summaryrefslogtreecommitdiff
path: root/src/northbridge/intel
diff options
context:
space:
mode:
authorArthur Heymans <arthur@aheymans.xyz>2017-12-25 20:13:28 +0100
committerMartin Roth <martinroth@google.com>2018-05-24 13:03:45 +0000
commitb5170c3e92b3f0cbce292f3414375b1326f4dd12 (patch)
tree8dd7d72aaa67d9727813f70445b667bf526b41a9 /src/northbridge/intel
parentf1287266ab7587672080aed2ddbc272a95fba9a3 (diff)
downloadcoreboot-b5170c3e92b3f0cbce292f3414375b1326f4dd12.tar.xz
nb/intel/x4x: Implement write leveling
DDR3 adapted a fly-by topology which allows for better signal integrity but at the same time requires additional calibration. This is done by settings the targeted rank in write leveling mode while disabling output buffer on the other ranks. After that the DQS signal gets sampled over DQ until a transition from high to low is found. Change-Id: I695969868b4534f87dd1f37244fdfac891a417f0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Diffstat (limited to 'src/northbridge/intel')
-rw-r--r--src/northbridge/intel/x4x/dq_dqs.c378
-rw-r--r--src/northbridge/intel/x4x/raminit_ddr23.c39
-rw-r--r--src/northbridge/intel/x4x/x4x.h2
3 files changed, 417 insertions, 2 deletions
diff --git a/src/northbridge/intel/x4x/dq_dqs.c b/src/northbridge/intel/x4x/dq_dqs.c
index 5de8837a1e..8704d394a3 100644
--- a/src/northbridge/intel/x4x/dq_dqs.c
+++ b/src/northbridge/intel/x4x/dq_dqs.c
@@ -16,6 +16,7 @@
#include <arch/io.h>
#include <console/console.h>
+#include <delay.h>
#include <stdint.h>
#include <string.h>
#include <types.h>
@@ -116,6 +117,34 @@ static int increment_dq_dqs(const struct sysinfo *s,
return CB_SUCCESS;
}
+static int decrement_dq_dqs(const struct sysinfo *s,
+ struct dll_setting *dq_dqs_setting)
+{
+ u8 max_tap_val = max_tap[s->selected_timings.mem_clk
+ - MEM_CLOCK_800MHz];
+
+ if (dq_dqs_setting->pi > 0) {
+ dq_dqs_setting->pi -= 1;
+ } else if (dq_dqs_setting->tap > 0) {
+ dq_dqs_setting->pi = 6;
+ dq_dqs_setting->tap -= 1;
+ } else if (dq_dqs_setting->clk_delay > 0) {
+ dq_dqs_setting->pi = 6;
+ dq_dqs_setting->tap = max_tap_val;
+ dq_dqs_setting->clk_delay -= 1;
+ } else if (dq_dqs_setting->coarse > 0) {
+ dq_dqs_setting->pi = 6;
+ dq_dqs_setting->tap = max_tap_val;
+ dq_dqs_setting->clk_delay += 1;
+ dq_dqs_setting->coarse -= 1;
+ } else {
+ return CB_ERR;
+ }
+ set_db(s, dq_dqs_setting);
+ return CB_SUCCESS;
+}
+
+
#define WT_PATTERN_SIZE 80
static const u32 write_training_schedule[WT_PATTERN_SIZE] = {
@@ -501,3 +530,352 @@ int do_read_training(struct sysinfo *s)
printk(BIOS_DEBUG, "Done DQS read training\n");
return CB_SUCCESS;
}
+
+/* Enable write leveling on selected rank and disable output on other ranks */
+static void set_rank_write_level(struct sysinfo *s, u8 channel, u8 config,
+ u8 config_rank, u8 target_rank, int wl_enable)
+{
