diff options
author | Alexandru Gagniuc <mr.nuke.me@gmail.com> | 2013-06-08 11:49:10 -0500 |
---|---|---|
committer | Ronald G. Minnich <rminnich@gmail.com> | 2013-06-10 22:56:06 +0200 |
commit | 7d31e7c13897e4b2548136c7a6f701b9121b7ad3 (patch) | |
tree | b5e398f40fafdc21c4a93b4276676d31691a49a3 /src/northbridge/via | |
parent | 5239ba2f8fd07806053ff864302ba905fc5f015d (diff) | |
download | coreboot-7d31e7c13897e4b2548136c7a6f701b9121b7ad3.tar.xz |
VX900: Add DDR3 initialization
The VX900 can be connected to either DDR2 or DDR3. On my board, it is
DDR3, hence why there is no and will be no DDR2 code from my side.
This is the raminit for DDR3 dimms for the VX900. I like the term
"raminit" better than "memory training". This is a device, not a dog.
What works and what doesn't is documented in the code. It does not
make sense to hide that information in a commit message.
Change-Id: Ib2ebc10e6d4d22d0a937fe9e895c17ce79153c88
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/3417
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Diffstat (limited to 'src/northbridge/via')
-rw-r--r-- | src/northbridge/via/vx900/Makefile.inc | 2 | ||||
-rw-r--r-- | src/northbridge/via/vx900/raminit.h | 100 | ||||
-rw-r--r-- | src/northbridge/via/vx900/raminit_ddr3.c | 1682 | ||||
-rw-r--r-- | src/northbridge/via/vx900/vx900.h | 4 |
4 files changed, 1785 insertions, 3 deletions
diff --git a/src/northbridge/via/vx900/Makefile.inc b/src/northbridge/via/vx900/Makefile.inc index 3e0d9c7692..1586c87751 100644 --- a/src/northbridge/via/vx900/Makefile.inc +++ b/src/northbridge/via/vx900/Makefile.inc @@ -21,7 +21,7 @@ romstage-y += pci_util.c romstage-y += early_smbus.c romstage-y += early_vx900.c romstage-y += early_host_bus_ctl.c -#romstage-y += raminit_ddr3.c +romstage-y += raminit_ddr3.c romstage-y += ./../../../device/dram/ddr3.c romstage-y += ./../../../southbridge/via/common/early_smbus_delay.c romstage-y += ./../../../southbridge/via/common/early_smbus_is_busy.c diff --git a/src/northbridge/via/vx900/raminit.h b/src/northbridge/via/vx900/raminit.h new file mode 100644 index 0000000000..c599c0fee8 --- /dev/null +++ b/src/northbridge/via/vx900/raminit.h @@ -0,0 +1,100 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Alexandru Gagniuc <mr.nuke.me@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef RAMINIT_VX900_H +#define RAMINIT_VX900_H + +#include <device/dram/ddr3.h> +#include "vx900.h" + +#define SPD_END_LIST 0xff + +typedef struct dimm_layout_st +{ + /* The address of the DIMM on the SMBUS * + * 0xFF to terminate the array*/ + u8 spd_addr[VX900_MAX_DIMM_SLOTS + 1]; +} dimm_layout; + +typedef struct dimm_info_st +{ + dimm_attr dimm[VX900_MAX_DIMM_SLOTS]; +} dimm_info; + +typedef struct mem_rank_st { + u16 start_addr; + u16 end_addr; +} mem_rank; + +typedef struct rank_layout_st { + u32 phys_rank_size_mb[VX900_MAX_MEM_RANKS]; + mem_rank virt[VX900_MAX_MEM_RANKS]; + dimm_flags_t flags[VX900_MAX_MEM_RANKS]; +} rank_layout; + +typedef struct pci_reg8_st { + u8 addr; + u8 val; +} pci_reg8; + +typedef u8 timing_dly[8]; + +typedef struct delay_range_st { + timing_dly low; + timing_dly avg; + timing_dly high; +} delay_range; + +typedef struct vx900_delay_calib_st { + delay_range rx_dq_cr; + delay_range rx_dqs; + /* Transmit delays are calibrated for each dimm */ + delay_range tx_dq[VX900_MAX_DIMM_SLOTS]; + delay_range tx_dqs[VX900_MAX_DIMM_SLOTS]; +} vx900_delay_calib; + +typedef struct ramctr_timing_st { + enum spd_memory_type dram_type; + u16 cas_supported; + /* tLatencies are in units of ns, scaled by x256 */ + u32 tCK; + u32 tAA; + u32 tWR; + u32 tRCD; + u32 tRRD; + u32 tRP; + u32 tRAS; + u32 tRC; + u32 tRFC; + u32 tWTR; + u32 tRTP; + u32 tFAW; + /* Latencies in terms of clock cycles + * They are saved separately as they are needed for DRAM MRS commands*/ + u8 CAS; /* CAS read latency */ + u8 CWL; /* CAS write latency */ + u8 WR; /* write recovery time */ + /* Number of dimms currently connected */ + u8 n_dimms; + +} ramctr_timing; + +void vx900_init_dram_ddr3(const dimm_layout *dimms); + +#endif /* RAMINIT_VX900_H */ diff --git a/src/northbridge/via/vx900/raminit_ddr3.c b/src/northbridge/via/vx900/raminit_ddr3.c new file mode 100644 index 0000000000..05c3edc67c --- /dev/null +++ b/src/northbridge/via/vx900/raminit_ddr3.c @@ -0,0 +1,1682 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 Alexandru Gagniuc <mr.nuke.me@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "early_vx900.h" +#include "raminit.h" +#include <arch/io.h> +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <delay.h> +#include <lib.h> +#include <string.h> + +/** + * @file raminit_ddr3.c + * + * \brief DDR3 initialization for VIA VX900 chipset + * + * Rather than explain the DDR3 init algorithm, it is better to focus on what + * works and what doesn't. Familiarity with the DDR3 spec does not hurt. + * + * 1 DIMMs and 2 DIMMs with one rank each works. + * 1 rank DIMM with 2 rank DIMM works, but the odd ranks are disabled. + * (2) 2-rank DIMMs will not work. + * + * It is not yet clear if odd ranks do not work because of faulty timing + * calibration, or a misconfiguration of the MCU. I have seen this with DIMMS + * which mirror pins on the odd rank. That could also be the issue. + * + * The capture window is not calibrated, but preset. Whether that preset is + * universal or frequency dependent, and whether it is board-specific or not is + * not yet clear. @see vx900_dram_calibrate_recieve_delays(). + * + * 4GBit and 8GBit modules may not work. This is untested. Modules with 11 + * column address bits are not tested. @see vx900_dram_map_row_col_bank() + * + * Everything else should be in a more or less usable state. FIXME s are placed + * all over as a reminder that either something really needs fixing, or as a + * reminder to double-check. + */ + +/* Map BA0 <-> A17, BA1 <-> A18 */ +/* Map BA2 <-> A19, RA0/RA1 must not overlap BA[0:2] */ +#define VX900_MRS_MA_MAP 0x4b33 /* MA Pin Mapping for MRS commands */ +#define VX900_CALIB_MA_MAP 0x5911 /* MA Pin mapping for calibrations */ + +/* + * Registers 0x78 -> 0x7f contain the calibration settings for DRAM IO timing + * The dataset in these registers is selected from 0x70. + * Once the correct dataset is selected the delays can be altered. + * delay_type refers to TxDQS, TxDQ, RxDQS, or RxCR + * bound refers to either manual, average, upper bound, or lower bound + */ +#define CALIB_TxDQS 0 +#define CALIB_TxDQ 1 +#define CALIB_RxDQS 2 +#define CALIB_RxDQ_CR 3 + +#define CALIB_AVERAGE 0 +#define CALIB_LOWER 1 +#define CALIB_UPPER 2 +#define CALIB_MANUAL 4 /* We want this & 3 to overflow to 0 */ + +static void vx900_delay_calib_mode_select(u8 delay_type, u8 bound) +{ + /* Which calibration setting */ + u8 reg8 = (delay_type & 0x03) << 2; + /* Upper, lower, average, or manual setting */ + reg8 |= (bound & 0x03); + pci_write_config8(MCU, 0x70, reg8); +} + +/* + * The vendor BIOS does something similar to vx900_delay_calib_mode_select(), + * then reads or write a byte, and repeats the process for all 8 bytes. This is + * annoyingly inefficient, and we can achieve the same result in a much more + * elegant manner. + */ +static void vx900_read_0x78_0x7f(timing_dly dly) +{ + *((u32 *) (&(dly[0]))) = pci_read_config32(MCU, 0x78); + *((u32 *) (&(dly[4]))) = pci_read_config32(MCU, 0x7c); +} + +static