summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
authorUwe Hermann <uwe@hermann-uwe.de>2010-10-26 22:46:43 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2010-10-26 22:46:43 +0000
commitb69cb5a31058c0295f2d810c852cc5b52d77225c (patch)
tree9f462e829279fbc1a892a70898ac2ee9da4c79e1 /src/northbridge
parentb907d321a5d0957f5cbb03d8f9c8d0ff0c23523b (diff)
downloadcoreboot-b69cb5a31058c0295f2d810c852cc5b52d77225c.tar.xz
Convert some comments to proper Doxygen syntax.
Also, make them all fit in 80chars/column, fix some whitespace issues and also some typos I noticed. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5993 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/amd/amdht/AsPsNb.c47
-rw-r--r--src/northbridge/intel/e7501/raminit.c478
-rw-r--r--src/northbridge/intel/e7520/raminit.c8
-rw-r--r--src/northbridge/intel/i3100/raminit_ep80579.c1
-rw-r--r--src/northbridge/intel/i855/raminit.c96
5 files changed, 286 insertions, 344 deletions
diff --git a/src/northbridge/amd/amdht/AsPsNb.c b/src/northbridge/amd/amdht/AsPsNb.c
index 52f8645e8d..7d7e463e0f 100644
--- a/src/northbridge/amd/amdht/AsPsNb.c
+++ b/src/northbridge/amd/amdht/AsPsNb.c
@@ -17,39 +17,23 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
-/*
- *----------------------------------------------------------------------------
- * MODULES USED
- *
- *----------------------------------------------------------------------------
- */
#undef FILECODE
#define FILECODE 0xCCCC
+
#include "comlib.h"
#include "AsPsDefs.h"
#include "AsPsNb.h"
-
-/*----------------------------------------------------------------------------
- * PROTOTYPES OF LOCAL FUNCTIONS
- *
- *----------------------------------------------------------------------------
- */
u8 getNumOfNodeNb(void);
u8 translateNodeIdToDeviceIdNb(u8 nodeId);
-
-/*----------------------------------------------------------------------------
- * FUNCTION: getMinNbCOF
- * INPUT: None
- * OUTPUT: minNbCOF (in multiple of half of CLKIN, 100MHz)
- * DESCRIPTION:
- * This function returns the minimum possible NbCOF (in 100MHz)
- * for the system .
- * This function can be run on any core and is used by the HT & Memory init code
- * in Phase 1.
- * ----------------------------------------------------------------------------
+/**
+ * Return the minimum possible NbCOF (in 100MHz) for the system.
+ *
+ * This function can be run on any core and is used by the HT & Memory init
+ * code in Phase 1.
+ *
+ * @return minNbCOF (in multiple of half of CLKIN, 100MHz).
*/
u8 getMinNbCOF(void)
{
@@ -130,14 +114,13 @@ u8 getNumOfNodeNb(void)
return (u8)dtemp;
}
-/*----------------------------------------------------------------------------
- * FUNCTION: translateNodeIdToDeviceId
- * INPUT: u8 nodeId - node ID of the node
- * OUTPUT: u8 - PCI device ID of the node
- * DESCRIPTION:
- * This function return the PCI device ID for PCI access using node ID.
- * This function may need to chnage node ID to device ID in big MP systems.
- * ----------------------------------------------------------------------------
+/**
+ * Return the PCI device ID for PCI access using node ID.
+ *
+ * This function may need to change node ID to device ID in big MP systems.
+ *
+ * @param nodeId Node ID of the node.
+ * @return PCI device ID of the node.
*/
u8 translateNodeIdToDeviceIdNb(u8 nodeId)
{
diff --git a/src/northbridge/intel/e7501/raminit.c b/src/northbridge/intel/e7501/raminit.c
index ac3bd41866..c049d9e5b3 100644
--- a/src/northbridge/intel/e7501/raminit.c
+++ b/src/northbridge/intel/e7501/raminit.c
@@ -17,6 +17,10 @@
#include <stdlib.h>
#include "e7501.h"
+/*-----------------------------------------------------------------------------
+Definitions:
+-----------------------------------------------------------------------------*/
+
// Uncomment this to enable run-time checking of DIMM parameters
// for dual-channel operation
// Unfortunately the code seems to chew up several K of space.
@@ -47,10 +51,6 @@ struct dimm_size {
unsigned long side2;
};
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
-/* DEFINITIONS */
-/**********************************************************************************/
-
static const uint32_t refresh_frequency[] = {
/* Relative frequency (array value) of each E7501 Refresh Mode Select
* (RMS) value (array index)
@@ -451,9 +451,10 @@ static const uint32_t maybe_pull_updown_offset_table[] = {
0x88888888, 0x88888888, 0x88888888, 0x88888888,
};
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
-/* TABLES */
-/**********************************************************************************/
+/*-----------------------------------------------------------------------------
+Delay functions:
+-----------------------------------------------------------------------------*/
+
#define SLOW_DOWN_IO inb(0x80)
//#define SLOW_DOWN_IO udelay(40);
@@ -477,27 +478,26 @@ static void do_delay(void)
#define EXTRA_DELAY DO_DELAY
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
-/* DELAY FUNCTIONS */
-/**********************************************************************************/
-
static void die_on_spd_error(int spd_return_value)
{
if (spd_return_value < 0)
die("Error reading SPD info\n");
}
-//----------------------------------------------------------------------------------
-// Function: sdram_spd_get_page_size
-// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate
-// Return Value: struct dimm_size - log2(page size) for each side of the DIMM.
