diff options
author | Ronald G. Minnich <rminnich@gmail.com> | 2004-10-06 17:19:49 +0000 |
---|---|---|
committer | Ronald G. Minnich <rminnich@gmail.com> | 2004-10-06 17:19:49 +0000 |
commit | 4fa89208a16e1e2052fff315c76f8f3f07459571 (patch) | |
tree | d7a376040d0f8987832c8e404684c376b4b2fa78 /src/northbridge/intel/i855pm | |
parent | ed9f18d545ffa6e4604eacbf1ce8c68913378ab8 (diff) | |
download | coreboot-4fa89208a16e1e2052fff315c76f8f3f07459571.tar.xz |
f'ing thing still won't work.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1654 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/intel/i855pm')
-rw-r--r-- | src/northbridge/intel/i855pm/raminit.c | 355 |
1 files changed, 171 insertions, 184 deletions
diff --git a/src/northbridge/intel/i855pm/raminit.c b/src/northbridge/intel/i855pm/raminit.c index b95bf48588..5a5992268d 100644 --- a/src/northbridge/intel/i855pm/raminit.c +++ b/src/northbridge/intel/i855pm/raminit.c @@ -19,8 +19,8 @@ /* converted to C 6/2004 yhlu */ #define DEBUG_RAM_CONFIG 1 -#define ASM_CONSOLE_LOGLEVEL 10 -#define dumpnorth() dump_pci_device(PCI_DEV(0, 0, 0)) +#define ASM_CONSOLE_LOGLEVEL 9 +#define dumpnorth() dump_pci_device(PCI_DEV(0, 0, 1)) /* DDR DIMM Mode register Definitions */ @@ -46,6 +46,7 @@ //#define CAS_LATENCY CAS_2_5 //#define CAS_LATENCY CAS_1_5 +/* WOW! this could be bad! sets casl to 2 without checking! */ #define MRS_VALUE (MODE_NORM | CAS_LATENCY | BURST_TYPE | BURST_LENGTH) #define EMRS_VALUE 0x000 @@ -65,7 +66,7 @@ static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t v uint8_t byte; int i; uint32_t result; -#if DEBUG_RAM_CONFIG >= 2 +#if DEBUG_RAM_CONFIG >=2 print_debug("P:"); print_debug_hex8(value); print_debug("\r\n"); @@ -73,12 +74,19 @@ static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t v /* %ecx - initial address to read from */ /* Compute the offset */ dword = value >> 16; - for(i=0;i<8;i++) { + // for(i=0;i<4;i++) { + for(i=0;i<1;i++) { /* Set the ram command */ - byte = pci_read_config8(ctrl->d0, 0x7c); + byte = pci_read_config8(ctrl->d0, 0x70); byte &= 0x8f; byte |= (uint8_t)(value & 0xff); - pci_write_config8(ctrl->d0, 0x7c, byte); +#if DEBUG_RAM_CONFIG + print_debug("R:"); + print_debug_hex8(byte); + print_debug("\r\n"); +#endif + + pci_write_config8(ctrl->d0, 0x70, byte); /* Assert the command to the memory */ #if DEBUG_RAM_CONFIG >= 2 @@ -87,17 +95,19 @@ static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t v print_debug("\r\n"); #endif - result = read32(dword); - + result = read32(dword); + +#if DEBUG_RAM_CONFIG + print_debug("Done\r\n"); +#endif /* Go to the next base address */ - dword += 0x04000000; + dword += 0x0200000; } /* The command has been sent to all dimms so get out */ } - static inline void RAM_CMD(const struct mem_controller *ctrl, uint32_t command, uint32_t offset) { uint32_t value = ((offset) << (MD_SHIFT + 16))|((command << 4) & 0x70) ; do_ram_command(ctrl, value); @@ -116,10 +126,10 @@ static inline void ram_mrs(const struct mem_controller *ctrl, uint32_t value){ /* Read the cas latency setting */ uint8_t byte; uint32_t dword; - byte = pci_read_config8(ctrl->d0, 0x78); + byte = pci_read_config8(ctrl->d0, 0x60); /* Transform it into the form expected by SDRAM */ - dword = ram_cas_latency[(byte>>4) & 3]; - + dword = ram_cas_latency[(byte>>5) & 1]; +#warning RAM_MRS -- using BROKEN hard-wired CAS 2.0. FIX ME SOON value |= (dword<<(16+MD_SHIFT)); value |= (MODE_NORM | BURST_TYPE | BURST_LENGTH) << (16+MD_SHIFT); @@ -131,10 +141,10 @@ static inline void ram_mrs(const struct mem_controller *ctrl, uint32_t value){ static void RAM_NORMAL(const struct mem_controller *ctrl) { uint8_t byte; - byte = pci_read_config8(ctrl->d0, 0x7c); + byte = pci_read_config8(ctrl->d0, 0x70); byte &= 0x8f; byte |= (RAM_COMMAND_NORMAL << 4); - pci_write_config8(ctrl->d0, 0x7c, byte); + pci_write_config8(ctrl->d0, 0x70, byte); } static void RAM_RESET_DDR_PTR(const struct mem_controller *ctrl) { @@ -150,9 +160,9 @@ static void RAM_RESET_DDR_PTR(const struct mem_controller *ctrl) { static void ENABLE_REFRESH(const struct mem_controller *ctrl) { uint32_t dword; - dword = pci_read_config32(ctrl->d0, 0x7c); + dword = pci_read_config32(ctrl->d0, 0x70); dword |= (1 << 29); - pci_write_config32(ctrl->d0, 0x7c, dword); + pci_write_config32(ctrl->d0, 0x70, dword); } /* @@ -279,8 +289,8 @@ static const long register_values[] = { * 10 == Write Only (Writes to DRAM, Reads to memory mapped I/O space) * 11 == Normal (All Access go to DRAM) */ - 0x90, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24), - 0x94, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24), + // 0x90, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24), + //0x94, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24), /* FIXME why was I attempting to set a reserved bit? */ @@ -330,6 +340,8 @@ static const long register_values[] = { * [00:00] DRAM type --hardwired to 1 to indicate DDR */ 0x70, 0xdf0f6c7f, 0, + /* undocumnted shit */ + 0x80, 0, 0xaf0031, }; @@ -347,25 +359,6 @@ static const long register_values[] = { * Which are a triple of configuration regiser, mask, and value. * */ -/* from 1M or 512K */ -#define RCOMP_MMIO 0x100000 - - /* DDR RECOMP table */ - -static const long ddr_rcomp_1[] = { - 0x44332211, 0xc9776655, 0xffffffff, 0xffffffff, - 0x22111111, 0x55444332, 0xfffca876, 0xffffffff, -}; -static const long ddr_rcomp_2[] = { - 0x00000000, 0x76543210, 0xffffeca8, 0xffffffff, - 0x21000000, 0xa8765432, 0xffffffec, 0xffffffff, -}; -static const long ddr_rcomp_3[] = { - 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, - 0x88888888, 0x88888888, 0x88888888, 0x88888888, -}; - -#define rcomp_init_str "Setting RCOMP registers.\r\n" static void write_8dwords(uint32_t src_addr, uint32_t dst_addr) { int i; @@ -382,90 +375,6 @@ static void write_8dwords(uint32_t src_addr, uint32_t dst_addr) { //#define SLOW_DOWN_IO inb(0x80); #define SLOW_DOWN_IO udelay(40); -static void ram_set_rcomp_regs(const struct mem_controller *ctrl) { - uint32_t dword; -#if DEBUG_RAM_CONFIG - print_debug(rcomp_init_str); -#endif - - /*enable access to the rcomp bar */ - /* for e7501 they also set bit 31 ... */ - dword = pci_read_config32(ctrl->d0, 0x0f4); - dword |= 1<<22; - pci_write_config32(ctrl->d0, 0x0f4, dword); - - - /* Set the MMIO address to 512K */ - pci_write_config32(ctrl->d0, 0x14, RCOMP_MMIO); - - dword = read32(RCOMP_MMIO + 0x20); - dword |= (1<<9); - write32(RCOMP_MMIO + 0x20, dword); - -#ifdef NOTNOW - /* Begin to write the RCOMP registers */ - - write8(RCOMP_MMIO + 0x2c, 0xff); - write32(RCOMP_MMIO + 0x30, 0x01040444); - write8(RCOMP_MMIO + 0x34, 0x04); - write32(RCOMP_MMIO + 0x40, 0); - write16(RCOMP_MMIO + 0x44, 0); - write16(RCOMP_MMIO + 0x48, 0); - write16(RCOMP_MMIO + 0x50, 0); - write_8dwords((uint32_t)ddr_rcomp_1, RCOMP_MMIO + 0x60); - write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x80); - write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0xa0); - write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x140); - write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x1c0); - write_8dwords((uint32_t)ddr_rcomp_3, RCOMP_MMIO + 0x180); - -#if 0 /* Print the RCOMP registers */ - movl $RCOMP_MMIO, %ecx -1: movl %ecx, %eax - andb $0x0f, %al - jnz 2f - CONSOLE_INFO_TX_CHAR($'\r') - CONSOLE_INFO_TX_CHAR($'\n') - CONSOLE_INFO_TX_HEX32(%ecx) - CONSOLE_INFO_TX_CHAR($' ') - CONSOLE_INFO_TX_CHAR($'-') - CONSOLE_INFO_TX_CHAR($' ') -2: movl (%ecx), %eax - CONSOLE_INFO_TX_HEX32(%eax) - CONSOLE_INFO_TX_CHAR($' ') - addl $4, %ecx - cmpl $(RCOMP_MMIO + 0x1e0), %ecx - jnz 1b - CONSOLE_INFO_TX_CHAR($'\r') - CONSOLE_INFO_TX_CHAR($'\n') -#endif - - dword = read32(RCOMP_MMIO + 0x20); - dword &= ~(3); - dword |= 1; - write32(RCOMP_MMIO + 0x20, dword); - - /* Wait 40 usec */ - SLOW_DOWN_IO; - - /* unblock updates */ - dword = read32(RCOMP_MMIO + 0x20); - dword &= ~(1<<9); - write32(RCOMP_MMIO+0x20, dword); - dword |= (1<<8); - write32(RCOMP_MMIO+0x20, dword); - dword &= ~(1<<8); - write32(RCOMP_MMIO+0x20, dword); - - /* Wait 40 usec */ - SLOW_DOWN_IO; -#endif - /*disable access to the rcomp bar */ - dword = pci_read_config32(ctrl->d0, 0x0f4); - dword &= ~(1<<22); - pci_write_config32(ctrl->d0, 0x0f4, dword); - -} static void ram_set_d0f0_regs(const struct mem_controller *ctrl) { #if DEBUG_RAM_CONFIG @@ -494,7 +403,6 @@ static void ram_set_d0f0_regs(const struct mem_controller *ctrl) { #endif } static void sdram_set_registers(const struct mem_controller *ctrl){ - // ram_set_rcomp_regs(ctrl); ram_set_d0f0_regs(ctrl); } @@ -677,6 +585,23 @@ static struct dimm_size spd_get_dimm_size(unsigned device) * a multiple of 4MB. The way we do it now we can size both * sides of an assymetric dimm. */ + /* the hell with that! just use byte 31 -- rgm */ + value = spd_read_byte(device, 31); /* size * 4 MB */ + value = log2(value); + /* this is in 4 MB chunks, or 32 MBits chunks. + * log base 2 of 32 Mbits is log2 of (32*1024*1024) is 25 + * so add 25 + */ + value += 25; + sz.side1 = value; + sz.side2 = 0; +#if DEBUG_RAM_CONFIG + print_debug("returned size log 2 in bits is :"); + print_debug_hex32(value); + print_debug("\r\n"); +#endif + goto out; +#if 0 value = spd_read_byte(device, 3); /* rows */ if (value < 0) goto hw_err; // if ((value & 0xf) == 0) goto val_err; @@ -727,6 +652,7 @@ static struct dimm_size spd_get_dimm_size(unsigned device) sz.side2 += ((value >> 4) & 0x0f); /* Add in columsn on side 2 */ goto out; +#endif val_err: die("Bad SPD value\r\n"); /* If an hw_error occurs report that I have no memory */ @@ -1249,7 +1175,7 @@ static const uint16_t cas_latency_80_4dimms[] = { static const uint8_t cas_latency_78[] = { - DRT_CAS_1_5, DRT_CAS_2_0, DRT_CAS_2_5 + DRT_CAS_2_0, DRT_CAS_2_5 }; static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mask) { @@ -1376,6 +1302,13 @@ static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mas } +static const unsigned int bustimings[8] = { + /* first four are for GM part */ + 266, 200, 200, -1, + /* and then the GME part */ + 266, 200, 200, 333 +}; + static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mask) { /* Walk through all dimms and find the interesection of the * supported dram timings. @@ -1385,8 +1318,51 @@ static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mas uint32_t dword; int value; + /* well, shit. Intel has not seen fit to document the observed + * setting for these bits. On my chipset it is 3 right now, and + * that's not in the table documented for this chip. + * What a shame. We will assume 133 mhz I guess? not sure. + * also they say in one place it is two bits and in another + * they say it is 3 bits! we'll assume two bits, that's + * the only one that makes sense. + */ + uint32_t rambusfrequency; + uint32_t ramindex; + + /* what kind of chip is it? */ + /* only bit that really matters is high order bit ... */ + /* here is a problem with the memory controller struct ... + * ram control