) + 0), ((9 << 1) + 0), ((9 << 1) + 0), ((9 << 1) + 0) } - }, - [NBCAP_MEMCLK_133MHZ] = { - .name = "133MHz", - .cycle_time = 0x75, - .divisor = (7<<1)+1, - .tRC = 0x41, - .tRFC = 0x4B, - .dch_memclk = DCH_MEMCLK_133MHZ << DCH_MEMCLK_SHIFT, - .dch_tref4k = DTH_TREF_133MHZ_4K, - .dch_tref8k = DTH_TREF_133MHZ_8K, - .dtl_twr = 2, - .dtl_twtr = 1, - .dtl_trwt = { { 2, 2, 3 }, { 3, 3, 4 }, { 3, 3, 4 }}, - .rdpreamble = { ((8 << 1) + 0), ((7 << 1) + 0), ((7 << 1) + 1), ((7 << 1) + 0) } - }, - [NBCAP_MEMCLK_166MHZ] = { - .name = "166MHz", - .cycle_time = 0x60, - .divisor = (6<<1), - .tRC = 0x3C, - .tRFC = 0x48, - .dch_memclk = DCH_MEMCLK_166MHZ << DCH_MEMCLK_SHIFT, - .dch_tref4k = DTH_TREF_166MHZ_4K, - .dch_tref8k = DTH_TREF_166MHZ_8K, - .dtl_twr = 3, - .dtl_twtr = 1, - .dtl_trwt = { { 3, 2, 3 }, { 3, 3, 4 }, { 4, 3, 4 }}, - .rdpreamble = { ((7 << 1) + 1), ((6 << 1) + 0), ((6 << 1) + 1), ((6 << 1) + 0) } - }, - [NBCAP_MEMCLK_200MHZ] = { - .name = "200MHz", - .cycle_time = 0x50, - .divisor = (5<<1), - .tRC = 0x37, - .tRFC = 0x46, - .dch_memclk = DCH_MEMCLK_200MHZ << DCH_MEMCLK_SHIFT, - .dch_tref4k = DTH_TREF_200MHZ_4K, - .dch_tref8k = DTH_TREF_200MHZ_8K, - .dtl_twr = 3, - .dtl_twtr = 2, - .dtl_trwt = { { 0, 2, 3 }, { 3, 3, 4 }, { 3, 3, 4 }}, - .rdpreamble = { ((7 << 1) + 0), ((5 << 1) + 0), ((5 << 1) + 1), ((5 << 1) + 1) } - } - }; - const struct mem_param *param; - - param = speed + freq; - printk(BIOS_SPEW, "%s\n", param->name); - return param; -} - -struct spd_set_memclk_result { - const struct mem_param *param; - long dimm_mask; -}; - -static int spd_dimm_loading_socket(const struct mem_controller *ctrl, long dimm_mask, int *freq_1t) -{ - -#if IS_ENABLED(CONFIG_CPU_AMD_SOCKET_939) - -/* + 1 raise so we detect 0 as bad field */ -#define DDR200 (NBCAP_MEMCLK_100MHZ + 1) -#define DDR333 (NBCAP_MEMCLK_166MHZ + 1) -#define DDR400 (NBCAP_MEMCLK_200MHZ + 1) -#define DDR_2T 0x80 -#define DDR_MASK 0x7 - -#define DDR200_2T (DDR_2T | DDR200) -#define DDR333_2T (DDR_2T | DDR333) -#define DDR400_2T (DDR_2T | DDR400) - -/* - Following table comes directly from BKDG (unbuffered DIMM support) - [Y][X] Y = ch0_0, ch1_0, ch0_1, ch1_1 1 = present 0 = empty - X uses same layout but 1 means double rank 0 is single rank/empty - - Following tables come from BKDG the ch{0_0,1_0,0_1,1_1} maps to - MEMCS_{1L,1H,2L,2H} in i the PDF. PreE is table 45, and revE table 46. -*/ - - static const unsigned char dimm_loading_config_preE[16][16] = { - [0x8] = {[0x0] = DDR400,[0x8] = DDR400}, - [0x2] = {[0x0] = DDR333,[0x2] = DDR400}, - [0xa] = {[0x0] = DDR400_2T,[0x2] = DDR400_2T, - [0x8] = DDR400_2T,[0xa] = DDR333_2T}, - [0xc] = {[0x0] = DDR400,[0xc] = DDR400}, - [0x3] = {[0x0] = DDR333,[0x3] = DDR400}, - [0xf] = {[0x0] = DDR400_2T,[0x3] = DDR400_2T, - [0xc] = DDR400_2T,[0xf] = DDR333_2T}, - }; - - static const unsigned char dimm_loading_config_revE[16][16] = { - [0x8] = {[0x0] = DDR400, [0x8] = DDR400}, - [0x2] = {[0x0] = DDR333, [0x2] = DDR400}, - [0x4] = {[0x0] = DDR400, [0x4] = DDR400}, - [0x1] = {[0x0] = DDR333, [0x1] = DDR400}, - [0xa] = {[0x0] = DDR400_2T, [0x2] = DDR400_2T, - [0x8] = DDR400_2T, [0xa] = DDR333_2T}, - [0x5] = {[0x0] = DDR400_2T, [0x1] = DDR400_2T, - [0x4] = DDR400_2T, [0x5] = DDR333_2T}, - [0xc] = {[0x0] = DDR400, [0xc] = DDR400, [0x4] = DDR400, [0x8] = DDR400}, - [0x3] = {[0x0] = DDR333, [0x1] = DDR333, [0x2] = DDR333, [0x3] = DDR400}, - [0xe] = {[0x0] = DDR400_2T, [0x4] = DDR400_2T, [0x2] = DDR400_2T, - [0x6] = DDR400_2T, [0x8] = DDR400_2T, [0xc] = DDR400_2T, - [0xa] = DDR333_2T, [0xe] = DDR333_2T}, - [0xb] = {[0x0] = DDR333, [0x1] = DDR400_2T, [0x2] = DDR333_2T, - [0x3] = DDR400_2T, [0x8] = DDR333_2T, [0x9] = DDR400_2T, - [0xa] = DDR333_2T, [0xb] = DDR333_2T}, - [0xd] = {[0x0] = DDR400_2T, [0x8] = DDR400_2T, [0x1] = DDR400_2T, - [0x9] = DDR333_2T, [0x4] = DDR400_2T, [0xc] = DDR400_2T, - [0x5] = DDR333_2T, [0xd] = DDR333_2T}, - [0x7] = {[0x0] = DDR333, [0x2] = DDR400_2T, [0x1] = DDR333_2T, - [0x3] = DDR400_2T, [0x4] = DDR333_2T, [0x6] = DDR400_2T, - [0x5] = DDR333_2T, [0x7] = DDR333_2T}, - [0xf] = {[0x0] = DDR400_2T, [0x1] = DDR400_2T, [0x4] = DDR400_2T, - [0x5] = DDR333_2T, [0x2] = DDR400_2T, [0x3] = DDR400_2T, - [0x6] = DDR400_2T, [0x7] = DDR333_2T, [0x8] = DDR400_2T, - [0x9] = DDR400_2T, [0xc] = DDR400_2T, [0xd] = DDR333_2T, - [0xa] = DDR333_2T, [0xb] = DDR333_2T, [0xe] = DDR333_2T, - [0xf] = DDR333_2T}, - }; - /*The dpos matches channel positions defined in BKDG and above arrays - The rpos is