summaryrefslogtreecommitdiff
path: root/src/northbridge/intel
diff options
context:
space:
mode:
authorJoseph Smith <joe@settoplinux.org>2008-06-22 04:22:46 +0000
committerJoseph Smith <joe@smittys.pointclark.net>2008-06-22 04:22:46 +0000
commit14669ae023e9bb502866e9a49fb0577870dbda80 (patch)
tree9df89fc2fc586471f4bad7b4880f425686ca9dc3 /src/northbridge/intel
parent67939dc75fa9147708251bdd40f1ddb3bf684414 (diff)
downloadcoreboot-14669ae023e9bb502866e9a49fb0577870dbda80.tar.xz
This patch allows support for multiple so-dimms, single or double sided.
Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3380 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/intel')
-rw-r--r--src/northbridge/intel/i82830/raminit.c96
1 files changed, 46 insertions, 50 deletions
diff --git a/src/northbridge/intel/i82830/raminit.c b/src/northbridge/intel/i82830/raminit.c
index 1deb2572c8..b6e8661745 100644
--- a/src/northbridge/intel/i82830/raminit.c
+++ b/src/northbridge/intel/i82830/raminit.c
@@ -53,7 +53,7 @@ Macros and definitions.
* 0x2 for Refresh interval 7.8 us for 133MHz
* 0x7 /* Refresh interval 128 Clocks. (Fast Refresh Mode)
*/
-#define RAM_COMMAND_REFRESH 0x2
+#define RAM_COMMAND_REFRESH 0x1
/* DRC[6:4] - SDRAM Mode Select (SMS). */
#define RAM_COMMAND_SELF_REFRESH 0x0
@@ -76,7 +76,7 @@ static void do_ram_command(const struct mem_controller *ctrl, uint32_t command,
uint32_t addr_offset)
{
int i;
- uint8_t reg8, reg8_2 = 0;
+ uint8_t dimm_start, dimm_end;
uint32_t reg32;
/* Configure the RAM command. */
@@ -84,28 +84,27 @@ static void do_ram_command(const struct mem_controller *ctrl, uint32_t command,
/* Clear bits 29, 10-8, 6-4. */
reg32 &= 0xdffff88f;
reg32 |= command << 4;
- /* If RAM_COMMAND_NORMAL set the refresh mode and IC bit. */
- if (command == RAM_COMMAND_NORMAL)
- reg32 |= ((RAM_COMMAND_REFRESH << 8) | (RAM_COMMAND_IC << 29));
pci_write_config32(ctrl->d0, DRC, reg32);
- /* RAM_COMMAND_NORMAL affects only the memory controller and
- doesn't need to be "sent" to the DIMMs. */
- /* if (command == RAM_COMMAND_NORMAL) return; */
-
- PRINT_DEBUG(" Sending RAM command 0x");
- PRINT_DEBUG_HEX32(reg32);
- PRINT_DEBUG(" to 0x");
- PRINT_DEBUG_HEX32(0 + addr_offset);
- PRINT_DEBUG("\r\n");
-
- /* NOTE: Dual-sided ready. */
- read32(0 + addr_offset);
- for (i = 0; i < 4; i++) {
- reg8 = pci_read_config8(ctrl->d0, DRB + i);
- if (reg8 != reg8_2)
- read32(reg8 * 32 * 1024 * 1024);
- reg8_2 = reg8;
+ /* Send the ram command to each row of memory.
+ * (DIMM_SOCKETS * 2) is the maximum number of rows possible.
+ * Note: Each DRB defines the upper boundary address of
+ * each SDRAM row in 32-MB granularity.
+ */
+ dimm_start = 0;
+
+ for (i = 0; i < (DIMM_SOCKETS * 2); i++) {
+ dimm_end = pci_read_config8(ctrl->d0, DRB + i);
+ if (dimm_end > dimm_start) {
+ PRINT_DEBUG(" Sending RAM command 0x");
+ PRINT_DEBUG_HEX32(reg32);
+ PRINT_DEBUG(" to 0x");
+ PRINT_DEBUG_HEX32((dimm_start * 32 * 1024 * 1024) + addr_offset);
+ PRINT_DEBUG("\r\n");
+ read32((dimm_start * 32 * 1024 * 1024) + addr_offset);
+ }
+ /* Set the start of the next DIMM. */
+ dimm_start = dimm_end;
}
}
@@ -316,38 +315,28 @@ static void set_dram_row_attributes(const struct mem_controller *ctrl)
value = spd_read_byte(device, 5);
if (value == 1) {
- switch (dra) {
- case 2: /* 2KB */
- dra = 0xF0;
- break;
- case 4: /* 4KB */
- dra = 0xF1;
- break;
- case 8: /* 8KB */
- dra = 0xF2;
- break;
- case 16: /* 16KB */
- dra = 0xF3;
- break;
- default:
+ if (dra == 2) {
+ dra = 0xF0; /* 2KB */
+ } else if (dra == 4) {
+ dra = 0xF1; /* 4KB */
+ } else if (dra == 8) {
+ dra = 0xF2; /* 8KB */
+ } else if (dra == 16) {
+ dra = 0xF3; /* 16KB */
+ } else {
print_err("Page size not supported\r\n");
die("HALT\r\n");
}
} else if (value == 2) {
- switch (dra) {
- case 2: /* 2KB */
- dra = 0x00;
- break;
- case 4: /* 4KB */
- dra = 0x11;
- break;
- case 8: /* 8KB */
- dra = 0x22;
- break;
- case 16: /* 16KB */
- dra = 0x33;
- break;
- default:
+ if (dra == 2) {
+ dra = 0x00; /* 2KB */
+ } else if (dra == 4) {
+ dra = 0x11; /* 4KB */
+ } else if (dra == 8) {
+ dra = 0x22; /* 8KB */
+ } else if (dra == 16) {
+ dra = 0x33; /* 16KB */
+ } else {
print_err("Page size not supported\r\n");
die("HALT\r\n");
}
@@ -471,6 +460,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
static void sdram_enable(int controllers, const struct mem_controller *ctrl)
{
int i;
+ uint32_t reg32;
/* 0. Wait until power/voltages and clocks are stable (200us). */
udelay(200);
@@ -503,6 +493,12 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
do_ram_command(ctrl, RAM_COMMAND_NORMAL, 0);
udelay(1);
+ /* 6. Enable refresh and Set initialization complete. */
+ PRINT_DEBUG("RAM Enable 6: Enable Refresh and IC\r\n");
+ reg32 = pci_read_config32(ctrl->d0, DRC);
+ reg32 |= ((RAM_COMMAND_REFRESH << 8) | (RAM_COMMAND_IC << 29));
+ pci_write_config32(ctrl->d0, DRC, reg32);
+
PRINT_DEBUG("Northbridge following SDRAM init:\r\n");
DUMPNORTH();
}