summaryrefslogtreecommitdiff
path: root/src/northbridge/via/vt8601
diff options
context:
space:
mode:
authorarch import user (historical) <svn@openbios.org>2005-07-06 17:15:48 +0000
committerarch import user (historical) <svn@openbios.org>2005-07-06 17:15:48 +0000
commitacfaeceffd8b97715905f074a76e0d12f0d83889 (patch)
tree4a7c4b12a2dff67225cc39e0f47c4d0eac84979b /src/northbridge/via/vt8601
parent9c3f37cb5f741d7b2ba7852a16ffb82ee40968e9 (diff)
downloadcoreboot-acfaeceffd8b97715905f074a76e0d12f0d83889.tar.xz
Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-36
Creator: Li-Ta Lo <ollie@lanl.gov> emulator update Correction to the reduce emulator from Paulo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1952 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/via/vt8601')
-rw-r--r--src/northbridge/via/vt8601/northbridge.c4
-rw-r--r--src/northbridge/via/vt8601/raminit.c213
2 files changed, 107 insertions, 110 deletions
diff --git a/src/northbridge/via/vt8601/northbridge.c b/src/northbridge/via/vt8601/northbridge.c
index b578a975e4..cf8e82907c 100644
--- a/src/northbridge/via/vt8601/northbridge.c
+++ b/src/northbridge/via/vt8601/northbridge.c
@@ -29,8 +29,6 @@ static void northbridge_init(device_t dev)
pci_write_config8(dev, 0x76, 0x52);
}
-
-
static struct device_operations northbridge_operations = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
@@ -46,8 +44,6 @@ static struct pci_driver northbridge_driver __pci_driver = {
.device = 0x0601, /* 0x8601 is the AGP bridge? */
};
-
-
#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM)
static void pci_domain_read_resources(device_t dev)
diff --git a/src/northbridge/via/vt8601/raminit.c b/src/northbridge/via/vt8601/raminit.c
index 71ac010156..1aa58224f7 100644
--- a/src/northbridge/via/vt8601/raminit.c
+++ b/src/northbridge/via/vt8601/raminit.c
@@ -47,32 +47,30 @@ it with the version available from LANL.
#define DIMM_CL2 0
#endif
-void dimms_read(unsigned long x)
+void dimms_read(unsigned long x)
{
uint8_t c;
- unsigned long eax;
+ unsigned long eax;
volatile unsigned long y;
- eax = x;
- for(c = 0; c < 6; c++) {
- y = * (volatile unsigned long *) eax;
+ eax = x;
+ for (c = 0; c < 6; c++) {
+ y = *(volatile unsigned long *) eax;
eax += 0x10000000;
}
}
-void dimms_write(int x)
+void dimms_write(int x)
{
uint8_t c;
unsigned long eax = x;
- for(c = 0; c < 6; c++) {
+ for (c = 0; c < 6; c++) {
*(volatile unsigned long *) eax = 0;
eax += 0x10000000;
}
}
-
-
#ifdef DEBUG_SETNORTHB
-void setnorthb(device_t north, uint8_t reg, uint8_t val)
+void setnorthb(device_t north, uint8_t reg, uint8_t val)
{
print_debug("setnorth: reg ");
print_debug_hex8(reg);
@@ -85,108 +83,108 @@ void setnorthb(device_t north, uint8_t reg, uint8_t val)
#define setnorthb pci_write_config8
#endif
-void
-dumpnorth(device_t north)
+void dumpnorth(device_t north)
{
unsigned int r, c;
- for(r = 0; ; r += 16) {
+ for (r = 0;; r += 16) {
print_debug_hex8(r);
print_debug(":");
- for(c = 0; c < 16; c++) {
- print_debug_hex8(pci_read_config8(north, r+c));
+ for (c = 0; c < 16; c++) {
+ print_debug_hex8(pci_read_config8(north, r + c));
print_debug(" ");
}
print_debug("\r\n");
if (r >= 240)
break;
- }
+ }
}
-static void sdram_set_registers(const struct mem_controller *ctrl)
+static void sdram_set_registers(const struct mem_controller *ctrl)
{
- device_t north = (device_t) 0;
+ device_t north = (device_t) PCI_DEV(0, 0, 0);
uint8_t c, r;
print_err("vt8601 init starting\r\n");
- north = pci_locate_device(PCI_ID(0x1106, 0x8601), 0);
- north = 0;
print_debug_hex32(north);
print_debug(" is the north\n");
print_debug_hex16(pci_read_config16(north, 0));
print_debug(" ");
print_debug_hex16(pci_read_config16(north, 2));
print_debug("\r\n");
-
+
/* All we are doing now is setting initial known-good values that will
* be revised later as we read SPD
- */
+ */
+
// memory clk enable. We are not using ECC
- pci_write_config8(north,0x78, 0x01);
+ pci_write_config8(north, 0x78, 0x01);
print_debug_hex8(pci_read_config8(north, 0x78));
+
// dram control, see the book.