-// Description: Calculate the page size for each physical bank of the DIMM:
-// log2(page size) = (# columns) + log2(data width)
-//
-// NOTE: page size is the total number of data bits in a row.
-//
-static struct dimm_size sdram_spd_get_page_size(uint16_t
- dimm_socket_address)
+/*-----------------------------------------------------------------------------
+Serial presence detect (SPD) functions:
+-----------------------------------------------------------------------------*/
+
+/**
+ * Calculate the page size for each physical bank of the DIMM:
+ * log2(page size) = (# columns) + log2(data width)
+ *
+ * NOTE: Page size is the total number of data bits in a row.
+ *
+ * @param dimm_socket_address SMBus address of DIMM socket to interrogate.
+ * @return log2(page size) for each side of the DIMM.
+ */
+static struct dimm_size sdram_spd_get_page_size(uint16_t dimm_socket_address)
{
uint16_t module_data_width;
int value;
@@ -554,13 +554,12 @@ static struct dimm_size sdram_spd_get_page_size(uint16_t
return pgsz; // Never reached
}
-//----------------------------------------------------------------------------------
-// Function: sdram_spd_get_width
-// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate
-// Return Value: dimm_size - width in bits of each DIMM side's DRAMs.
-// Description: Read the width in bits of each DIMM side's DRAMs via SPD.
-// (i.e. 4, 8, 16)
-//
+/**
+ * Read the width in bits of each DIMM side's DRAMs via SPD (i.e. 4, 8, 16).
+ *
+ * @param dimm_socket_address SMBus address of DIMM socket to interrogate.
+ * @return Width in bits of each DIMM side's DRAMs.
+ */
static struct dimm_size sdram_spd_get_width(uint16_t dimm_socket_address)
{
int value;
@@ -601,18 +600,19 @@ static struct dimm_size sdram_spd_get_width(uint16_t dimm_socket_address)
return width;
}
-//----------------------------------------------------------------------------------
-// Function: spd_get_dimm_size
-// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate
-// Return Value: dimm_size - log2(number of bits) for each side of the DIMM
-// Description: Calculate the log base 2 size in bits of both DIMM sides.
-// log2(# bits) = (# columns) + log2(data width) +
-// (# rows) + log2(banks per SDRAM)
-//
-// Note that it might be easier to use SPD byte 31 here, it has the
-// DIMM size as a multiple of 4MB. The way we do it now we can size
-// both sides of an asymmetric dimm.
-//
+/**
+ * Calculate the log base 2 size in bits of both DIMM sides.
+ *
+ * log2(# bits) = (# columns) + log2(data width) +
+ * (# rows) + log2(banks per SDRAM)
+ *
+ * Note that it might be easier to use SPD byte 31 here, it has the DIMM size
+ * as a multiple of 4MB. The way we do it now we can size both sides of an
+ * asymmetric DIMM.
+ *
+ * @param dimm_socket_address SMBus address of DIMM socket to interrogate.
+ * @return log2(number of bits) for each side of the DIMM.
+ */
static struct dimm_size spd_get_dimm_size(unsigned dimm_socket_address)
{
int value;
@@ -651,20 +651,21 @@ static struct dimm_size spd_get_dimm_size(unsigned dimm_socket_address)
}
#ifdef VALIDATE_DIMM_COMPATIBILITY
-//----------------------------------------------------------------------------------
-// Function: are_spd_values_equal
-// Parameters: spd_byte_number -
-// dimmN_address - SMBus addresses of DIMM sockets to interrogate
-// Return Value: 1 if both DIMM sockets report the same value for the specified
-// SPD parameter; 0 if the values differed or an error occurred.
-// Description: Determine whether two DIMMs have the same value for a SPD parameter.
-//
+
+/**
+ * Determine whether two DIMMs have the same value for an SPD parameter.
+ *
+ * @param spd_byte_number The SPD byte number to compare in both DIMMs.
+ * @param dimm0_address SMBus address of the 1st DIMM socket to interrogate.
+ * @param dimm1_address SMBus address of the 2nd DIMM socket to interrogate.
+ * @return 1 if both DIMM sockets report the same value for the specified
+ * SPD parameter, 0 if the values differed or an error occurred.
