diff options
author | Ronald G. Minnich <rminnich@gmail.com> | 2004-11-10 15:12:48 +0000 |
---|---|---|
committer | Ronald G. Minnich <rminnich@gmail.com> | 2004-11-10 15:12:48 +0000 |
commit | 52c2277a1bfadcf9fca9e70a313a9a7f30db0069 (patch) | |
tree | d28271bf4f3b115c9d9125b607979a8118862272 /src/northbridge/intel | |
parent | 132368b4c58cf74fc0347f4ab72bdf467e2a62a3 (diff) | |
download | coreboot-52c2277a1bfadcf9fca9e70a313a9a7f30db0069.tar.xz |
adl855pc support
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1772 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/intel')
-rw-r--r-- | src/northbridge/intel/i855pm/chip.h | 2 | ||||
-rw-r--r-- | src/northbridge/intel/i855pm/northbridge.c | 2 | ||||
-rw-r--r-- | src/northbridge/intel/i855pm/raminit.c | 488 |
3 files changed, 59 insertions, 433 deletions
diff --git a/src/northbridge/intel/i855pm/chip.h b/src/northbridge/intel/i855pm/chip.h index 3f6921f2ee..9b14183aad 100644 --- a/src/northbridge/intel/i855pm/chip.h +++ b/src/northbridge/intel/i855pm/chip.h @@ -2,4 +2,4 @@ struct northbridge_intel_i855pm_config { }; -extern struct chip_operations northbridge_intel_i855pm_control; +extern struct chip_operations northbridge_intel_i855pm_ops; diff --git a/src/northbridge/intel/i855pm/northbridge.c b/src/northbridge/intel/i855pm/northbridge.c index 3021397085..c311a05edc 100644 --- a/src/northbridge/intel/i855pm/northbridge.c +++ b/src/northbridge/intel/i855pm/northbridge.c @@ -156,7 +156,7 @@ static void enable_dev(struct device *dev) } } -struct chip_operations northbridge_intel_i855pm_control = { +struct chip_operations northbridge_intel_i855pm_ops = { CHIP_NAME("intel i855pm Northbridge") .enable_dev = enable_dev, }; diff --git a/src/northbridge/intel/i855pm/raminit.c b/src/northbridge/intel/i855pm/raminit.c index 136e3cb51a..5066f424bf 100644 --- a/src/northbridge/intel/i855pm/raminit.c +++ b/src/northbridge/intel/i855pm/raminit.c @@ -1,4 +1,3 @@ - /* This was originally for the e7500, modified for i855pm */ @@ -44,8 +43,8 @@ #define BURST_LENGTH BURST_4 #define BURST_TYPE BURST_INTERLEAVED #define CAS_LATENCY CAS_2_0 -//#define CAS_LATENCY CAS_2_5 -//#define CAS_LATENCY CAS_1_5 +/*#define CAS_LATENCY CAS_2_5*/ +/*#define CAS_LATENCY CAS_1_5*/ /* WOW! this could be bad! sets casl to 2 without checking! */ #define MRS_VALUE (MODE_NORM | CAS_LATENCY | BURST_TYPE | BURST_LENGTH) @@ -75,7 +74,7 @@ static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t v /* %ecx - initial address to read from */ /* Compute the offset */ dword = value >> 16; - // for(i=0;i<4;i++) { + /* for(i=0;i<4;i++) {*/ for(i=0;i<1;i++) { /* Set the ram command */ byte = pci_read_config8(ctrl->d0, 0x70); @@ -131,6 +130,8 @@ static inline void ram_mrs(const struct mem_controller *ctrl, uint32_t value){ /* Transform it into the form expected by SDRAM */ dword = ram_cas_latency[(byte>>5) & 1]; #warning RAM_MRS -- using BROKEN hard-wired CAS 2.0. FIX ME SOON +/* + */ value |= (dword<<(16+MD_SHIFT)); value |= (MODE_NORM | BURST_TYPE | BURST_LENGTH) << (16+MD_SHIFT); @@ -290,8 +291,8 @@ static const long register_values[] = { * 10 == Write Only (Writes to DRAM, Reads to memory mapped I/O space) * 11 == Normal (All Access go to DRAM) */ - // 0x90, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24), - //0x94, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24), + /* 0x90, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24),*/ + /*0x94, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24),*/ /* FIXME why was I attempting to set a reserved bit? */ @@ -373,7 +374,7 @@ static void write_8dwords(uint32_t src_addr, uint32_t dst_addr) { } } -//#define SLOW_DOWN_IO inb(0x80); +/*#define SLOW_DOWN_IO inb(0x80);*/ #define SLOW_DOWN_IO udelay(40); @@ -602,58 +603,6 @@ static struct dimm_size spd_get_dimm_size(unsigned device) print_debug("\r\n"); #endif goto out; -#if 0 - value = spd_read_byte(device, 3); /* rows */ - if (value < 0) goto hw_err; -// if ((value & 0xf) == 0) goto val_err; - sz.side1 += value & 0xf; - - value = spd_read_byte(device, 4); /* columns */ - if (value < 0) goto hw_err; -// if ((value & 0xf) == 0) goto val_err; - sz.side1 += value & 0xf; - - value = spd_read_byte(device, 17); /* banks */ - if (value < 0) goto hw_err; -// if ((value & 0xff) == 0) goto val_err; - value &=0xff; - sz.side1 += log2(value); - - /* Get the module data width and convert it to a power of two */ - value = spd_read_byte(device, 7); /* (high byte) */ - if (value < 0) goto hw_err; - value &= 0xff; - value <<= 8; - - low = spd_read_byte(device, 6); /* (low byte) */ - if (low < 0) goto hw_err; - value |= (low & 0xff); -// if ((value != 72) && (value != 64)) goto val_err; - sz.side1 += log2(value); - - /* side 2 */ - value = spd_read_byte(device, 5); /* number of physical banks */ - if (value < 0) goto hw_err; - if (value == 1) goto out; -// if (value != 2) goto val_err; - - /* Start with the symmetrical case */ - sz.side2 = sz.side1; - - value = spd_read_byte(device, 3); /* rows */ - if (value < 0) goto hw_err; - if ((value & 0xf0) == 0) goto out; /* If symmetrical we are done */ - sz.side2 -= (value & 0x0f); /* Subtract out rows on side 1 */ - sz.side2 += ((value >> 4) & 0x0f); /* Add in rows on side 2 */ - - value = spd_read_byte(device, 4); /* columns */ - if (value < 0) goto hw_err; -// if ((value & 0xff) == 0) goto val_err; - sz.side2 -= (value & 0x0f); /* Subtract out columns on side 1 */ - sz.side2 += ((value >> 4) & 0x0f); /* Add in columsn on side 2 */ - goto out; - -#endif val_err: die("Bad SPD value\r\n"); /* If an hw_error occurs report that I have no memory */ @@ -731,7 +680,7 @@ static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_ */ sz.side1-=14; - /* Place in the %ebp the dra place holder */ //i + /* Place in the %ebp the dra place holder */ /*i*/ word &= ~(7<<i); word |= sz.side1<<(i<<3); @@ -747,7 +696,7 @@ static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_ /* Convert to the format needed for the DRA register */ sz.side2-=14; - /* Place in the %ebp the dra place holder */ //i + /* Place in the %ebp the dra place holder */ /*i*/ word &= ~(7<<i); word |= sz.side2<<((i<<3) + 4 ); @@ -762,241 +711,6 @@ static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_ return dimm_mask; } -#if 0 - /* - * Routine: sdram_read_paired_byte - * Arguments: %esp return address - * %bl device on the smbus to read from - * %bh address on the smbus to read - * Results: - * zf clear - * byte read in %al - * On Error: - * zf set - * %eax trashed - * - * Preserved: %ebx, %esi, %edi - * - * Trashed: %eax, %ecx, %edx, %ebp, %esp, %eflags - * Used: %eax, %ebx, %ecx, %edx, %esp, %eflags - * - * Effects: Reads two spd bytes from both ram channesl - * and errors if they are not equal. - * It then returns the equal result. - */ -static spd_read_paired_byte () { - movl %esp, %ebp - CALLSP(smbus_read_byte) - setnz %cl - movb %al, %ch - addb $(SMBUS_MEM_CHANNEL_OFF), %bl - CALLSP(smbus_read_byte) - movb %ch, %ah - setnz %ch - subb $(SMBUS_MEM_CHANNEL_OFF), %bl - - /* See if dimms on both sides are equally present */ - cmp %cl, %ch - jne sdram_presence_mismatch - - /* Leave if I have no data */ - testb %cl, %cl - jz spd_verify_byte_out - - /* Verify the data is identical */ - cmp %ah, %al - jne sdram_value_mismatch - - /* Clear the zero flag */ - testb %cl, %cl -spd_verify_byte_out: - movl %ebp, %esp - RETSP -} - - /* - * Routine: spd_verify_dimms - * Arguments: none - * Results: none - * Preserved: none - * Trashed: %eax, %ebx, %ecx, %edx, %ebp, %esi, %edi, %esp, %eflags - * Used: %eax, %ebx, %ecx, %edx, %ebp, %esi, %edi, %esp, %eflags - * - * Effects: - * - Verify all interesting spd information - * matches for both dimm channels. - * - Additional error checks that can be easily done - * here are computed as well, so I don't need to - * worry about them later. - */ -static spd_verify_dimms() { - movl $(SMBUS_MEM_DEVICE_START), %ebx -spd_verify_dimm: - /* Verify this is DDR SDRAM */ - movb $2, %bh - CALLSP(spd_read_paired_byte) - jz spd_verify_next_dimm - cmpb $7, %al - jne invalid_dimm_type - - /* Verify the row addresses */ - movb $3, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $0x0f, %al - jz spd_invalid_data - - /* Column addresses */ - movb $4, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $0xf, %al - jz spd_invalid_data - - /* Physical Banks */ - movb $5, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - cmp $1, %al - jb spd_invalid_data - cmp $2, %al - ja spd_invalid_data - - /* Module Data Width */ - movb $7, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - cmpb $0, %al - jne spd_invalid_data - - movb $6, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - cmpb $64, %al - je 1f - cmpb $72, %al - je 1f - jmp spd_unsupported_data -1: - - /* Cycle time at highest CAS latency CL=X */ - movb $9, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - - /* SDRAM type */ - movb $11, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - - /* Refresh Interval */ - movb $12, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - - /* SDRAM Width */ - movb $13, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - andb $0x7f, %al - cmpb $4, %al - je 1f - cmpb $8, %al - je 1f - jmp spd_unsupported_data -1: - - /* Back-to-Back Random Column Accesses */ - movb $15, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb %al, %al - jz spd_invalid_data - cmpb $4, %al - ja spd_unsupported_data - - /* Burst Lengths */ - movb $16, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $(1<<2), %al - jz spd_unsupported_data - - /* Logical Banks */ - movb $17, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb %al, %al - jz spd_invalid_data - - /* Supported CAS Latencies */ - movb $18, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $(1 << 1), %al /* CL 1.5 */ - jnz 1f - testb $(1 << 2), %al /* CL 2.0 */ - jnz 1f - testb $(1 << 3), %al /* CL 2.5 */ - jnz 1f - jmp spd_unsupported_data -1: - - /* Cycle time at Cas Latency (CLX - 0.5) */ - movb $23, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - - /* Cycle time at Cas Latency (CLX - 1.0) */ - movb $26, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - - /* tRP Row precharge time */ - movb $27, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $0xfc, %al - jz spd_invalid_data - - - /* tRCD RAS to CAS */ - movb $29, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $0xfc, %al - jz spd_invalid_data - - /* tRAS Activate to Precharge */ - movb $30, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb %al, %al - jz spd_invalid_data - - /* Module Bank Density */ - movb $31, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - testb $(1<<2), %al /* 16MB */ - jnz spd_unsupported_data - testb $(1<<3), %al - jnz spd_unsupported_data /* 32MB */ - - /* Address and Command Hold Time After Clock */ - movb $33, %bh - CALLSP(spd_read_paired_byte) - jz spd_missing_data - -spd_verify_next_dimm: - /* go to the next DIMM */ - addb $(SMBUS_MEM_DEVICE_INC), %bl /* increment the smbus device */ - cmpb $SMBUS_MEM_DEVICE_END, %bl - jbe spd_verify_dimm -spd_verify_dimms_out: - RET_LABEL(spd_verify_dimms) -} -#endif #define spd_pre_init "Reading SPD data...\r\n" #define spd_pre_set "setting based on SPD data...\r\n" #define spd_post_init "done\r\n" @@ -1037,9 +751,9 @@ static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, lon /* Read the inititial state */ dword = pci_read_config32(ctrl->d0, 0x70); - // WTF? - //dword |= 0x10000; -#if 0 // DEBUG_RAM_CONFIG + /* WTF? */ + /*dword |= 0x10000;*/ +#if 0 /* DEBUG_RAM_CONFIG*/ print_debug("spd_detect_dimms: 0x70.l is:"); print_debug_hex32(dword); print_debug("\r\n"); @@ -1047,13 +761,7 @@ static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, lon #if 0 /* Test if ECC cmos option is enabled */ - movb $RTC_BOOT_BYTE, %al - outb %al, $0x70 - inb $0x71, %al - testb $(1<<2), %al - jnz 1f /* Clear the ecc enable */ - andl $~(3 << 20), %esi 1: #endif @@ -1087,7 +795,7 @@ static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, lon if(value < 0 ) continue; value &= 0x7f; if(value > MAX_SPD_REFRESH_RATE) { print_err("unsupported refresh rate\r\n");} -// if(value == 0xff) { print_err("unsupported refresh rate\r\n");} +/* if(value == 0xff) { print_err("unsupported refresh rate\r\n");}*/ #if DEBUG_RAM_CONFIG print_debug("spd_detect_dimms: ref rate index:"); @@ -1131,12 +839,11 @@ static long spd_enable_clocks(const struct mem_controller *ctrl, long dimm_mask) /* Read the inititial state */ dword = pci_read_config32(ctrl->d0, 0x8c); -#if 0 -# Intel clears top bit here, should we? -# No the default is on and for normal timming it should be on. Tom Z +/* + Intel clears top bit here, should we? + No the default is on and for normal timming it should be on. Tom Z andl $0x7f, %esi -#endif - + */ for(i = 0; i < DIMM_SOCKETS; i++) { if (!(dimm_mask & (1 << i))) { @@ -1166,8 +873,8 @@ static const uint16_t cas_latency_80[] = { * Steven James 02/06/2003 */ -//# .byte 0x05, 0x01, 0x06 -//# .byte 0xb5, 0xb1, 0xb6 +/*# .byte 0x05, 0x01, 0x06 */ +/*# .byte 0xb5, 0xb1, 0xb6 */ 0x0, 0x0bb1, 0x0662 /* RCVEN */ }; static const uint16_t cas_latency_80_4dimms[] = { @@ -1187,7 +894,7 @@ static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mas /* Initially allow cas latencies 2.5, 2.0 * which the chipset supports. */ - uint32_t dword = (1<<3)| (1<<2);// esi + uint32_t dword = (1<<3)| (1<<2);/* esi*/ uint32_t edi; uint32_t ecx; unsigned device; @@ -1248,7 +955,7 @@ static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mas /* After all of the arduous calculation setup with the fastest * cas latency I can use. */ - value = __builtin_bsf(dword); // bsrl = log2 how about bsfl? + value = __builtin_bsf(dword); /* bsrl = log2 how about bsfl?