void vx900_write_0x78_0x7f(const timing_dly dly) +{ + pci_write_config32(MCU, 0x78, *((u32 *) (&(dly[0])))); + pci_write_config32(MCU, 0x7c, *((u32 *) (&(dly[4])))); +} + +static void vx900_read_delay_range(delay_range * d_range, u8 mode) +{ + vx900_delay_calib_mode_select(mode, CALIB_LOWER); + vx900_read_0x78_0x7f(d_range->low); + vx900_delay_calib_mode_select(mode, CALIB_AVERAGE); + vx900_read_0x78_0x7f(d_range->avg); + vx900_delay_calib_mode_select(mode, CALIB_UPPER); + vx900_read_0x78_0x7f(d_range->high); +} + +static void dump_delay(const timing_dly dly) +{ + u8 i; + for (i = 0; i < 8; i++) { + printram(" %.2x", dly[i]); + } + printram("\n"); +} + +static void dump_delay_range(const delay_range d_range) +{ + printram("Lower limit: "); + dump_delay(d_range.low); + printram("Average: "); + dump_delay(d_range.avg); + printram("Upper limit: "); + dump_delay(d_range.high); +} + +/* + * These are some "safe" values that can be used for memory initialization. + * Some will stay untouched, and others will be overwritten later on + */ +static pci_reg8 mcu_init_config[] = { + {0x40, 0x01}, /* Virtual rank 0 ending address = 64M - 1 */ + {0x41, 0x00}, {0x42, 0x00}, {0x43, 0x00}, /* Virtual Ranks ending */ + {0x48, 0x00}, /* Virtual rank 0 starting address = 0 */ + {0x49, 0x00}, {0x4a, 0x00}, {0x4b, 0x00}, /* Virtual Ranks beginning */ + {0x50, 0xd8}, /* Set ranks 0-3 to 11 col bits, 16 row bits */ + /* Disable all virtual ranks */ + {0x54, 0x00}, {0x55, 0x00}, {0x56, 0x00}, {0x57, 0x00}, + /* Disable rank interleaving in ranks 0-3 */ + {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x00}, {0x5b, 0x00}, + {0x6c, 0xA0}, /* Memory type: DDR3, VDIMM: 1.5V, 64-bit DRAM */ + {0xc4, 0x80}, /* Enable 8 memory banks */ + {0xc6, 0x80}, /* Minimum latency from self-refresh. Bit [7] must be 1 */ + /* FIXME: do it here or in Final config? */ + {0xc8, 0x80}, /* Enable automatic triggering of short ZQ calibration */ + {0x99, 0xf0}, /* Power Management and Bypass Reorder Queue */ + /* Enable differential DQS; MODT assertion values suggested in DS */ + {0x9e, 0xa1}, {0x9f, 0x51}, + /* DQ/DQM Duty Control - Do not put any extra delays */ + {0xe9, 0x00}, {0xea, 0x00}, {0xeb, 0x00}, {0xec, 0x00}, + {0xed, 0x00}, {0xee, 0x00}, {0xef, 0x00}, + {0xfc, 0x00}, {0xfd, 0x00}, {0xfe, 0x00}, {0xff, 0x00}, + /* The following parameters we may or may not change */ + {0x61, 0x2e}, /* DRAMC Pipeline Control */ + {0x77, 0x10}, /* MDQS Output Control */ + + /* The following are parameters we'll most likely never change again */ + {0x60, 0xf4}, /* DRAM Pipeline Turn-Around Setting */ + {0x65, 0x49}, /* DRAM Arbitration Bandwidth Timer - I */ + {0x66, 0x80}, /* DRAM Queue / Arbitration */ + {0x69, 0xc6}, /* Bank Control: 8 banks, high priority refresh */ + {0x6a, 0xfc}, /* DRAMC Request Reorder Control */ + {0x6e, 0x38}, /* Burst lenght: 8, burst-chop: enable */ + {0x73, 0x04}, /* Close All Pages Threshold */ + + /* The following need to be dynamically asserted */ + /* See: check_special_registers.c */ + {0x74, 0xa0}, /* Yes, same 0x74; add one more T */ + {0x76, 0x60}, /* Write Data Phase Control */ + +}; + +/* + * This table keeps the driving strength control setting that we can safely use + * during initialization. This settings come in part from SerialICE, and in part + * from code provided by VIA. + */ +static pci_reg8 mcu_drv_ctrl_config[] = { + {0xd3, 0x03}, /* Enable auto-compensation circuit for ODT strength */ + {0xd4, 0x80}, /* Set internal ODT to dynamically turn on or off */ + {0xd6, 0x20}, /* Enable strong driving for MA and DRAM commands */ + {0xd0, 0x88}, /* (ODT) Strength ?has effect? */ + {0xe0, 0x88}, /* DRAM Driving – Group DQS (MDQS) */ + {0xe1, 0x00}, /* Disable offset mode for driving strength control */ + {0xe2, 0x88}, /* DRAM Driving – Group DQ (MD, MDQM) */ + {0xe4, 0xcc}, /* DRAM Driving – Group CSA (MCS, MCKE, MODT) */ + {0xe8, 0x88}, /* DRAM Driving – Group MA (MA, MBA, MSRAS, MSCAS, MSWE) */ + {0xe6, 0xff}, /* DRAM Driving – Group DCLK0 (DCLK[2:0] for DIMM0) */ + {0xe7, 0xff}, /* DRAM Driving – Group DCLK1 (DCLK[5:3] for DIMM1) */ + {0xe4, 0xcc}, /* DRAM Driving – Group CSA (MCS, MCKE, MODT) */ + {0x91, 0x08}, /* MCLKO Output Phase Delay - I */ + {0x92, 0x08}, /* MCLKO Output Phase Delay - II */ + {0x93, 0x16}, /* CS/CKE Output Phase Delay */ + {0x95, 0x16}, /* SCMD/MA Output Phase Delay */ + {0x9b, 0x3f}, /* Memory Clock Output Enable */ +}; + +static void vx900_dram_set_ma_pin_map(u16 map) +{ + pci_write_config16(MCU, 0x52, map); +} + +/* + * FIXME: This function is a complete waste of space. All we really need is a + * MA MAP table based on either row address bits or column address bits. + * The problem is, I do not know if this mapping is applied during the column + * access or during the row access. At least the religiously verbose output + * makes pretty console output. + */ +static void vx900_dram_map_pins(u8 ba0, u8 ba1, u8 ba2, u8 ra0, u8 ra1) +{ + u16 map = 0; + + printram("Mapping address pins to DRAM pins:\n"); + printram(" BA0 -> A%u\n", ba0); + printram(" BA1 -> A%u\n", ba1); + printram(" BA2 -> A%u\n", ba2); + printram(" RA0 -> A%u\n", ra0); + printram(" RA1 -> A%u\n", ra1); + /* Make sure BA2 is enabled */ + map |= (1 << 11); + + /* + * Find RA1 (15:14) + * 00: A14 + * 01: A16 + * 10: A18 + * 11: A20 + */ + if ((ra1 & 0x01) || (ra1 < 14) || (ra1 > 20)) { + printram("Illegal mapping RA1 -> A%u\n", ra1); + return; + } + map |= (((ra1 - 14) >> 1) & 0x03) << 14; + + /* + * Find RA0 (13:12) + * 00: A15 + * 01: A17 + * 10: A19 + * 11: A21 + */ + if ((!(ra0 & 0x01)) || (ra0 < 15) || (ra0 > 21)) { + printram("Illegal mapping RA0 -> A%u\n", ra0); + return; + } + map |= (((ra0 - 15) >> 1) & 0x03) << 12; + + /* + * Find BA2 (10:8) + * x00: A14 + * x01: A15 + * x10: A18 + * x11: A19 + */ + switch (ba2) { + case 14: + map |= (0 << 8); + break; + case 15: + map |= (1 << 8); + break; + case 18: + map |= (2 << 8); + break; + case 19: + map |= (3 << 8); + break; + default: + printram("Illegal mapping BA2 -> A%u\n", ba2); + break; + } + + /* + * Find BA1 (6:4) + * 000: A12 + * 001: A14 + * 010: A16 + * 011: A18 + * 1xx: A20 + */ + if (((ba1 & 0x01)) || (ba1 < 12) || (ba1 > 20)) { + printram("Illegal mapping BA1 -> A%u\n", ba1); + return; + } + map |= (((ba1 - 12) >> 1) & 0x07) << 4; + + /* + * Find BA0 (2:0) + * 000: A11 + * 001: A13 + * 010: A15 + * 011: A17 + * 1xx: A19 + */ + if ((!