+ */
static uint8_t are_spd_values_equal(uint8_t spd_byte_number,
uint16_t dimm0_address,
uint16_t dimm1_address)
{
uint8_t bEqual = 0;
-
int dimm0_value = spd_read_byte(dimm0_address, spd_byte_number);
int dimm1_value = spd_read_byte(dimm1_address, spd_byte_number);
@@ -676,23 +677,24 @@ static uint8_t are_spd_values_equal(uint8_t spd_byte_number,
}
#endif
-//----------------------------------------------------------------------------------
-// Function: spd_get_supported_dimms
-// Parameters: ctrl - PCI addresses of memory controller functions, and
-// SMBus addresses of DIMM slots on the mainboard
-// Return Value: uint8_t - a bitmask indicating which of the possible sockets
-// for each channel was found to contain a compatible DIMM.
-// Bit 0 corresponds to the closest socket for channel 0,
-// Bit 1 to the next socket for channel 0,
-// ...
-// Bit MAX_DIMM_SOCKETS_PER_CHANNEL-1 to the last socket for channel 0,
-// Bit MAX_DIMM_SOCKETS_PER_CHANNEL is the closest socket for channel 1,
-// ...
-// Bit 2*MAX_DIMM_SOCKETS_PER_CHANNEL-1 is the last socket for channel 1
-// Description: Scan for compatible DIMMs.
-// The code in this module only supports dual-channel operation,
-// so we test that compatible DIMMs are paired.
-//
+/**
+ * Scan for compatible DIMMs.
+ *
+ * The code in this module only supports dual-channel operation, so we test
+ * that compatible DIMMs are paired.
+ *
+ * @param ctrl PCI addresses of memory controller functions, and SMBus
+ * addresses of DIMM slots on the mainboard.
+ * @return A bitmask indicating which of the possible sockets for each channel
+ * was found to contain a compatible DIMM.
+ * Bit 0 corresponds to the closest socket for channel 0
+ * Bit 1 to the next socket for channel 0
+ * ...
+ * Bit MAX_DIMM_SOCKETS_PER_CHANNEL-1 to the last socket for channel 0
+ * Bit MAX_DIMM_SOCKETS_PER_CHANNEL is the closest socket for channel 1
+ * ...
+ * Bit 2*MAX_DIMM_SOCKETS_PER_CHANNEL-1 is the last socket for channel 1
+ */
static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
{
int i;
@@ -828,25 +830,17 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
return dimm_mask;
}
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
-/* SPD (SERIAL PRESENCE DETECT) FUNCTIONS */
-/**********************************************************************************/
-
-//----------------------------------------------------------------------------------
-// Function: do_ram_command
-// Parameters:
-// command - specifies the command to be sent to the DIMMs:
-// RAM_COMMAND_NOP - No Operation
-// RAM_COMMAND_PRECHARGE - Precharge all banks
-// RAM_COMMAND_MRS - Load Mode Register
-// RAM_COMMAND_EMRS - Load Extended Mode Register
-// RAM_COMMAND_CBR - Auto Refresh ("CAS-before-RAS")
-// RAM_COMMAND_NORMAL - Normal operation
-// jedec_mode_bits - for mode register set & extended mode register set
-// commands, bits 0-12 contain the register value in JEDEC format.
-// Return Value: None
-// Description: Send the specified command to all DIMMs.
-//
+/*-----------------------------------------------------------------------------
+SDRAM configuration functions:
+-----------------------------------------------------------------------------*/
+
+/**
+ * Send the specified command to all DIMMs.
+ *
+ * @param command Specifies the command to be sent to the DIMMs.
+ * @param jedec_mode_bits For the MRS & EMRS commands, bits 0-12 contain the
+ * register value in JEDEC format.
+ */
static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits)
{
int i;
@@ -916,14 +910,15 @@ static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits)
}
}
-//----------------------------------------------------------------------------------
-// Function: set_ram_mode
-// Parameters: jedec_mode_bits - for mode register set & extended mode register set
-// commands, bits 0-12 contain the register value in JEDEC format.
-// Return Value: None
-// Description: Set the mode register of all DIMMs. The proper CAS# latency
-// setting is added to the mode bits specified by the caller.
-//
+/**
+ * Set the mode register of all DIMMs.
+ *
+ * The proper CAS# latency setting is added to the mode bits specified
+ * by the caller.
+ *
+ * @param jedec_mode_bits For the MRS & EMRS commands, bits 0-12 contain the
+ * register value in JEDEC format.
