This patch adds support for the AMD LX cpu.

There is one global change to pci_ids.h. The rest are changes for LX. I
ran abuild and it is ok.  Not all artec design changes are included as
some of them would adversely affect other mainboards. Indrek will need
to test.


Signed-off-by: Ron Minnich
Signed-off-by: Indrek Kruusa, indrek.kruusa@artecdesign.ee, artec
design. 


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2350 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 143 insertions, 0 deletions

diff --git a/src/northbridge/amd/lx/raminit.c b/src/northbridge/amd/lx/raminit.c
new file mode 100644
index 0000000000..7fd39ae22e
--- /dev/null
+++ b/src/northbridge/amd/lx/raminit.c
@@ -0,0 +1,143 @@
+#include <cpu/amd/lxdef.h>
+
+#if 0
+static void sdram_set_registers(const struct mem_controller *ctrl)
+{
+}
+
+#endif
+
+
+/* Section 6.1.3, LX processor databooks, BIOS Initialization Sequence
+ * Section 4.1.4, GX/CS5535 GeodeROM Porting guide */
+static void sdram_enable(int controllers, const struct mem_controller *ctrl)
+{
+	int i;
+	msr_t msr;
+
+	/* DRAM initialization sequence according to the documentation:
+	 * 1)  Initialize the following GLMC registers/bits based on Serial Presence Detect (SPD) values:
+	 *  — MSR 20000018h except REF_INT bits [23:8]
+   	 *   — MSR 20000019h
+   	 */
+   	
+   		// This is done by sdram_set_spd_registers()
+		/*WR_MSR   MC_CF07_DATA,   DIMMCONFIG, 0x05000040
+
+		;WR_MSR	MC_CF07_DATA,   DIMMCONFIG, 0x00000040		; MSR 20000018h except REF_INT bits [23:8]. REF_STAG value from DOCS*/
+		
+	/*
+	 * 0x18000100 : 0x696332A3
+	 * 
+	 * 		63 - 32 | 31                  15                0
+	 * xxxxxxx		| 0110 1001 0110 0011 0011 0010 1010 0011
+	 * 
+	 *  30:28 CAS latency
+	 * 
+	 * 010 - 2.0
+	 * 110 - 2.5
+	 *
+	 */
+
+	msr.hi = 0x18000100;
+	msr.lo = 0x696332A3;
+	wrmsr(MC_CF8F_DATA, msr);
+
+	/* 2)  Initialize the following GLMC registers:
+	 *	— MSR 2000001Ah[15:8] = C8h
+	 *	— MSR 20002004h[2] = 0, [0] = 1
+	 */
+	msr.hi = 0x00000000;
+	msr.lo = 0x130AD101;
+	wrmsr(MC_CF1017_DATA, msr);
+
+	msr.hi = 0x00000000;
+	msr.lo = 0x00000001;
+	wrmsr(MC_GLD_MSR_PM, msr);
+
+	/* 3) Release MASK_CKE[1:0] (MSR 2000001Dh[9:8] = 11) */
+
+	msr.hi = 0x00000000;
+	msr.lo = 0x00001000;
+	wrmsr(MC_CFCLK_DBUG, msr);
+	
+	//print_debug("sdram_enable step 3\r\n");
+
+	/* 4. set and clear REF_TST 16 times, more shouldn't hurt
+	 * why this is before EMRS and MRS ? */
+	 
+	for (i = 0; i < 19; i++) {
+		msr = rdmsr(MC_CF07_DATA);
+		msr.lo |=  (0x01 << 3);
+		wrmsr(MC_CF07_DATA, msr);
+		msr.lo &= ~(0x01 << 3);
+		wrmsr(MC_CF07_DATA, msr);
+	}
+
+
+	/* 5) Initialize REF_INT (MSR 20000018h[23:8]) to set refresh interval.	*/
+	msr.lo |= 0x2B00;
+	wrmsr(MC_CF07_DATA, msr);
+
+
+
+	/* set refresh staggering to 4 SDRAM clocks */
+	msr = rdmsr(0x20000018);
+	msr.lo &= ~(0x03 << 6);
+	msr.lo |=  (0x00 << 6);
+	wrmsr(0x20000018, msr);
+	//print_debug("sdram_enable step 5\r\n");
+
+
+	/* 6) Perform load-mode with MSR_BA = 01 (MSR 200000018h[29:28] = 01) 
+	 * to initialize DIMM Extended Mode register. 
+	 * Load-mode is performed by setting/clearing PROG_DRAM (MSR 200000018h[0]).
+	 */
+	msr.lo |=  ((0x01 << 28) | 0x01);
+	wrmsr(MC_CF07_DATA, msr);
+
+	msr.lo &= ~((0x01 << 28) | 0x01);
+	wrmsr(MC_CF07_DATA, msr);
+
+
+	/* 7. Reset DLL, Bit 27 is undocumented in GX datasheet,
+	 * it is documented in LX datasheet  */	
+	/* load Mode Register by set and clear PROG_DRAM */
+	msr = rdmsr(MC_CF07_DATA);
+	msr.lo |=  ((0x01 << 27) | 0x01);
+	wrmsr(MC_CF07_DATA, msr);
+	msr.lo &= ~((0x01 << 27) | 0x01);
+	wrmsr(MC_CF07_DATA, msr);
+	//print_debug("sdram_enable step 7\r\n");
+
+
+	/* 8. load Mode Register by set and clear PROG_DRAM */
+	msr = rdmsr(MC_CF07_DATA);
+	msr.lo |=  0x01;
+	wrmsr(MC_CF07_DATA, msr);
+	msr.lo &= ~0x01;
+	wrmsr(MC_CF07_DATA, msr);
+	//print_debug("sdram_enable step 8\r\n");
+
+	/* wait 200 SDCLKs */
+	for (i = 0; i < 200; i++)
+		outb(0xaa, 0x80);
+
+	/* load RDSYNC */
+	/*msr = rdmsr(0x2000001f);
+	msr.hi = 0x000ff310;
+	msr.lo = 0x00000000;
+	wrmsr(0x2000001f, msr);*/
+
+	/* set delay control */
+	msr = rdmsr(0x4c00000f);
+	msr.hi = 0x830d415a;
+	msr.lo = 0x8ea0ad6a;
+	wrmsr(0x4c00000f, msr);
+
+
+	print_debug("DRAM controller init done.\r\n");
+
+	/* DRAM working now?? */
+
+}