bitmask of dual rank dimms in same order as dpos */ - unsigned int dloading = 0, i, rpos = 0, dpos = 0; - const unsigned char (*dimm_loading_config)[16] = dimm_loading_config_revE; - int rank; - uint32_t dcl; - - if (is_cpu_pre_e0()) { - dimm_loading_config = dimm_loading_config_preE; - } - - /* only DIMMS two per channel */ - for (i = 0; i < 2; i++) { - if ((dimm_mask & (1 << i))) { - /* read rank channel 0 */ - rank = spd_read_byte(ctrl->channel0[i], 5); - if (rank < 0) goto hw_error; - rpos |= (rank == 2) ? (1 << (3 - (i * 2))) : 0; - dpos |= (1 << (3 - (i * 2))); - } - - if ((dimm_mask & (1 << (i+DIMM_SOCKETS)))) { - /* read rank channel 1*/ - rank = spd_read_byte(ctrl->channel1[i], 5); - if (rank < 0) goto hw_error; - rpos |= (rank == 2) ? (1 << (2 - (i * 2))) : 0; - dpos |= (1 << (2 - (i * 2))); - } - } - /* now the lookup, decode the max speed DDR400_2T etc */ - dloading = dimm_loading_config[dpos][rpos] & DDR_MASK; - -hw_error: - if (dloading != 0) { - /* we have valid combination check the restrictions */ - dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); - dcl |= ((dimm_loading_config[dpos][rpos] & DDR_2T) || CONFIG_K8_FORCE_2T_DRAM_TIMING) ? (DCL_En2T) : 0; - /* Set DuallDimm is second channel is completely empty (revD+) */ - if (((cpuid_eax(1) & 0xfff0f) >= 0x10f00) && ((dpos & 0x5) == 0)) { - printk(BIOS_DEBUG, "Setting DualDIMMen\n"); - dcl |= DCL_DualDIMMen; - } - pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); - return dloading - 1; - } else { - /* if we don't find it we se it to DDR400 */ - printk(BIOS_WARNING, "Detected strange DIMM configuration, may not work! (or bug)\n"); - return NBCAP_MEMCLK_200MHZ; - } - -#elif IS_ENABLED(CONFIG_CPU_AMD_SOCKET_754) - -#define CFGIDX(DIMM1,DIMM2,DIMM3) ((DIMM3)*9+(DIMM2)*3+(DIMM1)) - -#define EMPTY 0 -#define X8S_X16 1 -#define X8D 2 - -#define DDR200 NBCAP_MEMCLK_100MHZ -#define DDR333 NBCAP_MEMCLK_166MHZ -#define DDR400 NBCAP_MEMCLK_200MHZ - - /* this is table 42 from the BKDG, ignoring footnote 4, - * with the EMPTY, EMPTY, EMPTY row added */ - static const unsigned char cfgtable[][2] = { - [CFGIDX(EMPTY, EMPTY, EMPTY )] = { DDR400, DDR400 }, - [CFGIDX(X8S_X16, EMPTY, EMPTY )] = { DDR400, DDR400 }, - [CFGIDX(EMPTY, X8S_X16, EMPTY )] = { DDR400, DDR400 }, - [CFGIDX(EMPTY, EMPTY, X8S_X16 )] = { DDR400, DDR400 }, - [CFGIDX(X8D, EMPTY, EMPTY )] = { DDR400, DDR400 }, - [CFGIDX(EMPTY, X8D, EMPTY )] = { DDR400, DDR400 }, - [CFGIDX(EMPTY, EMPTY, X8D )] = { DDR400, DDR400 }, - [CFGIDX(X8S_X16, X8S_X16, EMPTY )] = { DDR400, DDR400 }, - [CFGIDX(X8S_X16, X8D, EMPTY )] = { DDR400, DDR400 }, - [CFGIDX(X8S_X16, EMPTY, X8S_X16 )] = { DDR400, DDR400 }, - [CFGIDX(X8S_X16, EMPTY, X8D )] = { DDR400, DDR400 }, - [CFGIDX(X8D, X8S_X16, EMPTY )] = { DDR400, DDR400 }, - [CFGIDX(X8D, X8D, EMPTY )] = { DDR333, DDR333 }, - [CFGIDX(X8D, EMPTY, X8S_X16 )] = { DDR400, DDR400 }, - [CFGIDX(X8D, EMPTY, X8D )] = { DDR333, DDR333 }, - [CFGIDX(EMPTY, X8S_X16, X8S_X16 )] = { DDR333, DDR400 }, - [CFGIDX(EMPTY, X8S_X16, X8D )] = { DDR200, DDR400 }, - [CFGIDX(EMPTY, X8D, X8S_X16 )] = { DDR200, DDR400 }, - [CFGIDX(EMPTY, X8D, X8D )] = { DDR200, DDR333 }, - [CFGIDX(X8S_X16, X8S_X16, X8S_X16 )] = { DDR333, DDR400 }, - [CFGIDX(X8S_X16, X8S_X16, X8D )] = { DDR200, DDR333 }, - [CFGIDX(X8S_X16, X8D, X8S_X16 )] = { DDR200, DDR333 }, - [CFGIDX(X8S_X16, X8D, X8D )] = { DDR200, DDR333 }, - [CFGIDX(X8D, X8S_X16, X8S_X16 )] = { DDR333, DDR333 }, - [CFGIDX(X8D, X8S_X16, X8D )] = { DDR200, DDR333 }, - [CFGIDX(X8D, X8D, X8S_X16 )] = { DDR200, DDR333 }, - [CFGIDX(X8D, X8D, X8D )] = { DDR200, DDR333 } - }; - - int i, rank, width, dimmtypes[3]; - const unsigned char *cfg; - - for (i = 0; i < 3; i++) { - if (dimm_mask & (1 << i)) { - rank = spd_read_byte(ctrl->channel0[i], 5); - width = spd_read_byte(ctrl->channel0[i], 13); - if (rank < 0 || width < 0) die("failed to read SPD"); - width &= 0x7f; - /* this is my guess as to how the criteria in the table - * are to be understood: - */ - dimmtypes[i] = width >= (rank == 1 ? 