+ */
static void set_ram_mode(uint16_t jedec_mode_bits)
{
ASSERT(!(jedec_mode_bits & SDRAM_CAS_MASK));
@@ -948,22 +943,22 @@ static void set_ram_mode(uint16_t jedec_mode_bits)
do_ram_command(RAM_COMMAND_MRS, jedec_mode_bits);
}
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
-/* SDRAM CONFIGURATION FUNCTIONS */
-/**********************************************************************************/
-
-//----------------------------------------------------------------------------------
-// Function: configure_dimm_row_boundaries
-// Parameters:
-// dimm_log2_num_bits - log2(number of bits) for each side of the DIMM
-// total_dram_64M_multiple - total DRAM in the system (as a
-// multiple of 64 MB) for DIMMs < dimm_index
-// dimm_index - which DIMM pair is being processed
-// (0..MAX_DIMM_SOCKETS_PER_CHANNEL)
-// Return Value: New multiple of 64 MB total DRAM in the system
-// Description: Configure the E7501's DRAM Row Boundary registers for the memory
-// present in the specified DIMM.
-//
+/*-----------------------------------------------------------------------------
+DIMM-independant configuration functions:
+-----------------------------------------------------------------------------*/
+
+/**
+ * Configure the E7501's DRAM Row Boundary (DRB) registers for the memory
+ * present in the specified DIMM.
+ *
+ * @param dimm_log2_num_bits Specifies log2(number of bits) for each side of
+ * the DIMM.
+ * @param total_dram_64M_multiple Total DRAM in the system (as a multiple of
+ * 64 MB) for DIMMs < dimm_index.
+ * @param dimm_index Which DIMM pair is being processed
+ * (0..MAX_DIMM_SOCKETS_PER_CHANNEL).
+ * @return New multiple of 64 MB total DRAM in the system.
+ */
static uint8_t configure_dimm_row_boundaries(struct dimm_size dimm_log2_num_bits, uint8_t total_dram_64M_multiple, unsigned dimm_index)
{
int i;
@@ -1017,18 +1012,16 @@ static uint8_t configure_dimm_row_boundaries(struct dimm_size dimm_log2_num_bits
return total_dram_64M_multiple;
}
-//----------------------------------------------------------------------------------
-// Function: configure_e7501_ram_addresses
-// Parameters: ctrl - PCI addresses of memory controller functions, and
-// SMBus addresses of DIMM slots on the mainboard
-// dimm_mask - bitmask of populated DIMMs on the board - see
-// spd_get_supported_dimms()
-// Return Value: None
-// Description: Program the E7501's DRAM row boundary addresses and its Top Of
-// Low Memory (TOLM). If necessary, set up a remap window so we
-// don't waste DRAM that ordinarily would lie behind addresses
-// reserved for memory-mapped I/O.
-//
+/**
+ * Set the E7501's DRAM row boundary addresses & its Top Of Low Memory (TOLM).
+ *
+ * If necessary, set up a remap window so we don't waste DRAM that ordinarily
+ * would lie behind addresses reserved for memory-mapped I/O.
+ *
+ * @param ctrl PCI addresses of memory controller functions, and SMBus
+ * addresses of DIMM slots on the mainboard.
+ * @param dimm_mask Bitmask of populated DIMMs, see spd_get_supported_dimms().
+ */
static void configure_e7501_ram_addresses(const struct mem_controller
*ctrl, uint8_t dimm_mask)
{
@@ -1130,13 +1123,10 @@ static void configure_e7501_ram_addresses(const struct mem_controller
}
}
-//----------------------------------------------------------------------------------
-// Function: initialize_ecc
-// Parameters: None
-// Return Value: None
-// Description: If we're configured to use ECC, initialize the SDRAM and
-// clear the E7501's ECC error flags.
-//
+/**
+ * If we're configured to use ECC, initialize the SDRAM and clear the E7501's
+ * ECC error flags.
+ */
static void initialize_ecc(void)
{
uint32_t dram_controller_mode;
@@ -1177,17 +1167,15 @@ static void initialize_ecc(void)
}
-//----------------------------------------------------------------------------------
-// Function: configure_e7501_dram_timing
-// Parameters: ctrl - PCI addresses of memory controller functions, and
-// SMBus addresses of DIMM slots on the mainboard
-// dimm_mask - bitmask of populated DIMMs on the board - see
-// spd_get_supported_dimms()
-// Return Value: None
-// Description: Program the DRAM Timing register of the E7501 (except for CAS#
-// latency, which is assumed to have been programmed already), based
-// on the parameters of the various installed DIMMs.
-//
+/**
+ * Program the DRAM Timing register (DRT) of the E7501 (except for CAS#
+ * latency, which is assumed to have been programmed already), based on the
+ * parameters of the various installed DIMMs.
+ *
+ * @param ctrl PCI addresses of memory controller functions, and SMBus
+ * addresses of DIMM slots on the mainboard.
+ * @param dimm_mask Bitmask of populated DIMMs, see spd_get_supported_dimms().
+ */
static void configure_e7501_dram_timing(const struct mem_controller *ctrl,
uint8_t dimm_mask)
{
@@ -1314,16 +1302,14 @@ static void configure_e7501_dram_timing(const struct mem_controller *ctrl,
die(SPD_ERROR);
}
-//----------------------------------------------------------------------------------
-// Function: configure_e7501_cas_latency
-// Parameters: ctrl - PCI addresses of memory controller functions, and
-// SMBus addresses of DIMM slots on the mainboard
-// dimm_mask - bitmask of populated DIMMs on the board - see
-// spd_get_supported_dimms()
-// Return Value: None
-// Description: Determine the shortest CAS# latency that the E7501 and all DIMMs
-// have in common, and program the E7501 to use it.
