summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
authorMartin Roth <martinroth@google.com>2016-07-29 14:07:30 -0600
committerStefan Reinauer <stefan.reinauer@coreboot.org>2016-08-01 21:44:45 +0200
commit0cd338e6e489eacfedb8fab3ff161b1578d08f07 (patch)
tree8b729260de5a406dc22869ff5c5236ba77fbb0ed /src/northbridge
parentbb9722bd775d575401edff14a9b80406ecbd974a (diff)
downloadcoreboot-0cd338e6e489eacfedb8fab3ff161b1578d08f07.tar.xz
Remove non-ascii & unprintable characters
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/amd/amdfam10/acpi.c2
-rw-r--r--src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c2
-rw-r--r--src/northbridge/intel/e7505/raminit.c4
-rw-r--r--src/northbridge/intel/gm45/pcie.c2
-rw-r--r--src/northbridge/intel/i82830/smihandler.c4
-rw-r--r--src/northbridge/intel/sandybridge/report_platform.c2
-rw-r--r--src/northbridge/via/vx900/early_host_bus_ctl.c4
-rw-r--r--src/northbridge/via/vx900/raminit_ddr3.c30
-rw-r--r--src/northbridge/via/vx900/sata.c6
9 files changed, 28 insertions, 28 deletions
diff --git a/src/northbridge/amd/amdfam10/acpi.c b/src/northbridge/amd/amdfam10/acpi.c
index 960d468eed..d4ad9a409d 100644
--- a/src/northbridge/amd/amdfam10/acpi.c
+++ b/src/northbridge/amd/amdfam10/acpi.c
@@ -129,7 +129,7 @@ static unsigned long acpi_fill_srat(unsigned long current)
static unsigned long acpi_fill_slit(unsigned long current)
{
- /* Implement SLIT algorithm in BKDG Rev. 3.62 § 2.3.6.1
+ /* Implement SLIT algorithm in BKDG Rev. 3.62 Section 2.3.6.1
* Fill the first 8 bytes with the node number,
* then fill the next num*num byte with the distance,
* Distance entries vary with topology; the local node
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c
index 2501410985..8974a08e6e 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c
@@ -1541,7 +1541,7 @@ static uint8_t TrainDQSRdWrPos_D_Fam15(struct MCTStatStruc *pMCTstat,
printk(BIOS_DEBUG, "+");
} else {
if (read_iter < 16)
- printk(BIOS_DEBUG, "°");
+ printk(BIOS_DEBUG, ":");
else
printk(BIOS_DEBUG, ".");
}
diff --git a/src/northbridge/intel/e7505/raminit.c b/src/northbridge/intel/e7505/raminit.c
index b48328f1b7..7734ca50d1 100644
--- a/src/northbridge/intel/e7505/raminit.c
+++ b/src/northbridge/intel/e7505/raminit.c
@@ -1007,10 +1007,10 @@ static inline void __attribute__((always_inline))
unsigned int a1, a2;
asm volatile("movd %%xmm2, %%eax;" : "=a" (a1) ::);
asm volatile("movd %%xmm3, %%eax;" : "=a" (a2) ::);
- printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2);
+ printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2);
asm volatile("movd %%xmm0, %%eax;" : "=a" (a1) ::);
asm volatile("movd %%xmm1, %%eax;" : "=a" (a2) ::);
- printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2);
+ printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2);
#endif
}
diff --git a/src/northbridge/intel/gm45/pcie.c b/src/northbridge/intel/gm45/pcie.c
index 30ceb364e6..cc1fde74f8 100644
--- a/src/northbridge/intel/gm45/pcie.c
+++ b/src/northbridge/intel/gm45/pcie.c
@@ -289,7 +289,7 @@ static void setup_aspm(const stepping_t stepping, const int peg_enabled)
* Maybe we just have to advertise ASPM through LCAP[11:10]
* (LCAP[17:15] == 010b is the default, will be locked, as it's R/WO),
* set 0x208[31:24,23:22] to zero, 0x224[24:21] = 1 and let the
- * generic ASPM code do the rest? – Nico
+ * generic ASPM code do the rest? - Nico
*/
/* TODO: Prepare PEG for ASPM. */
}
diff --git a/src/northbridge/intel/i82830/smihandler.c b/src/northbridge/intel/i82830/smihandler.c
index 12da69830e..667f874c42 100644
--- a/src/northbridge/intel/i82830/smihandler.c
