summaryrefslogtreecommitdiff
path: root/src/northbridge/intel
diff options
context:
space:
mode:
authorEd Swierk <eswierk@arastra.com>2008-09-24 15:06:34 +0000
committerEd Swierk <eswierk@arastra.com>2008-09-24 15:06:34 +0000
commitf69d5ee13ca2e3d9437b2b9ff6370a8800efc9f9 (patch)
tree4f574c4e304bf3b71f42c8e7802dad0eb9b3350b /src/northbridge/intel
parent22d5ddcd097010eead86750146a41908a436f801 (diff)
downloadcoreboot-f69d5ee13ca2e3d9437b2b9ff6370a8800efc9f9.tar.xz
Support for the memory controller and PCIe interface of the Intel
EP80579 Integrated Processor (codename "Tolapai"). The memory controller code supports only 64-bit-wide DIMMs with x8 devices and ECC. It has been tested on a development board using a single Micron MT9HTF6472PY-667D2 DIMM. Your mileage will definitely vary with other DIMMs. Signed-off-by: Ed Swierk <eswierk@arastra.com> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3600 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/intel')
-rw-r--r--src/northbridge/intel/i3100/ep80579.h64
-rw-r--r--src/northbridge/intel/i3100/raminit_ep80579.c795
-rw-r--r--src/northbridge/intel/i3100/raminit_ep80579.h31
3 files changed, 890 insertions, 0 deletions
diff --git a/src/northbridge/intel/i3100/ep80579.h b/src/northbridge/intel/i3100/ep80579.h
new file mode 100644
index 0000000000..150cbb4528
--- /dev/null
+++ b/src/northbridge/intel/i3100/ep80579.h
@@ -0,0 +1,64 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Arastra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef NORTHBRIDGE_INTEL_I3100_EP80579_H
+#define NORTHBRIDGE_INTEL_I3100_EP80579_H
+
+#define SMRBASE 0x14
+#define MCHCFG0 0x50
+#define FDHC 0x58
+#define PAM 0x59
+#define DRB 0x60
+#define DRT1 0x64
+#define DRA 0x70
+#define DRT0 0x78
+#define DRC 0x7c
+#define ECCDIAG 0x84
+#define SDRC 0x88
+#define CKDIS 0x8c
+#define CKEDIS 0x8d
+#define DEVPRES 0x9c
+#define DEVPRES_D0F0 (1 << 0)
+#define DEVPRES_D1F0 (1 << 1)
+#define DEVPRES_D2F0 (1 << 2)
+#define DEVPRES_D3F0 (1 << 3)
+#define DEVPRES_D4F0 (1 << 4)
+#define DEVPRES_D10F0 (1 << 5)
+#define EXSMRC 0x9d
+#define SMRAM 0x9e
+#define EXSMRAMC 0x9f
+#define DDR2ODTC 0xb0
+#define TOLM 0xc4
+#define REMAPBASE 0xc6
+#define REMAPLIMIT 0xc8
+#define REMAPOFFSET 0xca
+#define TOM 0xcc
+#define HECBASE 0xce
+#define DEVPRES1 0xf4
+
+#define DCALCSR 0x040
+#define DCALADDR 0x044
+#define DCALDATA 0x048
+#define MBCSR 0x140
+#define MBADDR 0x144
+#define MBDATA 0x148
+#define DDRIOMC2 0x268
+
+#endif
diff --git a/src/northbridge/intel/i3100/raminit_ep80579.c b/src/northbridge/intel/i3100/raminit_ep80579.c
new file mode 100644
index 0000000000..c871856c7a
--- /dev/null
+++ b/src/northbridge/intel/i3100/raminit_ep80579.c
@@ -0,0 +1,795 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2005 Eric W. Biederman and Tom Zimmerman
+ * Copyright (C) 2008 Arastra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <cpu/x86/mem.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/x86/cache.h>
