adding 855pm

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1629 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

8 files changed, 2445 insertions, 0 deletions

diff --git a/src/northbridge/intel/855pm/855pm.h b/src/northbridge/intel/855pm/855pm.h
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/src/northbridge/intel/855pm/855pm.h
diff --git a/src/northbridge/intel/855pm/Config.lb b/src/northbridge/intel/855pm/Config.lb
new file mode 100644
index 0000000000..f101a921fd
--- /dev/null
+++ b/src/northbridge/intel/855pm/Config.lb
@@ -0,0 +1,4 @@
+config chip.h
+object northbridge.o
+#driver misc_control.o
+
diff --git a/src/northbridge/intel/855pm/chip.h b/src/northbridge/intel/855pm/chip.h
new file mode 100644
index 0000000000..468982833c
--- /dev/null
+++ b/src/northbridge/intel/855pm/chip.h
@@ -0,0 +1,5 @@
+struct northbridge_intel_855pm_config
+{
+};
+
+extern struct chip_control northbridge_intel_855pm_control;
diff --git a/src/northbridge/intel/855pm/debug.c b/src/northbridge/intel/855pm/debug.c
new file mode 100644
index 0000000000..67670f9844
--- /dev/null
+++ b/src/northbridge/intel/855pm/debug.c
@@ -0,0 +1,164 @@
+/*
+ * generic K8 debug code, used by mainboard specific auto.c
+ *
+ */
+#if 1
+static void print_debug_pci_dev(unsigned dev)
+{
+	print_debug("PCI: ");
+	print_debug_hex8((dev >> 16) & 0xff);
+	print_debug_char(':');
+	print_debug_hex8((dev >> 11) & 0x1f);
+	print_debug_char('.');
+	print_debug_hex8((dev >> 8) & 7);
+}
+
+static void print_pci_devices(void)
+{
+	device_t dev;
+	for(dev = PCI_DEV(0, 0, 0); 
+		dev <= PCI_DEV(0, 0x1f, 0x7); 
+		dev += PCI_DEV(0,0,1)) {
+		uint32_t id;
+		id = pci_read_config32(dev, PCI_VENDOR_ID);
+		if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0x0000)) {
+			continue;
+		}
+		print_debug_pci_dev(dev);
+		print_debug("\r\n");
+	}
+}
+
+static void dump_pci_device(unsigned dev)
+{
+	int i;
+	print_debug_pci_dev(dev);
+	print_debug("\r\n");
+	
+	for(i = 0; i <= 255; i++) {
+		unsigned char val;
+		if ((i & 0x0f) == 0) {
+			print_debug_hex8(i);
+			print_debug_char(':');
+		}
+		val = pci_read_config8(dev, i);
+		print_debug_char(' ');
+		print_debug_hex8(val);
+		if ((i & 0x0f) == 0x0f) {
+			print_debug("\r\n");
+		}
+	}
+}
+
+static void dump_pci_devices(void)
+{
+	device_t dev;
+	for(dev = PCI_DEV(0, 0, 0); 
+		dev <= PCI_DEV(0, 0x1f, 0x7); 
+		dev += PCI_DEV(0,0,1)) {
+		uint32_t id;
+		id = pci_read_config32(dev, PCI_VENDOR_ID);
+		if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0x0000)) {
+			continue;
+		}
+		dump_pci_device(dev);
+	}
+}
+
+static void dump_spd_registers(const struct mem_controller *ctrl)
+{
+	int i;
+	print_debug("\r\n");
+	for(i = 0; i < 4; i++) {
+		unsigned device;
+		device = ctrl->channel0[i];
+		if (device) {
+			int j;
+			print_debug("dimm: "); 
+			print_debug_hex8(i); 
+			print_debug(".0: ");
+			print_debug_hex8(device);
+			for(j = 0; j < 256; j++) {
+				int status;
+				unsigned char byte;
+				if ((j & 0xf) == 0) {
+					print_debug("\r\n");
+					print_debug_hex8(j);
+					print_debug(": ");
+				}
+				status = smbus_read_byte(device, j);
+				if (status < 0) {
+					print_debug("bad device\r\n");
+					break;
+				}
+				byte = status & 0xff;
+				print_debug_hex8(byte);
+				print_debug_char(' ');
+			}
+			print_debug("\r\n");
+		}
+#if 0
+		device = ctrl->channel1[i];
+		if (device) {
+			int j;
+			print_debug("dimm: "); 
+			print_debug_hex8(i); 
+			print_debug(".1: ");
+			print_debug_hex8(device);
+			for(j = 0; j < 256; j++) {
+				int status;
+				unsigned char byte;
+				if ((j & 0xf) == 0) {
+					print_debug("\r\n");
+					print_debug_hex8(j);
+					print_debug(": ");
+				}
+				status = smbus_read_byte(device, j);
+				if (status < 0) {
+					print_debug("bad device\r\n");
+					break;
+				}
+				byte = status & 0xff;
+				print_debug_hex8(byte);
+				print_debug_char(' ');
+			}
+			print_debug("\r\n");
+		}
+#endif
+	}
+}
+static void dump_smbus_registers(void)
+{
+        int i;
+        print_debug("\r\n");
+        for(i = 1; i < 0x80; i++) {
+                unsigned device;
+                device = i;
+                int j;
+                print_debug("smbus: ");
+                print_debug_hex8(device);
+                for(j = 0; j < 256; j++) {
+                	int status; 
+                        unsigned char byte;
+                        if ((j & 0xf) == 0) {
+                	        print_debug("\r\n");
+                                print_debug_hex8(j);
+                                print_debug(": ");
+                        }
+                        status = smbus_read_byte(device, j);
+                        if (status < 0) {
+                                print_debug("bad device\r\n");
+                                break;
+                        }
+                        byte = status & 0xff;
+                        print_debug_hex8(byte);
+                        print_debug_char(' ');
+                }
+                print_debug("\r\n");
+	}	
+}
+#endif
diff --git a/src/northbridge/intel/855pm/northbridge.c b/src/northbridge/intel/855pm/northbridge.c
new file mode 100644
index 0000000000..d4f73df3d2
--- /dev/null
+++ b/src/northbridge/intel/855pm/northbridge.c
@@ -0,0 +1,151 @@
+#include <console/console.h>
+#include <arch/io.h>
+#include <stdint.h>
+#include <mem.h>
+#include <part/sizeram.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/chip.h>
+#include <stdlib.h>
+#include <string.h>
+#include <bitops.h>
+#include "chip.h"
+
+struct mem_range *sizeram(void)
+{
+	static struct mem_range mem[4];
+	/* the units of tolm are 64 KB */
+	/* the units of drb16 are 64 MB */
+	uint16_t tolm, remapbase, remaplimit, drb16;
+	uint16_t tolm_r, remapbase_r, remaplimit_r;
+	uint8_t  drb;
+	int remap_high;
+        device_t dev;
+
+        dev = dev_find_slot(0, 0); // d0f0
+	if (!dev) {
+                printk_err("Cannot find PCI: 0:0\n");
+                return 0;
+        }
+	
+	/* Calculate and report the top of low memory and 
+	 * any remapping.
+	 */
+	/* Test if the remap memory high option is set */
+        remap_high = 0;
+//        if(get_option(&remap_high, "remap_memory_high")){
+//                remap_high = 0;
+//        }
+	printk_debug("remap_high is %d\n", remap_high);
+	/* get out the value of the highest DRB. This tells the end of 
+	 * physical memory. The units are ticks of 64 MB i.e. 1 means
+	 * 64 MB. 
+	 */
+	drb = pci_read_config8(dev, 0x67);
+	drb16 = (uint16_t)drb;
+	if(remap_high && (drb16 > 0x08)) {
+		/* We only come here if we have at least 512MB of memory,
+		 * so it is safe to hard code tolm.