+++ b/src/northbridge/intel/i82830/smihandler.c
@@ -166,11 +166,11 @@ static void mbi_call(u8 subf, banner_id_t *banner_id)
}
case 0x0002:
printk(BIOS_DEBUG, "|- MBI_Attach\n");
- printk(BIOS_DEBUG, "|  |- Not Implemented!\n");
+ printk(BIOS_DEBUG, "| |- Not Implemented!\n");
break;
case 0x0003:
printk(BIOS_DEBUG, "|- MBI_Detach\n");
- printk(BIOS_DEBUG, "|  |- Not Implemented!\n");
+ printk(BIOS_DEBUG, "| |- Not Implemented!\n");
break;
case 0x0201: {
obj_header_t *obj_header = (obj_header_t *)banner_id;
diff --git a/src/northbridge/intel/sandybridge/report_platform.c b/src/northbridge/intel/sandybridge/report_platform.c
index aa758c8626..39bff65b8b 100644
--- a/src/northbridge/intel/sandybridge/report_platform.c
+++ b/src/northbridge/intel/sandybridge/report_platform.c
@@ -62,7 +62,7 @@ static struct {
/* 6-series PCI ids from
* Intel® 6 Series Chipset and
* Intel® C200 Series Chipset
- * Specification Update – NDA
+ * Specification Update - NDA
* October 2013
* CDI / IBP#: 440377
*/
diff --git a/src/northbridge/via/vx900/early_host_bus_ctl.c b/src/northbridge/via/vx900/early_host_bus_ctl.c
index 64680c5e28..159b2a4273 100644
--- a/src/northbridge/via/vx900/early_host_bus_ctl.c
+++ b/src/northbridge/via/vx900/early_host_bus_ctl.c
@@ -20,9 +20,9 @@ static void vx900_cpu_bus_preram_setup(void)
{
/* Faster CPU to DRAM Cycle */
pci_mod_config8(HOST_BUS, 0x50, 0x0f, 0x08);
- /* CPU Interface Control – Basic Options */
+ /* CPU Interface Control - Basic Options */
pci_mod_config8(HOST_BUS, 0x51, 0, 0x6c);
- /*CPU Interface Control – Advanced Options */
+ /*CPU Interface Control - Advanced Options */
pci_write_config8(HOST_BUS, 0x52, 0xc7);
/* Enable 8QW burst and 4QW request merging [4] and [2]
* and special mode for read cycles bit[3] */
diff --git a/src/northbridge/via/vx900/raminit_ddr3.c b/src/northbridge/via/vx900/raminit_ddr3.c
index e0c557936d..f4b61de88b 100644
--- a/src/northbridge/via/vx900/raminit_ddr3.c
+++ b/src/northbridge/via/vx900/raminit_ddr3.c
@@ -186,14 +186,14 @@ static pci_reg8 mcu_drv_ctrl_config[] = {
{0xd4, 0x80}, /* Set internal ODT to dynamically turn on or off */
{0xd6, 0x20}, /* Enable strong driving for MA and DRAM commands */
{0xd0, 0x88}, /* (ODT) Strength ?has effect? */
- {0xe0, 0x88}, /* DRAM Driving – Group DQS (MDQS) */
+ {0xe0, 0x88}, /* DRAM Driving - Group DQS (MDQS) */
{0xe1, 0x00}, /* Disable offset mode for driving strength control */
- {0xe2, 0x88}, /* DRAM Driving – Group DQ (MD, MDQM) */
- {0xe4, 0xcc}, /* DRAM Driving – Group CSA (MCS, MCKE, MODT) */
- {0xe8, 0x88}, /* DRAM Driving – Group MA (MA, MBA, MSRAS, MSCAS, MSWE) */
- {0xe6, 0xff}, /* DRAM Driving – Group DCLK0 (DCLK[2:0] for DIMM0) */
- {0xe7, 0xff}, /* DRAM Driving – Group DCLK1 (DCLK[5:3] for DIMM1) */
- {0xe4, 0xcc}, /* DRAM Driving – Group CSA (MCS, MCKE, MODT) */
+ {0xe2, 0x88}, /* DRAM Driving - Group DQ (MD, MDQM) */
+ {0xe4, 0xcc}, /* DRAM Driving - Group CSA (MCS, MCKE, MODT) */
+ {0xe8, 0x88}, /* DRAM Driving - Group MA (MA, MBA, MSRAS, MSCAS, MSWE) */
+ {0xe6, 0xff}, /* DRAM Driving - Group DCLK0 (DCLK[2:0] for DIMM0) */
+ {0xe7, 0xff}, /* DRAM Driving - Group DCLK1 (DCLK[5:3] for DIMM1) */
+ {0xe4, 0xcc}, /* DRAM Driving - Group CSA (MCS, MCKE, MODT) */
{0x91, 0x08}, /* MCLKO Output Phase Delay - I */
{0x92, 0x08}, /* MCLKO Output Phase Delay - II */
{0x93, 0x16}, /* CS/CKE Output Phase Delay */
@@ -807,8 +807,8 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom,
/* Step 08 - Set Fun3_RX6B[2:0] to 011b (MSR Enable). */
pci_mod_config8(MCU, 0x6b, 0x07, 0x03); /* MSR Enable */
- /* Step 09 – Issue MR2 cycle. Read a double word from the address