+ u32 emrs1;
+
+ /* Is shifted by bits 2 later so u8 can be used to reduce size */
+ const static u8 emrs1_lut[8][4][4]={ /* [Config][Leveling Rank][Rank] */
+ { /* Config 0: 2R2R */
+ {0x11, 0x00, 0x91, 0x00},
+ {0x00, 0x11, 0x91, 0x00},
+ {0x91, 0x00, 0x11, 0x00},
+ {0x91, 0x00, 0x00, 0x11}
+ },
+ { // Config 1: 2R1R
+ {0x11, 0x00, 0x91, 0x00},
+ {0x00, 0x11, 0x91, 0x00},
+ {0x91, 0x00, 0x11, 0x00},
+ {0x00, 0x00, 0x00, 0x00}
+ },
+ { // Config 2: 1R2R
+ {0x11, 0x00, 0x91, 0x00},
+ {0x00, 0x00, 0x00, 0x00},
+ {0x91, 0x00, 0x11, 0x00},
+ {0x91, 0x00, 0x00, 0x11}
+ },
+ { // Config 3: 1R1R
+ {0x11, 0x00, 0x91, 0x00},
+ {0x00, 0x00, 0x00, 0x00},
+ {0x91, 0x00, 0x11, 0x00},
+ {0x00, 0x00, 0x00, 0x00}
+ },
+ { // Config 4: 2R0R
+ {0x11, 0x00, 0x00, 0x00},
+ {0x00, 0x11, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00}
+ },
+ { // Config 5: 0R2R
+ {0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x11, 0x00},
+ {0x00, 0x00, 0x00, 0x11}
+ },
+ { // Config 6: 1R0R
+ {0x11, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00}
+ },
+ { // Config 7: 0R1R
+ {0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x11, 0x00},
+ {0x00, 0x00, 0x00, 0x00}
+ }
+ };
+
+ if (wl_enable) {
+ printk(RAM_DEBUG, "Entering WL mode\n");
+ printk(RAM_DEBUG, "Using WL ODT values\n");
+ emrs1 = emrs1_lut[config][target_rank][config_rank];
+ } else {
+ printk(RAM_DEBUG, "Exiting WL mode\n");
+ emrs1 = ddr3_emrs1_rtt_nom_config[s->dimm_config[channel]][config_rank];
+ }
+ printk(RAM_DEBUG, "Setting ODT for rank%d to ", config_rank);
+ switch (emrs1) {
+ case 0:
+ printk(RAM_DEBUG, "High-Z\n");
+ break;
+ case 0x11:
+ printk(RAM_DEBUG, "40 Ohm\n");
+ break;
+ case 0x81:
+ printk(RAM_DEBUG, "30 Ohm\n");
+ break;
+ case 0x80:
+ printk(RAM_DEBUG, "20 Ohm\n");
+ break;
+ case 0x10:
+ printk(RAM_DEBUG, "120 Ohm\n");
+ break;
+ case 0x01:
+ printk(RAM_DEBUG, "60 Ohm\n");
+ break;
+ default:
+ printk(BIOS_WARNING, "ODT value Undefined!\n");
+ break;
+ }
+
+ emrs1 <<= 2;
+ /* Set output drive strength to 34 Ohm during write levelling */
+ emrs1 |= (1 << 1);
+
+ if (wl_enable && (target_rank != config_rank)) {
+ printk(RAM_DEBUG, "Disabling output for rank%d\n", config_rank);
+ emrs1 |= (1 << 12);
+ }
+ if (wl_enable && (target_rank == config_rank)) {
+ printk(RAM_DEBUG, "Enabling WL for rank%d\n", config_rank);
+ emrs1 |= (1 << 7);
+ }
+ send_jedec_cmd(s, config_rank, channel, EMRS1_CMD, emrs1);
+}
+
+#define N_SAMPLES 5
+
+static void sample_dq(const struct sysinfo *s, u8 channel, u8 rank,
+ u8 high_found[8]) {
+ u32 address = test_address(channel, rank);
+ int samples, lane;
+
+ memset(high_found, 0, TOTAL_BYTELANES * sizeof(high_found[0]));
+ for (samples = 0; samples < N_SAMPLES; samples++) {
+ write32((u32 *)address, 0x12341234);
+ write32((u32 *)address + 4, 0x12341234);