-//
+/**
+ * Determine the shortest CAS# latency that the E7501 and all DIMMs have in
+ * common, and program the E7501 to use it.
+ *
+ * @param ctrl PCI addresses of memory controller functions, and SMBus
+ * addresses of DIMM slots on the mainboard.
+ * @param dimm_mask Bitmask of populated DIMMs, spd_get_supported_dimms().
+ */
static void configure_e7501_cas_latency(const struct mem_controller *ctrl,
uint8_t dimm_mask)
{
@@ -1471,17 +1457,15 @@ static void configure_e7501_cas_latency(const struct mem_controller *ctrl,
die(SPD_ERROR);
}
-//----------------------------------------------------------------------------------
-// Function: configure_e7501_dram_controller_mode
-// Parameters: ctrl - PCI addresses of memory controller functions, and
-// SMBus addresses of DIMM slots on the mainboard
-// dimm_mask - bitmask of populated DIMMs on the board - see
-// spd_get_supported_dimms()
-// Return Value: None
-// Description: Configure the refresh interval so that we refresh no more often
-// than required by the "most needy" DIMM. Also disable ECC if any
-// of the DIMMs don't support it.
-//
+/**
+ * Configure the refresh interval so that we refresh no more often than
+ * required by the "most needy" DIMM. Also disable ECC if any of the DIMMs
+ * don't support it.
+ *
+ * @param ctrl PCI addresses of memory controller functions, and SMBus
+ * addresses of DIMM slots on the mainboard.
+ * @param dimm_mask Bitmask of populated DIMMs, spd_get_supported_dimms().
+ */
static void configure_e7501_dram_controller_mode(const struct
mem_controller *ctrl,
uint8_t dimm_mask)
@@ -1579,18 +1563,16 @@ static void configure_e7501_dram_controller_mode(const struct
pci_write_config32(PCI_DEV(0, 0, 0), DRC, controller_mode);
}
-//----------------------------------------------------------------------------------
-// Function: configure_e7501_row_attributes
-// Parameters: ctrl - PCI addresses of memory controller functions, and
-// SMBus addresses of DIMM slots on the mainboard
-// dimm_mask - bitmask of populated DIMMs on the board - see
-// spd_get_supported_dimms()
-// Return Value: None
-// Description: Configure the E7501's DRAM Row Attributes (DRA) registers
-// based on DIMM parameters read via SPD. This tells the controller
-// the width of the SDRAM chips on each DIMM side (x4 or x8) and
-// the page size of each DIMM side (4, 8, 16, or 32 KB).
-//
+/**
+ * Configure the E7501's DRAM Row Attributes (DRA) registers based on DIMM
+ * parameters read via SPD. This tells the controller the width of the SDRAM
+ * chips on each DIMM side (x4 or x8) and the page size of each DIMM side
+ * (4, 8, 16, or 32 KB).
+ *
+ * @param ctrl PCI addresses of memory controller functions, and SMBus
+ * addresses of DIMM slots on the mainboard.
+ * @param dimm_mask Bitmask of populated DIMMs, spd_get_supported_dimms().
+ */
static void configure_e7501_row_attributes(const struct mem_controller
*ctrl, uint8_t dimm_mask)
{
@@ -1634,14 +1616,12 @@ static void configure_e7501_row_attributes(const struct mem_controller
pci_write_config32(PCI_DEV(0, 0, 0), DRA, row_attributes);
}
-//----------------------------------------------------------------------------------
-// Function: enable_e7501_clocks
-// Parameters: dimm_mask - bitmask of populated DIMMs on the board - see
-// spd_get_supported_dimms()
-// Return Value: None
-// Description: Enable clock signals for populated DIMM sockets and disable them
-// for unpopulated sockets (to reduce EMI).
-//
+/*
+ * Enable clock signals for populated DIMM sockets and disable them for
+ * unpopulated sockets (to reduce EMI).
+ *
+ * @param dimm_mask Bitmask of populated DIMMs, see spd_get_supported_dimms().
+ */
static void enable_e7501_clocks(uint8_t dimm_mask)
{
int i;
@@ -1660,17 +1640,11 @@ static void enable_e7501_clocks(uint8_t dimm_mask)
pci_write_config8(PCI_DEV(0, 0, 0), CKDIS, clock_disable);
}
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
-/* DIMM-DEDEPENDENT CONFIGURATION FUNCTIONS */
-/**********************************************************************************/
-
-//----------------------------------------------------------------------------------
-// Function: RAM_RESET_DDR_PTR
-// Parameters: ctrl - PCI addresses of memory controller functions, and
-// SMBus addresses of DIMM slots on the mainboard
-// Return Value: None
-// Description: DDR Receive FIFO RE-Sync (?)