+#include "raminit_ep80579.h"
+#include "ep80579.h"
+
+#define BAR 0x90000000
+
+static void sdram_set_registers(const struct mem_controller *ctrl)
+{
+ static const u32 register_values[] = {
+ PCI_ADDR(0, 0x00, 0, CKDIS), 0xffff0000, 0x0000ffff,
+ PCI_ADDR(0, 0x00, 0, DEVPRES), 0x00000000, 0x07420801 | DEVPRES_CONFIG,
+ PCI_ADDR(0, 0x00, 0, PAM-1), 0xcccccc7f, 0x33333000,
+ PCI_ADDR(0, 0x00, 0, PAM+3), 0xcccccccc, 0x33333333,
+ PCI_ADDR(0, 0x00, 0, DEVPRES1), 0xffffffff, 0x0040003a,
+ PCI_ADDR(0, 0x00, 0, SMRBASE), 0x00000fff, BAR | 0,
+ };
+ int i;
+ int max;
+
+ for (i = 0; i < ARRAY_SIZE(register_values); i += 3) {
+ device_t dev;
+ u32 where;
+ u32 reg;
+ dev = (register_values[i] & ~0xff) - PCI_DEV(0, 0x00, 0) + ctrl->f0;
+ where = register_values[i] & 0xff;
+ reg = pci_read_config32(dev, where);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2];
+ pci_write_config32(dev, where, reg);
+ }
+}
+
+struct dimm_size {
+ u32 side1;
+ u32 side2;
+};
+
+static struct dimm_size spd_get_dimm_size(u16 device)
+{
+ /* Calculate the log base 2 size of a DIMM in bits */
+ struct dimm_size sz;
+ int value, low, ddr2;
+ sz.side1 = 0;
+ sz.side2 = 0;
+
+ /* Note it might be easier to use byte 31 here, it has the DIMM size as
+ * a multiple of 4MB. The way we do it now we can size both
+ * sides of an assymetric dimm.
+ */
+ value = spd_read_byte(device, SPD_NUM_ROWS);
+ if (value < 0) goto hw_err;
+ if ((value & 0xf) == 0) goto val_err;
+ sz.side1 += value & 0xf;
+
+ value = spd_read_byte(device, SPD_NUM_COLUMNS);
+ if (value < 0) goto hw_err;
+ if ((value & 0xf) == 0) goto val_err;
+ sz.side1 += value & 0xf;
+
+ value = spd_read_byte(device, SPD_NUM_BANKS_PER_SDRAM);
+ if (value < 0) goto hw_err;
+ if ((value & 0xff) == 0) goto val_err;
+ sz.side1 += log2(value & 0xff);
+
+ /* Get the module data width and convert it to a power of two */
+ value = spd_read_byte(device, SPD_MODULE_DATA_WIDTH_MSB);
+ if (value < 0) goto hw_err;
+ value &= 0xff;
+ value <<= 8;
+
+ low = spd_read_byte(device, SPD_MODULE_DATA_WIDTH_LSB);
+ if (low < 0) goto hw_err;
+ value = value | (low & 0xff);
+ if ((value != 72) && (value != 64)) goto val_err;
+ sz.side1 += log2(value);
+
+ /* side 2 */
+ value = spd_read_byte(device, SPD_NUM_DIMM_BANKS);
+
+ if (value < 0) goto hw_err;
+ value &= 7;
+ value++;
+ if (value == 1) goto out;
+ if (value != 2) goto val_err;
+
+ /* Start with the symmetrical case */
+ sz.side2 = sz.side1;
+
+ value = spd_read_byte(device, SPD_NUM_ROWS);
+ if (value < 0) goto hw_err;
+ if ((value & 0xf0) == 0) goto out; /* If symmetrical we are done */
+ sz.side2 -= (value & 0x0f); /* Subtract out rows on side 1 */
+ sz.side2 += ((value >> 4) & 0x0f); /* Add in rows on side 2 */
+
+ value = spd_read_byte(device, SPD_NUM_COLUMNS);
+ if (value < 0) goto hw_err;
+ if ((value & 0xff) == 0) goto val_err;