+ udelay(5);
+ FOR_EACH_BYTELANE(lane) {
+ u8 dq_high = (MCHBAR8(0x561 + 0x400 * channel
+ + (lane * 4)) >> 7) & 1;
+ high_found[lane] += dq_high;
+ }
+ }
+}
+
+static enum cb_err increment_to_dqs_edge(struct sysinfo *s, u8 channel, u8 rank)
+{
+ int lane;
+ u8 saved_24d;
+ struct dll_setting dqs_setting[TOTAL_BYTELANES];
+ u8 bytelane_ok = 0;
+ u8 dq_sample[TOTAL_BYTELANES];
+
+ memcpy(dqs_setting, s->dqs_settings[channel], sizeof(dqs_setting));
+ FOR_EACH_BYTELANE(lane)
+ dqsset(channel, lane, &dqs_setting[lane]);
+
+ saved_24d = MCHBAR8(0x24d + 0x400 * channel);
+
+ /* Loop 0: Find DQ sample low, by decreasing */
+ while (bytelane_ok != 0xff) {
+ sample_dq(s, channel, rank, dq_sample);
+ FOR_EACH_BYTELANE(lane) {
+ if (bytelane_ok & (1 << lane))
+ continue;
+
+ printk(RAM_SPEW, "%d, %d, %02d, %d,"
+ " lane%d sample: %d\n",
+ dqs_setting[lane].coarse,
+ dqs_setting[lane].clk_delay,
+ dqs_setting[lane].tap,
+ dqs_setting[lane].pi,
+ lane,
+ dq_sample[lane]);
+
+ if (dq_sample[lane] > 0) {
+ if (decrement_dq_dqs(s, &dqs_setting[lane])) {
+ printk(BIOS_EMERG,
+ "DQS setting channel%d, "
+ "lane %d reached a minimum!\n",
+ channel, lane);
+ return CB_ERR;
+ }
+ } else {
+ bytelane_ok |= (1 << lane);
+ }
+ dqsset(channel, lane, &dqs_setting[lane]);
+ }
+ }
+
+ printk(RAM_DEBUG, "DQS settings on PASS #0:\n");
+ FOR_EACH_BYTELANE(lane) {
+ printk(RAM_DEBUG, "lane %d: ", lane);
+ print_dll_setting(&dqs_setting[lane], 0);
+ }
+
+ /* Loop 1: Find DQ sample high, by increasing */
+ bytelane_ok = 0;
+ while (bytelane_ok != 0xff) {
+ sample_dq(s, channel, rank, dq_sample);
+ FOR_EACH_BYTELANE(lane) {
+ if (bytelane_ok & (1 << lane))
+ continue;
+
+ printk(RAM_SPEW, "%d, %d, %02d, %d, lane%d sample: %d\n",
+ dqs_setting[lane].coarse,
+ dqs_setting[lane].clk_delay,
+ dqs_setting[lane].tap,
+ dqs_setting[lane].pi,
+ lane,
+ dq_sample[lane]);
+
+ if (dq_sample[lane] == N_SAMPLES) {
+ bytelane_ok |= (1 << lane);
+ } else {
+ if (increment_dq_dqs(s, &dqs_setting[lane])) {
+ printk(BIOS_EMERG,
+ "DQS setting channel%d, "
+ "lane %d reached a maximum!\n",
+ channel, lane);
+ return CB_ERR;
+ }
+ }
+ dqsset(channel, lane, &dqs_setting[lane]);
+ }
+ }
+
+ printk(RAM_DEBUG, "DQS settings on PASS #1:\n");
+ FOR_EACH_BYTELANE(lane) {
+ printk(RAM_DEBUG, "lane %d: ", lane);
+ print_dll_setting(&dqs_setting[lane], 0);
+ }
+
+ printk(BIOS_DEBUG, "final WL DQS settings on CH%d\n", channel);
+ FOR_EACH_BYTELANE(lane) {
+ printk(BIOS_DEBUG, "\tlane%d: ", lane);
+ print_dll_setting(&dqs_setting[lane], 1);
+ s->dqs_settings[channel][lane] = dqs_setting[lane];
+ }
+
+ MCHBAR8(0x24d + 0x400 * channel) = saved_24d;
+ return CB_SUCCESS;
+}
+
+/*
+ * DDR3 uses flyby topology where the clock signal takes a different path
+ * than the data signal, to allow for better signal intergrity.