-//
+/* DIMM-dedependent configuration functions */
+
+/**
+ * DDR Receive FIFO RE-Sync (?)
+ */
static void RAM_RESET_DDR_PTR(void)
{
uint8_t byte;
@@ -1683,17 +1657,15 @@ static void RAM_RESET_DDR_PTR(void)
pci_write_config8(PCI_DEV(0, 0, 0), 0x88, byte);
}
-//----------------------------------------------------------------------------------
-// Function: ram_set_d0f0_regs
-// Parameters: None
-// Return Value: None
-// Description: Set E7501 registers that are either independent of DIMM specifics,
-// or establish default settings that will be overridden when we
-// learn the specifics.
-// This sets PCI configuration registers to known good values based
-// on the table 'constant_register_values', which are a triple of
-// configuration register offset, mask, and bits to set.
-//
+/**
+ * Set E7501 registers that are either independent of DIMM specifics, or
+ * establish default settings that will be overridden when we learn the
+ * specifics.
+ *
+ * This sets PCI configuration registers to known good values based on the
+ * table 'constant_register_values', which are a triple of configuration
+ * register offset, mask, and bits to set.
+ */
static void ram_set_d0f0_regs(void)
{
int i;
@@ -1726,14 +1698,13 @@ static void ram_set_d0f0_regs(void)
}
}
-//----------------------------------------------------------------------------------
-// Function: write_8dwords
-// Parameters: src_addr
-// dst_addr
-// Return Value: None
-// Description: Copy 64 bytes from one location to another.
-//
-static void write_8dwords(const uint32_t * src_addr, uint32_t dst_addr)
+/**
+ * Copy 64 bytes from one location to another.
+ *
+ * @param src_addr TODO
+ * @param dst_addr TODO
+ */
+static void write_8dwords(const uint32_t *src_addr, uint32_t dst_addr)
{
int i;
for (i = 0; i < 8; i++) {
@@ -1743,17 +1714,16 @@ static void write_8dwords(const uint32_t * src_addr, uint32_t dst_addr)
}
}
-//----------------------------------------------------------------------------------
-// Function: ram_set_rcomp_regs
-// Parameters: None
-// Return Value: None
-// Description: Set the E7501's (undocumented) RCOMP registers.
-// Per the 855PM datasheet and IXP2800 HW Initialization Reference
-// Manual, RCOMP registers appear to affect drive strength,
-// pullup/pulldown offset, and slew rate of various signal groups.
-// Comments below are conjecture based on apparent similarity
-// between the E7501 and these two chips.
-//
+/**
+ * Set the E7501's (undocumented) RCOMP registers.
+ *
+ * Per the 855PM datasheet and IXP2800 HW Initialization Reference Manual,
+ * RCOMP registers appear to affect drive strength, pullup/pulldown offset,
+ * and slew rate of various signal groups.
+ *
+ * Comments below are conjecture based on apparent similarity between the
+ * E7501 and these two chips.
+ */
static void ram_set_rcomp_regs(void)
{
uint32_t dword;
@@ -1857,20 +1827,19 @@ static void ram_set_rcomp_regs(void)
}
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
-/* DIMM-INDEPENDENT CONFIGURATION FUNCTIONS */
-/**********************************************************************************/
-
-//----------------------------------------------------------------------------------
-// Function: sdram_enable
-// Parameters: controllers - not used
-// ctrl - PCI addresses of memory controller functions, and
-// SMBus addresses of DIMM slots on the mainboard
-// Return Value: None
-// Description: Go through the JEDEC initialization sequence for all DIMMs,
-// then enable refresh and initialize ECC and memory to zero.
-// Upon exit, SDRAM is up and running.
-//
+/*-----------------------------------------------------------------------------
+Public interface:
+-----------------------------------------------------------------------------*/
+
+/**
+ * Go through the JEDEC initialization sequence for all DIMMs, then enable
+ * refresh and initialize ECC and memory to zero. Upon exit, SDRAM is up
+ * and running.
+ *
+ * @param controllers Not used.
+ * @param ctrl PCI addresses of memory controller functions, and SMBus
+ * addresses of DIMM slots on the mainboard.
+ */
static void sdram_enable(int controllers,
const struct mem_controller *ctrl)
{
@@ -1975,16 +1944,14 @@ static void sdram_enable(int controllers,
DUMPNORTH();
}
-//----------------------------------------------------------------------------------
-// Function: sdram_set_spd_registers
-// Parameters: ctrl - PCI addresses of memory controller functions, and
-// SMBus addresses of DIMM slots on the mainboard
-// Return Value: None
-// Description: Configure SDRAM controller parameters that depend on
-// characteristics of the DIMMs installed in the system. These
-// characteristics are read from the DIMMs via the standard Serial
-// Presence Detect (SPD) interface.