(ba0 & 0x01)) || (ba0 < 11) || (ba0 > 19)) { + printram("Illegal mapping BA0 -> A%u\n", ba0); + return; + } + map |= (((ba0 - 11) >> 1) & 0x07) << 0; + + printram("Setting map mask (rx52) to %.4x\n", map); + vx900_dram_set_ma_pin_map(map); +} + +static void vx900_dram_write_init_config(void) +{ + /* Keep our RAM space free of legacy stuff */ + vx900_disable_legacy_rom_shadow(); + + /* Now worry about the real RAM init */ + size_t i; + for (i = 0; i < (sizeof(mcu_init_config) / sizeof(pci_reg8)); i++) { + pci_write_config8(MCU, mcu_init_config[i].addr, + mcu_init_config[i].val); + } + vx900_dram_set_ma_pin_map(VX900_CALIB_MA_MAP); + + /* FIXME: Slowing stuff down. Does this really help? */ + + /* Fast cycle control for CPU-to-DRAM Read Cycle 0:Disabled. + * This CPU bus controller will wait for all data */ + ////pci_mod_config8(HOST_BUS, 0x51, (1 << 7), 0); + /* Memory to CPU bus Controller Conversion Mode 1: Synchronous mode */ + ////pci_mod_config8(HOST_BUS, 0x54, 0, (1 << 1)); +} + +static void dram_find_spds_ddr3(const dimm_layout * addr, dimm_info * dimm) +{ + size_t i = 0; + int dimms = 0; + do { + spd_raw_data spd; + spd_read(addr->spd_addr[i], spd); + spd_decode_ddr3(&dimm->dimm[i], spd); + if (dimm->dimm[i].dram_type != SPD_MEMORY_TYPE_SDRAM_DDR3) + continue; + dimms++; + dram_print_spd_ddr3(&dimm->dimm[i]); + } while (addr->spd_addr[++i] != SPD_END_LIST + && i < VX900_MAX_DIMM_SLOTS); + + if (!dimms) + die("No DIMMs were found"); +} + +static void dram_find_common_params(const dimm_info * dimms, + ramctr_timing * ctrl) +{ + size_t i, valid_dimms; + memset(ctrl, 0, sizeof(ramctr_timing)); + ctrl->cas_supported = 0xff; + valid_dimms = 0; + for (i = 0; i < VX900_MAX_DIMM_SLOTS; i++) { + const dimm_attr *dimm = &dimms->dimm[i]; + if (dimm->dram_type == SPD_MEMORY_TYPE_UNDEFINED) + continue; + valid_dimms++; + + if (valid_dimms == 1) { + /* First DIMM defines the type of DIMM */ + ctrl->dram_type = dimm->dram_type; + } else { + /* Check if we have mismatched DIMMs */ + if (ctrl->dram_type != dimm->dram_type) + die("Mismatched DIMM Types"); + } + /* Find all possible CAS combinations */ + ctrl->cas_supported &= dimm->cas_supported; + + /* Find the smallest common latencies supported by all DIMMs */ + ctrl->tCK = max(ctrl->tCK, dimm->tCK); + ctrl->tAA = max(ctrl->tAA, dimm->tAA); + ctrl->tWR = max(ctrl->tWR, dimm->tWR); + ctrl->tRCD = max(ctrl->tRCD, dimm->tRCD); + ctrl->tRRD = max(ctrl->tRRD, dimm->tRRD); + ctrl->tRP = max(ctrl->tRP, dimm->tRP); + ctrl->tRAS = max(ctrl->tRAS, dimm->tRAS); + ctrl->tRC = max(ctrl->tRC, dimm->tRC); + ctrl->tRFC = max(ctrl->tRFC, dimm->tRFC); + ctrl->tWTR = max(ctrl->tWTR, dimm->tWTR); + ctrl->tRTP = max(ctrl->tRTP, dimm->tRTP); + ctrl->tFAW = max(ctrl->tFAW, dimm->tFAW); + + } + + ctrl->n_dimms = valid_dimms; + if (!ctrl->cas_supported) + die("Unsupported DIMM combination. " + "DIMMS do not support common CAS latency"); + if (!valid_dimms) + die("No valid DIMMs found"); +} + +static void vx900_dram_phys_bank_range(const dimm_info * dimms, + rank_layout * ranks) +{ + size_t i; + for (i = 0; i < VX900_MAX_DIMM_SLOTS; i++) { + if (dimms->dimm[i].dram_type == SPD_MEMORY_TYPE_UNDEFINED) + continue; + u8 nranks = dimms->dimm[i].ranks; + /* Make sure we save the flags */ + ranks->flags[i * 2 + 1] = ranks->flags[i * 2] = + dimms->dimm[i].flags; + /* Only Rank1 has a mirrored pin mapping */ + ranks->flags[i * 2].pins_mirrored = 0; + if (nranks > 2) + die("Found DIMM with more than two ranks, which is not " + "supported by this chipset"); + u32 size = dimms->dimm[i].size_mb; + if (nranks == 2) { + /* Each rank holds half the capacity of the DIMM */ + size >>= 1; + ranks->phys_rank_size_mb[i << 1] = size; + ranks->phys_rank_size_mb[(i << 1) | 1] = size; + } else { + /* Otherwise, everything is held in the first bank */ + ranks->phys_rank_size_mb[i << 1] = size; + ranks->phys_rank_size_mb[(i << 1) | 1] = 0;; + } + } +} + +#define ODT_R0 0 +#define ODT_R1 1 +#define ODT_R2 2 +#define ODT_R3 3 +/* + * This is the table that tells us which MODT pin to map to which rank. + * + * This table is taken from code provided by VIA, but no explanation was + * provided as to why it is done this way. It may be possible that this table is + * not suitable for the way we map ranks later on. + */ +static const u8 odt_lookup_table[][2] = { + /* RankMAP Rank 3 Rank 2 Rank 1 Rank 0 */ + {0x01, (ODT_R3 << 6) | (ODT_R2 << 4) | (ODT_R1 << 2) | (ODT_R0 << 0)}, + {0x03, (ODT_R3 << 6) | (ODT_R2 << 4) | (ODT_R0 << 2) | (ODT_R1 << 0)}, + {0x04, (ODT_R3 << 6) | (ODT_R2 << 4) | (ODT_R1 << 2) | (ODT_R0 << 0)}, + {0x05, (ODT_R3 << 6) | (ODT_R0 << 4) | (ODT_R1 << 2) | (ODT_R2 << 0)}, + {0x07, (ODT_R3 << 6) | (ODT_R0 << 4) | (ODT_R2 << 2) | (ODT_R2 << 0)}, + {0x0c, (ODT_R2 << 6) | (ODT_R3 << 4) | (ODT_R1 << 2) | (ODT_R0 << 0)}, + {0x0d, (ODT_R0 << 6) | (ODT_R0 << 4) | (ODT_R1 << 2) | (ODT_R2 << 0)}, + {0x0f, (ODT_R0 << 6) | (ODT_R0 << 4) | (ODT_R2 << 2) | (ODT_R2 << 0)}, + {0, 0}, +}; + +static void vx900_dram_driving_ctrl(const dimm_info * dimm) +{ + size_t i, ndimms; + u8 reg8, regxd5, rank_mask; + + rank_mask = 0; + /* For ODT range selection, datasheet recommends + * when 1 DIMM present: 60 Ohm + * when 2 DIMMs present: 120 Ohm */ + ndimms = 0; + for (i = 0; i < VX900_MAX_DIMM_SLOTS; i++) { + if (dimm->dimm[i].dram_type != SPD_MEMORY_TYPE_SDRAM_DDR3) + continue; + ndimms++; + rank_mask |= (1 << (i * 2)); + if (dimm->dimm[i].ranks > 1) + rank_mask |= (2 << (i * 2)); + } + /* ODT strength and MD/MDQM/MDQS driving strength */ + if (ndimms > 1) { + /* Enable 1 ODT block (120 Ohm ODT) */ + regxd5 = 0 << 2; + /* Enable strong driving for MD/MDQM/MDQS */ + regxd5 |= (1 << 7); + } else { + /* Enable 2 ODT blocks (60 Ohm ODT) */ + regxd5 = 1 << 2; + /* Leave MD/MDQM/MDQS driving weak */ + } + pci_write_config8(MCU, 0xd5, regxd5); + + /* Enable strong CLK driving for DIMMs with more than one rank */ + if (dimm->dimm[0].ranks > 1) + pci_mod_config8(MCU, 0xd6, 0, (1 << 7)); + if (dimm->dimm[1].ranks > 1) + pci_mod_config8(MCU, 0xd6, 0, (1 << 6)); + + /* DRAM ODT Lookup Table */ + for (i = 0;; i++) { + if (odt_lookup_table[i][0] == 0) { + printram("No ODT entry for rank mask %x\n", rank_mask); + die("Aborting"); + } + if (odt_lookup_table[i][0] != rank_mask) + continue; + + reg8 = odt_lookup_table[i][1]; + break; + } + + printram("Mapping rank mask %x to ODT entry %.2x\n", rank_mask, reg8); + pci_write_config8(MCU, 0x9c, reg8); + + for (i = 0; i < (sizeof(mcu_drv_ctrl_config) / sizeof(pci_reg8)); i++) { + pci_write_config8(MCU, mcu_drv_ctrl_config[i].addr, + mcu_drv_ctrl_config[i].val); + } +} + +static void vx900_pr_map_all_vr3(void) +{ + /* Enable all ranks and set them to VR3 */ + pci_write_config16(MCU, 0x54, 0xbbbb); +} + +/* Map physical rank pr to virtual rank vr */ +static void vx900_map_pr_vr(u8 pr, u8 vr) +{ + u16 val; + + pr &= 0x3; + vr &= 0x3; + /* Enable rank (bit [3], and set the VR number bits [1:0] */ + val = 0x8 | vr; + /* Now move the value to the appropriate PR */ + val <<= (pr * 4); + pci_mod_config16(MCU, 0x54, 0xf << (pr * 4), val); + printram("Mapping PR %u to VR %u\n", pr, vr); +} + +static u8 vx900_get_CWL(u8 CAS) +{ + /* Get CWL based on CAS using the following rule: + * _________________________________________ + * CAS: | 4T | 5T | 6T | 7T | 8T | 9T | 10T | 11T | + * CWL: | 5T | 5T | 5T | 6T | 6T | 7T | 7T | 8T | + */ + static const u8 cas_cwl_map[] = { 5, 5, 5, 6, 6, 7, 7, 8 }; + if (CAS > 11) + return 8; + return cas_cwl_map[CAS - 4]; +} + +/* + * Here we are calculating latencies, and writing them to the appropriate + * registers. Note that some registers do not take latencies from 0 = 0T, + * 1 = 1T, so each register gets its own math formula. + */ +static void vx900_dram_timing(ramctr_timing * ctrl) +{ + u8 reg8, val, tFAW, tRRD; + u32 val32; + + /* Maximum supported DDR3 frequency is 533MHz (DDR3 1066) so make sure + * we cap it if we have faster DIMMs. + * Then, align it to the closest JEDEC standard frequency */ + if (ctrl->tCK <= TCK_533MHZ) { + ctrl->tCK = TCK_533MHZ; + } else if (ctrl->tCK <= TCK_400MHZ) { + ctrl->tCK = TCK_400MHZ; + } else if (ctrl->tCK <= TCK_333MHZ) { + ctrl->tCK = TCK_333MHZ; + } else { + ctrl->tCK = TCK_266MHZ; + } + + val32 = (1000 << 8) / ctrl->tCK; + printram("Selected DRAM frequency: %u MHz\n", val32); + + /* Find CAS and CWL latencies */ + val = (ctrl->tAA + ctrl->tCK - 1) / ctrl->tCK; + printram("Minimum CAS latency : %uT\n", val); + /* Find lowest supported CAS latency that satisfies the minimum value */ + while (!