#if DIMM_PC133
- pci_write_config8(north,0x68, 0x52);
+ pci_write_config8(north, 0x68, 0x52);
#else
- pci_write_config8(north,0x68, 0x42);
+ pci_write_config8(north, 0x68, 0x42);
#endif
+
// dram control, see the book.
- pci_write_config8(north,0x6B, 0x0c);
+ pci_write_config8(north, 0x6B, 0x0c);
+
// Initial setting, 256MB in each bank, will be rewritten later.
- pci_write_config8(north,0x5A, 0x20);
+ pci_write_config8(north, 0x5A, 0x20);
print_debug_hex8(pci_read_config8(north, 0x5a));
- pci_write_config8(north,0x5B, 0x40);
- pci_write_config8(north,0x5C, 0x60);
- pci_write_config8(north,0x5D, 0x80);
- pci_write_config8(north,0x5E, 0xA0);
- pci_write_config8(north,0x5F, 0xC0);
+ pci_write_config8(north, 0x5B, 0x40);
+ pci_write_config8(north, 0x5C, 0x60);
+ pci_write_config8(north, 0x5D, 0x80);
+ pci_write_config8(north, 0x5E, 0xA0);
+ pci_write_config8(north, 0x5F, 0xC0);
// It seems we have to take care of these 2 registers as if
// they are bank 6 and 7.
- pci_write_config8(north,0x56, 0xC0);
- pci_write_config8(north,0x57, 0xC0);
-
+ pci_write_config8(north, 0x56, 0xC0);
+ pci_write_config8(north, 0x57, 0xC0);
+
// SDRAM in all banks
- pci_write_config8(north,0x60, 0x3F);
+ pci_write_config8(north, 0x60, 0x3F);
+
// DRAM timing. I'm suspicious of this
// This is for all banks, 64 is 0,1. 65 is 2,3. 66 is 4,5.
// ras precharge 4T, RAS pulse 5T
// cas2 is 0xd6, cas3 is 0xe6
// we're also backing off write pulse width to 2T, so result is 0xee
#if DIMM_CL2
- pci_write_config8(north,0x64, 0xd4);
- pci_write_config8(north,0x65, 0xd4);
- pci_write_config8(north,0x66, 0xd4);
-#else // CL=3
- pci_write_config8(north,0x64, 0xe4);
- pci_write_config8(north,0x65, 0xe4);
- pci_write_config8(north,0x66, 0xe4);
+ pci_write_config8(north, 0x64, 0xd4);
+ pci_write_config8(north, 0x65, 0xd4);
+ pci_write_config8(north, 0x66, 0xd4);
+#else // CL=3
+ pci_write_config8(north, 0x64, 0xe4);
+ pci_write_config8(north, 0x65, 0xe4);
+ pci_write_config8(north, 0x66, 0xe4);
#endif
// dram frequency select.
// enable 4K pages for 64M dram.
#if DIMM_PC133
- pci_write_config8(north,0x69, 0x3c);
+ pci_write_config8(north, 0x69, 0x3c);
#else
- pci_write_config8(north,0x69, 0xac);
+ pci_write_config8(north, 0x69, 0xac);
#endif
/* IMPORTANT -- disable refresh counter */
// refresh counter, disabled.