-//
+/**
+ * Configure SDRAM controller parameters that depend on characteristics of the
+ * DIMMs installed in the system. These characteristics are read from the
+ * DIMMs via the standard Serial Presence Detect (SPD) interface.
+ *
+ * @param ctrl PCI addresses of memory controller functions, and SMBus
+ * addresses of DIMM slots on the mainboard.
+ */
static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
uint8_t dimm_mask;
@@ -2023,14 +1990,13 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
pci_write_config16(PCI_DEV(0, 0, 0), SKPD, dimm_mask);
}
-//----------------------------------------------------------------------------------
-// Function: sdram_set_registers
-// Parameters: ctrl - PCI addresses of memory controller functions, and
-// SMBus addresses of DIMM slots on the mainboard
-// Return Value: None
-// Description: Do basic ram setup that does NOT depend on serial presence detect
-// information (i.e. independent of DIMM specifics).
-//
+/**
+ * Do basic RAM setup that does NOT depend on serial presence detect
+ * information (i.e. independent of DIMM specifics).
+ *
+ * @param ctrl PCI addresses of memory controller functions, and SMBus
+ * addresses of DIMM slots on the mainboard.
+ */
static void sdram_set_registers(const struct mem_controller *ctrl)
{
RAM_DEBUG_MESSAGE("Northbridge prior to SDRAM init:\n");
@@ -2039,7 +2005,3 @@ static void sdram_set_registers(const struct mem_controller *ctrl)
ram_set_rcomp_regs();
ram_set_d0f0_regs();
}
-
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
-/* PUBLIC INTERFACE */
-/**********************************************************************************/
diff --git a/src/northbridge/intel/e7520/raminit.c b/src/northbridge/intel/e7520/raminit.c
index e9827c43b9..235ce44f2b 100644
--- a/src/northbridge/intel/e7520/raminit.c
+++ b/src/northbridge/intel/e7520/raminit.c
@@ -15,7 +15,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
*/
#include <cpu/x86/mtrr.h>
@@ -81,8 +80,6 @@ static void sdram_set_registers(const struct mem_controller *ctrl)
print_spew("done.\n");
}
-
-
struct dimm_size {
unsigned long side1;
unsigned long side2;
@@ -209,7 +206,6 @@ static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask)
return 0;
}
-
static unsigned int spd_detect_dimms(const struct mem_controller *ctrl)
{
unsigned dimm_mask;
@@ -236,7 +232,6 @@ static unsigned int spd_detect_dimms(const struct mem_controller *ctrl)
return dimm_mask;
}
-
static int spd_set_row_attributes(const struct mem_controller *ctrl,
long dimm_mask)
{
@@ -296,7 +291,6 @@ hw_err:
}
-
static int spd_set_drt_attributes(const struct mem_controller *ctrl,
long dimm_mask, uint32_t drc)
{
@@ -798,6 +792,7 @@ static void set_on_dimm_termination_enable(const struct mem_controller *ctrl)
}
}
}
+
static void set_receive_enable(const struct mem_controller *ctrl)
{
unsigned int i;
@@ -1030,7 +1025,6 @@ static void set_receive_enable(const struct mem_controller *ctrl)
write32(BAR+0x154, recenb);
}
-
static void sdram_enable(int controllers, const struct mem_controller *ctrl)
{
int i;
diff --git a/src/northbridge/intel/i3100/raminit_ep80579.c b/src/northbridge/intel/i3100/raminit_ep80579.c
index 7aeef29c84..8967594b53 100644
--- a/src/northbridge/intel/i3100/raminit_ep80579.c
+++ b/src/northbridge/intel/i3100/raminit_ep80579.c
@@ -16,7 +16,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
*/
#include <cpu/x86/mtrr.h>
diff --git a/src/northbridge/intel/i855/raminit.c b/src/northbridge/intel/i855/raminit.c
index 539d161640..1120853fe5 100644
--- a/src/northbridge/intel/i855/raminit.c
+++ b/src/northbridge/intel/i855/raminit.c
@@ -25,6 +25,10 @@
#include <delay.h>
#include "i855.h"
+/*-----------------------------------------------------------------------------
+Macros and definitions:
+-----------------------------------------------------------------------------*/
+
#define VALIDATE_DIMM_COMPATIBILITY
/* Debugging macros. */
@@ -65,10 +69,6 @@ struct dimm_size {
unsigned int side2;
};
-/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
-/* DEFINITIONS */
-/**********************************************************************************/
-
static const uint32_t refresh_frequency[] = {
/* Relative frequency (array value) of each E7501 Refresh Mode Select
* (RMS) value (array index)
@@ -104,7 +104,7 @@ static const uint32_t refresh_rate_map[] = {
#define MAX_SPD_REFRESH_RATE ((sizeof(refresh_rate_map) / sizeof(uint32_t)) - 1)
/*-----------------------------------------------------------------------------
-SPD functions.