+		 * 0x2000 means 512MB 
+		 */
+
+		tolm = 0x2000;
+		/* i.e 0x40 * 0x40 is 0x1000 which is 4 GB */
+		if(drb16 > 0x0040) {
+			/* There is more than 4GB of memory put
+			 * the remap window at the end of ram.
+			 */
+			remapbase = drb16;
+			remaplimit = remapbase + 0x38;
+		}
+		else {
+			remapbase = 0x0040;
+			remaplimit = remapbase + (drb16-8);
+		}
+	}
+	else {
+		tolm = (uint16_t)((dev_root.resource[1].base >> 16)&0x0f800);
+		if((tolm>>8) >= (drb16<<2)) {
+			tolm = (drb16<<10);
+			remapbase = 0x3ff;
+			remaplimit = 0;
+		}
+		else {
+			remapbase = drb16;
+			remaplimit = remapbase + ((0x0040-(tolm>>10))-1);
+		}
+	}
+	/* Write the ram configruation registers,
+	 * preserving the reserved bits.
+	 */
+	tolm_r = pci_read_config16(dev, 0xc4);
+	tolm |= (tolm_r & 0x7ff); 
+	pci_write_config16(dev, 0xc4, tolm);
+	remapbase_r = pci_read_config16(dev, 0xc6);
+	remapbase |= (remapbase_r & 0xfc00);
+	pci_write_config16(dev, 0xc6, remapbase);
+	remaplimit_r = pci_read_config16(dev, 0xc8);
+	remaplimit |= (remaplimit_r & 0xfc00);
+	pci_write_config16(dev, 0xc8, remaplimit);
+
+#if 0
+    printk_debug("mem info tolm = %x, drb = %x, pci_memory_base = %x, remap = %x-%x\n",tolm,drb,pci_memory_base,remapbase,remaplimit);
+#endif
+	
+	mem[0].basek = 0;
+	mem[0].sizek = 640;
+	mem[1].basek = 768;
+	/* Convert size in 64K bytes to size in K bytes */
+	mem[1].sizek = (tolm << 6) - mem[1].basek;
+	mem[2].basek = 0;
+	mem[2].sizek = 0;
+	if ((drb << 16) > (tolm << 6)) {
+		/* We don't need to consider the remap window
+		 * here because we put it immediately after the
+		 * rest of ram.
+		 * All we must do is calculate the amount
+		 * of unused memory and report it at 4GB.
+		 */
+		mem[2].basek = 4096*1024;
+		mem[2].sizek = (drb << 16) - (tolm << 6);
+	}
+	mem[3].basek = 0;
+	mem[3].sizek = 0;
+	
+	return mem;
+}
+static void enumerate(struct chip *chip)
+{
+        extern struct device_operations default_pci_ops_bus;
+        chip_enumerate(chip);
+        chip->dev->ops = &default_pci_ops_bus;
+}
+#if 0
+static void northbridge_init(struct chip *chip, enum chip_pass pass)
+{
+
+        struct northbridge_intel_855pm_config *conf =
+                (struct northbridge_intel_855pm_config *)chip->chip_info;
+
+        switch (pass) {
+        case CONF_PASS_PRE_PCI:
+                break;
+
+        case CONF_PASS_POST_PCI:
+                break;
+
+        case CONF_PASS_PRE_BOOT:
+                break;
+
+        default:
+                /* nothing yet */
+                break;
+        }
+}
+#endif
+
+struct chip_control northbridge_intel_855pm_control = {
+        .enumerate = enumerate,
+//        .enable    = northbridge_init,
+        .name      = "intel E7501 Northbridge",
+};
diff --git a/src/northbridge/intel/855pm/raminit.c b/src/northbridge/intel/855pm/raminit.c
new file mode 100644
index 0000000000..a4845d8b58
--- /dev/null
+++ b/src/northbridge/intel/855pm/raminit.c
@@ -0,0 +1,2091 @@
+
+/* This was originally for the e7500, modified for 855pm
+ */
+
+/* converted to C 6/2004 yhlu */
+
+#define DEBUG_RAM_CONFIG 0
+
+#define dumpnorth() dump_pci_device(PCI_DEV(0, 0, 0)) 
+
+/* DDR DIMM Mode register Definitions */
+
+#define BURST_2           (1<<0)
+#define BURST_4           (2<<0)
+#define BURST_8           (3<<0)
+
+#define BURST_SEQUENTIAL  (0<<3)
+#define BURST_INTERLEAVED (1<<3)
+
+#define CAS_2_0	          (0x2<<4)
+#define CAS_3_0           (0x3<<4)
+#define CAS_1_5           (0x5<<4)
+#define CAS_2_5           (0x6<<4)
+
+#define MODE_NORM         (0 << 7)
+#define MODE_DLL_RESET    (2 << 7)
+#define MODE_TEST         (1 << 7)
+
+#define BURST_LENGTH BURST_4
+#define BURST_TYPE   BURST_INTERLEAVED
+#define CAS_LATENCY  CAS_2_0
+//#define CAS_LATENCY  CAS_2_5
+//#define CAS_LATENCY  CAS_1_5
+
+#define MRS_VALUE (MODE_NORM | CAS_LATENCY | BURST_TYPE | BURST_LENGTH)
+#define EMRS_VALUE 0x000
+
+#define MD_SHIFT 4
+
+#define RAM_COMMAND_NONE	0x0
+#define RAM_COMMAND_NOP		0x1
+#define RAM_COMMAND_PRECHARGE	0x2
+#define RAM_COMMAND_MRS		0x3
+#define RAM_COMMAND_EMRS	0x4
+#define RAM_COMMAND_CBR		0x6
+#define RAM_COMMAND_NORMAL	0x7
+
+
+static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t value) {
+        uint32_t dword;
+        uint8_t byte;
+        int i;
+        uint32_t result;
+#if DEBUG_RAM_CONFIG >= 2
+        print_debug("P:");
+        print_debug_hex8(value);
+        print_debug("\r\n");
+#endif
+        /* %ecx - initial address to read from */
+        /* Compute the offset */
+        dword = value >> 16;
+        for(i=0;i<8;i++) {
+                /* Set the ram command */
+                byte = pci_read_config8(ctrl->d0, 0x7c);
+                byte &= 0x8f;
+                byte |= (uint8_t)(value & 0xff);
+                pci_write_config8(ctrl->d0, 0x7c, byte);
+
+                /* Assert the command to the memory */
+#if DEBUG_RAM_CONFIG  >= 2
+                print_debug("R:");
+                print_debug_hex32(dword);
+                print_debug("\r\n");
+#endif
+
+                result = read32(dword);
+
+                /* Go to the next base address */
+                dword += 0x04000000;
+
+        } 
+
+        /* The command has been sent to all dimms so get out */
+}
+
+
+static inline void RAM_CMD(const struct mem_controller *ctrl, uint32_t command, uint32_t offset)  {
+	uint32_t value = 	((offset) << (MD_SHIFT + 16))|((command << 4) & 0x70) ; 
+	do_ram_command(ctrl, value);
+}
+	
+#define RAM_NOP(ctrl)		RAM_CMD(ctrl, RAM_COMMAND_NOP, 0)
+#define RAM_PRECHARGE(ctrl)		RAM_CMD(ctrl, RAM_COMMAND_PRECHARGE, 0)
+#define RAM_CBR(ctrl)		RAM_CMD(ctrl, RAM_COMMAND_CBR, 0)
+#define RAM_EMRS(ctrl)		RAM_CMD(ctrl, RAM_COMMAND_EMRS, EMRS_VALUE)
+
+static const uint8_t ram_cas_latency[] = {
+	CAS_2_5, CAS_2_0, CAS_1_5, CAS_2_5
+	};
+
+static inline void ram_mrs(const struct mem_controller *ctrl, uint32_t value){
+	/* Read the cas latency setting */
+	uint8_t byte;
+	uint32_t dword;
+	byte = pci_read_config8(ctrl->d0, 0x78); 
+	/* Transform it into the form expected by SDRAM */
+	dword = ram_cas_latency[(byte>>4) & 3];
+
+	value  |= (dword<<(16+MD_SHIFT));
+	
+	value |= (MODE_NORM | BURST_TYPE | BURST_LENGTH) << (16+MD_SHIFT);
+
+	do_ram_command(ctrl, value);
+}
+
+#define RAM_MRS(ctrl, dll_reset) ram_mrs( ctrl, (dll_reset << (8+MD_SHIFT+ 16)) | ((RAM_COMMAND_MRS <<4)& 0x70) )
+
+static void RAM_NORMAL(const struct mem_controller *ctrl) {
+	uint8_t byte;
+	byte = pci_read_config8(ctrl->d0, 0x7c);
+	byte &=  0x8f;
+	byte |= (RAM_COMMAND_NORMAL << 4);
+	pci_write_config8(ctrl->d0, 0x7c, byte);
+}
+
+static void  RAM_RESET_DDR_PTR(const struct mem_controller *ctrl) {
+	uint8_t byte;
+	byte = pci_read_config8(ctrl->d0, 0x88);
+	byte |= (1 << 4 );
+	pci_write_config8(ctrl->d0, 0x88, byte);
+	byte = pci_read_config8(ctrl->d0, 0x88);
+	byte &= ~(1 << 4);
+	pci_write_config8(ctrl->d0, 0x88, byte);
+}
+
+static void ENABLE_REFRESH(const struct mem_controller *ctrl) 
+{
+	uint32_t dword;
+	dword = pci_read_config32(ctrl->d0, 0x7c);
+	dword |= (1 << 29);
+	pci_write_config32(ctrl->d0, 0x7c, dword);
+}
+
+	/*
+	 * Table:	constant_register_values
+	 */
+static const long register_values[] = {
+	/* SVID - Subsystem Vendor Identification Register
+	 * 0x2c - 0x2d
+	 * [15:00] Subsytem Vendor ID (Indicates system board vendor)
+	 */
+	/* SID - Subsystem Identification Register
+	 * 0x2e - 0x2f
+	 * [15:00] Subsystem ID
+	 */
+	 0x2c, 0, (0x15d9 << 0) | (0x3580 << 16),
+
+	/* Undocumented
+	 * 0x80 - 0x80
+	 * This register has something to do with CAS latencies,
+	 * possibily this is the real chipset control.