+ sz.side2 -= (value & 0x0f); /* Subtract out columns on side 1 */
+ sz.side2 += ((value >> 4) & 0x0f); /* Add in columns on side 2 */
+ goto out;
+
+ val_err:
+ die("Bad SPD value\r\n");
+ /* If an hw_error occurs report that I have no memory */
+ hw_err:
+ sz.side1 = 0;
+ sz.side2 = 0;
+ out:
+ print_debug("dimm ");
+ print_debug_hex8(device);
+ print_debug(" size = ");
+ print_debug_hex8(sz.side1);
+ print_debug(".");
+ print_debug_hex8(sz.side2);
+ print_debug("\r\n");
+ return sz;
+
+}
+
+static long spd_set_ram_size(const struct mem_controller *ctrl, u8 dimm_mask)
+{
+ int i;
+ int cum;
+
+ for (i = cum = 0; i < DIMM_SOCKETS; i++) {
+ struct dimm_size sz;
+ if (dimm_mask & (1 << i)) {
+ sz = spd_get_dimm_size(ctrl->channel0[i]);
+ if (sz.side1 < 29) {
+ return -1; /* Report SPD error */
+ }
+ /* convert bits to multiples of 64MB */
+ sz.side1 -= 29;
+ cum += (1 << sz.side1);
+ pci_write_config8(ctrl->f0, DRB + (i*2), cum);
+ pci_write_config8(ctrl->f0, DRB+1 + (i*2), cum);
+ if (spd_read_byte(ctrl->channel0[i], SPD_NUM_DIMM_BANKS) & 0x1) {
+ cum <<= 1;
+ }
+ }
+ else {
+ pci_write_config8(ctrl->f0, DRB + (i*2), cum);
+ pci_write_config8(ctrl->f0, DRB+1 + (i*2), cum);
+ }
+ }
+ print_debug("DRB = ");
+ print_debug_hex32(pci_read_config32(ctrl->f0, DRB));
+ print_debug("\r\n");
+
+ cum >>= 1;
+ /* set TOM top of memory */
+ pci_write_config16(ctrl->f0, TOM, cum);
+ print_debug("TOM = ");
+ print_debug_hex16(cum);
+ print_debug("\r\n");
+ /* set TOLM top of low memory */
+ if (cum > 0x18) {
+ cum = 0x18;
+ }
+ cum <<= 11;
+ pci_write_config16(ctrl->f0, TOLM, cum);
+ print_debug("TOLM = ");
+ print_debug_hex16(cum);
+ print_debug("\r\n");
+ return 0;
+}
+
+
+static u8 spd_detect_dimms(const struct mem_controller *ctrl)
+{
+ u8 dimm_mask = 0;
+ int i;
+ for (i = 0; i < DIMM_SOCKETS; i++) {
+ int byte;
+ u16 device;
+ device = ctrl->channel0[i];
+ if (device) {
+ byte = spd_read_byte(device, SPD_MEMORY_TYPE);
+ print_debug("spd ");
+ print_debug_hex8(device);
+ print_debug(" = ");
+ print_debug_hex8(byte);
+ print_debug("\r\n");
+ if (byte == 8) {
+ dimm_mask |= (1 << i);
+ }
+ }
+ }
+ return dimm_mask;
+}
+
+
+static int spd_set_row_attributes(const struct mem_controller *ctrl,
+ u8 dimm_mask)
+{
+ int value;
+ int i;
+
+ for (i = 0; i < DIMM_SOCKETS; i++) {
+ u32 dra = 0;
+ int reg = 0;
+
+ if (!(dimm_mask & (1 << i))) {
+ continue;
+ }
+
+ value = spd_read_byte(ctrl->channel0[i], SPD_NUM_ROWS);
+ if (value < 0) die("Bad SPD data\r\n");
+ if ((value & 0xf) == 0) die("Invalid # of rows\r\n");
+ dra |= (((value-13) & 0x7) << 23);
+ dra |= (((value-13) & 0x7) << 29);
+ reg += value & 0xf;
+
+ value = spd_read_byte(ctrl->channel0[i], SPD_NUM_COLUMNS);
+ if (value < 0) die("Bad SPD data\r\n");
+ if ((value & 0xf) == 0) die("Invalid # of columns\r\n");
+ dra |= (((value-10) & 0x7) << 20);
+ dra |= (((value-10) & 0x7) << 26);
+ reg += value & 0xf;
+