- pci_write_config8(north,0x6A, 0x00);
-
+ pci_write_config8(north, 0x6A, 0x00);
// clkenable configuration. kevinh FIXME - add precharge
- pci_write_config8(north,0x6C, 0x00);
+ pci_write_config8(north, 0x6C, 0x00);
// dram read latch delay of 1 ns, MD drive 8 mA,
- // high drive strength on MA[2: 13], we#, cas#, ras#
+ // high drive strength on MA[2: 13], we#, cas#, ras#
// As per Cindy Lee, set to 0x37, not 0x57
- pci_write_config8(north,0x6D, 0x7f);
+ pci_write_config8(north, 0x6D, 0x7f);
}
/* slot is the dram slot. Return size of side0 in lower 16-bit,
* side1 in upper 16-bit, in units of 8MB */
-static unsigned long
-spd_module_size(unsigned char slot)
-{
+static unsigned long spd_module_size(unsigned char slot)
+{
/* for all the DRAMS, see if they are there and get the size of each
* module. This is just a very early first cut at sizing.
*/
@@ -195,21 +193,24 @@ spd_module_size(unsigned char slot)
unsigned int value = 0;
/* unsigned int module = ((0x50 + slot) << 1) + 1; */
unsigned int module = 0x50 + slot;
+
/* is the module there? if byte 2 is not 4, then we'll assume it
* is useless.
*/
- print_info("Slot ");
- print_info_hex8(slot);
+ print_info("Slot ");
+ print_info_hex8(slot);
if (smbus_read_byte(module, 2) != 4) {
print_info(" is empty\r\n");
return 0;
}
print_info(" is SDRAM ");
-
+
banks = smbus_read_byte(module, 17);
+
/* we're going to assume symmetric banks. Sorry. */
- cols = smbus_read_byte(module, 4) & 0xf;
- rows = smbus_read_byte(module, 3) & 0xf;
+ cols = smbus_read_byte(module, 4) & 0xf;
+ rows = smbus_read_byte(module, 3) & 0xf;
+
/* grand total. You have rows+cols addressing, * times of banks, times
* width of data in bytes */
/* Width is assumed to be 64 bits == 8 bytes */
@@ -229,10 +230,8 @@ spd_module_size(unsigned char slot)
}
-static int
-spd_num_chips(unsigned char slot)
-{
-/* unsigned int module = ((0x50 + slot) << 1) + 1; */
+static int spd_num_chips(unsigned char slot)
+{
unsigned int module = 0x50 + slot;
unsigned int width;
@@ -249,20 +248,21 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
unsigned char timing = 0xe4;
/* read Trp */
val = smbus_read_byte(0x50, 27);
- if (val < 2*T133)
+ if (val < 2 * T133)
Trp = 1;
val = smbus_read_byte(0x50, 30);
- if (val < 5*T133)
+ if (val < 5 * T133)
Tras = 0;
val = smbus_read_byte(0x50, 18);
if (val < 8)
casl = 1;
if (val < 4)
casl = 0;
-
+
val = (Trp << 7) | (Tras << 6) | (casl << 4) | 4;
-
- print_debug_hex8(val); print_debug(" is the computed timing\n");
+
+ print_debug_hex8(val);
+ print_debug(" is the computed timing\n");
/* don't set it. Experience shows that this screwy chipset should just
* be run with the most conservative timing.