+ * Therefore the delay on the data signals needs to account for this.
+ * This is done by by sampleling the the DQS write (tx) signal back over
+ * the DQ signal and looking for delay values where the sample transitions
+ * from high to low.
+ * Here the following is done:
+ * - enable write levelling on the first populated rank
+ * - disable output on other populated ranks
+ * - start from safe DQS (tx) delays (other transitions can be
+ * found at different starting values but are generally bad)
+ * - loop0: decrease DQS (tx) delays until low is sampled,
+ * loop1: increase DQS (tx) delays until high is sampled,
+ * That way we are sure to hit a low-high transition
+ * - put all ranks in normal mode of operation again
+ * - note: All ranks need to be leveled together
+ */
+void search_write_leveling(struct sysinfo *s)
+{
+ int i, ch, count;
+ u8 config, rank0, rank1, lane;
+ struct dll_setting dq_setting;
+
+ u8 chanconfig_lut[16]={0, 6, 4, 6, 7, 3, 1, 3, 5, 2, 0, 2, 7, 3, 1, 3};
+
+ u8 odt_force[8][4] = { /* [Config][leveling rank] */
+ {0x5, 0x6, 0x5, 0x9},
+ {0x5, 0x6, 0x5, 0x0},
+ {0x5, 0x0, 0x5, 0x9},
+ {0x5, 0x0, 0x5, 0x0},
+ {0x1, 0x2, 0x0, 0x0},
+ {0x0, 0x0, 0x4, 0x8},
+ {0x1, 0x0, 0x0, 0x0},
+ {0x0, 0x0, 0x4, 0x0}
+ };
+
+ printk(BIOS_DEBUG, "Starting write levelling.\n");
+
+ FOR_EACH_POPULATED_CHANNEL(s->dimms, ch) {
+ printk(BIOS_DEBUG, "\tCH%d\n", ch);
+ config = chanconfig_lut[s->dimm_config[ch]];
+
+ MCHBAR8(0x5d8 + 0x400 * ch) =
+ MCHBAR8(0x5d8 + 0x400 * ch) & ~0x0e;
+ MCHBAR16(0x5c4 + 0x400 * ch) = (MCHBAR16(0x5c4 + 0x400 * ch) &
+ ~0x3fff) | 0x3fff;
+ MCHBAR8(0x265 + 0x400 * ch) =
+ MCHBAR8(0x265 + 0x400 * ch) & ~0x1f;
+ /* find the first populated rank */
+ FOR_EACH_POPULATED_RANK_IN_CHANNEL(s->dimms, ch, rank0)
+ break;
+
+ /* Enable WL for the first populated rank and disable output
+ for others */
+ FOR_EACH_POPULATED_RANK_IN_CHANNEL(s->dimms, ch, rank1)
+ set_rank_write_level(s, ch, config, rank1, rank0, 1);
+
+ MCHBAR8(0x298 + 2 + 0x400 * ch) =
+ (MCHBAR8(0x298 + 2 + 0x400 * ch) & ~0x0f)
+ | odt_force[config][rank0];
+ MCHBAR8(0x271 + 0x400 * ch) = (MCHBAR8(0x271 + 0x400 * ch)
+ & ~0x7e) | 0x4e;
+ MCHBAR8(0x5d9 + 0x400 * ch) =
+ (MCHBAR8(0x5d9 + 0x400 * ch) & ~0x04) | 0x04;
+ MCHBAR32(0x1a0) = (MCHBAR32(0x1a0) & ~0x07ffffff)