*/ if(value ==0 ) return -1; ecx = value -1; @@ -1262,7 +969,7 @@ static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mas dword |= (1<<26); /* the rest of the references are words */ -// ecx<<=1; // don't need shift left, because we already define that in u16 array +/* ecx<<=1; // don't need shift left, because we already define that in u16 array*/ pci_write_config32(ctrl->d0, 0x88, dword); @@ -1364,14 +1071,14 @@ static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mas pci_write_config32(ctrl->d0, 0x60, 0x2a004425); return dimm_mask; -#if 0 -# Intel clears top bit here, should we? -# No the default is on and for normal timming it should be on. Tom Z +/* + Intel clears top bit here, should we? + No the default is on and for normal timming it should be on. Tom Z andl $0x7f, %esi -#endif + */ -// HERE. WHat's the frequency kenneth? +/* HERE. WHat's the frequency kenneth? */ for(i = 0; i < DIMM_SOCKETS; i++) { if (!(dimm_mask & (1 << i))) { continue; @@ -1564,8 +1271,8 @@ static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask) #if 0 /* For now hardset everything at 128MB boundaries */ /* %ebp has the ram size in multiples of 64MB */ -// cmpl $0, %ebp /* test if there is no mem - smbus went bad */ -// jz no_memory_bad_smbus +/* cmpl $0, %ebp /* test if there is no mem - smbus went bad */*/ +/* jz no_memory_bad_smbus*/ if(memsz < 0x30) { /* I should really adjust all of this in C after I have resources * to all of the pcie devices. @@ -1603,7 +1310,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) { #if DEBUG_RAM_CONFIG print_debug(spd_pre_init); #endif - //activate_spd_rom(ctrl); + /*activate_spd_rom(ctrl);*/ dimm_mask = spd_detect_dimms(ctrl); if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) { print_debug("No memory for this controller\n"); @@ -1612,7 +1319,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) { dimm_mask = spd_enable_clocks(ctrl, dimm_mask); if (dimm_mask < 0) goto hw_spd_err; - //spd_verify_dimms(ctrl); + /*spd_verify_dimms(ctrl);*/ #if DEBUG_RAM_CONFIG print_debug(spd_pre_set); #endif @@ -1638,7 +1345,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) { #if DEBUG_RAM_CONFIG print_debug(spd_post_init); #endif - //moved from dram_post_init + /*moved from dram_post_init*/ spd_set_ram_size(ctrl, dimm_mask); dump_pci_device(PCI_DEV(0,0,1)); return; @@ -1663,76 +1370,17 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) { * Only 64M of each side of each DIMM is currently mapped, * so we can handle > 4GB of ram here. */ -#if 0 -#define bank_msg "Bank " -#define side_msg " Side " -static void verify_ram() { - xorl %ecx, %ecx - /* Check to see if the RAM is present, - * in the specified bank and side. - */ -1: movl %ecx, %ebx - shrl $1, %ebx - addl $((5<<8) | SMBUS_MEM_DEVICE_START), %ebx - CALLSP(smbus_read_byte) - jz 5f - testl $1, %ecx - jz 2f - cmpb $2, %al - jne 5f - - /* Display the bank and side we are spot checking. - */ -2: CONSOLE_INFO_TX_STRING($bank_msg) - movl %ecx, %ebx - shrl $1, %ebx - incl %ebx - CONSOLE_INFO_TX_HEX8(%bl) - CONSOLE_INFO_TX_STRING($side_msg) - movl %ecx, %ebx - andl $1, %ebx - CONSOLE_INFO_TX_HEX8(%bl) - - /* Compute the memory address to spot check. */ - movl %ecx, %ebx - xorl %eax, %eax -3: testl %ebx, %ebx - jz 4f - addl $0x04000000, %eax - decl %ebx - jmp 3b -4: - /* Spot check 512K of RAM */ - movl %eax, %ebx - addl $0x0007ffff, %ebx - CALLSP(spot_check) -5: - /* Now find the next bank and side to spot check */ - incl %ecx - cmpl $((SMBUS_MEM_DEVICE_END - SMBUS_MEM_DEVICE_START)<<1), %ecx - jb 1b - RET_LABEL(verify_ram) - -} -#endif -#if 0 static void ram_postinit(const struct mem_controller *ctrl) { #if DEBUG_RAM_CONFIG dumpnorth(); #endif - /* Include a test to verify that memory is more or less working o.k. - * This test is to catch programming errors and hardware that is out of - * spec, not a test to see if the memory dimms are working 100% - */ -//# CALL_LABEL(verify_ram) - spd_set_ram_size(ctrl); + /*spd_set_ram_size(ctrl);*/ } #define FIRST_NORMAL_REFERENCE() CALL_LABEL(ram_postinit) #define SPECIAL_FINISHUP() CALL_LABEL(dram_finish) -#endif #define ecc_pre_init "Initializing ECC state...\r\n" #define ecc_post_init "ECC state initialized.\r\n" @@ -1754,11 +1402,9 @@ static void dram_finish(const struct mem_controller *ctrl) #endif #if 0 /* Clear the ECC error bits */ - /* dword = pci_read_config32(ctrl->d0, 0x7c); /* FCS_EN */ dword |= (1<<17); pci_write_config32(ctrl->d0, 0x7c, dword); -*/ #endif } @@ -1766,44 +1412,8 @@ static void dram_finish(const struct mem_controller *ctrl) dumpnorth(); #endif -// verify_ram(); +/* verify_ram(); */ } -#if 0 -#define ERRFUNC(x, str) mem_err(x, str) - - -ERRFUNC(invalid_dimm_type, "Invalid dimm type") -ERRFUNC(spd_missing_data, "Missing sdram spd data") -ERRFUNC(spd_invalid_data, "Invalid sdram spd data") -ERRFUNC(spd_unsupported_data, "Unsupported sdram spd value") -ERRFUNC(unsupported_page_size, "Unsupported page size") -ERRFUNC(sdram_presence_mismatch, "DIMM presence mismatch") -ERRFUNC(sdram_value_mismatch, "spd data does not match") -ERRFUNC(unsupported_refresh_rate, "Unsuported spd refresh rate") -ERRFUNC(inconsistent_cas_latencies, "No cas latency supported by all dimms") -ERRFUNC(unsupported_rcd, "Unsupported ras to cas delay") -#undef ERRFUNC - -#define mem_err_err "ERROR: " -#define mem_err_pair " on dimm pair " -#define mem_err_byte " spd byte " -static void mem_err { - movl %ebx, %edi - CONSOLE_ERR_TX_STRING($mem_err_err) - CONSOLE_ERR_TX_STRING(%esi) - CONSOLE_ERR_TX_STRING($mem_err_pair) - movl %edi, %ebx - subb $(SMBUS_MEM_DEVICE_START), %bl - CONSOLE_ERR_TX_HEX8(%bl) - CONSOLE_ERR_TX_STRING($mem_err_byte) - movl %edi, %ebx - CONSOLE_ERR_TX_HEX8(%bh) - jmp mem_stop - -} - -#endif - #if ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG #define ram_enable_1 "Ram Enable 1\r\n" @@ -1821,10 +1431,24 @@ static void mem_err { /* Estimate that SLOW_DOWN_IO takes about 50&76us*/ /* delay for 200us */ +void udelay(int usecs) +{ + int i; + for(i = 0; i < usecs; i++) + outb(i&0xff, 0x80); +} -#define DO_DELAY \ + +#if 0 +static void DO_DELAY(void){ udelay(200); -// for(i=0; i<16;i++) { SLOW_DOWN_IO } +} +#endif + +#define DO_DELAY udelay(200); +/* + for(i=0; i<16;i++) { SLOW_DOWN_IO } + */ #define EXTRA_DELAY DO_DELAY @@ -1866,11 +1490,13 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) #endif RAM_NOP(ctrl); EXTRA_DELAY +#undef DEBUG_RAM_CONFIG #define DEBUG_RAM_CONFIG 0 /* 4 Precharge all */ #if DEBUG_RAM_CONFIG print_debug(ram_enable_4); #endif +#undef DEBUG_RAM_CONFIG #define DEBUG_RAM_CONFIG 0 RAM_PRECHARGE(ctrl); EXTRA_DELAY @@ -1947,14 +1573,14 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) RAM_NORMAL(ctrl); - // special from v1 - //FIRST_NORMAL_REFERENCE(); - //spd_set_ram_size(ctrl, 0x03); + /* special from v1*/ + /*FIRST_NORMAL_REFERENCE();*/ + /*spd_set_ram_size(ctrl, 0x03);*/ /* Finally enable refresh */ ENABLE_REFRESH(ctrl); - //SPECIAL_FINISHUP(); + /*SPECIAL_FINISHUP();*/ dram_finish(ctrl); { char *c = (char *) 0; *c = 'a'; |