+	 * At 0x00 CAS latency 1.5 works.
+	 * At 0x06 CAS latency 2.5 works.
+	 * At 0x01 CAS latency 2.0 works.
+	 */
+	/* This is still undocumented in e7501, but with different values
+	 * CAS 2.0 values taken from Intel BIOS settings, others are a guess
+	 * and may be terribly wrong. Old values preserved as comments until I
+	 * figure this out for sure.
+	 * e7501 docs claim that CAS1.5 is unsupported, so it may or may not 
+	 * work at all.
+	 * Steven James 02/06/2003
+	 */
+#if CAS_LATENCY == CAS_2_5
+//	0x80, 0xfffffe00, 0x06 /* Intel E7500 recommended */
+	0x80, 0xfffff000, 0x0662, /* from Factory Bios */
+#elif CAS_LATENCY == CAS_2_0
+//	0x80, 0xfffffe00, 0x0d /* values for register 0x80 */
+	0x80, 0xfffff000, 0x0bb1, /* values for register 0x80 */
+#endif
+
+	/* Enable periodic memory recalibration */
+	0x88, 0xffffff00, 0x80,
+
+	/* FDHC - Fixed DRAM Hole Control
+	 * 0x58
+	 * [7:7] Hole_Enable
+	 *       0 == No memory Hole
+	 *       1 == Memory Hole from 15MB to 16MB
+	 * [6:0] Reserved
+	 *
+	 * PAM - Programmable Attribute Map
+	 * 0x59 [1:0] Reserved
+	 * 0x59 [5:4] 0xF0000 - 0xFFFFF
+	 * 0x5A [1:0] 0xC0000 - 0xC3FFF
+	 * 0x5A [5:4] 0xC4000 - 0xC7FFF
+	 * 0x5B [1:0] 0xC8000 - 0xCBFFF
+	 * 0x5B [5:4] 0xCC000 - 0xCFFFF
+	 * 0x5C [1:0] 0xD0000 - 0xD3FFF
+	 * 0x5C [5:4] 0xD4000 - 0xD7FFF
+	 * 0x5D [1:0] 0xD8000 - 0xDBFFF
+	 * 0x5D [5:4] 0xDC000 - 0xDFFFF
+	 * 0x5E [1:0] 0xE0000 - 0xE3FFF
+	 * 0x5E [5:4] 0xE4000 - 0xE7FFF
+	 * 0x5F [1:0] 0xE8000 - 0xEBFFF
+	 * 0x5F [5:4] 0xEC000 - 0xEFFFF
+	 *       00 == DRAM Disabled (All Access go to memory mapped I/O space)
+	 *       01 == Read Only (Reads to DRAM, Writes to memory mapped I/O space)
+	 *       10 == Write Only (Writes to DRAM, Reads to memory mapped I/O space)
+	 *       11 == Normal (All Access go to DRAM)
+	 */
+	0x58, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24),
+	0x5C, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24),
+
+	/* DRB - DRAM Row Boundary Registers
+	 * 0x60 - 0x6F
+	 *     An array of 8 byte registers, which hold the ending
+	 *     memory address assigned  to each pair of DIMMS, in 64MB 
+	 *     granularity.   
+	 */
+	/* Conservatively say each row has 64MB of ram, we will fix this up later */
+	0x60, 0x00000000, (0x01 << 0) | (0x02 << 8) | (0x03 << 16) | (0x04 << 24),
+	0x64, 0x00000000, (0x05 << 0) | (0x06 << 8) | (0x07 << 16) | (0x08 << 24),
+	0x68, 0xffffffff, 0,
+	0x6C, 0xffffffff, 0,
+
+	/* DRA - DRAM Row Attribute Register 
+	 * 0x70 Row 0,1
+	 * 0x71 Row 2,3
+ 	 * 0x72 Row 4,5
+	 * 0x73 Row 6,7
+	 * [7:7] Device width for Odd numbered rows
+	 *       0 == 8 bits wide x8
+	 *       1 == 4 bits wide x4
+	 * [6:4] Row Attributes for Odd numbered rows
+	 *       010 == 8KB
+	 *       011 == 16KB
+	 *       100 == 32KB
+	 *       101 == 64KB
+	 *       Others == Reserved
+	 * [3:3] Device width for Even numbered rows
+	 *       0 == 8 bits wide x8
+	 *       1 == 4 bits wide x4
+	 * [2:0] Row Attributes for Even numbered rows
+	 *       010 == 8KB
+	 *       011 == 16KB
+	 *       100 == 32KB
+	 *       101 == 64KB (This page size appears broken)
+	 *       Others == Reserved
+	 */
+	0x70, 0x00000000, 
+		(((0<<3)|(0<<0))<< 0) | 
+		(((0<<3)|(0<<0))<< 4) | 
+		(((0<<3)|(0<<0))<< 8) | 
+		(((0<<3)|(0<<0))<<12) | 
+		(((0<<3)|(0<<0))<<16) | 
+		(((0<<3)|(0<<0))<<20) | 
+		(((0<<3)|(0<<0))<<24) | 
+		(((0<<3)|(0<<0))<<28),
+	0x74, 0xffffffff, 0,
+
+	/* DRT - DRAM Time Register
+	 * 0x78
+	 * [31:30] Reserved
+	 * [29:29] Back to Back Write-Read Turn Around
+	 *         0 == 3 clocks between WR-RD commands
+	 *         1 == 2 clocks between WR-RD commands
+	 * [28:28] Back to Back Read-Write Turn Around
+	 *         0 == 5 clocks between RD-WR commands
+	 *         1 == 4 clocks between RD-WR commands
+	 * [27:27] Back to Back Read Turn Around
+	 *         0 == 4 clocks between RD commands
+	 *         1 == 3 clocks between RD commands
+	 * [26:24] Read Delay (tRD)
+	 *         000 == 7 clocks
+	 *         001 == 6 clocks
+	 *         010 == 5 clocks
+	 *         Others == Reserved
+	 * [23:19] Reserved
+	 * [18:16] DRAM idle timer
+	 *	000 == infinite
+	 *	011 == 16 dram clocks
+	 *	001 == Datasheet says reserved, but Intel BIOS sets it
+	 * [15:11] Reserved
+	 * [10:09] Active to Precharge (tRAS)
+	 *         00 == 7 clocks
+	 *         01 == 6 clocks
+	 *         10 == 5 clocks
+	 *         11 == Reserved
+	 * [08:06] Reserved
+	 * [05:04] Cas Latency (tCL)
+	 *         00 == 2.5 Clocks
+	 *         01 == 2.0 Clocks
+	 *         10 == 1.5 Clocks
+	 *         11 == Reserved
+	 * [03:03] Write Ras# to Cas# Delay (tRCD)
+	 *         0 == 3 DRAM Clocks
+	 *         1 == 2 DRAM Clocks
+ 	 * [02:01] Read RAS# to CAS# Delay (tRCD)
+ 	 *         00 == reserved
+ 	 *         01 == reserved
+	 *         10 == 3 DRAM Clocks