is spread across d0/d1 on this part! + */ + ramindex = pci_read_config8(PCI_DEV(0,0,0), 0x44); + ramindex >>= 5; + + /* compute the index into the table. Use the type of chip + * as the high order bit and the 0:0.3:c0 & 7 as the low + * order four bits. + */ + + ramindex |= pci_read_config8(PCI_DEV(0,0,3), 0xc0) & 7; + /* we now have an index into the clock rate table ... */ + + rambusfrequency = bustimings[ramindex]; + /* Read the inititial state */ dword = pci_read_config32(ctrl->d0, 0x60); +#if DEBUG_RAM_CONFIG >= 10 + print_debug("spd_detect_dimms: bus timing index: "); + print_debug_hex32(ramindex); + print_debug(" and speed "); + print_debug_hex32(rambusfrequency); + print_debug("\r\n"); +#endif + + /* for now, since we are on deadline, set to "known good" and + * fix later. + */ + pci_write_config32(ctrl->d0, 0x60, 0x2a004425); + return dimm_mask; + #if 0 # Intel clears top bit here, should we? # No the default is on and for normal timming it should be on. Tom Z @@ -1394,7 +1370,7 @@ static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mas #endif -HERE. WHat's the frequency kenneth? +// HERE. WHat's the frequency kenneth? for(i = 0; i < DIMM_SOCKETS; i++) { if (!(dimm_mask & (1 << i))) { continue; @@ -1515,47 +1491,49 @@ static uint32_t set_dimm_size(const struct mem_controller *ctrl, struct dimm_siz uint32_t dch; uint8_t byte; + /* I think size2 is always 0 ... */ /* Double the size if we are using dual channel memory */ -// if (is_dual_channel(ctrl)) { - /* Since I have 2 identical channels double the sizes */ - sz.side1++ ; - sz.side2++; -// } - if (sz.side1 != sz.side2) { sz.side2 = 0; } - - /* Make certain side1 of the dimm is at least 64MB */ - if (sz.side1 >= (25 + 4)) { - memsz += (1 << (sz.side1 - (25 + 4)) ) ; - } + + + /* Make certain side1 of the dimm is at least 32MB */ + /* This 28 is weird. + * sz.size1 is log2 size in bits. + * so what's 28? So think of it as this: + * in log2 space: 10 + 10 + 8, i.e. 1024 * 1024 * 256 or + * 256 Mbits, or 32 Mbytes. + */ + /* this is from the e7500 code and it's just wrong for small dimes (< 64 MB) + * However, realistically, this case will never happen! the dimms are all bigger ... + * so skip the conditional completely. + * if (sz.side1 >= (28)) { } + */ + memsz += (1 << (sz.side1 - (28)) ) ; + /* Write the size of side 1 of the dimm */ + #if DEBUG_RAM_CONFIG + print_debug("Write size "); + print_debug_hex8(memsz); + print_debug(" to "); + print_debug_hex8(0x40 + index); + print_debug("\r\n"); +#endif byte = memsz; - pci_write_config8(ctrl->d0, 0x60+(index<<1), byte); + pci_write_config8(ctrl->d0, 0x40+index, byte); - /* Make certain side2 of the dimm is at least 64MB */ - if (sz.side2 >= (25 + 4)) { - memsz += (1 << (sz.side2 - (25 + 4)) ) ; - } - - /* Write the size of side 2 of the dimm */ - byte = memsz; - pci_write_config8(ctrl->d0, 0x61+(index<<1), byte); - /* now, fill in DRBs where no physical slot exists */ for(i=index+1;i<4;i++) { - pci_write_config8(ctrl->d0, 0x60+(i<<1),byte); - pci_write_config8(ctrl->d0, 0x61+(i<<1),byte); - + pci_write_config8(ctrl->d0, 0x40+i, byte); } return memsz; } -/* LAST_DRB_SLOT is a constant for any E7500 board */ -#define LAST_DRB_SLOT 0x67 + +#define LAST_DRB_SLOT 0x43 static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask) { @@ -1582,6 +1560,7 @@ static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask) } memsz = set_dimm_size(ctrl, sz, memsz, i); } +#if 0 /* For now hardset everything at 128MB boundaries */ /* %ebp has the ram size in multiples of 64MB */ // cmpl $0, %ebp /* test if there is no mem - smbus went bad */ @@ -1613,6 +1592,7 @@ static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask) pci_write_config16(ctrl->d0, 0xc8, word); } +#endif return dimm_mask; } @@ -1643,19 +1623,25 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) { if (dimm_mask < 0) goto hw_spd_err; + + /* skip for now until we just get "known good" up dimm_mask = spd_set_cas_latency(ctrl,dimm_mask); - dump_pci_device(PCI_DEV(0,0,1)); + */ + if (dimm_mask < 0) goto hw_spd_err; dimm_mask = spd_set_dram_timing(ctrl,dimm_mask); if (dimm_mask < 0) goto hw_spd_err; + #if DEBUG_RAM_CONFIG print_debug(spd_post_init); #endif //moved from dram_post_init spd_set_ram_size(ctrl, dimm_mask); - return; + dump_pci_device(PCI_DEV(0,0,1)); + return; + hw_spd_err: /* Unrecoverable error reading SPD data */ print_err("SPD error - reset\r\n"); @@ -1754,42 +1740,26 @@ static void dram_finish(const struct mem_controller *ctrl) uint32_t dword; uint8_t byte; /* Test to see if ECC support is enabled */ - dword = pci_read_config32(ctrl->d0, 0x7c); + dword = pci_read_config32(ctrl->d0, 0x70); dword >>=20; - dword &=3; - if(dword == 2) { + dword &=1; + if(dword == 1) { #if DEBUG_RAM_CONFIG print_debug(ecc_pre_init); #endif - /* Initialize ECC bits , use ECC zero mode (new to 7501)*/ - pci_write_config8(ctrl->d0, 0x52, 0x06); - pci_write_config8(ctrl->d0, 0x52, 0x07); - do { - byte = pci_read_config8(ctrl->d0, 0x52); - - } while ( (byte & 0x08 ) == 0); - - pci_write_config8(ctrl->d0, 0x52, byte & 0xfc); #if DEBUG_RAM_CONFIG print_debug(ecc_post_init); #endif - - /* Clear the ECC error bits */ #if 0 - pci_write_config8(ctrl->d0f1, 0x80, 0x03); /* dev 0, function 1, offset 80 */ - pci_write_config8(ctrl->d0f1, 0x82, 0x03); /* dev 0, function 1, offset 82 */ - - pci_write_config32(ctrl->d0f1, 0x40, 1<<18); /* clear dev 0, function 1, offset 40; bit 18 by writing a 1 to it */ - pci_write_config32(ctrl->d0f1, 0x44, 1<<18); /* clear dev 0, function 1, offset 44; bit 18 by writing a 1 to it */ -#endif - pci_write_config8(ctrl->d0, 0x52, 0x0d); - } - + /* Clear the ECC error bits */ + /* dword = pci_read_config32(ctrl->d0, 0x7c); /* FCS_EN */ dword |= (1<<17); pci_write_config32(ctrl->d0, 0x7c, dword); - +*/ +#endif + } #if DEBUG_RAM_CONFIG dumpnorth(); @@ -1863,15 +1833,23 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) int i; uint32_t mchtst; /* 1 & 2 Power up and start clocks */ - /* arg! the parts are memory mapped! For now, just grab address 0xc0000000 as the base, since I want to use - * constants, not variables, for this. + /* let the games begin. More undocumented shit, so we'll just set it + * as intel sets it */ - mchtst = pci_read_config32(ctrl->d0, 0xf4); - mchtst |= (1 << 22); - pci_write_config32(ctrl->d0, 0xf4, mchtst); - + mchtst = pci_read_config32(ctrl->d0, 0x68); #if DEBUG_RAM_CONFIG print_debug(ram_enable_1); + print_debug_hex32(mchtst); + dumpnorth(); +#endif + /* + mchtst = 0x10f10038; + pci_write_config32(ctrl->d0, 0x68, mchtst); + * can't find a ram power register ... + */ + +#if DEBUG_RAM_CONFIG + print_debug(ram_enable_2); #endif @@ -1882,15 +1860,17 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) /* 3. Apply NOP */ #if DEBUG_RAM_CONFIG + dump_pci_device(PCI_DEV(0, 0, 0)) ; print_debug(ram_enable_3); #endif RAM_NOP(ctrl); EXTRA_DELAY - +#define DEBUG_RAM_CONFIG 0 /* 4 Precharge all */ #if DEBUG_RAM_CONFIG print_debug(ram_enable_4); #endif +#define DEBUG_RAM_CONFIG 0 RAM_PRECHARGE(ctrl); EXTRA_DELAY @@ -1975,6 +1955,13 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) //SPECIAL_FINISHUP(); dram_finish(ctrl); + { char *c = (char *) 0; + *c = 'a'; + print_debug("Test: "); + print_debug_hex8(*c); + print_debug("\r\n"); + } + } |