+ | 0x00014000;
+
+ if (increment_to_dqs_edge(s, ch, rank0))
+ die("Write Leveling failed!");
+
+ MCHBAR8(0x298 + 2 + 0x400 * ch) =
+ MCHBAR8(0x298 + 2 + 0x400 * ch) & ~0x0f;
+ MCHBAR8(0x271 + 0x400 * ch) =
+ (MCHBAR8(0x271 + 0x400 * ch) & ~0x7e)
+ | 0x0e;
+ MCHBAR8(0x5d9 + 0x400 * ch) =
+ (MCHBAR8(0x5d9 + 0x400 * ch) & ~0x04);
+ MCHBAR32(0x1a0) = (MCHBAR32(0x1a0)
+ & ~0x07ffffff) | 0x00555801;
+
+ /* Disable WL on the trained rank */
+ set_rank_write_level(s, ch, config, rank0, rank0, 0);
+ send_jedec_cmd(s, rank0, ch, NORMALOP_CMD, 1 << 12);
+
+ MCHBAR8(0x5d8 + 0x400 * ch) = (MCHBAR8(0x5d8 + 0x400 * ch)
+ & ~0x0e) | 0x0e;
+ MCHBAR16(0x5c4 + 0x400 * ch) = (MCHBAR16(0x5c4 + 0x400 * ch)
+ & ~0x3fff) | 0x1807;
+ MCHBAR8(0x265 + 0x400 * ch) = MCHBAR8(0x265 + 0x400 * ch) & ~0x1f;
+
+ /* Disable write level mode for all ranks */
+ FOR_EACH_POPULATED_RANK_IN_CHANNEL(s->dimms, ch, rank0)
+ set_rank_write_level(s, ch, config, rank0, rank0, 0);
+ }
+
+ MCHBAR8(0x5dc) = (MCHBAR8(0x5dc) & ~0x80) | 0x80;
+
+ /* Increment DQ (rx) dll setting by a standard amount past DQS,
+ This is further trained in write training. */
+ switch (s->selected_timings.mem_clk) {
+ default:
+ case MEM_CLOCK_800MHz:
+ count = 39;
+ break;
+ case MEM_CLOCK_1066MHz:
+ count = 32;
+ break;
+ case MEM_CLOCK_1333MHz:
+ count = 42;
+ break;
+ }
+
+ FOR_EACH_POPULATED_CHANNEL_AND_BYTELANE(s->dimms, ch, lane) {
+ dq_setting = s->dqs_settings[ch][lane];
+ for (i = 0; i < count; i++)
+ if (increment_dq_dqs(s, &dq_setting))
+ die("Can't further increase DQ past DQS delay");
+ dqset(ch, lane, &dq_setting);
+ }
+
+ printk(BIOS_DEBUG, "Done write levelling.\n");
+}
diff --git a/src/northbridge/intel/x4x/raminit_ddr23.c b/src/northbridge/intel/x4x/raminit_ddr23.c
index 6d6111c5c4..618e21215c 100644
--- a/src/northbridge/intel/x4x/raminit_ddr23.c
+++ b/src/northbridge/intel/x4x/raminit_ddr23.c
@@ -1361,8 +1361,7 @@ static u32 mirror_shift_bit(const u32 data, u8 bit)
return (data & ~(3 << bit)) | temp0 | temp1;
}
-static void send_jedec_cmd(const struct sysinfo *s, u8 r,
- u8 ch, u8 cmd, u32 val)
+void send_jedec_cmd(const struct sysinfo *s, u8 r, u8 ch, u8 cmd, u32 val)
{
u32 addr = test_address(ch, r);
volatile u32 rubbish;
@@ -1933,6 +1932,24 @@ static void power_settings(struct sysinfo *s)