((ctrl->cas_supported >> (val - 4)) & 1) + && (ctrl->cas_supported >> (val - 4))) { + val++; + } + /* Is CAS supported */ + if (!(ctrl->cas_supported & (1 << (val - 4)))) + printram("CAS not supported\n"); + printram("Selected CAS latency : %uT\n", val); + ctrl->CAS = val; + ctrl->CWL = vx900_get_CWL(ctrl->CAS); + printram("Selected CWL latency : %uT\n", ctrl->CWL); + /* Write CAS and CWL */ + reg8 = (((ctrl->CWL - 4) & 0x07) << 4) | ((ctrl->CAS - 4) & 0x07); + pci_write_config8(MCU, 0xc0, reg8); + + /* Find tRCD */ + val = (ctrl->tRCD + ctrl->tCK - 1) / ctrl->tCK; + printram("Selected tRCD : %uT\n", val); + reg8 = ((val - 4) & 0x7) << 4; + /* Find tRP */ + val = (ctrl->tRP + ctrl->tCK - 1) / ctrl->tCK; + printram("Selected tRP : %uT\n", val); + reg8 |= ((val - 4) & 0x7); + pci_write_config8(MCU, 0xc1, reg8); + + /* Find tRAS */ + val = (ctrl->tRAS + ctrl->tCK - 1) / ctrl->tCK; + printram("Selected tRAS : %uT\n", val); + reg8 = ((val - 15) & 0x7) << 4; + /* Find tWR */ + ctrl->WR = (ctrl->tWR + ctrl->tCK - 1) / ctrl->tCK; + printram("Selected tWR : %uT\n", ctrl->WR); + reg8 |= ((ctrl->WR - 4) & 0x7); + pci_write_config8(MCU, 0xc2, reg8); + + /* Find tFAW */ + tFAW = (ctrl->tFAW + ctrl->tCK - 1) / ctrl->tCK; + printram("Selected tFAW : %uT\n", tFAW); + /* Find tRRD */ + tRRD = (ctrl->tRRD + ctrl->tCK - 1) / ctrl->tCK; + printram("Selected tRRD : %uT\n", tRRD); + val = tFAW - 4 * tRRD; /* number of cycles above 4*tRRD */ + reg8 = ((val - 0) & 0x7) << 4; + reg8 |= ((tRRD - 2) & 0x7); + pci_write_config8(MCU, 0xc3, reg8); + + /* Find tRTP */ + val = (ctrl->tRTP + ctrl->tCK - 1) / ctrl->tCK; + printram("Selected tRTP : %uT\n", val); + reg8 = ((val & 0x3) << 4); + /* Find tWTR */ + val = (ctrl->tWTR + ctrl->tCK - 1) / ctrl->tCK; + printram("Selected tWTR : %uT\n", val); + reg8 |= ((val - 2) & 0x7); + pci_mod_config8(MCU, 0xc4, 0x3f, reg8); + + /* DRAM Timing for All Ranks - VI + * [7:6] CKE Assertion Minimum Pulse Width + * We probably don't want to mess with this just yet. + * [5:0] Refresh-to-Active or Refresh-to-Refresh (tRFC) + * tRFC = (30 + 2 * [5:0])T + * Since we previously set RxC4[7] + */ + reg8 = pci_read_config8(MCU, 0xc5); + val = (ctrl->tRFC + ctrl->tCK - 1) / ctrl->tCK; + printram("Minimum tRFC : %uT\n", val); + if (val < 30) { + val = 0; + } else { + val = (val - 30 + 1) / 2; + } + ; + printram("Selected tRFC : %uT\n", 30 + 2 * val); + reg8 |= (val & 0x3f); + pci_write_config8(MCU, 0xc5, reg8); + + /* Where does this go??? */ + val = (ctrl->tRC + ctrl->tCK - 1) / ctrl->tCK; + printram("Required tRC : %uT\n", val); +} + +/* Program the DRAM frequency */ +static void vx900_dram_freq(ramctr_timing * ctrl) +{ + u8 val; + + /* Step 1 - Reset the PLL */ + pci_mod_config8(MCU, 0x90, 0x00, 0x0f); + /* Wait at least 10 ns; VIA code delays by 640us */ + udelay(640); + + /* Step 2 - Set target frequency */ + if (ctrl->tCK <= TCK_533MHZ) { + val = 0x07; + ctrl->tCK = TCK_533MHZ; + } else if (ctrl->tCK <= TCK_400MHZ) { + val = 0x06; + ctrl->tCK = TCK_400MHZ; + } else if (ctrl->tCK <= TCK_333MHZ) { + val = 0x05; + ctrl->tCK = TCK_333MHZ; + } else { /*ctrl->tCK <= TCK_266MHZ */ + val = 0x04; + ctrl->tCK = TCK_266MHZ; + } + /* Restart the PLL with the desired frequency */ + pci_mod_config8(MCU, 0x90, 0x0f, val); + + /* Step 3 - Wait for PLL to stabilize */ + udelay(2000); + + /* Step 4 - Reset the DLL - Clear [7,4] */ + pci_mod_config8(MCU, 0x6b, 0x90, 0x00); + udelay(2000); + + /* Step 5 - Enable the DLL - Set bits [7,4] to 01b */ + pci_mod_config8(MCU, 0x6b, 0x00, 0x10); + udelay(2000); + + /* Step 6 - Start DLL Calibration - Set bit [7] */ + pci_mod_config8(MCU, 0x6b, 0x00, 0x80); + udelay(5); + + /* Step 7 - Finish DLL Calibration - Clear bit [7] */ + pci_mod_config8(MCU, 0x6b, 0x80, 0x00); + + /* Step 8 - If we have registered DIMMs, we need to set bit[0] */ + if (dimm_is_registered(ctrl->dram_type)) { + printram("Enabling RDIMM support in memory controller\n"); + pci_mod_config8(MCU, 0x6c, 0x00, 0x01); + } +} + +/* + * The VX900 can send the MRS commands directly through hardware + * It does the MR2->MR3->MR1->MR0->LongZQ JEDEC dance + * The parameters that we don't worry about are extracted from the timing + * registers we have programmed earlier. + */ +static void vx900_dram_ddr3_do_hw_mrs(u8 ma_swap, u8 rtt_nom, + u8 ods, u8 rtt_wr, u8 srt, u8 asr) +{ + u16 reg16 = 0; + + printram("Using Hardware method for DRAM MRS commands.\n"); + + reg16 |= ((rtt_wr & 0x03) << 12); + if (srt) + reg16 |= (1 << 9); + if (asr) + reg16 |= (1 << 8); + reg16 |= ((rtt_nom & 0x7) << 4); + reg16 |= ((ods & 0x03) << 2); + if (ma_swap) + reg16 |= (1 << 1); + reg16 |= (1 << 14); + reg16 |= (1 << 0); /* This is the trigger bit */ + printram("Hw MRS set is 0x%4x\n", reg16); + pci_write_config16(MCU, 0xcc, reg16); + /* Wait for MRS commands to be sent */ + while (pci_read_config8(MCU, 0xcc) & 1) ; +} + +/* + * Translate the MRS command into an address on the CPU bus + * + * Take an MRS command (mrs_cmd_t) and translate it to a read address on the CPU + * bus. Thus, reading from the returned address, will issue the correct MRS + * command, assuming we are in MRS mode, of course. + * + * A read from the returned address will produce the correct MRS command + * provided the following conditions are met: + * - The MA pin mapping is set to VX900_MRS_MA_MAP + * - The memory controller's Fun3_RX6B[2:0] is set to 011b (MSR Enable) + */ +static u32 vx900_get_mrs_addr(mrs_cmd_t cmd) +{ + u32 addr = 0; + u8 mrs_type = (cmd >> 16) & 0x07; + /* MA[9:0] <-> A[12:3] */ + addr |= ((cmd & 0x3ff) << 3); + /* MA10 <-> A20 */ + addr |= (((cmd >> 10) & 0x1) << 20); + /* MA[12:11] <-> A[14:13] */ + addr |= (((cmd >> 11) & 0x3) << 13); + /* BA[2:0] <-> A[19:17] */ + addr |= mrs_type << 17; + return addr; +} + +/* + * Here, we do the MR2->MR3->MR1->MR0->LongZQ JEDEC dance manually + * + * Why would we do this in software, when the VX900 can do it in hardware? The + * problem is the hardware sequence seems to be buggy on ranks with mirrored + * pins. Is this a hardware bug or a misconfigured MCU? No idea. + * + * To maintain API compatibility with the function that implements the hardware + * sequence, we don't ask for all parameters. To keep an overall cleaner code + * structure, we don't try to pass down all that information. Instead, we + * extract the extra parameters from the timing registers we have programmed + * earlier. + */ +static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom, + enum ddr3_mr1_ods ods, + enum ddr3_mr2_rttwr rtt_wr, + enum ddr3_mr2_srt_range srt, + enum ddr3_mr2_asr asr) +{ + mrs_cmd_t mrs; + u8 reg8, cas, cwl, twr; + + printram("Using Software method for DRAM MRS commands.