- * depended on DRAM’s Rtt_WR and CWL settings. */
+ /* Step 09 - Issue MR2 cycle. Read a double word from the address
+ * depended on DRAM's Rtt_WR and CWL settings. */
mrs = ddr3_get_mr2(rtt_wr, srt, asr, cwl);
if (ma_swap)
mrs = ddr3_mrs_mirror_pins(mrs);
@@ -816,7 +816,7 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom,
printram("MR2: %.5x\n", mrs);
udelay(1000);
- /* Step 10 – Issue MR3 cycle. Read a double word from the address 60000h
+ /* Step 10 - Issue MR3 cycle. Read a double word from the address 60000h
* to set DRAM to normal operation mode. */
mrs = ddr3_get_mr3(0);
if (ma_swap)
@@ -825,8 +825,8 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom,
printram("MR3: %.5x\n", mrs);
udelay(1000);
- /* Step 11 –Issue MR1 cycle. Read a double word from the address
- * depended on DRAM’s output driver impedance and Rtt_Nom settings.
+ /* Step 11 -Issue MR1 cycle. Read a double word from the address
+ * depended on DRAM's output driver impedance and Rtt_Nom settings.
* The DLL enable field, TDQS field, write leveling enable field,
* additive latency field and Qoff field should be set to 0. */
mrs = ddr3_get_mr1(DDR3_MR1_QOFF_ENABLE, DDR3_MR1_TQDS_DISABLE, rtt_nom,
@@ -839,7 +839,7 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom,
udelay(1000);
/* Step 12 - Issue MR0 cycle. Read a double word from the address
- * depended on DRAM’s burst length, CAS latency and write recovery time
+ * depended on DRAM's burst length, CAS latency and write recovery time
* settings.
* The read burst type field should be set to interleave.
* The mode field should be set to normal mode.
@@ -942,13 +942,13 @@ static void vx900_dram_ddr3_dimm_init(const ramctr_timing * ctrl,
vx900_map_pr_vr(i, 3);
}
- /* Step 16 – Set Fun3_Rx6B[2:0] to 000b (Normal SDRAM Mode). */
+ /* Step 16 - Set Fun3_Rx6B[2:0] to 000b (Normal SDRAM Mode). */
pci_mod_config8(MCU, 0x6b, 0x07, 0x00);
/* Set BA[0/1/2] to [A13/14/15] */
vx900_dram_set_ma_pin_map(VX900_CALIB_MA_MAP);
- /* Step 17 – Set Fun3_Rx69[0] to 1b (Enable Multiple Page Mode). */
+ /* Step 17 - Set Fun3_Rx69[0] to 1b (Enable Multiple Page Mode). */
pci_mod_config8(MCU, 0x69, 0x00, (1 << 0));
printram("DIMM initialization sequence complete\n");
diff --git a/src/northbridge/via/vx900/sata.c b/src/northbridge/via/vx900/sata.c
index 98e4bd2f00..e0a54bdaee 100644
--- a/src/northbridge/via/vx900/sata.c
+++ b/src/northbridge/via/vx900/sata.c
@@ -199,7 +199,7 @@ static void vx900_sata_init(device_t dev)
/* Resend COMRESET When Recovering SATA Gen2 Device Error */
pci_mod_config8(dev, 0x62, 1 << 1, 1 << 7);
- /* Fix "PMP Device Can’t Detect HDD Normally" (VIA Porting Guide)
+ /* Fix "PMP Device Can't Detect HDD Normally" (VIA Porting Guide)
* SATA device detection will not work unless we clear these bits.
* Without doing this, SeaBIOS (and potentially other payloads) will
* timeout when detecting SATA devices */
@@ -211,8 +211,8 @@ static void vx900_sata_init(device_t dev)
* reset and check the BSY bit of one port only, and the BSY bit of
* other port would be 1, then it does another software reset
* immediately and causes the system hang.
- * This is because the first software reset doesn’t finish, and the
- * state machine of the host controller conflicts, it can’t finish the
+ * This is because the first software reset doesn't finish, and the
+ * state machine of the host controller conflicts, it can't finish the
* second one anymore. The BSY bit of slave port would be always 1 after
* the second software reset issues. BIOS should set the following
* bit to avoid this issue. */