+	 *         11 == 2 DRAM Clocks
+	 * [00:00] DRAM RAS# to Precharge (tRP)
+	 *         0 == 3 DRAM Clocks
+	 *         1 == 2 DRAM Clocks
+	 */
+#define DRT_CAS_2_5 (0<<4)
+#define DRT_CAS_2_0 (1<<4)   
+#define DRT_CAS_1_5 (2<<4)
+#define DRT_CAS_MASK (3<<4)
+
+#if CAS_LATENCY == CAS_2_5
+#define DRT_CL DRT_CAS_2_5
+#elif CAS_LATENCY == CAS_2_0
+#define DRT_CL DRT_CAS_2_0
+#elif CAS_LATENCY == CAS_1_5
+#define DRT_CL DRT_CAS_1_5
+#endif
+
+	/* Most aggressive settings possible */
+//	0x78, 0xc0fff8c4, (1<<29)|(1<<28)|(1<<27)|(2<<24)|(2<<9)|DRT_CL|(1<<3)|(1<<1)|(1<<0),
+//	0x78, 0xc0f8f8c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|DRT_CL|(1<<3)|(3<<1)|(1<<0),
+	0x78, 0xc0f8f9c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|DRT_CL|(1<<3)|(3<<1)|(1<<0),
+
+	/* FIXME why was I attempting to set a reserved bit? */
+	/* 0x0100040f */
+
+	/* DRC - DRAM Contoller Mode Register
+	 * 0x7c
+	 * [31:30] Reserved
+	 * [29:29] Initialization Complete
+	 *         0 == Not Complete
+	 *         1 == Complete
+	 * [28:23] Reserved
+	 * [22:22]	   Channels
+	 * 		0 == Single channel
+	 *		1 == Dual Channel
+	 * [21:20] DRAM Data Integrity Mode
+	 *         00 == Disabled, no ECC
+	 *         01 == Reserved
+	 *         10 == Error checking, using chip-kill, with correction
+	 *         11 == Reserved
+	 * [19:18] Reserved
+	 *         Must equal 01
+	 * [17:17] (Intel Undocumented)	should always be set to 1
+	 * [16:16] Command Per Clock - Address/Control Assertion Rule (CPC)
+	 *         0 == 2n Rule
+	 *         1 == 1n rule
+	 * [15:11] Reserved
+	 * [10:08] Refresh mode select
+	 *         000 == Refresh disabled
+	 *         001 == Refresh interval 15.6 usec
+	 *         010 == Refresh interval 7.8 usec
+	 *         011 == Refresh interval 64 usec
+	 *         111 == Refresh every 64 clocks (fast refresh)
+	 * [07:07] Reserved
+	 * [06:04] Mode Select (SMS)
+	 *         000 == Self Refresh Mode
+	 *         001 == NOP Command
+	 *         010 == All Banks Precharge
+	 *         011 == Mode Register Set
+ 	 *         100 == Extended Mode Register Set
+	 *         101 == Reserved
+	 *         110 == CBR Refresh
+	 *         111 == Normal Operation
+	 * [03:00] Reserved
+	 */
+//	.long 0x7c, 0xffcefcff, (1<<22)|(2 << 20)|(1 << 16)| (0 << 8),
+//	.long 0x7c, 0xff8cfcff, (1<<22)|(2 << 20)|(1 << 17)|(1 << 16)| (0 << 8),
+//	.long 0x7c, 0xff80fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 17)|(1 << 16)| (0 << 8),
+	0x7c, 0xff82fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 16)| (0 << 8),
+
+
+	/* Another Intel undocumented register */
+	0x88, 0x080007ff, (1<<31)|(1 << 30)|(1<<28)|(0 << 26)|(0x10 << 21)|(10 << 16)|(0x13 << 11),
+
+	/* CLOCK_DIS - CK/CK# Disable Register
+	 * 0x8C
+	 * [7:4] Reserved
+	 * [3:3] CK3
+	 *       0 == Enable
+	 *       1 == Disable
+	 * [2:2] CK2
+	 *       0 == Enable
+	 *       1 == Disable
+	 * [1:1] CK1
+	 *       0 == Enable
+	 *       1 == Disable
+	 * [0:0] CK0
+	 *       0 == Enable
+	 *       1 == Disable
+	 */
+	0x8C, 0xfffffff0, 0xf,
+
+	/* TOLM - Top of Low Memory Register
+	 * 0xC4 - 0xC5
+	 * [15:11] Top of low memory (TOLM)
+	 *         The address below 4GB that should be treated as RAM,
+	 *         on a 128MB granularity.
+	 * [10:00] Reserved
+	 */
+	/* REMAPBASE - Remap Base Address Regsiter
+	 * 0xC6 - 0xC7
+	 * [15:10] Reserved
+	 * [09:00] Remap Base Address [35:26] 64M aligned
+	 *         Bits [25:0] are assumed to be 0.
+	 */
+	0xc4, 0xfc0007ff, (0x2000 << 0) | (0x3ff << 16),
+	/* REMAPLIMIT - Remap Limit Address Register
+	 * 0xC8 - 0xC9
+	 * [15:10] Reserved
+	 * [09:00] Remap Limit Address [35:26] 64M aligned
+	 * When remaplimit < remapbase this register is disabled.
+	 */
+	0xc8, 0xfffffc00, 0,
+
+	/* DVNP - Device Not Present Register
+	 * 0xE0 - 0xE1
+	 * [15:05] Reserved
+ 	 * [04:04] Device 4 Function 1 Present
+	 *         0 == Present
+	 *         1 == Absent
+ 	 * [03:03] Device 3 Function 1 Present
+	 *         0 == Present
+	 *         1 == Absent
+ 	 * [02:02] Device 2 Function 1 Present
+	 *         0 == Present
+	 *         1 == Absent
+ 	 * [01:01] Reserved
+ 	 * [00:00] Device 0 Function 1 Present
+	 *         0 == Present
+	 *         1 == Absent
+	 */
+	0xe0, 0xffffffe2, (1<<4)|(1<<3)|(1<<2)|(0<<0),
+	0xd8, 0xffff9fff, 0x00000000,
+	0xf4, 0x3f8ffffd, 0x40300002,
+	0x1050, 0xffffffcf, 0x00000030,
+};
+
+
+	/*
+	 * Routine:	ram_set_registers
+	 * Arguments:	none
+	 * Results:	none
+	 * Trashed:	%eax, %ebx, %ecx, %edx, %esi, %eflags
+	 * Effects:	Do basic ram setup that does not depend on serial
+	 *		presence detect information.
+	 *		This sets PCI configuration registers to known good
+	 *		values based on the table: 
+	 *			constant_register_values
+	 *		Which are a triple of configuration regiser, mask, and value.