MCHBAR8(0x561 + (lane << 2)) = MCHBAR8(0x561 + (lane << 2)) & ~(1 << 3);
}
+static void software_ddr3_reset(struct sysinfo *s)
+{
+ printk(BIOS_DEBUG, "Software initiated DDR3 reset.\n");
+ MCHBAR8(0x1a8) = MCHBAR8(0x1a8) | 0x02;
+ MCHBAR8(0x5da) = MCHBAR8(0x5da) & ~0x80;
+ MCHBAR8(0x1a8) = MCHBAR8(0x1a8) & ~0x02;
+ MCHBAR8(0x5da) = (MCHBAR8(0x5da) & ~0x03) | 1;
+ udelay(200);
+ MCHBAR8(0x1a8) = MCHBAR8(0x1a8) & ~0x02;
+ MCHBAR8(0x5da) = MCHBAR8(0x5da) | 0x80;
+ MCHBAR8(0x5da) = MCHBAR8(0x5da) & ~0x80;
+ udelay(500);
+ MCHBAR8(0x5da) = MCHBAR8(0x5da) | 0x03;
+ MCHBAR8(0x5da) = MCHBAR8(0x5da) & ~0x03;
+ /* After write leveling the dram needs to be reset and reinitialised */
+ jedec_ddr3(s);
+}
+
void do_raminit(struct sysinfo *s, int fast_boot)
{
u8 ch;
@@ -2019,6 +2036,17 @@ void do_raminit(struct sysinfo *s, int fast_boot)
MCHBAR8(0x9d8) = MCHBAR8(0x9d8) | 0x7;
}
+ /* DDR3 reset */
+ if ((s->spd_type == DDR3) && (s->boot_path != BOOT_PATH_RESUME)) {
+ printk(BIOS_DEBUG, "DDR3 Reset.\n");
+ MCHBAR8(0x1a8) = MCHBAR8(0x1a8) & ~0x2;
+ MCHBAR8(0x5da) = MCHBAR8(0x5da) | 0x80;
+ udelay(500);
+ MCHBAR8(0x1a8) = MCHBAR8(0x1a8) & ~0x2;
+ MCHBAR8(0x5da) = MCHBAR8(0x5da) & ~0x80;
+ udelay(500);
+ }
+
// Pre jedec
MCHBAR8(0x40) = MCHBAR8(0x40) | 0x2;
FOR_EACH_POPULATED_CHANNEL(s->dimms, ch) {
@@ -2038,6 +2066,13 @@ void do_raminit(struct sysinfo *s, int fast_boot)
printk(BIOS_DEBUG, "Done jedec steps\n");
+ if (s->spd_type == DDR3) {
+ if (!fast_boot)
+ search_write_leveling(s);
+ if (s->boot_path == BOOT_PATH_NORMAL)
+ software_ddr3_reset(s);
+ }
+
// After JEDEC reset
MCHBAR8(0x40) = MCHBAR8(0x40) & ~0x2;
FOR_EACH_POPULATED_CHANNEL(s->dimms, ch) {
diff --git a/src/northbridge/intel/x4x/x4x.h b/src/northbridge/intel/x4x/x4x.h
index 53b73ae364..34979a01da 100644
--- a/src/northbridge/intel/x4x/x4x.h
+++ b/src/northbridge/intel/x4x/x4x.h
@@ -373,6 +373,8 @@ void rt_set_dqs(u8 channel, u8 lane, u8 rank,
struct rt_dqs_setting *dqs_setting);
int do_write_training(struct sysinfo *s);
int do_read_training(struct sysinfo *s);
+void search_write_leveling(struct sysinfo *s);
+void send_jedec_cmd(const struct sysinfo *s, u8 r, u8 ch, u8 cmd, u32 val);
extern const struct dll_setting default_ddr2_667_ctrl[7];
extern const struct dll_setting default_ddr2_800_ctrl[7];