8 : 16) ? X8S_X16 : X8D; - } else { - dimmtypes[i] = EMPTY; - } - } - cfg = cfgtable[CFGIDX(dimmtypes[0], dimmtypes[1], dimmtypes[2])]; - *freq_1t = cfg[0]; - return is_cpu_c0() ? cfg[0] : cfg[1]; - -#else /* CONFIG_CPU_AMD_SOCKET_* */ - -/* well, there are socket 940 boards supported which obviously fail to - * compile with this */ -// #error load dependent memory clock limiting is not implemented for this socket - - /* see BKDG 4.1.3--if you just want to test a setup that doesn't - * require limiting, you may use the following code */ - - *freq_1t = NBCAP_MEMCLK_200MHZ; - return NBCAP_MEMCLK_200MHZ; - -#endif /* CONFIG_CPU_AMD_SOCKET_* */ - -} - -static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller *ctrl, long dimm_mask) -{ - struct spd_set_memclk_result result; - unsigned char cl_at_freq[NBCAP_MEMCLK_MASK + 1]; - int dimm, freq, max_freq_bios, max_freq_dloading, max_freq_1t; - uint32_t value; - - static const uint8_t spd_min_cycle_time_indices[] = { 9, 23, 25 }; - static const unsigned char cycle_time_at_freq[] = { - [NBCAP_MEMCLK_200MHZ] = 0x50, /* 5ns */ - [NBCAP_MEMCLK_166MHZ] = 0x60, /* 6ns */ - [NBCAP_MEMCLK_133MHZ] = 0x75, /* 7.5ns */ - [NBCAP_MEMCLK_100MHZ] = 0xa0, /* 10ns */ - }; - - /* BEWARE that the constants for frequencies order in reverse of what - * would be intuitive. 200 MHz has the lowest constant, 100 MHz the - * highest. Thus, all comparisons and traversal directions having to - * do with frequencies are/have to be the opposite of what would be - * intuitive. - */ - - /* the CLs supported by the controller: */ - memset(cl_at_freq, 0x1c, sizeof(cl_at_freq)); - memset(cl_at_freq, 0x00, - (pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP) >> - NBCAP_MEMCLK_SHIFT) & NBCAP_MEMCLK_MASK); - max_freq_bios = read_option(max_mem_clock, 0); - if (max_freq_bios <= NBCAP_MEMCLK_100MHZ) - memset(cl_at_freq, 0x00, max_freq_bios); - for (dimm = 0; dimm < DIMM_SOCKETS; dimm++) { - int x,i,spd_cls,cl,spd_min_cycle_time; - unsigned char cl_at_freq_mask[sizeof(cl_at_freq)]; - - if (!(dimm_mask & (1 << dimm))) - continue; - /* Byte 18 for DDR SDRAM is interpreted: - * bit 0 == CAS Latency = 1.0 - * bit 1 == CAS Latency = 1.5 - * bit 2 == CAS Latency = 2.0 - * bit 3 == CAS Latency = 2.5 - * bit 4 == CAS Latency = 3.0 - * bit 5 == CAS Latency = 3.5 - * bit 6 == CAS Latency = 4.0 - * bit 7 == TBD - */ - spd_cls = spd_read_byte(ctrl->channel0[dimm], 18); - if (spd_cls <= 0) - goto hw_error; - memset(cl_at_freq_mask, 0x00, sizeof(cl_at_freq_mask)); - for (cl = 1 << log2(spd_cls), i = 0; i < 3; cl >>= 1, i++) { - if (!(spd_cls & cl)) - continue; - spd_min_cycle_time = spd_read_byte(ctrl->channel0[dimm], - spd_min_cycle_time_indices[i]); - if (spd_min_cycle_time < 0) - goto hw_error; - if ((!spd_min_cycle_time) || (spd_min_cycle_time & 0x0f) > 9) - continue; - for (x = 0; x < sizeof(cl_at_freq_mask); x++) - if (cycle_time_at_freq[x] >= spd_min_cycle_time) - cl_at_freq_mask[x] |= cl; - } - for (x = 0; x < sizeof(cl_at_freq_mask); x++) - cl_at_freq[x] &= cl_at_freq_mask[x]; - } - - freq = NBCAP_MEMCLK_200MHZ; - while (freq < sizeof(cl_at_freq) && !cl_at_freq[freq]) - freq++; - - max_freq_dloading = spd_dimm_loading_socket(ctrl, dimm_mask, &max_freq_1t); - if (max_freq_dloading > freq) { - printk(BIOS_WARNING, "Memory speed reduced due to signal loading conditions\n"); - freq = max_freq_dloading; - while (freq < sizeof(cl_at_freq) && !cl_at_freq[freq]) - freq++; - } - - /* if the next lower frequency gives a CL at least one whole cycle - * shorter, select that (see end of BKDG 4.1.1.1) */ - if (freq < sizeof(cl_at_freq)-1 && cl_at_freq[freq+1] && - __ffs(cl_at_freq[freq]) - __ffs(cl_at_freq[freq+1]) >= 2) - freq++; - - if (freq == sizeof(cl_at_freq)) - goto hw_error; - -#if IS_ENABLED(CONFIG_CPU_AMD_SOCKET_754) - if (freq < max_freq_1t || CONFIG_K8_FORCE_2T_DRAM_TIMING) { - pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, - pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW) | DCL_En2T); - } -#endif - - result.param = get_mem_param(freq); - - /* Update DRAM Config High with our selected memory speed */ - value = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); - value &= ~(DCH_MEMCLK_MASK << DCH_MEMCLK_SHIFT); - - value |= result.param->dch_memclk; - pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, value); - - static const unsigned latencies[] = { DTL_CL_2, DTL_CL_2_5, DTL_CL_3 }; - - /* Update DRAM Timing Low with our selected cas latency */ - value = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); - value &= ~(DTL_TCL_MASK << DTL_TCL_SHIFT); - value |= latencies[__ffs(cl_at_freq[freq]) - 2] << DTL_TCL_SHIFT; - pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, value); - - result.dimm_mask = dimm_mask; - return result; - hw_error: - result.param = (const struct mem_param *)0; - result.dimm_mask = -1; - return result; -} - - -static int update_dimm_Trc(const struct mem_controller *ctrl, const struct mem_param *param, int i) -{ - unsigned clocks, old_clocks; - uint32_t dtl; - int value; - value = spd_read_byte(ctrl->channel0[i], 41); - if (value < 0) return -1; - if ((value == 0) || (value == 0xff)) { - value = param->tRC; - } - clocks = CEIL_DIV((value << 1), param->divisor); - if (clocks < DTL_TRC_MIN) { - clocks = DTL_TRC_MIN; - } - if (clocks > DTL_TRC_MAX) { - return 0; - } - - dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); - old_clocks = ((dtl >> DTL_TRC_SHIFT) & DTL_TRC_MASK) + DTL_TRC_BASE; - if (old_clocks > clocks) { - clocks = old_clocks; - } - dtl &= ~(DTL_TRC_MASK << DTL_TRC_SHIFT); - dtl |= ((clocks - DTL_TRC_BASE) << DTL_TRC_SHIFT); - pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); - return 1; -} - -static int update_dimm_Trfc(const struct mem_controller *ctrl, const struct mem_param *param, int i) -{ - unsigned clocks, old_clocks; - uint32_t dtl; - int value; - value = spd_read_byte(ctrl->channel0[i], 42); - if (value < 0) return -1; - if ((value == 0) || (value == 0xff)) { - value = param->tRFC; - } - clocks = CEIL_DIV((value << 1), param->divisor); - if (clocks < DTL_TRFC_MIN) { - clocks = DTL_TRFC_MIN; - } - if (clocks > DTL_TRFC_MAX) { - return 0; - } - dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); - old_clocks = ((dtl >> DTL_TRFC_SHIFT) & DTL_TRFC_MASK) + DTL_TRFC_BASE; - if (old_clocks > clocks) { - clocks = old_clocks; - } - dtl &= ~(DTL_TRFC_MASK << DTL_TRFC_SHIFT); - dtl |= ((clocks - DTL_TRFC_BASE) << DTL_TRFC_SHIFT); - pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); - return 1; -} - - -static int update_dimm_Trcd(const struct mem_controller *ctrl, const struct mem_param *param, int i) -{ - unsigned clocks, old_clocks; - uint32_t dtl; - int value; - value = spd_read_byte(ctrl->channel0[i], 29); - if (value < 0) return -1; - clocks = CEIL_DIV(value, (param->divisor << 1)); - if (clocks < DTL_TRCD_MIN) { - clocks = DTL_TRCD_MIN; - } - if (clocks > DTL_TRCD_MAX) { - return 0; - } - dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); - old_clocks = ((dtl >> DTL_TRCD_SHIFT) & DTL_TRCD_MASK) + DTL_TRCD_BASE; - if (old_clocks > clocks) { - clocks = old_clocks; - } - dtl &= ~(DTL_TRCD_MASK << DTL_TRCD_SHIFT); - dtl |= ((clocks - DTL_TRCD_BASE) << DTL_TRCD_SHIFT); - pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); - return 1; -} - -static int update_dimm_Trrd(const struct mem_controller *ctrl, const struct mem_param *param, int i) -{ - unsigned clocks, old_clocks; - uint32_t dtl; - int value; - value = spd_read_byte(ctrl->channel0[i], 28); - if (value < 0) return -1; - clocks = CEIL_DIV(value, (param->divisor << 1)); - if (clocks < DTL_TRRD_MIN) { - clocks = DTL_TRRD_MIN; - } - if (clocks > DTL_TRRD_MAX) { - return 0; - } - dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); - old_clocks = ((dtl >> DTL_TRRD_SHIFT) & DTL_TRRD_MASK) + DTL_TRRD_BASE; - if (old_clocks > clocks) { - clocks = old_clocks; - } - dtl &= ~(DTL_TRRD_MASK << DTL_TRRD_SHIFT); - dtl |= ((clocks - DTL_TRRD_BASE) << DTL_TRRD_SHIFT); - pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); - return 1; -} - -static int update_dimm_Tras(const struct mem_controller *ctrl, const struct mem_param *param, int i) -{ - unsigned clocks, old_clocks; - uint32_t dtl; - int value; - value = spd_read_byte(ctrl->channel0[i], 30); - if (value < 0) return -1; - clocks = CEIL_DIV((value << 1), param->divisor); - if (clocks < DTL_TRAS_MIN) { - clocks = DTL_TRAS_MIN; - } - if (clocks > DTL_TRAS_MAX) { - return 0; - } - dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); - old_clocks = ((dtl >> DTL_TRAS_SHIFT) & DTL_TRAS_MASK) + DTL_TRAS_BASE; - if (old_clocks > clocks) { - clocks = old_clocks; - } - dtl &= ~(DTL_TRAS_MASK << DTL_TRAS_SHIFT); - dtl |= ((clocks - DTL_TRAS_BASE) << DTL_TRAS_SHIFT); - pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); - return 1; -} - -static int update_dimm_Trp(const struct mem_controller *ctrl, const struct mem_param *param, int i) -{ - unsigned clocks, old_clocks; - uint32_t dtl; - int value; - value = spd_read_byte(ctrl->channel0[i], 27); - if (value < 0) return -1; - clocks = CEIL_DIV(value, (param->divisor << 1)); - if (clocks < DTL_TRP_MIN) { - clocks = DTL_TRP_MIN; - } - if (clocks > DTL_TRP_MAX) { - return 0; - } - dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); - old_clocks = ((dtl >> DTL_TRP_SHIFT) & DTL_TRP_MASK) + DTL_TRP_BASE; - if (old_clocks > clocks) { - clocks = old_clocks; - } - dtl &= ~(DTL_TRP_MASK << DTL_TRP_SHIFT); - dtl |= ((clocks - DTL_TRP_BASE) << DTL_TRP_SHIFT); - pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); - return 1; -} - -static void set_Twr(const struct mem_controller *ctrl, const struct mem_param *param) -{ - uint32_t dtl; - dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); - dtl &= ~(DTL_TWR_MASK << DTL_TWR_SHIFT); - dtl |= (param->dtl_twr - DTL_TWR_BASE) << DTL_TWR_SHIFT; - pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); -} - - -static void init_Tref(const struct mem_controller *ctrl, const struct mem_param *param) -{ - uint32_t dth; - dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); - dth &= ~(DTH_TREF_MASK << DTH_TREF_SHIFT); - dth |= (param->dch_tref4k << DTH_TREF_SHIFT); - pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); -} - -static int update_dimm_Tref(const struct mem_controller *ctrl, const struct mem_param *param, int i) -{ - uint32_t dth; - int value; - unsigned tref, old_tref; - value = spd_read_byte(ctrl->channel0[i], 3); - if (value < 0) return -1; - value &= 0xf; - - tref = param->dch_tref8k; - if (value == 12) { - tref = param->dch_tref4k; - } - - dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); - old_tref = (dth >> DTH_TREF_SHIFT) & DTH_TREF_MASK; - if ((value == 12) && (old_tref == param->dch_tref4k)) { - tref = param->dch_tref4k; - } else { - tref = param->dch_tref8k; - } - dth &= ~(DTH_TREF_MASK << DTH_TREF_SHIFT); - dth |= (tref << DTH_TREF_SHIFT); - pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); - return 1; -} - - -static int update_dimm_x4(const struct mem_controller *ctrl, const struct mem_param *param, int i) -{ - uint32_t dcl; - int value; -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - int rank; -#endif - int dimm; - value = spd_read_byte(ctrl->channel0[i], 13); - if (value < 0) { - return -1; - } - -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - rank = spd_read_byte(ctrl->channel0[i], 5); /* number of physical banks */ - if (rank < 0) { - return -1; - } -#endif - - dimm = 1<<(DCL_x4DIMM_SHIFT+i); -#if IS_ENABLED(CONFIG_QRANK_DIMM_SUPPORT) - if (rank == 4) { - dimm |= 1<<(DCL_x4DIMM_SHIFT+i+2); - } -#endif - dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); - dcl &= ~dimm; - if (value == 4) { - dcl |= dimm; - } - pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); - return 1; -} - -static int update_dimm_ecc(const struct mem_controller *ctrl, const struct mem_param *param, int i) -{ - uint32_t dcl; - int value; - value = spd_read_byte(ctrl->channel0[i], 11); - if (value < 0) { - return -1; - } - if (value != 2) { - dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); - dcl &= ~DCL_DimmEccEn; - pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); - } - return 1; -} - -static int count_dimms(const struct mem_controller *ctrl) -{ - int dimms; - unsigned index; - dimms = 0; - for (index = 0; index < 8; index += 2) { - uint32_t csbase; - csbase = pci_read_config32(ctrl->f2, (DRAM_CSBASE + (index << 2))); - if (csbase & 1) { - dimms += 1; - } - } - return dimms; -} - -static void set_Twtr(const struct mem_controller *ctrl, const struct mem_param *param) -{ - uint32_t dth; - - dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); - dth &= ~(DTH_TWTR_MASK << DTH_TWTR_SHIFT); - dth |= ((param->dtl_twtr - DTH_TWTR_BASE) << DTH_TWTR_SHIFT); - pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); -} - -static void set_Trwt(const struct mem_controller *ctrl, const struct mem_param *param) -{ - uint32_t dth, dtl; - unsigned latency; - unsigned clocks; - int lat, mtype; - - clocks = 0; - dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); - latency = (dtl >> DTL_TCL_SHIFT) & DTL_TCL_MASK; - - if (is_opteron(ctrl)) { - mtype = 0; /* dual channel */ - } else if (is_registered(ctrl)) { - mtype = 1; /* registered 64bit interface */ - } else { - mtype = 2; /* unbuffered 64bit interface */ - } - - switch (latency) { - case DTL_CL_2: - lat = 0; - break; - case DTL_CL_2_5: - lat = 1; - break; - case DTL_CL_3: - lat = 2; - break; - default: - die("Unknown LAT for Trwt"); - } - - clocks = param->dtl_trwt[lat][mtype]; - if ((clocks < DTH_TRWT_MIN) || (clocks > DTH_TRWT_MAX)) { - die("Unknown Trwt\n"); - } - - dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); - dth &= ~(DTH_TRWT_MASK << DTH_TRWT_SHIFT); - dth |= ((clocks - DTH_TRWT_BASE) << DTH_TRWT_SHIFT); - pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); - return; -} - -static