\n"); + + /* Get CAS, CWL, and tWR that we programmed earlier */ + reg8 = pci_read_config8(MCU, 0xc0); + cas = (reg8 & 0x07) + 4; + cwl = ((reg8 >> 4) & 0x07) + 4; + reg8 = pci_read_config8(MCU, 0xc2); + twr = (reg8 & 0x07) + 4; + + /* Step 06 - Set Fun3_RX6B[2:0] to 001b (NOP Command Enable). */ + /* Was already done for us before calling us */ + + /* Step 07 - Read a double word from any address of the DIMM. */ + /* Was already done for us before calling us */ + + /* Step 08 - Set Fun3_RX6B[2:0] to 011b (MSR Enable). */ + pci_mod_config8(MCU, 0x6b, 0x07, 0x03); /* MSR Enable */ + + /* Step 09 – Issue MR2 cycle. Read a double word from the address + * depended on DRAM’s Rtt_WR and CWL settings. */ + mrs = ddr3_get_mr2(rtt_wr, srt, asr, cwl); + if (ma_swap) + mrs = ddr3_mrs_mirror_pins(mrs); + volatile_read(vx900_get_mrs_addr(mrs)); + printram("MR2: %.5x\n", mrs); + udelay(1000); + + /* Step 10 – Issue MR3 cycle. Read a double word from the address 60000h + * to set DRAM to normal operation mode. */ + mrs = ddr3_get_mr3(0); + if (ma_swap) + mrs = ddr3_mrs_mirror_pins(mrs); + volatile_read(vx900_get_mrs_addr(mrs)); + printram("MR3: %.5x\n", mrs); + udelay(1000); + + /* Step 11 –Issue MR1 cycle. Read a double word from the address + * depended on DRAM’s output driver impedance and Rtt_Nom settings. + * The DLL enable field, TDQS field, write leveling enable field, + * additive latency field and Qoff field should be set to 0. */ + mrs = ddr3_get_mr1(DDR3_MR1_QOFF_ENABLE, DDR3_MR1_TQDS_DISABLE, rtt_nom, + DDR3_MR1_WRLVL_DISABLE, ods, DDR3_MR1_AL_DISABLE, + DDR3_MR1_DLL_ENABLE); + if (ma_swap) + mrs = ddr3_mrs_mirror_pins(mrs); + volatile_read(vx900_get_mrs_addr(mrs)); + printram("MR1: %.5x\n", mrs); + udelay(1000); + + /* Step 12 - Issue MR0 cycle. Read a double word from the address + * depended on DRAM’s burst length, CAS latency and write recovery time + * settings. + * The read burst type field should be set to interleave. + * The mode field should be set to normal mode. + * The DLL reset field should be set to No. + * The DLL control for precharge PD field should be set to Fast exit. + */ + mrs = ddr3_get_mr0(DDR3_MR0_PRECHARGE_FAST, twr, + DDR3_MR0_DLL_RESET_NO, DDR3_MR0_MODE_NORMAL, cas, + DDR3_MR0_BURST_TYPE_INTERLEAVED, + DDR3_MR0_BURST_LENGTH_CHOP); + volatile_read(vx900_get_mrs_addr(mrs)); + printram("MR0: %.5x\n", mrs); + udelay(1000); + + /* Step 13 - Set Fun3_RX6B[2:0] to 110b (Long ZQ calibration cmd) */ + pci_mod_config8(MCU, 0x6b, 0x07, 0x06); /* Long ZQ */ + /* Step 14 - Read a double word from any address of the DIMM. */ + volatile_read(0); + udelay(1000); +} + +/* + * This is where we take the DIMMs out of reset and do the JEDEC dance for each + * individual physical rank. + */ +static void vx900_dram_ddr3_dimm_init(const ramctr_timing * ctrl, + const rank_layout * ranks) +{ + size_t i; + u8 rtt_nom, rtt_wr, ods, pinswap; + + /* Set BA[0/1/2] to [A17/18/19] */ + vx900_dram_set_ma_pin_map(VX900_MRS_MA_MAP); + + /* Step 01 - Set Fun3_Rx6E[5] to 1b to support burst length. */ + pci_mod_config8(MCU, 0x6e, 0, 1 << 5); + /* Step 02 - Set Fun3_RX69[0] to 0b (Disable Multiple Page Mode). */ + pci_mod_config8(MCU, 0x69, (1 << 0), 0x00); + /* And set [7:6] to 10b ? */ + pci_write_config8(MCU, 0x69, 0x87); + + /* Step 03 - Set the target physical rank to virtual rank0 and other + * ranks to virtual rank3. */ + vx900_pr_map_all_vr3(); + + /* Step 04 - Set Fun3_Rx50 to D8h. */ + pci_write_config8(MCU, 0x50, 0xd8); + /* Step 05 - Set Fun3_RX6B[5] to 1b to de-assert RESET# and wait for at + * least 500 us. */ + pci_mod_config8(MCU, 0x6b, 0x00, (1 << 5)); + udelay(500); + + /* Step 6 -> 15 - Set the target physical rank to virtual rank 0 and + * other ranks to virtual rank 3. + * Repeat Step 6 to 14 for every rank present, then jump to Step 16. */ + for (i = 0; i < VX900_MAX_MEM_RANKS; i++) { + if (ranks->phys_rank_size_mb[i] == 0) + continue; + printram("Initializing rank %lu\n", i); + + /* Set target physical rank to virtual rank 0 + * other ranks to virtual rank 3*/ + vx900_map_pr_vr(i, 0); + + /* FIXME: Is this needed on HW init? */ + pci_mod_config8(MCU, 0x6b, 0x07, 0x01); /* Enable NOP */ + volatile_read(0x0); /* Do NOP */ + pci_mod_config8(MCU, 0x6b, 0x07, 0x03); /* MSR Enable */ + + /* See init_dram_by_rank.c and get_basic_information.c + * in the VIA provided code */ + if (ctrl->n_dimms == 1) { + rtt_nom = DDR3_MR1_RTT_NOM_RZQ2; + rtt_wr = DDR3_MR2_RTTWR_OFF; + } else { + rtt_nom = DDR3_MR1_RTT_NOM_RZQ8; + rtt_wr = DDR3_MR2_RTTWR_RZQ2; + } + ods = ranks->flags[i].rzq7_supported ? + DDR3_MR1_ODS_RZQ7 : DDR3_MR1_ODS_RZQ6; + + pinswap = (ranks->flags[i].pins_mirrored); + if (pinswap) + printram("Pins mirrored\n"); + printram(" Swap : %x\n", pinswap); + printram(" rtt_nom : %x\n", rtt_nom); + printram(" ods : %x\n", ods); + printram(" rtt_wr : %x\n", rtt_wr); + if (RAMINIT_USE_HW_MRS_SEQ) + vx900_dram_ddr3_do_hw_mrs(pinswap, rtt_nom, ods, rtt_wr, + 0, 0); + else + vx900_dram_ddr3_do_sw_mrs(pinswap, rtt_nom, ods, rtt_wr, + 0, 0); + + /* Normal SDRAM Mode */ + pci_mod_config8(MCU, 0x6b, 0x07, 0x00); + + /* Step 15, set the rank to virtual rank 3 */ + vx900_map_pr_vr(i, 3); + } + + /* Step 16 – Set Fun3_Rx6B[2:0] to 000b (Normal SDRAM Mode). */ + pci_mod_config8(MCU, 0x6b, 0x07, 0x00); + + /* Set BA[0/1/2] to [A13/14/15] */ + vx900_dram_set_ma_pin_map(VX900_CALIB_MA_MAP); + + /* Step 17 – Set Fun3_Rx69[0] to 1b (Enable Multiple Page Mode). */ + pci_mod_config8(MCU, 0x69, 0x00, (1 << 0)); + + printram("DIMM initialization sequence complete\n"); +} + +/* + * This a small utility to send a single MRS command, but where we don't want to + * have to worry about changing the MCU mode. It gives the MCU back to us in + * normal operating mode. + */ +static void vx900_dram_send_soft_mrs(mrs_cmd_t cmd, u8 pin_swap) +{ + u32 addr; + /* Set Fun3_RX6B[2:0] to 011b (MSR Enable). */ + pci_mod_config8(MCU, 0x6b, 0x07, (3 << 0)); + /* Is this a funky rank with Address pins swapped? */ + if (pin_swap) + cmd = ddr3_mrs_mirror_pins(cmd); + /* Find the address corresponding to the MRS */ + addr = vx900_get_mrs_addr(cmd); + /* Execute the MRS */ + volatile_read(addr); + /* Set Fun3_Rx6B[2:0] to 000b (Normal SDRAM Mode). */ + pci_mod_config8(MCU, 0x6b, 0x07, 0x00); +} + +static void vx900_dram_enter_read_leveling(u8 pinswap) +{ + /* Precharge all before issuing read leveling MRS to DRAM */ + pci_mod_config8(MCU, 0x06b, 0x07, 0x02); + volatile_read(0x0); + udelay(1000); + + /* Enable read leveling: Set D0F3Rx71[7]=1 */ + pci_mod_config8(MCU, 0x71, 0, (1 << 7)); + + /* Put DRAM in read leveling mode */ + mrs_cmd_t cmd = ddr3_get_mr3(1); + vx900_dram_send_soft_mrs(cmd, pinswap); +} + +static void vx900_dram_exit_read_leveling(u8 pinswap) +{ + /* Disable read leveling, and put dram in normal operation mode */ + mrs_cmd_t cmd = ddr3_get_mr3(0); + vx900_dram_send_soft_mrs(cmd, pinswap); + + /* Disable read leveling: Set D0F3Rx71[7]=0 */ + pci_mod_config8(MCU, 0x71, (1 << 7), 0); +} + +/* + * We need to see if the delay window (difference between minimum and maximum) + * is large enough so that we actually have a valid window. The signal should be + * valid for at least 1/2T in general. If the window is significantly smaller, + * then chances are our window does not latch at the correct time, and the + * calibration will not work. + */ +#define DQSI_THRESHOLD 0x10 +#define DQO_THRESHOLD 0x09 +#define DQSO_THRESHOLD 0x12 +#define DELAY_RANGE_GOOD 0 +#define DELAY_RANGE_BAD -1 +static u8 vx900_dram_check_calib_range(const delay_range * dly, u8 window) +{ + size_t i; + for (i = 0; i < 8; i++) { + if (dly->high[i] - dly->low[i] < window) + return DELAY_RANGE_BAD; + /* When our maximum value is