+ value = spd_read_byte(ctrl->channel0[i], SPD_NUM_BANKS_PER_SDRAM);
+ if (value < 0) die("Bad SPD data\r\n");
+ if ((value & 0xff) == 0) die("Invalid # of banks\r\n");
+ reg += log2(value & 0xff);
+
+ print_debug("dimm ");
+ print_debug_hex8(i);
+ print_debug(" reg = ");
+ print_debug_hex8(reg);
+ print_debug("\r\n");
+
+ /* set device density */
+ dra |= ((31-reg));
+ dra |= ((31-reg) << 6);
+
+ /* set device width (x8) */
+ dra |= (1 << 4);
+ dra |= (1 << 10);
+
+ /* set device type (registered) */
+ dra |= (1 << 14);
+
+ /* set number of ranks (0=single, 1=dual) */
+ value = spd_read_byte(ctrl->channel0[i], SPD_NUM_DIMM_BANKS);
+ dra |= ((value & 0x1) << 17);
+
+ print_debug("DRA");
+ print_debug_hex8(i);
+ print_debug(" = ");
+ print_debug_hex32(dra);
+ print_debug("\r\n");
+
+ pci_write_config32(ctrl->f0, DRA + (i*4), dra);
+ }
+ return 0;
+}
+
+
+static u32 spd_set_drt_attributes(const struct mem_controller *ctrl,
+ u8 dimm_mask, u32 drc)
+{
+ int i;
+ u32 val, val1;
+ u32 cl;
+ u32 trc = 0;
+ u32 trfc = 0;
+ u32 tras = 0;
+ u32 trtp = 0;
+ u32 twtr = 0;
+ int index = drc & 0x00000003;
+ int ci;
+ static const u8 latencies[] = { /* 533, 800, 400, 667 */
+ 0x10, 0x60, 0x10, 0x20 };
+ static const u32 drt0[] = { /* 533, 800, 400, 667 */
+ 0x24240002, 0x24360002, 0x24220002, 0x24360002 };
+ static const u32 drt1[] = { /* 533, 800, 400, 667 */
+ 0x00400000, 0x00900000, 0x00200000, 0x00700000 };
+ static const u32 magic[] = { /* 533, 800, 400, 667 */
+ 0x007b8221, 0x00b94331, 0x005ca1a1, 0x009a62b1 };
+ static const u32 mrs[] = { /* 533, 800, 400, 667 */
+ 0x07020000, 0x0b020000, 0x05020000, 0x09020000 };
+ static const int cycle[] = { /* 533, 800, 400, 667 */
+ 15, 10, 20, 12 }; /* cycle time in 1/4 ns units */
+ static const int byte40rem[] = {
+ 0, 1, 2, 2, 3, 3, 0, 0 }; /* byte 40 remainder in 1/4 ns units */
+
+ /* CAS latency in cycles */
+ val = latencies[index];
+ for (i = 0; i < DIMM_SOCKETS; i++) {
+ if (!(dimm_mask & (1 << i)))
+ continue;
+ val &= spd_read_byte(ctrl->channel0[i], SPD_ACCEPTABLE_CAS_LATENCIES);
+ }
+ if (val & 0x10)
+ cl = 4;
+ else if (val & 0x20)
+ cl = 5;
+ else if (val & 0x40)
+ cl = 6;
+ else
+ die("CAS latency mismatch\r\n");
+ print_debug("cl = ");
+ print_debug_hex8(cl);
+ print_debug("\r\n");
+
+ ci = cycle[index];
+
+ /* Trc, Trfc in cycles */
+ for (i = 0; i < DIMM_SOCKETS; i++) {
+ if (!(dimm_mask & (1 << i)))
+ continue;
+ val1 = spd_read_byte(ctrl->channel0[i], SPD_BYTE_41_42_EXTENSION);
+ val = spd_read_byte(ctrl->channel0[i], SPD_MIN_ACT_TO_ACT_AUTO_REFRESH);
+ val <<= 2; /* convert to 1/4 ns */
+ val += byte40rem[(val1 >> 4) & 0x7];
+ val = (val + ci - 1) / ci + 1; /* convert to cycles */
+ if (trc < val)
+ trc = val;
+ val = spd_read_byte(ctrl->channel0[i], SPD_MIN_AUTO_REFRESH_TO_ACT);
+ val <<= 2; /* convert to 1/4 ns */
+ if (val1 & 0x01)
+ val += 1024;
+ val += byte40rem[(val1 >> 1) & 0x7];
+ val = (val + ci - 1) / ci; /* convert to cycles */