void set_Twcl(const struct mem_controller *ctrl, const struct mem_param *param) -{ - /* Memory Clocks after CAS# */ - uint32_t dth; - unsigned clocks; - if (is_registered(ctrl)) { - clocks = 2; - } else { - clocks = 1; - } - dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); - dth &= ~(DTH_TWCL_MASK << DTH_TWCL_SHIFT); - dth |= ((clocks - DTH_TWCL_BASE) << DTH_TWCL_SHIFT); - pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); -} - - -static void set_read_preamble(const struct mem_controller *ctrl, const struct mem_param *param) -{ - uint32_t dch; - unsigned rdpreamble; - int slots, i; - - slots = 0; - - for (i = 0; i < 4; i++) { - if (ctrl->channel0[i]) { - slots += 1; - } - } - - /* map to index to param.rdpreamble array */ - if (is_registered(ctrl)) { - i = 0; - } else if (slots < 3) { - i = 1; - } else if (slots == 3) { - i = 2; - } else if (slots == 4) { - i = 3; - } else { - die("Unknown rdpreamble for this nr of slots"); - } - - dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); - dch &= ~(DCH_RDPREAMBLE_MASK << DCH_RDPREAMBLE_SHIFT); - rdpreamble = param->rdpreamble[i]; - - if ((rdpreamble < DCH_RDPREAMBLE_MIN) || (rdpreamble > DCH_RDPREAMBLE_MAX)) { - die("Unknown rdpreamble"); - } - - dch |= (rdpreamble - DCH_RDPREAMBLE_BASE) << DCH_RDPREAMBLE_SHIFT; - pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); -} - -static void set_max_async_latency(const struct mem_controller *ctrl, const struct mem_param *param) -{ - uint32_t dch; - unsigned async_lat; - int dimms; - - dimms = count_dimms(ctrl); - - dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); - dch &= ~(DCH_ASYNC_LAT_MASK << DCH_ASYNC_LAT_SHIFT); - async_lat = 0; - if (is_registered(ctrl)) { - if (dimms == 4) { - /* 9ns */ - async_lat = 9; - } - else { - /* 8ns */ - async_lat = 8; - } - } - else { - if (dimms > 3) { - die("Too many unbuffered dimms"); - } - else if (dimms == 3) { - /* 7ns */ - async_lat = 7; - } - else { - /* 6ns */ - async_lat = 6; - } - } - dch |= ((async_lat - DCH_ASYNC_LAT_BASE) << DCH_ASYNC_LAT_SHIFT); - pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); -} - -static void set_idle_cycle_limit(const struct mem_controller *ctrl, const struct mem_param *param) -{ - uint32_t dch; - /* AMD says to Hardcode this */ - dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); - dch &= ~(DCH_IDLE_LIMIT_MASK << DCH_IDLE_LIMIT_SHIFT); - dch |= DCH_IDLE_LIMIT_16 << DCH_IDLE_LIMIT_SHIFT; - dch |= DCH_DYN_IDLE_CTR_EN; - pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); -} - -static long spd_set_dram_timing(const struct mem_controller *ctrl, const struct mem_param *param, long dimm_mask) -{ - int i; - - init_Tref(ctrl, param); - for (i = 0; i < DIMM_SOCKETS; i++) { - int rc; - if (!(dimm_mask & (1 << i))) { - continue; - } - /* DRAM Timing Low Register */ - if ((rc = update_dimm_Trc (ctrl, param, i)) <= 0) goto dimm_err; - if ((rc = update_dimm_Trfc(ctrl, param, i)) <= 0) goto dimm_err; - if ((rc = update_dimm_Trcd(ctrl, param, i)) <= 0) goto dimm_err; - if ((rc = update_dimm_Trrd(ctrl, param, i)) <= 0) goto dimm_err; - if ((rc = update_dimm_Tras(ctrl, param, i)) <= 0) goto dimm_err; - if ((rc = update_dimm_Trp (ctrl, param, i)) <= 0) goto dimm_err; - - /* DRAM Timing High Register */ - if ((rc = update_dimm_Tref(ctrl, param, i)) <= 0) goto dimm_err; - - - /* DRAM Config Low */ - if ((rc = update_dimm_x4 (ctrl, param, i)) <= 0) goto dimm_err; - if ((rc = update_dimm_ecc(ctrl, param, i)) <= 0) goto dimm_err; - continue; - dimm_err: - if (rc < 0) { - return -1; - } - dimm_mask = disable_dimm(ctrl, i, dimm_mask); - } - /* DRAM Timing Low Register */ - set_Twr(ctrl, param); - - /* DRAM Timing High Register */ - set_Twtr(ctrl, param); - set_Trwt(ctrl, param); - set_Twcl(ctrl, param); - - /* DRAM Config High */ - set_read_preamble(ctrl, param); - set_max_async_latency(ctrl, param); - set_idle_cycle_limit(ctrl, param); - return dimm_mask; -} - -#if IS_ENABLED(CONFIG_RAMINIT_SYSINFO) -void sdram_set_spd_registers(const struct mem_controller *ctrl, struct sys_info *sysinfo) -#else -void sdram_set_spd_registers(const struct mem_controller *ctrl) -#endif -{ - struct spd_set_memclk_result result; - const struct mem_param *param; - long dimm_mask; -#if 1 - if (!controller_present(ctrl)) { - return; - } -#endif - hw_enable_ecc(ctrl); - activate_spd_rom(ctrl); - dimm_mask = spd_detect_dimms(ctrl); - if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) { - printk(BIOS_DEBUG, "No