summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
authorKeith Hui <buurin@gmail.com>2010-12-23 17:12:03 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2010-12-23 17:12:03 +0000
commit09f5a7446a016b845f421a3a6e10deedb4a101ed (patch)
treef58f4a78030f9e09ea770ab1770f31d40f3775dd /src/northbridge
parentd43498d1be832f01ea43bb2450759dfdae3e7cbd (diff)
downloadcoreboot-09f5a7446a016b845f421a3a6e10deedb4a101ed.tar.xz
Fix build with CONFIG_DEBUG_RAM_SETUP on Intel 440BX, use printk().
It's a good thing to use printk() instead of print_*() anyway on 440BX (and other chipsets which have been converted to CAR). Build tested and boot-tested on ASUS P2B-LS. Signed-off-by: Keith Hui <buurin@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6206 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/intel/i440bx/debug.c48
-rw-r--r--src/northbridge/intel/i440bx/raminit.c52
2 files changed, 26 insertions, 74 deletions
diff --git a/src/northbridge/intel/i440bx/debug.c b/src/northbridge/intel/i440bx/debug.c
index 1d8cbf6a57..81b9fd8deb 100644
--- a/src/northbridge/intel/i440bx/debug.c
+++ b/src/northbridge/intel/i440bx/debug.c
@@ -1,66 +1,34 @@
#include "raminit.h"
+#include <spd.h>
+#include <console/console.h>
void dump_spd_registers(void)
{
#if CONFIG_DEBUG_RAM_SETUP
int i;
- print_debug("\n");
+ printk(BIOS_DEBUG, "\n");
for(i = 0; i < DIMM_SOCKETS; i++) {
unsigned device;
device = DIMM0 + i;
if (device) {
int j;
- print_debug("dimm: ");
- print_debug_hex8(i);
- print_debug(".0: ");
- print_debug_hex8(device);
+ printk(BIOS_DEBUG, "DIMM %d: %02x", i, device);
for(j = 0; j < 256; j++) {
int status;
unsigned char byte;
if ((j & 0xf) == 0) {
- print_debug("\n");
- print_debug_hex8(j);
- print_debug(": ");
+ printk(BIOS_DEBUG, "\n%02x: ", j);
}
status = spd_read_byte(device, j);
if (status < 0) {
- print_debug("bad device\n");
+ printk(BIOS_DEBUG, "bad device\n");
break;
}
byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
+ printk(BIOS_DEBUG, "%02x ", byte);
}
- print_debug("\n");
+ printk(BIOS_DEBUG, "\n");
}
}
#endif
}
-
-#if 0
-void dump_spd_registers(void)
-{
- unsigned device;
- device = SMBUS_MEM_DEVICE_START;
- printk(BIOS_DEBUG, "\n");
- while(device <= SMBUS_MEM_DEVICE_END) {
- int status = 0;
- int i;
- printk(BIOS_DEBUG, "dimm %02x", device);
- for(i = 0; (i < 256) && (status == 0); i++) {
- unsigned char byte;
- if ((i % 20) == 0) {
- printk(BIOS_DEBUG, "\n%3d: ", i);
- }
- status = smbus_read_byte(device, i, &byte);
- if (status != 0) {
- printk(BIOS_DEBUG, "bad device\n");
- continue;
- }
- printk(BIOS_DEBUG, "%02x ", byte);
- }
- device += SMBUS_MEM_DEVICE_INC;
- printk(BIOS_DEBUG, "\n");
- }
-}
-#endif
diff --git a/src/northbridge/intel/i440bx/raminit.c b/src/northbridge/intel/i440bx/raminit.c
index 205d40f4d1..b7d5b29ed8 100644
--- a/src/northbridge/intel/i440bx/raminit.c
+++ b/src/northbridge/intel/i440bx/raminit.c
@@ -38,13 +38,14 @@ Macros and definitions.
/* Debugging macros. */
#if CONFIG_DEBUG_RAM_SETUP
-#define PRINT_DEBUG(x) print_debug(x)
-#define PRINT_DEBUG_HEX8(x) print_debug_hex8(x)
-#define PRINT_DEBUG_HEX16(x) print_debug_hex16(x)
-#define PRINT_DEBUG_HEX32(x) print_debug_hex32(x)
+#include "lib/debug.c"
+#define PRINT_DEBUG(x...) printk(BIOS_DEBUG, x)
+#define PRINT_DEBUG_HEX8(x) PRINT_DEBUG("%02x", x)
+#define PRINT_DEBUG_HEX16(x) PRINT_DEBUG("%04x", x)
+#define PRINT_DEBUG_HEX32(x) PRINT_DEBUG("%08x", x)
#define DUMPNORTH() dump_pci_device(NB)
#else
-#define PRINT_DEBUG(x)
+#define PRINT_DEBUG(x...)