+SPD functions:
-----------------------------------------------------------------------------*/
static void die_on_spd_error(int spd_return_value)
@@ -117,15 +117,16 @@ static void die_on_spd_error(int spd_return_value)
*/
}
-//----------------------------------------------------------------------------------
-// Function: sdram_spd_get_page_size
-// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate
-// Return Value: struct dimm_size - log2(page size) for each side of the DIMM.
-// Description: Calculate the page size for each physical bank of the DIMM:
-// log2(page size) = (# columns) + log2(data width)
-//
-// NOTE: page size is the total number of data bits in a row.
-//
+/**
+ * Calculate the page size for each physical bank of the DIMM:
+ *
+ * log2(page size) = (# columns) + log2(data width)
+ *
+ * NOTE: Page size is the total number of data bits in a row.
+ *
+ * @param dimm_socket_address SMBus address of DIMM socket to interrogate.
+ * @return log2(page size) for each side of the DIMM.
+ */
static struct dimm_size sdram_spd_get_page_size(uint16_t dimm_socket_address)
{
uint16_t module_data_width;
@@ -180,13 +181,12 @@ static struct dimm_size sdram_spd_get_page_size(uint16_t dimm_socket_address)
return pgsz;
}
-//----------------------------------------------------------------------------------
-// Function: sdram_spd_get_width
-// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate
-// Return Value: dimm_size - width in bits of each DIMM side's DRAMs.
-// Description: Read the width in bits of each DIMM side's DRAMs via SPD.
-// (i.e. 4, 8, 16)
-//
+/**
+ * Read the width in bits of each DIMM side's DRAMs via SPD (i.e. 4, 8, 16).
+ *
+ * @param dimm_socket_address SMBus address of DIMM socket to interrogate.
+ * @return Width in bits of each DIMM side's DRAMs.
+ */
static struct dimm_size sdram_spd_get_width(uint16_t dimm_socket_address)
{
int value;
@@ -225,18 +225,19 @@ static struct dimm_size sdram_spd_get_width(uint16_t dimm_socket_address)
return width;
}
-//----------------------------------------------------------------------------------
-// Function: spd_get_dimm_size
-// Parameters: dimm_socket_address - SMBus address of DIMM socket to interrogate
-// Return Value: dimm_size - log2(number of bits) for each side of the DIMM
-// Description: Calculate the log base 2 size in bits of both DIMM sides.
-// log2(# bits) = (# columns) + log2(data width) +
-// (# rows) + log2(banks per SDRAM)
-//
-// Note that it might be easier to use SPD byte 31 here, it has the
-// DIMM size as a multiple of 4MB. The way we do it now we can size
-// both sides of an asymmetric dimm.
-//
+/**
+ * Calculate the log base 2 size in bits of both DIMM sides.
+ *
+ * log2(# bits) = (# columns) + log2(data width) +
+ * (# rows) + log2(banks per SDRAM)
+ *
+ * Note that it might be easier to use SPD byte 31 here, it has the DIMM size
+ * as a multiple of 4MB. The way we do it now we can size both sides of an
+ * asymmetric DIMM.
+ *
+ * @param dimm SMBus address of DIMM socket to interrogate.
+ * @return log2(number of bits) for each side of the DIMM.
+ */
static struct dimm_size spd_get_dimm_size(unsigned dimm)
{
int value;
@@ -270,13 +271,13 @@ static struct dimm_size spd_get_dimm_size(unsigned dimm)
return sz;
}
-//----------------------------------------------------------------------------------
-// Function: spd_get_supported_dimms
-// Parameters: ctrl - PCI addresses of memory controller functions, and
-// SMBus addresses of DIMM slots on the mainboard
-// Return Value: uint8_t - a bitmask indicating which sockets contain a compatible DIMM.
-// Description: Scan for compatible DIMMs.
-//
+/**
+ * Scan for compatible DIMMs.
+ *
+ * @param ctrl PCI addresses of memory controller functions, and SMBus
+ * addresses of DIMM slots on the mainboard.
+ * @return A bitmask indicating which sockets contain a compatible DIMM.
+ */
static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
{
int i;
@@ -356,8 +357,9 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
}
/*-----------------------------------------------------------------------------
-DIMM-initialization functions.
+SDRAM configuration functions:
-----------------------------------------------------------------------------*/
+
static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits)
{
int i;
@@ -487,14 +489,16 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
}
/*-----------------------------------------------------------------------------
-DIMM-independant configuration functions.
+DIMM-independant configuration functions:
-----------------------------------------------------------------------------*/
/**
- * Set only what I need until it works, then make it figure things out on boot
- * assumes only one dimm is populated
- */
-
+ * Set only what I need until it works, then make it figure things out on boot
+ * assumes only one DIMM is populated.
+ *
+ * @param ctrl PCI addresses of memory controller functions, and SMBus
+ * addresses of DIMM slots on the mainboard.
+ */
static void sdram_set_registers(const struct mem_controller *ctrl)
{
/*