+ if (trfc < val)
+ trfc = val;
+ }
+ print_debug("trc = ");
+ print_debug_hex8(trc);
+ print_debug("\r\n");
+ print_debug("trfc = ");
+ print_debug_hex8(trfc);
+ print_debug("\r\n");
+
+ /* Tras, Trtp, Twtr in cycles */
+ for (i = 0; i < DIMM_SOCKETS; i++) {
+ if (!(dimm_mask & (1 << i)))
+ continue;
+ val = spd_read_byte(ctrl->channel0[i], SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY);
+ val <<= 2; /* convert to 1/4 ns */
+ val = (val + ci - 1) / ci; /* convert to cycles */
+ if (tras < val)
+ tras = val;
+ val = spd_read_byte(ctrl->channel0[i], SPD_INT_READ_TO_PRECHARGE_DELAY);
+ val = (val + ci - 1) / ci; /* convert to cycles */
+ if (trtp < val)
+ trtp = val;
+ val = spd_read_byte(ctrl->channel0[i], SPD_INT_WRITE_TO_READ_DELAY);
+ val = (val + ci - 1) / ci; /* convert to cycles */
+ if (twtr < val)
+ twtr = val;
+ }
+ print_debug("tras = ");
+ print_debug_hex8(tras);
+ print_debug("\r\n");
+ print_debug("trtp = ");
+ print_debug_hex8(trtp);
+ print_debug("\r\n");
+ print_debug("twtr = ");
+ print_debug_hex8(twtr);
+ print_debug("\r\n");
+
+ val = (drt0[index] | ((trc - 11) << 12) | ((cl - 3) << 9)
+ | ((cl - 3) << 6) | ((cl - 3) << 3));
+ print_debug("drt0 = ");
+ print_debug_hex32(val);
+ print_debug("\r\n");
+ pci_write_config32(ctrl->f0, DRT0, val);
+
+ val = (drt1[index] | ((tras - 8) << 28) | ((trtp - 2) << 25)
+ | (twtr << 15));
+ print_debug("drt1 = ");
+ print_debug_hex32(val);
+ print_debug("\r\n");
+ pci_write_config32(ctrl->f0, DRT1, val);
+
+ val = (magic[index]);
+ print_debug("magic = ");
+ print_debug_hex32(val);
+ print_debug("\r\n");
+ pci_write_config32(PCI_DEV(0, 0x08, 0), 0xcc, val);
+
+ val = (mrs[index] | (cl << 20));
+ print_debug("mrs = ");
+ print_debug_hex32(val);
+ print_debug("\r\n");
+ return val;
+}
+
+static int spd_set_dram_controller_mode(const struct mem_controller *ctrl,
+ u8 dimm_mask)
+{
+ int value;
+ int drc = 0;
+ int i;
+ msr_t msr;
+ u8 cycle = 0x25;
+
+ for (i = 0; i < DIMM_SOCKETS; i++) {
+ if (!(dimm_mask & (1 << i)))
+ continue;
+ if ((spd_read_byte(ctrl->channel0[i], SPD_MODULE_DATA_WIDTH_LSB) & 0xf0) != 0x40)
+ die("ERROR: Only 64-bit DIMMs supported\r\n");
+ if (!(spd_read_byte(ctrl->channel0[i], SPD_DIMM_CONFIG_TYPE) & 0x02))
+ die("ERROR: Only ECC DIMMs supported\r\n");
+ if (spd_read_byte(ctrl->channel0[i], SPD_PRIMARY_SDRAM_WIDTH) != 0x08)
+ die("ERROR: Only x8 DIMMs supported\r\n");
+
+ value = spd_read_byte(ctrl->channel0[i], SPD_MIN_CYCLE_TIME_AT_CAS_MAX);
+ if (value > cycle)
+ cycle = value;
+ }
+ print_debug("cycle = ");
+ print_debug_hex8(cycle);
+ print_debug("\r\n");
+
+ drc |= (1 << 20); /* enable ECC */
+ drc |= (3 << 30); /* enable CKE on each DIMM */
+ drc |= (1 << 4); /* enable CKE globally */
+
+ /* TODO check: */
+ /* set front side bus speed */
+ msr = rdmsr(0xcd); /* returns 0 on Pentium M 90nm */
+ print_debug("msr 0xcd = ");
+ print_debug_hex32(msr.hi);