+	 *		
+	 */
+/* from 1M or 512K */
+#define RCOMP_MMIO 0x100000
+
+	/* DDR RECOMP table */
+
+static const long ddr_rcomp_1[] = {
+	0x44332211, 0xc9776655, 0xffffffff, 0xffffffff,
+	0x22111111, 0x55444332, 0xfffca876, 0xffffffff,
+};
+static const long ddr_rcomp_2[] = {
+	0x00000000, 0x76543210, 0xffffeca8, 0xffffffff,
+	0x21000000, 0xa8765432, 0xffffffec, 0xffffffff,
+};
+static const long ddr_rcomp_3[] = {
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0x88888888, 0x88888888, 0x88888888, 0x88888888,
+};
+
+#define rcomp_init_str "Setting RCOMP registers.\r\n"
+
+static void write_8dwords(uint32_t src_addr, uint32_t dst_addr) {
+	int i;
+	uint32_t dword;
+	for(i=0;i<8;i++) {
+		dword = read32(src_addr);
+		write32(dst_addr, dword);
+		src_addr+=4;
+		dst_addr+=4;
+		
+	}
+}
+
+//#define SLOW_DOWN_IO inb(0x80);
+#define SLOW_DOWN_IO udelay(40);
+
+static void ram_set_rcomp_regs(const struct mem_controller *ctrl) {
+	uint32_t dword;
+#if DEBUG_RAM_CONFIG
+	print_debug(rcomp_init_str);
+#endif
+
+	/*enable access to the rcomp bar */
+	dword = pci_read_config32(ctrl->d0, 0x0f4);
+        dword &= ~(1<<31);
+        dword |=((1<<30)|1<<22);
+        pci_write_config32(ctrl->d0, 0x0f4, dword);
+        
+
+	/* Set the MMIO address to 512K */
+        pci_write_config32(ctrl->d0, 0x14, RCOMP_MMIO);
+
+	dword = read32(RCOMP_MMIO + 0x20);
+	dword |= (1<<9);
+	write32(RCOMP_MMIO + 0x20, dword);
+	
+
+	/* Begin to write the RCOMP registers */
+	
+	write8(RCOMP_MMIO + 0x2c, 0xff);
+	write32(RCOMP_MMIO + 0x30, 0x01040444);
+	write8(RCOMP_MMIO + 0x34, 0x04);
+	write32(RCOMP_MMIO + 0x40, 0);
+	write16(RCOMP_MMIO + 0x44, 0);
+	write16(RCOMP_MMIO + 0x48, 0);
+	write16(RCOMP_MMIO + 0x50, 0);
+	write_8dwords((uint32_t)ddr_rcomp_1, RCOMP_MMIO + 0x60);
+	write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x80);
+	write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0xa0);
+	write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x140);
+	write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x1c0);
+	write_8dwords((uint32_t)ddr_rcomp_3, RCOMP_MMIO + 0x180);
+
+#if 0	/* Print the RCOMP registers */
+	movl    $RCOMP_MMIO, %ecx
+1:	movl	%ecx, %eax
+	andb	$0x0f, %al
+	jnz	2f
+	CONSOLE_INFO_TX_CHAR($'\r')
+        CONSOLE_INFO_TX_CHAR($'\n')
+	CONSOLE_INFO_TX_HEX32(%ecx)
+	CONSOLE_INFO_TX_CHAR($' ')
+	CONSOLE_INFO_TX_CHAR($'-')
+	CONSOLE_INFO_TX_CHAR($' ')
+2:	movl    (%ecx), %eax
+	CONSOLE_INFO_TX_HEX32(%eax)
+	CONSOLE_INFO_TX_CHAR($' ')
+	addl	$4, %ecx
+	cmpl	$(RCOMP_MMIO + 0x1e0), %ecx
+	jnz	1b
+        CONSOLE_INFO_TX_CHAR($'\r')
+        CONSOLE_INFO_TX_CHAR($'\n')
+#endif
+
+	dword = read32(RCOMP_MMIO + 0x20);
+	dword &= ~(3);
+	dword |= 1;
+	write32(RCOMP_MMIO + 0x20, dword);
+
+	/* Wait 40 usec */
+	SLOW_DOWN_IO;
+	
+	/* unblock updates */
+	dword = read32(RCOMP_MMIO + 0x20);
+	dword &= ~(1<<9);
+	write32(RCOMP_MMIO+0x20, dword);
+	dword |= (1<<8);
+	write32(RCOMP_MMIO+0x20, dword);
+	dword &= ~(1<<8);
+	write32(RCOMP_MMIO+0x20, dword);
+	
+	/* Wait 40 usec */
+	SLOW_DOWN_IO;
+
+	/*disable access to the rcomp bar */
+	dword = pci_read_config32(ctrl->d0, 0x0f4);
+	dword &= ~(1<<22);
+	pci_write_config32(ctrl->d0, 0x0f4, dword);	
+
+}
+
+static void ram_set_d0f0_regs(const struct mem_controller *ctrl) {
+#if DEBUG_RAM_CONFIG
+	dumpnorth();
+#endif
+	int i;
+	int max;
+        max = sizeof(register_values)/sizeof(register_values[0]);
+        for(i = 0; i < max; i += 3) {
+                uint32_t reg;
+#if DEBUG_RAM_CONFIG
+                print_debug_hex32(register_values[i]);
+                print_debug(" <-");
+                print_debug_hex32(register_values[i+2]);
+                print_debug("\r\n");
+#endif
+                reg = pci_read_config32(ctrl->d0,register_values[i]);
+                reg &= register_values[i+1];
+                reg |= register_values[i+2] & ~(register_values[i+1]);
+                pci_write_config32(ctrl->d0,register_values[i], reg);
+
+
+        }
+#if DEBUG_RAM_CONFIG
+	dumpnorth();
+#endif
+}
+static void sdram_set_registers(const struct mem_controller *ctrl){
+        ram_set_rcomp_regs(ctrl);
+        ram_set_d0f0_regs(ctrl);
+}
+
+
+	/*
+	 * Routine:	sdram_spd_get_page_size
+	 * Arguments:	%bl SMBUS_MEM_DEVICE
+	 * Results:	
+	 *		%edi log base 2 page size of DIMM side 1 in bits
+	 *		%esi log base 2 page size of DIMM side 2 in bits
+	 *
+	 * Preserved:	%ebx (except %bh), %ebp
+	 *
+	 * Trashed:	%eax, %bh, %ecx, %edx, %esp, %eflags
+	 * Used:	%eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
+	 *
+	 * Effects:	Uses serial presence detect to set %edi & %esi
+	 *		to the page size of a dimm.
+	 * Notes:
+	 *              %bl SMBUS_MEM_DEVICE
+	 *              %edi holds the page size for the first side of the DIMM.
+	 *		%esi holds the page size for the second side of the DIMM.
+	 *		     memory size is represent as a power of 2.
+	 *
+	 *		This routine may be worth moving into generic code somewhere.
