nb/intel/gm45: Use a common romstage

This moves a lot of the common romstage boilerplate code to a common
location, while adding a few mainboard specific hooks.

Another difference is that the settings for enable_igd and enable_peg
are now based on the static devicetree settings.

Change-Id: I30ef7f6962aabde78b5c40e0b53bb85e01c254c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/31190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

1 files changed, 135 insertions, 0 deletions

diff --git a/src/northbridge/intel/gm45/romstage.c b/src/northbridge/intel/gm45/romstage.c
new file mode 100644
index 0000000000..6d652bb8d8
--- /dev/null
+++ b/src/northbridge/intel/gm45/romstage.c
@@ -0,0 +1,135 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2011 The ChromiumOS Authors.  All rights reserved.
+ * Copyright (C) 2014 Vladimir Serbinenko
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <cbmem.h>
+#include <romstage_handoff.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <arch/acpi.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/x86/bist.h>
+#include <cpu/intel/romstage.h>
+#include <northbridge/intel/gm45/gm45.h>
+#include <southbridge/intel/i82801ix/i82801ix.h>
+#include <southbridge/intel/common/gpio.h>
+
+#define LPC_DEV PCI_DEV(0, 0x1f, 0)
+#define MCH_DEV PCI_DEV(0, 0, 0)
+
+void __weak mb_setup_superio(void)
+{
+}
+
+void __weak mb_pre_raminit_setup(sysinfo_t *sysinfo)
+{
+}
+
+void __weak mb_post_raminit_setup(void)
+{
+}
+
+/* Platform has no romstage entry point under mainboard directory,
+ * so this one is named with prefix mainboard.
+ */
+void mainboard_romstage_entry(unsigned long bist)
+{
+	sysinfo_t sysinfo;
+	int s3resume = 0;
+	int cbmem_initted;
+	u16 reg16;
+
+	/* basic northbridge setup, including MMCONF BAR */
+	gm45_early_init();
+
+	if (bist == 0)
+		enable_lapic();
+
+	/* First, run everything needed for console output. */
+	i82801ix_early_init();
+	setup_pch_gpios(&mainboard_gpio_map);
+
+	mb_setup_lpc();
+
+	mb_setup_superio();
+
+	console_init();
+	report_bist_failure(bist);
+
+	reg16 = pci_read_config16(LPC_DEV, D31F0_GEN_PMCON_3);
+	pci_write_config16(LPC_DEV, D31F0_GEN_PMCON_3, reg16);
+	if ((MCHBAR16(SSKPD_MCHBAR) == 0xCAFE) && !(reg16 & (1 << 9))) {
+		printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n");
+		gm45_early_reset();
+	}
+
+	/* ASPM related setting, set early by original BIOS. */
+	DMIBAR16(0x204) &= ~(3 << 10);
+
+	/* Check for S3 resume. */
+	const u32 pm1_cnt = inl(DEFAULT_PMBASE + 0x04);
+	if (((pm1_cnt >> 10) & 7) == 5) {
+		if (acpi_s3_resume_allowed()) {
+			printk(BIOS_DEBUG, "Resume from S3 detected.\n");
+			s3resume = 1;
+			/* Clear SLP_TYPE. This will break stage2 but
+			 * we care for that when we get there.
+			 */
+			outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + 0x04);
+		} else {
+			printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n");
+		}
+	}
+
+	/* RAM initialization */
+	enter_raminit_or_reset();
+	memset(&sysinfo, 0, sizeof(sysinfo));
+	get_mb_spd_addrmap(sysinfo.spd_map);
+	const struct device *dev;
+	dev = pcidev_on_root(2, 0);
+	if (dev)
+		sysinfo.enable_igd = dev->enabled;
+	dev = pcidev_on_root(1, 0);
+	if (dev)
+		sysinfo.enable_peg = dev->enabled;
+	get_gmch_info(&sysinfo);
+
+	mb_pre_raminit_setup(&sysinfo);
+
+	raminit(&sysinfo, s3resume);
+
+	mb_post_raminit_setup();
+
+	const u32 deven = pci_read_config32(MCH_DEV, D0F0_DEVEN);
+	/* Disable D4F0 (unknown signal controller). */
+	pci_write_config32(MCH_DEV, D0F0_DEVEN, deven & ~0x4000);
+
+	init_pm(&sysinfo, 0);
+
+	i82801ix_dmi_setup();
+	gm45_late_init(sysinfo.stepping);
+	i82801ix_dmi_poll_vc1();
+
+	MCHBAR16(SSKPD_MCHBAR) = 0xCAFE;
+
+	init_iommu();
+
+	cbmem_initted = !cbmem_recovery(s3resume);
+
+	romstage_handoff_init(cbmem_initted && s3resume);
+
+	printk(BIOS_SPEW, "exit main()\n");
+}