+ print_debug_hex32(msr.lo);
+ print_debug("\r\n");
+
+ /* TODO check that this msr really indicates fsb speed! */
+ if (msr.lo & 0x07) {
+ print_info("533 MHz FSB\r\n");
+ if (cycle <= 0x25) {
+ drc |= 0x5;
+ print_info("400 MHz DDR\r\n");
+ } else if (cycle <= 0x30) {
+ drc |= 0x7;
+ print_info("333 MHz DDR\r\n");
+ } else if (cycle <= 0x3d) {
+ drc |= 0x4;
+ print_info("266 MHz DDR\r\n");
+ } else {
+ drc |= 0x2;
+ print_info("200 MHz DDR\r\n");
+ }
+ }
+ else {
+ print_info("400 MHz FSB\r\n");
+ if (cycle <= 0x30) {
+ drc |= 0x7;
+ print_info("333 MHz DDR\r\n");
+ } else if (cycle <= 0x3d) {
+ drc |= 0x0;
+ print_info("266 MHz DDR\r\n");
+ } else {
+ drc |= 0x2;
+ print_info("200 MHz DDR\r\n");
+ }
+ }
+
+ print_debug("DRC = ");
+ print_debug_hex32(drc);
+ print_debug("\r\n");
+
+ return drc;
+}
+
+static void sdram_set_spd_registers(const struct mem_controller *ctrl)
+{
+ u8 dimm_mask;
+ int i;
+
+ /* Test if we can read the SPD */
+ dimm_mask = spd_detect_dimms(ctrl);
+ if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) {
+ print_err("No memory for this cpu\r\n");
+ return;
+ }
+ return;
+}
+
+static void set_on_dimm_termination_enable(const struct mem_controller *ctrl)
+{
+ u8 c1,c2;
+ u32 dimm,i;
+ u32 data32;
+ u32 t4;
+
+ /* Set up northbridge values */
+ /* ODT enable */
+ pci_write_config32(ctrl->f0, SDRC, 0xa0002c30);
+
+ c1 = pci_read_config8(ctrl->f0, DRB);
+ c2 = pci_read_config8(ctrl->f0, DRB+2);
+ if (c1 == c2) {
+ /* 1 single-rank DIMM */
+ data32 = 0x00000010;
+ }
+ else {
+ /* 2 single-rank DIMMs or 1 double-rank DIMM */
+ data32 = 0x00002010;
+ }
+
+ print_debug("ODT Value = ");
+ print_debug_hex32(data32);
+ print_debug("\r\n");
+
+ pci_write_config32(ctrl->f0, DDR2ODTC, data32);
+
+ for (i = 0; i < 2; i++) {
+ print_debug("ODT CS");
+ print_debug_hex8(i);
+ print_debug("\r\n");
+
+ write32(BAR+DCALADDR, 0x0b840001);
+ write32(BAR+DCALCSR, 0x80000003 | ((i+1)<<21));
+ data32 = read32(BAR+DCALCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+DCALCSR);
+ }
+}
+
+
+static void dump_dcal_regs(void)
+{
+ int i;
+ for (i = 0x0; i < 0x2a0; i += 4) {
+ if ((i % 16) == 0) {
+ print_debug("\r\n");
+ print_debug_hex16(i);
+ print_debug(": ");
+ }
+ print_debug_hex32(read32(BAR+i));
+ print_debug(" ");
+ }
+ print_debug("\r\n");
+}
+
+
+static void sdram_enable(int controllers, const struct mem_controller *ctrl)
+{
+ int i;
+ int cs;
+ long mask;
+ u32 drc;
+ u32 data32;
+ u32 mode_reg;
+ msr_t msr;
+ u16 data16;
+
+ mask = spd_detect_dimms(ctrl);
+ print_debug("Starting SDRAM Enable\r\n");
+
+ /* Set DRAM type and Front Side Bus frequency */
+ drc = spd_set_dram_controller_mode(ctrl, mask);
+ if (drc == 0) {
+ die("Error calculating DRC\r\n");
+ }
+ data32 = drc & ~(3 << 20); /* clear ECC mode */
+ data32 = data32 | (3 << 5); /* temp turn off ODT */
+ /* Set DRAM controller mode */
+ pci_write_config32(ctrl->f0, DRC, data32);
+