+	 */
+struct dimm_page_size { 
+        unsigned long side1;
+        unsigned long side2;
+};      
+  
+static struct dimm_page_size sdram_spd_get_page_size(unsigned device) {
+
+	uint32_t ecx;
+	int value;
+	struct dimm_page_size pgsz;
+
+	pgsz.side1 = 0;
+	pgsz.side2 = 0;	
+		
+	value  = spd_read_byte(device, 4); /* columns */
+	if(value < 0) goto hw_err;
+	pgsz.side1 = value & 0xf;
+	
+	/* Get the module data width and convert it to a power of two */
+	value = spd_read_byte(device,7);		/* (high byte) */
+	if(value < 0) goto hw_err;
+	ecx = value & 0xff;
+	ecx <<= 8;
+
+	value = spd_read_byte(device, 6);	 /* (low byte) */
+	if(value < 0) goto hw_err;
+	ecx |= (value & 0xff);
+
+	pgsz.side1 += log2(ecx);	 /* compute cheap log base 2 */	
+
+	/* side two */
+	value = spd_read_byte(device, 5);	/* number of physical banks */
+	if(value < 0) goto hw_err;
+	if(value==1) goto out;
+	if(value!=2) goto val_err;
+
+	/* Start with the symmetrical case */
+	pgsz.side2 = pgsz.side1;
+	value = spd_read_byte(device,4);   /* columns */
+	if(value < 0) goto hw_err;
+	if((value & 0xf0)==0 ) goto out;
+	pgsz.side2 -=value & 0xf; /* Subtract out columns on side 1 */
+	pgsz.side2 +=(value>>4)& 0xf; /* Add in columns on side 2 */
+        goto out;
+
+ val_err:
+        die("Bad SPD value\r\n");
+        /* If an hw_error occurs report that I have no memory */
+hw_err:
+	pgsz.side1 = 0;
+	pgsz.side2 = 0;
+out:
+	return pgsz;	
+}
+
+
+	/*
+	 * Routine:	sdram_spd_get_width
+	 * Arguments:	%bl SMBUS_MEM_DEVICE
+	 * Results:	
+	 *		%edi width of SDRAM chips on DIMM side 1 in bits
+	 *		%esi width of SDRAM chips on DIMM side 2 in bits
+	 *
+	 * Preserved:	%ebx (except %bh), %ebp
+	 *
+	 * Trashed:	%eax, %bh, %ecx, %edx, %esp, %eflags
+	 * Used:	%eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
+	 *
+	 * Effects:	Uses serial presence detect to set %edi & %esi
+	 *		to the width of a dimm.
+	 * Notes:
+	 *              %bl SMBUS_MEM_DEVICE
+	 *              %edi holds the width for the first side of the DIMM.
+	 *		%esi holds the width for the second side of the DIMM.
+	 *		     memory size is represent as a power of 2.
+	 *
+	 *		This routine may be worth moving into generic code somewhere.
+	 */
+struct dimm_width {
+        unsigned side1;
+        unsigned side2;
+};      
+  
+static struct dimm_width sdram_spd_get_width(unsigned device) {
+	int value;
+	struct dimm_width wd;
+	uint32_t ecx;
+	
+	wd.side1 = 0;
+	wd.side2 = 0;
+
+	value = spd_read_byte(device, 13); /* sdram width */
+	if(value < 0 )  goto hw_err;
+	ecx = value;
+	
+	wd.side1 = value & 0x7f;	
+	
+	/* side two */
+	value = spd_read_byte(device, 5); /* number of physical banks */
+	if(value < 0 ) goto hw_err;	
+	if(value <=1 ) goto out;
+
+	/* Start with the symmetrical case */
+	wd.side2 = wd.side1;
+
+	if((ecx & 0x80)==0) goto out;
+	
+	wd.side2 <<=1;
+hw_err:
+	wd.side1 = 0;
+	wd.side2 = 0;
+
+ out:
+        return wd;
+}
+	
+	/*
+	 * Routine:	sdram_spd_get_dimm_size
+	 * Arguments:	%bl SMBUS_MEM_DEVICE
+	 * Results:	
+	 *		%edi log base 2 size of DIMM side 1 in bits
+	 *		%esi log base 2 size of DIMM side 2 in bits
+	 *
+	 * Preserved:	%ebx (except %bh), %ebp
+	 *
+	 * Trashed:	%eax, %bh, %ecx, %edx, %esp, %eflags
+	 * Used:	%eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
+	 *
+	 * Effects:	Uses serial presence detect to set %edi & %esi
+	 *		the size of a dimm.
+	 * Notes:
+	 *              %bl SMBUS_MEM_DEVICE
+	 *              %edi holds the memory size for the first side of the DIMM.
+	 *		%esi holds the memory size for the second side of the DIMM.
+	 *		     memory size is represent as a power of 2.
+	 *
+	 *		This routine may be worth moving into generic code somewhere.
+	 */
+
+struct dimm_size {
+        unsigned long side1;
+        unsigned long side2;
+};
+
+static struct dimm_size spd_get_dimm_size(unsigned device)
+{
+        /* Calculate the log base 2 size of a DIMM in bits */
+        struct dimm_size sz;
+        int value, low;
+        sz.side1 = 0;
+        sz.side2 = 0;
+
+        /* Note it might be easier to use byte 31 here, it has the DIMM size as
+         * a multiple of 4MB.  The way we do it now we can size both
+         * sides of an assymetric dimm.
+         */
+        value = spd_read_byte(device, 3);       /* rows */
+        if (value < 0) goto hw_err;
+//        if ((value & 0xf) == 0) goto val_err;
+        sz.side1 += value & 0xf;
+
+        value = spd_read_byte(device, 4);       /* columns */
+        if (value < 0) goto hw_err;
+//        if ((value & 0xf) == 0) goto val_err;
+        sz.side1 += value & 0xf;
+
+        value = spd_read_byte(device, 17);      /* banks */
+        if (value < 0) goto hw_err;
+//        if ((value & 0xff) == 0) goto val_err;
+	value &=0xff;
+        sz.side1 += log2(value);
+
+        /* Get the module data width and convert it to a power of two */
+        value = spd_read_byte(device, 7);       /* (high byte) */
+        if (value < 0) goto hw_err;
+        value &= 0xff;
+        value <<= 8;
+        
+        low = spd_read_byte(device, 6); /* (low byte) */
+        if (low < 0) goto hw_err;
+        value |= (low & 0xff);
+//        if ((value != 72) && (value != 64)) goto val_err;
+        sz.side1 += log2(value);
+        
+        /* side 2 */
+        value = spd_read_byte(device, 5);       /* number of physical banks */
+        if (value < 0) goto hw_err;
+        if (value == 1) goto out;
+//        if (value != 2) goto val_err;
+
+        /* Start with the symmetrical case */
+        sz.side2 = sz.side1;
+
+        value = spd_read_byte(device, 3);       /* rows */
+        if (value < 0) goto hw_err;
+        if ((value & 0xf0) == 0) goto out;      /* If symmetrical we are done */
+        sz.side2 -= (value & 0x0f);             /* Subtract out rows on side 1 */
+        sz.side2 += ((value >> 4) & 0x0f);      /* Add in rows on side 2 */
+
+        value = spd_read_byte(device, 4);       /* columns */
+        if (value < 0) goto hw_err;
+//        if ((value & 0xff) == 0) goto val_err;
+        sz.side2 -= (value & 0x0f);             /* Subtract out columns on side 1 */
+        sz.side2 += ((value >> 4) & 0x0f);      /* Add in columsn on side 2 */
+        goto out;
+
+ val_err:
+        die("Bad SPD value\r\n");
+        /* If an hw_error occurs report that I have no memory */
+hw_err:
+        sz.side1 = 0;
+        sz.side2 = 0;
+ out:
+        return sz;
+}
+
+
+
+	/*
+	 * This is a place holder fill this out
+	 * Routine:	spd_set_row_attributes 
+	 * Arguments:	%bl SMBUS_MEM_DEVICE
+	 * Results:	
+	 *		%edi log base 2 size of DIMM side 1 in bits
+	 *		%esi log base 2 size of DIMM side 2 in bits
+	 *
+	 * Preserved:	%ebx (except %bh), %ebp
+	 *
+	 * Trashed:	%eax, %bh, %ecx, %edx, %esp, %eflags
+	 * Used:	%eax, %ebx, %ecx, %edx, %esi, %edi, %esp, %eflags
+	 *
+	 * Effects:	Uses serial presence detect to set %edi & %esi
+	 *		the size of a dimm.
+	 * Notes:
+	 *              %bl SMBUS_MEM_DEVICE
+	 *              %edi holds the memory size for the first side of the DIMM.
+	 *		%esi holds the memory size for the second side of the DIMM.
+	 *		     memory size is represent as a power of 2.
+	 *
+	 *		This routine may be worth moving into generic code somewhere.