lower than our min, both values + * have overshot, and the window is definitely invalid */ + if (dly->high[i] < dly->low[i]) + return DELAY_RANGE_BAD; + } + return DELAY_RANGE_GOOD; +} + +static void vx900_dram_find_avg_delays(vx900_delay_calib * delays) +{ + size_t i; + u16 dq_low, dq_high, dqs_low, dqs_high, dq_final, dqs_final; + /* + * At this point, we have transmit delays for both DIMMA and DIMMB, each + * with a slightly different window We want to find the intersection of + * those windows, so that we have a constrained window which both + * DIMMA and DIMMB can use. The center of our constrained window will + * also be the safest setting for the transmit delays + * + * DIMMA window t:|xxxxxxxxxxxxxx---------------xxxxxxxxxxxxxxxxxxxxxxx| + * DIMMB window t:|xxxxxxxxxxxxxxxxxxx---------------xxxxxxxxxxxxxxxxxx| + * Safe window t:|xxxxxxxxxxxxxxxxxxx----------xxxxxxxxxxxxxxxxxxxxxxx| + */ + delay_range *tx_dq_a = &(delays->tx_dq[0]); + delay_range *tx_dq_b = &(delays->tx_dq[1]); + delay_range *tx_dqs_a = &(delays->tx_dqs[0]); + delay_range *tx_dqs_b = &(delays->tx_dqs[1]); + + for (i = 0; i < 8; i++) { + dq_low = max(tx_dq_a->low[i], tx_dq_b->low[i]); + dq_high = min(tx_dq_a->high[i], tx_dq_b->high[i]); + dqs_low = max(tx_dqs_a->low[i], tx_dqs_b->low[i]); + dqs_high = min(tx_dqs_a->high[i], tx_dqs_b->high[i]); + + /* Find the average */ + dq_final = ((dq_low + dq_high) / 2); + dqs_final = ((dqs_low + dqs_high) / 2); + + /* + * These adjustments are done in code provided by VIA. + * There is no explanation as to why this is done. + * + * We can get away without doing the DQS adjustment, but doing + * it, brings the values closer to what the vendor BIOS + * calibrates to. + */ + if ((dqs_final & 0x1f) >= 0x1c) + dqs_final -= 0x1c; + else + dqs_final += 0x04; + /* + * The DQ adjustment is more critical. If we don't do this + * adjustment our MCU won't be configured properly, and + * ram_check() will fail. + */ + if ((dq_final & 0x1f) >= 0x14) + dq_final -= 0x14; + else + dq_final += 0x0c; + + /* Store our values in the first delay */ + delays->tx_dq[0].avg[i] = dq_final; + delays->tx_dqs[0].avg[i] = dqs_final; + + } +} + +/* + * First calibration: When to receive data from the DRAM + * (MD and MDQS input delay) + * + * This calibration unfortunately does not seem to work. Whether this is due to + * a misconfigured MCU or hardware bug is unknown. + */ +static void vx900_rx_capture_range_calib(u8 pinswap) +{ + u8 reg8; + const u32 cal_addr = 0x20; + + /* Set IO calibration address */ + pci_mod_config16(MCU, 0x8c, 0xfff0, cal_addr & (0xfff0)); + /* Data pattern must be 0x00 for this calibration + * See paragraph describing Rx8e */ + pci_write_config8(MCU, 0x8e, 0x00); + + /* Need to put DRAM and MCU in read leveling */ + vx900_dram_enter_read_leveling(pinswap); + + /* Data pattern must be 0x00 for this calibration + * See paragraph describing Rx8e */ + pci_write_config8(MCU, 0x8e, 0x00); + /* Trigger calibration */ + reg8 = 0xa0; + pci_write_config8(MCU, 0x71, reg8); + + /* Wait for it */ + while (pci_read_config8(MCU, 0x71) & 0x10) ; + vx900_dram_exit_read_leveling(pinswap); +} + +/* + * Second calibration: How much to delay DQS signal by + * (MDQS input delay) + */ +static void vx900_rx_dqs_delay_calib(u8 pinswap) +{ + const u32 cal_addr = 0x30; + + /* We need to disable refresh commands so that they don't interfere */ + const u8 ref_cnt = pci_read_config8(MCU, 0xc7); + pci_write_config8(MCU, 0xc7, 0); + /* Set IO calibration address */ + pci_mod_config16(MCU, 0x8c, 0xfff0, cal_addr & (0xfff0)); + /* Data pattern must be 0x00 for this calibration + * See paragraph describing Rx8e */ + pci_write_config8(MCU, 0x8e, 0x00); + + /* Need to put DRAM and MCU in read leveling */ + vx900_dram_enter_read_leveling(pinswap); + + /* From VIA code; Undocumented + * In theory this enables MODT[3:0] to be asserted */ + pci_mod_config8(MCU, 0x9e, 0, 0x80); + + /* Trigger calibration: Set D0F3Rx71[1:0]=10b */ + pci_mod_config8(MCU, 0x71, 0x03, 0x02); + + /* Wait for calibration to complete */ + while (pci_read_config8(MCU, 0x71) & 0x02) ; + vx900_dram_exit_read_leveling(pinswap); + + /* Restore the refresh counter */ + pci_write_config8(MCU, 0xc7, ref_cnt); + + /* FIXME: should we save it before, or should we just set it as is */ + vx900_dram_set_ma_pin_map(VX900_CALIB_MA_MAP); +} + +static void vx900_tx_dqs_trigger_calib(u8 pattern) +{ + /* Data pattern for calibration */ + pci_write_config8(MCU, 0x8e, pattern); + /* Trigger calibration */ + pci_mod_config8(MCU, 0x75, 0, 0x20); + /* Wait for calibration */ + while (pci_read_config8(MCU, 0x75) & 0x20) ; +} + +/* + * Third calibration: How much to wait before asserting DQS + */ +static void vx900_tx_dqs_delay_calib(void) +{ + const u32 cal_addr = 0x00; + /* Set IO calibration address */ + pci_mod_config16(MCU, 0x8c, 0xfff0, cal_addr & (0xfff0)); + /* Set circuit to use calibration results - Clear Rx75[0] */ + pci_mod_config8(MCU, 0x75, 0x01, 0); + /* Run calibration with first data pattern */ + vx900_tx_dqs_trigger_calib(0x5a); + /* Run again with different pattern */ + vx900_tx_dqs_trigger_calib(0xa5); +} + +/* + * Fourt calibration: How much to wait before putting data on DQ lines + */ +static void vx900_tx_dq_delay_calib(void) +{ + /* Data pattern for calibration */ + pci_write_config8(MCU, 0x8e, 0x5a); + /* Trigger calibration */ + pci_mod_config8(MCU, 0x75, 0, 0x02); + /* Wait for calibration */ + while (pci_read_config8(MCU, 0x75) & 0x02) ; +} + +static void vx900_rxdqs_adjust(delay_range * dly) +{ + /* Adjust Rx DQS delay after calibration has been run. This is + * recommended by VIA, but no explanation was provided as to why */ + size_t i; + for (i = 0; i < 8; i++) { + if (dly->low[i] < 3) { + if (i == 2 || i == 4) + dly->avg[i] += 4; + else + dly->avg[i] += 3; + + } + + if (dly->high[i] > 0x38) + dly->avg[i] -= 6; + else if (dly->high[i] > 0x30) + dly->avg[i] -= 4; + + if (dly->avg[i] > 0x20) + dly->avg[i] = 0x20; + } + + /* Put Rx DQS delay into manual mode (Set Rx[2,0] to 01) */ + pci_mod_config8(MCU, 0x71, 0x05, 0x01); + /* Now write the new settings */ + vx900_delay_calib_mode_select(CALIB_RxDQS, CALIB_MANUAL); + vx900_write_0x78_0x7f(dly->avg); +} + +static void vx900_dram_calibrate_recieve_delays(vx900_delay_calib * delays, + u8 pinswap) +{ + size_t n_tries = 0; + delay_range *rx_dq_cr = &(delays->rx_dq_cr); + delay_range *rx_dqs = &(delays->rx_dqs); + /* We really should be able to finish this in a single pass, but it may + * in very rare circumstances not work the first time. We define a limit + * on the number of tries so that we have a way of warning the user */ + const size_t max_tries = 100; + for (;;) { + if (n_tries++ >= max_tries) { + die("Could not calibrate receive delays. Giving up"); + } + u8 result; + /* Run calibrations */ + if (RAMINIT_USE_HW_RXCR_CALIB) { + vx900_rx_capture_range_calib(pinswap); + vx900_read_delay_range(rx_dq_cr, CALIB_RxDQ_CR); + dump_delay_range(*rx_dq_cr); + + } else { + /*FIXME: Cheating with Rx CR setting\ + * We need to either use Rx CR calibration + * or set up a table for the calibration */ + u8 *override = &(rx_dq_cr->avg[0]); + override[0] = 0x28; + override[1] = 0x1c; + override[2] = 0x28; + override[3] = 0x28; + override[4] = 0x2c; + override[5] = 0x30; + override[6] = 0x30; + override[7] = 0x34; + printram("Bypassing RxCR 78-7f calibration with:\n"); + dump_delay(rx_dq_cr->avg); + } + /* We need to put the setting on manual mode */ + pci_mod_config8(MCU, 0x71, 0, 1 << 4); + vx900_delay_calib_mode_select(CALIB_RxDQ_CR, CALIB_MANUAL); + vx900_write_0x78_0x7f(rx_dq_cr->avg); + + /************* RxDQS *************/ + vx900_rx_dqs_delay_calib(pinswap); + vx900_read_delay_range(rx_dqs, CALIB_RxDQS); + vx900_rxdqs_adjust(rx_dqs); + + result = vx900_dram_check_calib_range(rx_dqs, DQSI_THRESHOLD); + if (result != DELAY_RANGE_GOOD) + continue; + + /* We're good to go. Switch to manual and write the manual + * setting */ + pci_mod_config8(MCU, 0x71, 0, 1 << 0); + vx900_delay_calib_mode_select(CALIB_RxDQS, CALIB_MANUAL); + vx900_write_0x78_0x7f(rx_dqs->avg); + break; + } + if (n_tries > 1) + printram("Hmm, we had to try %lu times before our calibration " + "was good.