* pci_write_config8(0, 0x64, val);
@@ -271,23 +271,23 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
static void set_ma_mapping(device_t north, int slot, int type)
{
- unsigned char reg, val;
- int shift;
-
- reg = 0x58 + slot/2;
- if (slot%2 >= 1)
- shift = 0;
- else
- shift = 4;
-
- val = pci_read_config8(north, reg);
- val &= ~(0xf << shift);
- val |= type << shift;
- pci_write_config8(north, reg, val);
+ unsigned char reg, val;
+ int shift;
+
+ reg = 0x58 + slot / 2;
+ if (slot % 2 >= 1)
+ shift = 0;
+ else
+ shift = 4;
+
+ val = pci_read_config8(north, reg);
+ val &= ~(0xf << shift);
+ val |= type << shift;
+ pci_write_config8(north, reg, val);
}
-static void sdram_enable(int controllers, const struct mem_controller *ctrl)
+static void sdram_enable(int controllers, const struct mem_controller *ctrl)
{
unsigned char i;
static const uint8_t ramregs[] = {
@@ -295,29 +295,30 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
};
device_t north = 0;
uint32_t size, base, slot, ma;
- /* begin to initialize*/
+ /* begin to initialize */
+
// I forget why we need this, but we do
dimms_write(0xa55a5aa5);
-
- /* set NOP*/
- pci_write_config8(north,0x6C, 0x01);
+
+ /* set NOP */
+ pci_write_config8(north, 0x6C, 0x01);
print_debug("NOP\r\n");
- /* wait 200us*/
+ /* wait 200us */
// You need to do the memory reference. That causes the nop cycle.
dimms_read(0);
udelay(400);
print_debug("PRECHARGE\r\n");
/* set precharge */
- pci_write_config8(north,0x6C, 0x02);
+ pci_write_config8(north, 0x6C, 0x02);
print_debug("DUMMY READS\r\n");
- /* dummy reads*/
+ /* dummy reads */
dimms_read(0);
udelay(200);
print_debug("CBR\r\n");
- /* set CBR*/
- pci_write_config8(north,0x6C, 0x04);
-
- /* do 8 reads and wait >100us between each - from via*/
+ /* set CBR */
+ pci_write_config8(north, 0x6C, 0x04);
+
+ /* do 8 reads and wait >100us between each - from via */
dimms_read(0);
udelay(200);
dimms_read(0);
@@ -335,43 +336,43 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
dimms_read(0);
udelay(200);
print_debug("MRS\r\n");
- /* set MRS*/
- pci_write_config8(north,0x6c, 0x03);
+ /* set MRS */
+ pci_write_config8(north, 0x6c, 0x03);
#if DIMM_CL2
dimms_read(0x150);
-#else // CL=3
+#else // CL=3
dimms_read(0x1d0);
#endif
udelay(200);
print_debug("NORMAL\r\n");
/* set to normal mode */
- pci_write_config8(north,0x6C, 0x08);
-
+ pci_write_config8(north, 0x6C, 0x08);
+
dimms_write(0x55aa55aa);
dimms_read(0);
udelay(200);
print_debug("set ref. rate\r\n");
// Set the refresh rate.
#if DIMM_PC133
- pci_write_config8(north,0x6A, 0x86);
+ pci_write_config8(north, 0x6A, 0x86);
#else
- pci_write_config8(north,0x6A, 0x65);
+ pci_write_config8(north, 0x6A, 0x65);
#endif
print_debug("enable multi-page open\r\n");
// enable multi-page open
- pci_write_config8(north,0x6B, 0x0d);
-
+ pci_write_config8(north, 0x6B, 0x0d);
+
base = 0;
- for(slot = 0; slot < 4; slot++) {
+ for (slot = 0; slot < 4; slot++) {
size = spd_module_size(slot);
/* side 0 */
base += size & 0xffff;
- pci_write_config8(north, ramregs[2*slot], base);
+ pci_write_config8(north, ramregs[2 * slot], base);
/* side 1 */
base += size >> 16;
if (base > 0xff)
base = 0xff;
- pci_write_config8(north, ramregs[2*slot + 1], base);
+ pci_write_config8(north, ramregs[2 * slot + 1], base);
if (!size)
continue;
@@ -379,13 +380,13 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
/* Calculate the value of MA mapping type register,
* based on size of SDRAM chips. */
size = (size & 0xffff) << (3 + 3);
- /* convert module size to be in Mbits */
+ /* convert module size to be in Mbits */
size /= spd_num_chips(slot);
print_debug_hex16(size);
print_debug(" is the chip size\r\n");
if (size < 64)
ma = 0;
- if (size < 256)
+ else if (size < 256)
ma = 8;
else
ma = 0xe;