#define PRINT_DEBUG_HEX8(x)
#define PRINT_DEBUG_HEX16(x)
#define PRINT_DEBUG_HEX32(x)
@@ -621,11 +622,7 @@ static void spd_enable_refresh(void)
continue;
reg = (reg & 0xf8) | refresh_rate_map[(value & 0x7f)];
- PRINT_DEBUG(" Enabling refresh (DRAMC = 0x");
- PRINT_DEBUG_HEX8(reg);
- PRINT_DEBUG(") for DIMM ");
- PRINT_DEBUG_HEX8(i);
- PRINT_DEBUG("\n");
+ PRINT_DEBUG(" Enabling refresh (DRAMC = 0x%02x) for DIMM %02x\n", reg, i);
}
pci_write_config8(NB, DRAMC, reg);
@@ -662,8 +659,8 @@ void sdram_set_registers(void)
}
struct dimm_size {
- unsigned long side1;
- unsigned long side2;
+ u32 side1;
+ u32 side2;
};
static struct dimm_size spd_get_dimm_size(unsigned int device)
@@ -718,15 +715,13 @@ static struct dimm_size spd_get_dimm_size(unsigned int device)
* modules by setting them to a supported size.
*/
if(sz.side1 > 128) {
- PRINT_DEBUG("Side1 was 0x");
- PRINT_DEBUG_HEX16(sz.side1);
- PRINT_DEBUG(" but only 128MB will be used.\n");
+ PRINT_DEBUG("Side1 was %dMB but only 128MB will be used.\n",
+ sz.side1);
sz.side1 = 128;
if(sz.side2 > 128) {
- PRINT_DEBUG("Side2 was 0x");
- PRINT_DEBUG_HEX16(sz.side2);
- PRINT_DEBUG(" but only 128MB will be used.\n");
+ PRINT_DEBUG("Side2 was %dMB but only 128MB will be used.\n",
+ sz.side2);
sz.side2 = 128;
}
}
@@ -759,15 +754,12 @@ static void set_dram_row_attributes(void)
if (value == SPD_MEMORY_TYPE_EDO
|| value == SPD_MEMORY_TYPE_SDRAM) {
- PRINT_DEBUG("Found ");
if (value == SPD_MEMORY_TYPE_EDO) {
edosd |= 0x02;
} else if (value == SPD_MEMORY_TYPE_SDRAM) {
edosd |= 0x04;
}
- PRINT_DEBUG("DIMM in slot ");
- PRINT_DEBUG_HEX8(i);
- PRINT_DEBUG("\n");
+ PRINT_DEBUG("Found DIMM in slot %d\n", i);
if (edosd == 0x06) {
print_err("Mixing EDO/SDRAM unsupported!\n");
@@ -925,21 +917,15 @@ static void set_dram_row_attributes(void)
/* Set paging policy register. */
pci_write_config8(NB, PGPOL + 1, bpr);
- PRINT_DEBUG("PGPOL[BPR] has been set to 0x");
- PRINT_DEBUG_HEX8(bpr);
- PRINT_DEBUG("\n");
+ PRINT_DEBUG("PGPOL[BPR] has been set to 0x%02x\n", bpr);
/* Set DRAM row page size register. */
pci_write_config16(NB, RPS, rps);
- PRINT_DEBUG("RPS has been set to 0x");
- PRINT_DEBUG_HEX16(rps);
- PRINT_DEBUG("\n");
+ PRINT_DEBUG("RPS has been set to 0x%04x\n", rps);
/* ### ECC */
pci_write_config8(NB, NBXCFG + 3, nbxecc);
- PRINT_DEBUG("NBXECC[31:24] has been set to 0x");
- PRINT_DEBUG_HEX8(nbxecc);
- PRINT_DEBUG("\n");
+ PRINT_DEBUG("NBXECC[31:24] has been set to 0x%02x\n", nbxecc);
/* Set DRAMC[4:3] to proper memory type (EDO/SDRAM).
* TODO: Registered SDRAM support.
@@ -956,9 +942,7 @@ static void set_dram_row_attributes(void)
value = pci_read_config8(NB, DRAMC) & 0xe7;
value |= edosd;
pci_write_config8(NB, DRAMC, value);
- PRINT_DEBUG("DRAMC has been set to 0x");
- PRINT_DEBUG_HEX8(value);
- PRINT_DEBUG("\n");
+ PRINT_DEBUG("DRAMC has been set to 0x%02x\n", value);
}
void sdram_set_spd_registers(void)