+ /* Turn the clocks on */
+ pci_write_config16(ctrl->f0, CKDIS, 0x0000);
+
+ /* Program row size */
+ spd_set_ram_size(ctrl, mask);
+
+ /* Program row attributes */
+ spd_set_row_attributes(ctrl, mask);
+
+ /* Program timing values */
+ mode_reg = spd_set_drt_attributes(ctrl, mask, drc);
+
+ dump_dcal_regs();
+
+ /* Apply NOP */
+ for (cs = 0; cs < 2; cs++) {
+ print_debug("NOP CS");
+ print_debug_hex8(cs);
+ print_debug("\r\n");
+ udelay(16);
+ write32(BAR+DCALCSR, (0x00000000 | ((cs+1)<<21)));
+ write32(BAR+DCALCSR, (0x80000000 | ((cs+1)<<21)));
+ data32 = read32(BAR+DCALCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+DCALCSR);
+ }
+
+ /* Apply NOP */
+ udelay(16);
+ for (cs = 0; cs < 2; cs++) {
+ print_debug("NOP CS");
+ print_debug_hex8(cs);
+ print_debug("\r\n");
+ write32(BAR + DCALCSR, (0x80000000 | ((cs+1)<<21)));
+ data32 = read32(BAR+DCALCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+DCALCSR);
+ }
+
+ /* Precharge all banks */
+ udelay(16);
+ for (cs = 0; cs < 2; cs++) {
+ print_debug("Precharge CS");
+ print_debug_hex8(cs);
+ print_debug("\r\n");
+ write32(BAR+DCALADDR, 0x04000000);
+ write32(BAR+DCALCSR, (0x80000002 | ((cs+1)<<21)));
+ data32 = read32(BAR+DCALCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+DCALCSR);
+ }
+
+ /* EMRS: Enable DLLs, set OCD calibration mode to default */
+ udelay(16);
+ for (cs = 0; cs < 2; cs++) {
+ print_debug("EMRS CS");
+ print_debug_hex8(cs);
+ print_debug("\r\n");
+ write32(BAR+DCALADDR, 0x0b840001);
+ write32(BAR+DCALCSR, (0x80000003 | ((cs+1)<<21)));
+ data32 = read32(BAR+DCALCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+DCALCSR);
+ }
+ /* MRS: Reset DLLs */
+ udelay(16);
+ for (cs = 0; cs < 2; cs++) {
+ print_debug("MRS CS");
+ print_debug_hex8(cs);
+ print_debug("\r\n");
+ write32(BAR+DCALADDR, mode_reg);
+ write32(BAR+DCALCSR, (0x80000003 | ((cs+1)<<21)));
+ data32 = read32(BAR+DCALCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+DCALCSR);
+ }
+
+ /* Precharge all banks */
+ udelay(48);
+ for (cs = 0; cs < 2; cs++) {
+ print_debug("Precharge CS");
+ print_debug_hex8(cs);
+ print_debug("\r\n");
+ write32(BAR+DCALADDR, 0x04000000);
+ write32(BAR+DCALCSR, (0x80000002 | ((cs+1)<<21)));
+ data32 = read32(BAR+DCALCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+DCALCSR);
+ }
+
+ /* Do 2 refreshes */
+ for (i = 0; i < 2; i++) {
+ udelay(16);
+ for (cs = 0; cs < 2; cs++) {
+ print_debug("Refresh CS");
+ print_debug_hex8(cs);
+ print_debug("\r\n");
+ write32(BAR+DCALCSR, (0x80000001 | ((cs+1)<<21)));
+ data32 = read32(BAR+DCALCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+DCALCSR);
+ }
+ }
+
+ /* MRS: Set DLLs to normal */
+ udelay(16);
+ for (cs = 0; cs < 2; cs++) {
+ print_debug("MRS CS");
+ print_debug_hex8(cs);
+ print_debug("\r\n");
+ write32(BAR+DCALADDR, (mode_reg & ~(1<<24)));
+ write32(BAR+DCALCSR, (0x80000003 | ((cs+1)<<21)));