+	 */
+static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_mask) {
+	int i;  
+        uint32_t dword=0;
+        int value;
+        
+
+        /* Walk through all dimms and find the interesection of the support
+         * for ecc sdram and refresh rates
+         */        
+        
+ 
+        for(i = 0; i < DIMM_SOCKETS; i++) {
+		if (!(dimm_mask & (1 << i))) {
+                        continue;
+                }
+                 /* Test to see if I have ecc sdram */
+		struct dimm_page_size sz;
+                sz = sdram_spd_get_page_size(ctrl->channel0[i]);  /* SDRAM type */
+#if DEBUG_RAM_CONFIG
+		print_debug("page size =");
+		print_debug_hex32(sz.side1);
+		print_debug(" ");
+		print_debug_hex32(sz.side2);
+		print_debug("\r\n");
+#endif
+	
+		/* Test to see if the dimm is present */
+		if( sz.side1 !=0) {
+
+			/* Test for a valid dimm width */
+			if((sz.side1 <15) || (sz.side1>18) ) {
+				print_err("unsupported page size\r\n");
+			}
+
+	 		/* double because I have 2 channels */
+			sz.side1++;
+
+			/* Convert to the format needed for the DRA register */
+			sz.side1-=14;	
+
+			/* Place in the %ebp the dra place holder */ //i
+			dword |= sz.side1<<(i<<3);
+			
+			/* Test to see if the second side is present */
+
+	                if( sz.side2 !=0) {
+        
+	                        /* Test for a valid dimm width */
+        	                if((sz.side2 <15) || (sz.side2>18) ) {
+                	                print_err("unsupported page size\r\n");
+                        	}
+
+                        	/* double because I have 2 channels */
+                        	sz.side2++;
+
+                        	/* Convert to the format needed for the DRA register */
+                        	sz.side2-=14;
+
+	                        /* Place in the %ebp the dra place holder */ //i
+        	                dword |= sz.side2<<((i<<3) + 4 );
+
+			}
+		}
+
+		/* Now add the SDRAM chip width to the DRA */
+		struct dimm_width wd;
+		wd = sdram_spd_get_width(ctrl->channel0[i]);
+
+#if DEBUG_RAM_CONFIG
+                print_debug("width =");
+                print_debug_hex32(wd.side1);
+                print_debug(" ");
+                print_debug_hex32(wd.side2);
+                print_debug("\r\n");
+#endif
+		
+		if(wd.side1 == 0) continue;
+		if(wd.side1 == 4) {
+			/* Enable an x4 device */
+			dword |= 0x08 << (i<<3);
+		}
+
+		if(wd.side2 == 0) continue;
+                if(wd.side2 == 4) {
+                        /* Enable an x4 device */
+                        dword |= 0x08 << ((i<<3 ) + 4);
+                }
+		
+	/* go to the next DIMM */
+	}
+
+	/* Write the new row attributes register */
+	pci_write_config32(ctrl->d0, 0x70, dword);
+
+	return dimm_mask;
+
+}
+#if 0
+	/*
+	 * Routine:	sdram_read_paired_byte
+	 * Arguments:	%esp return address
+	 *		%bl device on the smbus to read from
+	 *              %bh address on the smbus to read
+	 * Results:	
+	 *		zf clear
+	 *		byte read in %al
+	 *	On Error:
+	 *		zf set
+	 *		%eax trashed
+	 *
+	 * Preserved:	%ebx, %esi, %edi
+	 *
+	 * Trashed:	%eax, %ecx, %edx, %ebp, %esp, %eflags
+	 * Used:	%eax, %ebx, %ecx, %edx, %esp, %eflags
+	 *
+	 * Effects:	Reads two spd bytes from both ram channesl
+	 *              and errors if they are not equal.
+	 *		It then returns the equal result.
+	 */
+static spd_read_paired_byte () {
+	movl	%esp, %ebp
+	CALLSP(smbus_read_byte)
+	setnz	%cl
+	movb	%al, %ch
+	addb	$(SMBUS_MEM_CHANNEL_OFF), %bl
+	CALLSP(smbus_read_byte)
+	movb	%ch, %ah
+	setnz	%ch
+	subb	$(SMBUS_MEM_CHANNEL_OFF), %bl
+
+	/* See if dimms on both sides are equally present */	
+	cmp	%cl, %ch
+	jne	sdram_presence_mismatch
+
+	/* Leave if I have no data */
+	testb	%cl, %cl
+	jz	spd_verify_byte_out
+
+	/* Verify the data is identical */
+	cmp	%ah, %al
+	jne	sdram_value_mismatch
+
+	/* Clear the zero flag */
+	testb	%cl, %cl
+spd_verify_byte_out:
+	movl	%ebp, %esp
+	RETSP
+}
+
+	/*
+	 * Routine:	spd_verify_dimms
+	 * Arguments:	none
+	 * Results:	none
+	 * Preserved:	none
+	 * Trashed:	%eax, %ebx, %ecx, %edx, %ebp, %esi, %edi, %esp, %eflags
+	 * Used:	%eax, %ebx, %ecx, %edx, %ebp, %esi, %edi, %esp, %eflags
+	 *
+	 * Effects:	
+	 *		- Verify all interesting spd information
+	 *		  matches for both dimm channels.
+	 *		- Additional error checks that can be easily done
+	 *		  here are computed as well, so I don't need to
+	 *		  worry about them later.
+	 */
+static spd_verify_dimms() {
+	movl	$(SMBUS_MEM_DEVICE_START), %ebx
+spd_verify_dimm:
+	/* Verify this is DDR SDRAM */
+	movb	$2, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_verify_next_dimm
+	cmpb	$7, %al
+	jne	invalid_dimm_type
+
+	/* Verify the row addresses */
+	movb	$3, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	testb	$0x0f, %al
+	jz	spd_invalid_data
+	
+	/* Column addresses */
+	movb	$4, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	testb	$0xf, %al
+	jz	spd_invalid_data
+
+	/* Physical Banks */
+	movb	$5, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	cmp	$1, %al
+	jb	spd_invalid_data
+	cmp	$2, %al
+	ja	spd_invalid_data
+
+	/* Module Data Width */
+	movb	$7, %bh
+	CALLSP(spd_read_paired_byte)	
+	jz	spd_missing_data
+	cmpb	$0, %al
+	jne	spd_invalid_data
+
+	movb	$6, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	cmpb	$64, %al
+	je	1f
+	cmpb	$72, %al
+	je	1f
+	jmp	spd_unsupported_data
+1:
+
+	/* Cycle time at highest CAS latency CL=X */
+	movb	$9, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+
+	/* SDRAM type */
+	movb	$11, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+
+	/* Refresh Interval */
+	movb	$12, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	
+	/* SDRAM Width */
+	movb	$13, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	andb	$0x7f, %al
+	cmpb	$4, %al
+	je	1f
+	cmpb	$8, %al
+	je	1f
+	jmp	spd_unsupported_data
+1:
+
+	/* Back-to-Back Random Column Accesses */
+	movb	$15, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	testb	%al, %al
+	jz	spd_invalid_data
+	cmpb	$4, %al
+	ja	spd_unsupported_data
+
+	/* Burst Lengths */
+	movb	$16, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	testb	$(1<<2), %al
+	jz	spd_unsupported_data
+
+	/* Logical Banks */
+	movb	$17, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	testb	%al, %al
+	jz	spd_invalid_data
+	
+	/* Supported CAS Latencies */
+	movb	$18, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	testb	$(1 << 1), %al /* CL 1.5 */
+	jnz	1f
+	testb	$(1 << 2), %al /* CL 2.0 */
+	jnz	1f
+	testb	$(1 << 3), %al /* CL 2.5 */
+	jnz	1f
+	jmp	spd_unsupported_data
+1:
+	