memory for this cpu\n"); - return; - } - dimm_mask = spd_enable_2channels(ctrl, dimm_mask); - if (dimm_mask < 0) - goto hw_spd_err; - dimm_mask = spd_set_ram_size(ctrl , dimm_mask); - if (dimm_mask < 0) - goto hw_spd_err; - dimm_mask = spd_handle_unbuffered_dimms(ctrl, dimm_mask); - if (dimm_mask < 0) - goto hw_spd_err; - result = spd_set_memclk(ctrl, dimm_mask); - param = result.param; - dimm_mask = result.dimm_mask; - if (dimm_mask < 0) - goto hw_spd_err; - dimm_mask = spd_set_dram_timing(ctrl, param , dimm_mask); - if (dimm_mask < 0) - goto hw_spd_err; - order_dimms(ctrl); - return; - hw_spd_err: - /* Unrecoverable error reading SPD data */ - printk(BIOS_ERR, "SPD error - reset\n"); - hard_reset(); - return; -} - -#if CONFIG_HW_MEM_HOLE_SIZEK != 0 -static uint32_t hoist_memory(int controllers, const struct mem_controller *ctrl,unsigned hole_startk, int i) -{ - int ii; - uint32_t carry_over; - pci_devfn_t dev; - uint32_t base, limit; - uint32_t basek; - uint32_t hoist; - int j; - - carry_over = (4*1024*1024) - hole_startk; - - for (ii = controllers - 1; ii > i; ii--) { - base = pci_read_config32(ctrl[0].f1, 0x40 + (ii << 3)); - if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { - continue; - } - limit = pci_read_config32(ctrl[0].f1, 0x44 + (ii << 3)); - for (j = 0; j < controllers; j++) { - pci_write_config32(ctrl[j].f1, 0x44 + (ii << 3), limit + (carry_over << 2)); - pci_write_config32(ctrl[j].f1, 0x40 + (ii << 3), base + (carry_over << 2)); - } - } - limit = pci_read_config32(ctrl[0].f1, 0x44 + (i << 3)); - for (j = 0; j < controllers; j++) { - pci_write_config32(ctrl[j].f1, 0x44 + (i << 3), limit + (carry_over << 2)); - } - dev = ctrl[i].f1; - base = pci_read_config32(dev, 0x40 + (i << 3)); - basek = (base & 0xffff0000) >> 2; - if (basek == hole_startk) { - //don't need set memhole here, because hole off set will be 0, overflow - //so need to change base reg instead, new basek will be 4*1024*1024 - base &= 0x0000ffff; - base |= (4*1024*1024)<<2; - for (j = 0; j < controllers; j++) { - pci_write_config32(ctrl[j].f1, 0x40 + (i<<3), base); - } - } - else { - hoist = /* hole start address */ - ((hole_startk << 10) & 0xff000000) + - /* hole address to memory controller address */ - (((basek + carry_over) >> 6) & 0x0000ff00) + - /* enable */ - 1; - pci_write_config32(dev, 0xf0, hoist); - } - - return carry_over; -} - -void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl) -{ - - uint32_t hole_startk; - int i; - - hole_startk = 4*1024*1024 - CONFIG_HW_MEM_HOLE_SIZEK; - - printk(BIOS_SPEW, "Handling memory hole at 0x%08x (default)\n", hole_startk); -#if IS_ENABLED(CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC) - /* We need to double check if hole_startk is valid. - * If it is equal to the dram base address in K (base_k), - * we need to decrease it. - */ - uint32_t basek_pri; - for (i = 0; i < controllers; i++) { - uint32_t base; - unsigned base_k; - base = pci_read_config32(ctrl[0].f1, 0x40 + (i << 3)); - if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { - continue; - } - base_k = (base & 0xffff0000) >> 2; - if (base_k == hole_startk) { - /* decrease memory hole startk to make sure it is - * in the middle of the previous node - */ - hole_startk -= (base_k - basek_pri)>>1; - break; /* only one hole */ - } - basek_pri = base_k; - } - - printk(BIOS_SPEW, "Handling memory hole at 0x%08x (adjusted)\n", hole_startk); -#endif - /* Find node number that needs the memory hole configured */ - for (i = 0; i < controllers; i++) { - uint32_t base, limit; - unsigned base_k, limit_k; - base = pci_read_config32(ctrl[0].f1, 0x40 + (i << 3)); - if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { - continue; - } - limit = pci_read_config32(ctrl[0].f1, 0x44 + (i << 3)); - base_k = (base & 0xffff0000) >> 2; - limit_k = ((limit + 0x00010000) & 0xffff0000) >> 2; - if ((base_k <= hole_startk) && (limit_k > hole_startk)) { - unsigned end_k; - hoist_memory(controllers, ctrl, hole_startk, i); - end_k = memory_end_k(ctrl, controllers); - set_top_mem(end_k, hole_startk); - break; /* only one hole */ - } - } - -} - -#endif - -#if IS_ENABLED(CONFIG_RAMINIT_SYSINFO) -void sdram_enable(int controllers, const struct mem_controller *ctrl, struct sys_info *sysinfo) -#else -void sdram_enable(int controllers, const struct mem_controller *ctrl) -#endif -{ - int i; - u32 whatWait = 0; - int suspend = acpi_is_wakeup_s3(); - - /* Error if I don't have memory */ - if (memory_end_k(ctrl, controllers) == 0) { - die("No memory\n"); - } - - /* Before enabling memory start the memory clocks */ - for (i = 0; i < controllers; i++) { - uint32_t dch; - if (!controller_present(ctrl + i)) - continue; - dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH); - if (dch & (DCH_MEMCLK_EN0|DCH_MEMCLK_EN1|DCH_MEMCLK_EN2|DCH_MEMCLK_EN3)) { - dch |= DCH_MEMCLK_VALID; - pci_write_config32(ctrl[i].f2, DRAM_CONFIG_HIGH, dch); - } - else { - /* Disable dram receivers */ - uint32_t dcl; - dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); - dcl |= DCL_DisInRcvrs; - pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl); - } - } - - /* We need to wait a minimum of 20 MEMCLKS to enable the InitDram */ - /* And if necessary toggle the the reset on the dimms by hand */ - memreset(controllers, ctrl); - - for (i = 0; i < controllers; i++) { - uint32_t dcl, dch; - if (!controller_present(ctrl + i)) - continue; - /* Skip everything if I don't have any memory on this controller */ - dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH); - if (!(dch & DCH_MEMCLK_VALID)) { - continue; - } - - /* Toggle DisDqsHys to get it working */ - dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); - if (dcl & DCL_DimmEccEn) { - uint32_t mnc; - printk(BIOS_SPEW, "ECC enabled\n"); - mnc = pci_read_config32(ctrl[i].f3, MCA_NB_CONFIG); - mnc |= MNC_ECC_EN; - if (dcl & DCL_128BitEn) { - mnc |= MNC_CHIPKILL_EN; - } - pci_write_config32(ctrl[i].f3, MCA_NB_CONFIG, mnc); - } - - if (!suspend) { - dcl |= DCL_DisDqsHys; - pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl); - } - dcl &= ~DCL_DisDqsHys; - dcl &= ~DCL_DLL_Disable; - dcl &= ~DCL_D_DRV; - dcl &= ~DCL_QFC_EN; - - if (suspend) { - enable_lapic(); - init_timer(); - dcl |= (DCL_ESR | DCL_SRS); - /* Handle errata 85 Insufficient Delay Between MEMCLK Startup - and CKE Assertion During Resume From S3 */ - udelay(10); /* for unregistered */ - if (is_registered(&ctrl[i])) { - udelay(100); /* 110us for registered (we wait 10us already) */ - } - whatWait = DCL_ESR; - } else { - dcl |= DCL_DramInit; - whatWait = DCL_DramInit; - } - pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl); - } - - for (i = 0; i < controllers; i++) { - uint32_t dcl, dch; - if (!controller_present(ctrl + i)) - continue; - /* Skip everything if I don't have any memory on this controller */ - dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH); - if (!(dch & DCH_MEMCLK_VALID)) { - continue; - } - - printk(BIOS_DEBUG, "Initializing memory: "); - int loops = 0; - do { - dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); - loops++; - if ((loops & 1023) == 0) { - printk(BIOS_DEBUG, "."); - } - } while (((dcl & whatWait) != 0) && (loops < TIMEOUT_LOOPS)); - if (loops >= TIMEOUT_LOOPS) { - printk(BIOS_DEBUG, " failed\n"); - continue; - } - - if (!is_cpu_pre_c0()) { - /* Wait until it is safe to touch memory */ - do { - dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); - } while (((dcl & DCL_MemClrStatus) == 0) || ((dcl & DCL_DramEnable) == 0) || - ((dcl & DCL_SRS))); - } - - printk(BIOS_DEBUG, " done\n"); - } - -#if CONFIG_HW_MEM_HOLE_SIZEK != 0 - // init hw mem hole here - /* DramHoleValid bit only can be set after MemClrStatus is set by Hardware */ - if (!is_cpu_pre_e0()) - set_hw_mem_hole(controllers, ctrl); -#endif - - //FIXME add enable node interleaving here -- yhlu - /*needed? - 1. check how many nodes we have , if not all has RAM installed get out - 2. check cs_base lo is 0, node 0 f2 0x40,,,,, if any one is not using lo is CS_BASE, get out - 3. check if other node is the same as node 0 about f2 0x40,,,,, otherwise get out - 4. if all ready enable node_interleaving in f1 0x40..... of every node - 5. for node interleaving we need to set mem hole to every node (need recalcute hole offset in f0 for every node) - */ - -} - -void set_sysinfo_in_ram(unsigned val) -{ -} - -void fill_mem_ctrl(int controllers, struct mem_controller *ctrl_a, - const uint16_t *spd_addr) -{ - int i; - int j; - struct mem_controller *ctrl; - for (i = 0; i < controllers; i++) { - ctrl = &ctrl_a[i]; - ctrl->node_id = i; - ctrl->f0 = PCI_DEV(0, 0x18+i, 0); - ctrl->f1 = PCI_DEV(0, 0x18+i, 1); - ctrl->f2 = PCI_DEV(0, 0x18+i, 2); - ctrl->f3 = PCI_DEV(0, 0x18+i, 3); - - if (spd_addr == (void *)0) continue; - - for (j = 0; j < DIMM_SOCKETS; j++) { - ctrl->channel0[j] = spd_addr[(i*2+0)*DIMM_SOCKETS + j]; - ctrl->channel1[j] = spd_addr[(i*2+1)*DIMM_SOCKETS + j]; - } - } -} |