+ data32 = read32(BAR+DCALCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+DCALCSR);
+ }
+
+ /* EMRS: Enable DLLs */
+ udelay(16);
+ for (cs = 0; cs < 2; cs++) {
+ print_debug("EMRS CS");
+ print_debug_hex8(cs);
+ print_debug("\r\n");
+ write32(BAR+DCALADDR, 0x0b840001);
+ write32(BAR+DCALCSR, (0x80000003 | ((cs+1)<<21)));
+ data32 = read32(BAR+DCALCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+DCALCSR);
+ }
+
+ udelay(16);
+ /* No command */
+ write32(BAR+DCALCSR, 0x0000000f);
+
+ write32(BAR, 0x00100000);
+
+ /* Enable on-DIMM termination */
+ set_on_dimm_termination_enable(ctrl);
+
+ dump_dcal_regs();
+
+ /* Receive enable calibration */
+ udelay(16);
+ for (cs = 0; cs < 1; cs++) {
+ print_debug("receive enable calibration CS");
+ print_debug_hex8(cs);
+ print_debug("\r\n");
+ write32(BAR+DCALCSR, (0x8000000c | ((cs+1)<<21)));
+ data32 = read32(BAR+DCALCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+DCALCSR);
+ }
+
+ dump_dcal_regs();
+
+ /* Adjust RCOMP */
+ data32 = read32(BAR+DDRIOMC2);
+ data32 &= ~(0xf << 16);
+ data32 |= (0xb << 16);
+ write32(BAR+DDRIOMC2, data32);
+
+ dump_dcal_regs();
+
+ data32 = drc & ~(3 << 20); /* clear ECC mode */
+ pci_write_config32(ctrl->f0, DRC, data32);
+ write32(BAR+DCALCSR, 0x0008000f);
+
+ /* Clear memory and init ECC */
+ for (cs = 0; cs < 2; cs++) {
+ if (!(mask & (1<<cs)))
+ continue;
+ print_debug("clear memory CS");
+ print_debug_hex8(cs);
+ print_debug("\r\n");
+ write32(BAR+MBCSR, 0xa00000f0 | ((cs+1)<<20) | (0<<16));
+ data32 = read32(BAR+MBCSR);
+ while (data32 & 0x80000000)
+ data32 = read32(BAR+MBCSR);
+ if (data32 & 0x40000000)
+ print_debug("failed!\r\n");
+ }
+
+ /* Clear read/write FIFO pointers */
+ print_debug("clear read/write fifo pointers\r\n");
+ write32(BAR+DDRIOMC2, read32(BAR+DDRIOMC2) | (1<<15));
+ udelay(16);
+ write32(BAR+DDRIOMC2, read32(BAR+DDRIOMC2) & ~(1<<15));
+ udelay(16);
+
+ dump_dcal_regs();
+
+ print_debug("Done\r\n");
+
+ /* Set initialization complete */
+ drc |= (1 << 29);
+ drc |= (3 << 30);
+ data32 = drc & ~(3 << 20); /* clear ECC mode */
+ pci_write_config32(ctrl->f0, DRC, data32);
+
+ /* Set the ECC mode */
+ pci_write_config32(ctrl->f0, DRC, drc);
+
+ /* The memory is now set up--use it */
+ cache_lbmem(MTRR_TYPE_WRBACK);
+}
+
+static inline int memory_initialized(void)
+{
+ return pci_read_config32(PCI_DEV(0, 0x00, 0), DRC) & (1 << 29);
+}
diff --git a/src/northbridge/intel/i3100/raminit_ep80579.h b/src/northbridge/intel/i3100/raminit_ep80579.h
new file mode 100644
index 0000000000..6c9080078c
--- /dev/null
+++ b/src/northbridge/intel/i3100/raminit_ep80579.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Arastra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef NORTHBRIDGE_INTEL_I3100_RAMINIT_EP80579_H
+#define NORTHBRIDGE_INTEL_I3100_RAMINIT_EP80579_H
+
+#define DIMM_SOCKETS 2
+struct mem_controller {
+ u32 node_id;
+ device_t f0;
+ u16 channel0[DIMM_SOCKETS];
+};
+
+#endif