Move several i945 config #defines from romstage.c to Kconfig.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5891 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 51 insertions, 17 deletions

diff --git a/src/northbridge/intel/i945/Kconfig b/src/northbridge/intel/i945/Kconfig
index 952bd9ed68..cee1a8745d 100644
--- a/src/northbridge/intel/i945/Kconfig
+++ b/src/northbridge/intel/i945/Kconfig
@@ -26,3 +26,41 @@ config FALLBACK_VGA_BIOS_ID
 	default "8086,27a2"
 	depends on NORTHBRIDGE_INTEL_I945
 
+choice
+	default I945GM
+	depends on NORTHBRIDGE_INTEL_I945
+	help
+	  Different i945 variants require slightly different setup.
+
+config I945GM
+	bool "i945GM (Mobile) chipset"
+
+config I945GC
+	bool "i945GC chipset"
+
+endchoice
+
+config CHANNEL_XOR_RANDOMIZATION
+	bool
+	default n
+	depends on NORTHBRIDGE_INTEL_I945
+
+config OVERRIDE_CLOCK_DISABLE
+	bool
+	default n
+	depends on NORTHBRIDGE_INTEL_I945
+	help
+	  Usually system firmware turns off system memory clock
+	  signals to unused SO-DIMM slots to reduce EMI and power
+	  consumption.
+	  However, some boards do not like unused clock signals to
+	  be disabled.
+
+config MAXIMUM_SUPPORTED_FREQUENCY
+	int
+	default 0
+	depends on NORTHBRIDGE_INTEL_I945
+	help
+	  If non-zero, this designates the maximum DDR frequency
+	  the board supports, despite what the chipset should be
+	  capable of.
diff --git a/src/northbridge/intel/i945/raminit.c b/src/northbridge/intel/i945/raminit.c
index 424fd2b6e9..50cab4929d 100644
--- a/src/northbridge/intel/i945/raminit.c
+++ b/src/northbridge/intel/i945/raminit.c
@@ -90,7 +90,7 @@ static void sdram_dump_mchbar_registers(void)
 static int memclk(void)
 {
 	int offset = 0;
-#ifdef CHIPSET_I945GM
+#if CONFIG_I945GM
 	offset++;
 #endif
 	switch (((MCHBAR32(CLKCFG) >> 4) & 7) - offset) {
@@ -102,7 +102,7 @@ static int memclk(void)
 	return -1;
 }
 
-#ifdef CHIPSET_I945GM
+#if CONFIG_I945GM
 static int fsbclk(void)
 {
 	switch (MCHBAR32(CLKCFG) & 7) {
@@ -114,7 +114,7 @@ static int fsbclk(void)
 	return -1;
 }
 #endif
-#ifdef CHIPSET_I945GC
+#if CONFIG_I945GC
 static int fsbclk(void)
 {
 	switch (MCHBAR32(CLKCFG) & 7) {
@@ -131,8 +131,8 @@ static int sdram_capabilities_max_supported_memory_frequency(void)
 {
 	u32 reg32;
 
-#ifdef MAXIMUM_SUPPORTED_FREQUENCY
-	return MAXIMUM_SUPPORTED_FREQUENCY;
+#if CONFIG_MAXIMUM_SUPPORTED_FREQUENCY
+	return CONFIG_MAXIMUM_SUPPORTED_FREQUENCY;
 #endif
 
 	reg32 = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xe4); /* CAPID0 + 4 */
@@ -1045,7 +1045,7 @@ static const u32 *slew_group_lookup(int dual_channel, int index)
 	return nc;
 }
 
-#ifdef CHIPSET_I945GM
+#if CONFIG_I945GM
 /* Strength multiplier tables */
 static const u8 dual_channel_strength_multiplier[] = {
 	0x44, 0x11, 0x11, 0x11, 0x44, 0x44, 0x44, 0x11,
@@ -1101,7 +1101,7 @@ static const u8 single_channel_strength_multiplier[] = {
 	0x33, 0x00, 0x11, 0x00, 0x44, 0x44, 0x33, 0x11
 };
 #endif
-#ifdef CHIPSET_I945GC
+#if CONFIG_I945GC
 static const u8 dual_channel_strength_multiplier[] = {
 	0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22,
 	0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22,
@@ -2155,7 +2155,7 @@ static void sdram_program_clock_crossing(void)
 	/**
 	 * We add the indices according to our clocks from CLKCFG.
 	 */
-#ifdef CHIPSET_I945GM
+#if CONFIG_I945GM
 	static const u32 data_clock_crossing[] = {
 		0x00100401, 0x00000000, /* DDR400 FSB400 */
 		0xffffffff, 0xffffffff, /*  nonexistant  */
@@ -2201,7 +2201,7 @@ static void sdram_program_clock_crossing(void)
 	};
 
 #endif
-#ifdef CHIPSET_I945GC
+#if CONFIG_I945GC
 	/* i945 G/P */
 	static const u32 data_clock_crossing[] = {
 		0xffffffff, 0xffffffff, /*  nonexistant  */
@@ -2420,7 +2420,7 @@ static void sdram_post_jedec_initialization(struct sys_info *sysinfo)
 	if (sysinfo->interleaved) {
 
 		reg32 = MCHBAR32(DCC);
-#if CHANNEL_XOR_RANDOMIZATION
+#if CONFIG_CHANNEL_XOR_RANDOMIZATION
 		reg32 &= ~(1 << 10);
 		reg32 |= (1 << 9);
 #else
@@ -2792,10 +2792,10 @@ static void sdram_enable_memory_clocks(struct sys_info *sysinfo)
 {
 	u8 clocks[2] = { 0, 0 };
 
-#ifdef CHIPSET_I945GM
+#if CONFIG_I945GM
 #define CLOCKS_WIDTH 2
 #endif
-#ifdef CHIPSET_I945GC
+#if CONFIG_I945GC
 #define CLOCKS_WIDTH 3
 #endif
 	if (sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED)
@@ -2810,15 +2810,11 @@ static void sdram_enable_memory_clocks(struct sys_info *sysinfo)
 	if (sysinfo->dimm[3] != SYSINFO_DIMM_NOT_POPULATED)
 		clocks[1] |= ((1 << CLOCKS_WIDTH)-1) << CLOCKS_WIDTH;
 
-#ifdef OVERRIDE_CLOCK_DISABLE
+#if CONFIG_OVERRIDE_CLOCK_DISABLE
 	/* Usually system firmware turns off system memory clock signals
 	 * to unused SO-DIMM slots to reduce EMI and power consumption.
 	 * However, the Kontron 986LCD-M does not like unused clock
 	 * signals to be disabled.
-	 * If other similar mainboard occur, it would make sense to make
-	 * this an entry in the sysinfo structure, and pre-initialize that
-	 * structure in the mainboard's romstage.c main() function.
-	 * For now an #ifdef will do.
 	 */
 
 	clocks[0] = 0xf; /* force all clock gate pairs to enable */