\n", n_tries); +} + +static void vx900_dram_calibrate_transmit_delays(delay_range * tx_dq, + delay_range * tx_dqs) +{ + /* Same timeout reasoning as in receive delays */ + size_t n_tries = 0; + int dq_tries = 0, dqs_tries = 0;; + const size_t max_tries = 100; + for (;;) { + if (n_tries++ >= max_tries) { + printram("Tried DQS %i times and DQ %i times\n", + dqs_tries, dq_tries); + printram("Tx DQS calibration results\n"); + dump_delay_range(*tx_dqs); + printram("TX DQ delay calibration results:\n"); + dump_delay_range(*tx_dq); + die("Could not calibrate transmit delays. Giving up"); + } + u8 result; + /************* TxDQS *************/ + dqs_tries++; + vx900_tx_dqs_delay_calib(); + vx900_read_delay_range(tx_dqs, CALIB_TxDQS); + + result = vx900_dram_check_calib_range(tx_dqs, DQSO_THRESHOLD); + if (result != DELAY_RANGE_GOOD) + continue; + + /************* TxDQ *************/ + /* FIXME: not sure if multiple page mode should be enabled here + * Vendor BIOS does it */ + pci_mod_config8(MCU, 0x69, 0, 0x01); + + dq_tries++; + vx900_tx_dq_delay_calib(); + vx900_read_delay_range(tx_dq, CALIB_TxDQ); + + result = vx900_dram_check_calib_range(tx_dq, DQO_THRESHOLD); + if (result != DELAY_RANGE_GOOD) + continue; + + /* At this point, our RAM should give correct read-backs for + * addresses under 64 MB. If it doesn't, it won't work */ + if (ram_check_noprint_nodie(1 << 20, 1 << 20)) { + /* No, our RAM is not working, try again */ + /* FIXME: Except that we have not yet told the MCU what + * the geometry of the DIMM is, hence we don't trust + * this test for now */ + ////continue; + } + /* Good. We should be able to use this DIMM */ + /* That's it. We're done */ + break; + } + if (n_tries > 1) + printram("Hmm, we had to try %lu times before our calibration " + "was good.\n", n_tries); +} + +/* + * The meat and potatoes of getting our MCU to operate the DIMMs properly. + * + * Thank you JEDEC for making us need configurable delays for each set of MD + * signals. + */ +static void vx900_dram_calibrate_delays(const ramctr_timing * ctrl, + const rank_layout * ranks) +{ + size_t i; + u8 val; + u8 dimm; + vx900_delay_calib delay_cal; + memset(&delay_cal, 0, sizeof(delay_cal)); + printram("Starting delay calibration\n"); + + /**** Read delay control ****/ + /* MD Input Data Push Timing Control; + * use values recommended in datasheet + * Setting this too low causes the Rx window to move below the range we + * need it so we can capture it with Rx_78_7f + * This causes Rx calibrations to be too close to 0, and Tx + * calibrations will fail. + * Setting this too high causes the window to move above the range. + */ + if (ctrl->tCK <= TCK_533MHZ) + val = 2; + else if (ctrl->tCK <= TCK_333MHZ) + val = 1; + else + val = 0; + val++; /* FIXME: vendor BIOS sets this to 3 */ + pci_mod_config8(MCU, 0x74, (0x03 << 1), ((val & 0x03) << 1)); + + /* FIXME: The vendor BIOS increases the MD input delay - WHY ? */ + pci_mod_config8(MCU, 0xef, (3 << 4), 3 << 4); + + /**** Write delay control ****/ + /* FIXME: The vendor BIOS does this, but WHY? + * See check_special_registers in VIA provided code. This value seems + * to depend on the DRAM frequency. + */ + /* Early DQ/DQS for write cycles */ + pci_mod_config8(MCU, 0x76, (3 << 2), 2 << 2); + /* FIXME: The vendor BIOS does this - Output preamble ? */ + pci_write_config8(MCU, 0x77, 0x10); + + /* Set BA[0/1/2] to [A17/18/19] */ + vx900_dram_set_ma_pin_map(VX900_MRS_MA_MAP); + /* Disable Multiple Page Mode - Set Rx69[0] to 0 */ + pci_mod_config8(MCU, 0x69, (1 << 0), 0x00); + + /* It's very important that we keep all ranks which are not calibrated + * mapped to VR3. Even if we disable them, if they are mapped to VR0 + * (the rank we use for calibrations), the calibrations may fail in + * unexpected ways. */ + vx900_pr_map_all_vr3(); + + /* We only really need to run the receive calibrations once. They are + * meant to account for signal travel differences in the internal paths + * of the MCU, so it doesn't really matter which rank we use for this. + * Differences between ranks will be accounted for in the transmit + * calibration. */ + for (i = 0; i < VX900_MAX_DIMM_SLOTS; i += 2) { + /* Do we have a valid DIMM? */ + if (ranks->phys_rank_size_mb[i] + + ranks->phys_rank_size_mb[i + 1] == 0) + continue; + /* Map the first rank of the DIMM to VR0 */ + vx900_map_pr_vr(2 * i, 0); + /* Only run on first rank, remember? */ + break; + } + vx900_dram_calibrate_recieve_delays(&delay_cal, + ranks->flags[i].pins_mirrored); + printram("RX DQS calibration results\n"); + dump_delay_range(delay_cal.rx_dqs); + + /* Enable multiple page mode for when calibrating transmit delays */ + pci_mod_config8(MCU, 0x69, 0, 1 << 1); + + /* + * Unlike the receive delays, we need to run the transmit calibration + * for each DIMM (not rank). We run the calibration on the even rank. + * The odd rank may have memory pins swapped, and this, it seems, + * confuses the calibration circuit. + */ + dimm = 0; + for (i = 0; i < VX900_MAX_DIMM_SLOTS; i++) { + /* Do we have a valid DIMM? */ + u32 dimm_size_mb = ranks->phys_rank_size_mb[2 * i] + + ranks->phys_rank_size_mb[2 * i + 1]; + if (dimm_size_mb == 0) + continue; + /* Map the first rank of the DIMM to VR0 */ + vx900_map_pr_vr(2 * i, 0); + vx900_dram_calibrate_transmit_delays(&(delay_cal.tx_dq[dimm]), + &(delay_cal.tx_dqs[dimm])); + /* We run this more than once, so dump delays for each DIMM */ + printram("Tx DQS calibration results\n"); + dump_delay_range(delay_cal.tx_dqs[dimm]); + printram("TX DQ delay calibration results:\n"); + dump_delay_range(delay_cal.tx_dq[dimm]); + /* Now move the DIMM back to VR3 */ + vx900_map_pr_vr(2 * i, 3); + /* We use dimm as a counter so that we fill tx_dq[] and tx_dqs[] + * results in order from 0, and do not leave any gaps */ + dimm++; + } + + /* When we have more dimms, we need to find a tx window with which all + * dimms can safely work */ + if (dimm > 1) { + vx900_dram_find_avg_delays(&delay_cal); + printram("Final delay values\n"); + printram("Tx DQS: "); + dump_delay(delay_cal.tx_dqs[0].avg); + printram("Tx DQ: "); + dump_delay(delay_cal.tx_dq[0].avg); + } + /* Write manual settings */ + pci_mod_config8(MCU, 0x75, 0, 0x01); + vx900_delay_calib_mode_select(CALIB_TxDQS, CALIB_MANUAL); + vx900_write_0x78_0x7f(delay_cal.tx_dqs[0].avg); + vx900_delay_calib_mode_select(CALIB_TxDQ, CALIB_MANUAL); + vx900_write_0x78_0x7f(delay_cal.tx_dq[0].avg); +} + +static void vx900_dram_set_refresh_counter(ramctr_timing * ctrl) +{ + u8 reg8; + /* Set DRAM refresh counter + * Based on a refresh counter of 0x61 at 400MHz */ + reg8 = (TCK_400MHZ * 0x61) / ctrl->tCK; + pci_write_config8(MCU, 0xc7, reg8); +} + +/* + * Here, we map each rank somewhere in our address space. We don't really care + * at this point if this will overlap the PCI config space. If needed, remapping + * is done in ramstage, where we actually know how much PCI space we actually + * need. + */ +static void vx900_dram_range(ramctr_timing * ctrl, rank_layout * ranks) +{ + size_t i, vrank = 0; + u8 reg8; + u32 ramsize_mb = 0, tolm_mb; + const u32 TOLM_3_5G = (7 << 29); + /* All unused physical ranks go to VR3. Otherwise, the MCU might be + * trying to read or write from unused ranks, or even worse, write some + * bits to the rank we want, and some to the unused ranks, even though + * they are disabled. Since VR3 is the last virtual rank to be used, we + * eliminate any ambiguities that the MCU may face. */ + vx900_pr_map_all_vr3(); + for (i = 0; i < VX900_MAX_MEM_RANKS; i++) { + u32 rank_size_mb = ranks->phys_rank_size_mb[i]; + if (!rank_size_mb) + continue; + + /* vvvvvvvvvv FIXME: Fix odd rank init vvvvvvvvvv */ + if ((i & 1)) { + printk(BIOS_EMERG, "I cannot initialize rank %li\n", i); + print_emerg("I have to disable it\n"); + continue; + } + /* ^^^^^^^^^^ FIXME: Fix odd rank init ^^^^^^^^^^ */ + + ranks->virt[vrank].start_addr = ramsize_mb; + ramsize_mb += rank_size_mb; + ranks->virt[vrank].end_addr = ramsize_mb; + + /* Rank memory range */ + reg8 = (ranks->virt[vrank].start_addr >> 6); + pci_write_config8(MCU, 0x48 + vrank, reg8); + reg8 = (ranks->virt[vrank].end_addr >> 6); + pci_write_config8(MCU, 0x40 + vrank, reg8); + + vx900_map_pr_vr(i, vrank); + + printram("Mapped Physical rank %u, to virtual rank %u\n" + " Start address: 0x%.10llx\n" + " End address: 0x%.10llx\n", + (int)i, (int)vrank, + (u64) ranks->virt[vrank].start_addr << 20, + (u64) ranks->virt[vrank].end_addr << 20); + /* Move on to next virtual rank */ + vrank++; + } + + /* Limit the Top of Low memory at 3.5G + * Not to worry, we'll set tolm in ramstage, once we have initialized + * all devices and know pci_tolm. */ + tolm_mb = min(ramsize_mb, TOLM_3_5G >> 20); + u16 reg_tolm = (tolm_mb << 4) & 0xfff0; + pci_mod_config16(MCU, 0x84, 0xfff0, reg_tolm); + + printram("Initialized %u virtual ranks, with a total size of %u MB\n", + (int)vrank, ramsize_mb); +} + +/* + * Here, we tell the memory controller how to treat a DIMM. This is an extremely + * important step. It tells the MCU how many address bits we have in each DIMM, + * and how to use them. This information is essential for the controller to + * understand the DIMM addressing, and write and read data in the correct place. + */ +static void vx900_dram_map_row_col_bank(dimm_info * dimms) +{ + u8 reg8, rcb_val, col_bits, max_row_bits; + size_t i; + /* Do we have 4Gbit chips? */ + /* FIXME: Implement this */ + + /* Do we have 8Gbit chips? */ + /* FIXME: Implement this */ + + max_row_bits = rcb_val = reg8 = 0; + for (i = 0; i < VX900_MAX_DIMM_SLOTS; i++) { + if (dimms->dimm[i].dram_type == SPD_MEMORY_TYPE_UNDEFINED) + continue; + + col_bits = dimms->dimm[i].col_bits; + + /* + * DDR3 always uses 3 bank address bits, and MA type 111b cannot + * be used due to chipset limitation. We are left with only two + * options, which we can choose based solely on the number of + * column address bits. + */ + if ((col_bits < 10) || (col_bits > 11)) { + printram("DIMM %ld has %d column address bits.\n", + i, col_bits); + die("Unsupported DIMM. Try booting without this DIMM"); + } + + rcb_val = col_bits - 5; + reg8 |= (rcb_val << ((i * 3) + 2)); + + /* */ + max_row_bits = max(max_row_bits, dimms->dimm[i].row_bits); + } + + printram("RCBA map (rx50) <- %.2x\n", reg8); + pci_write_config8(MCU, 0x50, reg8); + + printram("Houston, we have %d row address bits\n", max_row_bits); + /* FIXME: Do this properly */ + vx900_dram_map_pins(13, 14, 15, 17, 16); + +} + +/* + * Here, we set some final configuration bits, which should improve the + * performance of the memory slightly (arbitration, expiration counters, etc.) + * + * FIXME: We don't really do much else than the minimum to get the MCU properly + * configured. We don't yet do set the "performance-enhancing" bits referenced + * in the comment above. + */ +static void vx900_dram_write_final_config(ramctr_timing * ctrl) +{ + /* FIXME: These are quick cheats */ + + /* FIXME: Why are we doing this? */ + /* Tri-state MCSi# when rank is in self-refresh */ + pci_mod_config8(MCU, 0x99, 0, 0x0f); + + ////pci_write_config8(MCU, 0x69, 0xe7); + /* Enable paging mode and 8 page registers */ + pci_mod_config8(MCU, 0x69, 0, 0xe5); + ////pci_write_config8(MCU, 0x72, 0x0f); + + ////pci_write_config8(MCU, 0x97, 0xa4); /* self-refresh */ + ////pci_write_config8(MCU, 0x98, 0xba); /* self-refresh II */ + ////pci_write_config8(MCU, 0x9a, 0x80); /* self-refresh III */ + + /* Enable automatic triggering of short ZQ calibration */ + pci_write_config8(MCU, 0xc8, 0x80); + + /* And last but not least, Enable A20 line */ + outb(inb(0x92) | (1 << 1), 0x92); +} + +void vx900_init_dram_ddr3(const dimm_layout * dimm_addr) +{ + dimm_info dimm_prop; + ramctr_timing ctrl_prop; + rank_layout ranks; + device_t mcu; + + if (!ram_check_noprint_nodie(1 << 20, 1 << 20)) { + printram("RAM is already initialized. Skipping init\n"); + return; + } + /* Locate the Memory controller */ + mcu = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VX900_MEMCTRL), 0); + + if (mcu == PCI_DEV_INVALID) { + die("Memory Controller not found\n"); + } + memset(&dimm_prop, 0, sizeof(dimm_prop)); + memset(&ctrl_prop, 0, sizeof(ctrl_prop)); + memset(&ranks, 0, sizeof(ranks)); + /* 1) Write some initial "safe" parameters */ + vx900_dram_write_init_config(); + /* 2) Get timing information from SPDs */ + dram_find_spds_ddr3(dimm_addr, &dimm_prop); + /* 3) Find lowest common denominator for all modules */ + dram_find_common_params(&dimm_prop, &ctrl_prop); + /* 4) Find the size of each memory rank */ + vx900_dram_phys_bank_range(&dimm_prop, &ranks); + /* 5) Set DRAM driving strength */ + vx900_dram_driving_ctrl(&dimm_prop); + /* 6) Set DRAM frequency and latencies */ + vx900_dram_timing(&ctrl_prop); + vx900_dram_freq(&ctrl_prop); + /* 7) Initialize the modules themselves */ + vx900_dram_ddr3_dimm_init(&ctrl_prop, &ranks); + /* 8) Set refresh counter based on DRAM frequency */ + vx900_dram_set_refresh_counter(&ctrl_prop); + /* 9) Calibrate receive and transmit delays */ + vx900_dram_calibrate_delays(&ctrl_prop, &ranks); + /* 10) Enable Physical to Virtual Rank mapping */ + vx900_dram_range(&ctrl_prop, &ranks); + /* 11) Map address bits to DRAM pins */ + vx900_dram_map_row_col_bank(&dimm_prop); + /* 99) Some final adjustments */ + vx900_dram_write_final_config(&ctrl_prop); + /* Take a dump */ + dump_pci_device(mcu); +} diff --git a/src/northbridge/via/vx900/vx900.h b/src/northbridge/via/vx900/vx900.h index c895e3d246..52c895c598 100644 --- a/src/northbridge/via/vx900/vx900.h +++ b/src/northbridge/via/vx900/vx900.h @@ -33,8 +33,8 @@ #define VX900_MAX_DIMM_SLOTS 2 #define VX900_MAX_MEM_RANKS 4 -#define min(a,b) a<b?a:b -#define max(a,b) a>b?a:b +#define min(a,b) (a<b?a:b) +#define max(a,b) (a>b?a:b) #include <arch/io.h> #include <device/pci.h> |