+	/* Cycle time at Cas Latency (CLX - 0.5) */
+	movb	$23, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	
+	/* Cycle time at Cas Latency (CLX - 1.0) */
+	movb	$26, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	
+	/* tRP Row precharge time */
+	movb	$27, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	testb	$0xfc, %al
+	jz	spd_invalid_data
+	
+
+	/* tRCD RAS to CAS */
+	movb	$29, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	testb	$0xfc, %al
+	jz	spd_invalid_data
+	
+	/* tRAS Activate to Precharge */
+	movb	$30, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	testb	%al, %al
+	jz	spd_invalid_data
+
+	/* Module Bank Density */
+	movb	$31, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+	testb	$(1<<2), %al		/* 16MB */
+	jnz	spd_unsupported_data
+	testb	$(1<<3), %al
+	jnz	spd_unsupported_data	/* 32MB */
+	
+	/* Address and Command Hold Time After Clock */
+	movb	$33, %bh
+	CALLSP(spd_read_paired_byte)
+	jz	spd_missing_data
+
+spd_verify_next_dimm:
+	/* go to the next DIMM */
+	addb	$(SMBUS_MEM_DEVICE_INC), %bl /* increment the smbus device */
+	cmpb	$SMBUS_MEM_DEVICE_END, %bl
+	jbe	spd_verify_dimm
+spd_verify_dimms_out:
+	RET_LABEL(spd_verify_dimms)
+}
+#endif
+#define spd_pre_init  "Reading SPD data...\r\n"
+#define spd_pre_set "setting based on SPD data...\r\n"
+#define spd_post_init "done\r\n"
+
+
+static const uint32_t refresh_rate_rank[]= {
+	/* Refresh rates ordered from most conservative (lowest)
+	 * to most agressive (highest)
+	 * disabled 0 -> rank 3 
+	 * 15.6usec 1 -> rank 1
+	 * 7.8 usec 2 -> rank 0
+	 * 64usec   3 -> rank 2
+	 */
+	3, 1, 0, 2 };
+static const uint32_t refresh_rate_index[] = {
+	/* Map the spd refresh rates to memory controller settings 
+	 * 15.625us -> 15.6us
+ 	 * 3.9us    -> err
+	 * 7.8us    -> 7.8us
+	 * 31.3s    -> 15.6us
+	 * 62.5us   -> 15.6us
+	 * 125us    -> 64us
+	 */
+	1, 0xff, 2, 1, 1, 3
+};
+#define MAX_SPD_REFRESH_RATE 5
+
+static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, long dimm_mask) {
+
+        int i;  
+        uint32_t dword;
+        int value;
+	uint32_t ecx;
+	uint32_t edx;
+        
+        /* Read the inititial state */
+        dword = pci_read_config32(ctrl->d0, 0x7c);
+
+#if 0
+        /* Test if ECC cmos option is enabled */
+        movb    $RTC_BOOT_BYTE, %al
+        outb    %al, $0x70
+        inb     $0x71, %al
+        testb   $(1<<2), %al
+        jnz     1f
+        /* Clear the ecc enable */
+        andl    $~(3 << 20), %esi
+1:
+#endif
+
+
+        /* Walk through all dimms and find the interesection of the support
+         * for ecc sdram and refresh rates
+         */        
+
+ 
+        for(i = 0; i < DIMM_SOCKETS; i++) {
+		if (!(dimm_mask & (1 << i))) {
+                        continue;
+                }
+		 /* Test to see if I have ecc sdram */
+                value = spd_read_byte(ctrl->channel0[i], 11);  /* SDRAM type */
+                if(value < 0) continue;
+		if(value !=2 ) {
+			/* Clear the ecc enable */
+			dword &= ~(3 << 20);
+		}
+		value = spd_read_byte(ctrl->channel0[i], 12);  /* SDRAM refresh rate */
+		if(value < 0 ) continue;
+		value &= 0x7f;
+		if(value > MAX_SPD_REFRESH_RATE) { print_err("unsupported refresh rate\r\n");}
+//		if(value == 0xff) { print_err("unsupported refresh rate\r\n");}
+		
+		ecx = refresh_rate_index[value];
+
+		/* Isolate the old refresh rate setting */
+		/* Load the refresh rate ranks */
+		edx = refresh_rate_rank[(dword >> 8) & 3]<<8;
+		edx |= refresh_rate_rank[ecx] & 0xff; 
+	
+		/* See if the new refresh rate is more conservative than the old
+	 	* refresh rate setting. (Lower ranks are more conservative)
+	 	*/
+		if((edx & 0xff)< ((edx >> 8) & 0xff) ) {
+			/* Clear the old refresh rate */
+			dword &= ~(3<<8);
+			/* Move in the new refresh rate */
+			dword |= (ecx<<8);
+		}
+		
+		value = spd_read_byte(ctrl->channel0[i], 33); /* Address and command hold time after clock */
+		if(value < 0) continue;
+		if(value >= 0xa0) { 		/* At 133Mhz this constant should be 0x75 */
+			dword &= ~(1<<16);	/* Use two clock cyles instead of one */
+		}
+	
+	/* go to the next DIMM */
+	}
+
+	/* Now write the controller mode */
+	pci_write_config32(ctrl->d0, 0x7c, dword);
+	
+	return dimm_mask;
+
+}
+static long spd_enable_clocks(const struct mem_controller *ctrl, long dimm_mask)
+{
+        int i;
+	uint32_t dword;
+	int value;
+
+        /* Read the inititial state */
+        dword = pci_read_config32(ctrl->d0, 0x8c);
+#if 0
+# Intel clears top bit here, should we?
+# No the default is on and for normal timming it should be on.  Tom Z
+        andl    $0x7f, %esi
+#endif
+
+ 
+        for(i = 0; i < DIMM_SOCKETS; i++) {
+		if (!(dimm_mask & (1 << i))) {
+                        continue;
+                }
+	        /* Read any spd byte to see if the dimm is present */
+	        value = spd_read_byte(ctrl->channel0[i], 5); /* Physical Banks */
+       	 	if(value < 0) continue;
+        
+        	dword &= ~(1<<i);
+        }
+	
+	pci_write_config32(ctrl->d0, 0x8c, dword);
+	
+	return dimm_mask;
+}
+
+static const uint16_t cas_latency_80[] = {
+	/* For cas latency 2.0 0x01 works and until I see a large test sample
+	 * I am not prepared to change this value, to the intel recommended value
+	 * of 0x0d.  Eric Biederman
+ 	 */
+ 	/* The E7501 requires b1 rather than 01 for CAS2 or memory will be hosed
+ 	 * CAS 1.5 is claimed to be unsupported, will try to test that
+ 	 * will need to determine correct values for other CAS values
+ 	 * (perhaps b5, b1, b6?)
+ 	 * Steven James 02/06/2003
+ 	 */
+ 	 
+//#	.byte 0x05, 0x01, 0x06 
+//#	.byte 0xb5, 0xb1, 0xb6 
+	0x0, 0x0bb1, 0x0662   /* RCVEN */ 
+};
+static const uint16_t cas_latency_80_4dimms[] = {
+        0x0, 0x0bb1, 0x0882
+};
+
+
+static const uint8_t cas_latency_78[] = {
+	DRT_CAS_1_5, DRT_CAS_2_0, DRT_CAS_2_5
+};
+
+static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mask) {
+	/* Walk through all dimms and find the interesection of the
+	 * supported cas latencies.
+	 */
+        int i;
+        /* Initially allow cas latencies 2.5, 2.0
+         * which the chipset supports.
+         */
+	uint32_t dword = (1<<3)| (1<<2);// esi
+	uint32_t edi;
+	uint32_t ecx;
+	unsigned device;
+	int value;
+	uint8_t byte;
+	uint16_t word;
+
+	
+        for(i = 0; i < DIMM_SOCKETS; i++) {
+		if (!(dimm_mask & (1 << i))) {
+                        continue;
+                }
+		value = spd_read_byte(ctrl->channel0[i], 18);
+		if(value < 0) continue;
+		/* Find the highest supported cas latency */
+		ecx = log2(value & 0xff); 
+		edi = (1<< ecx);
+
+		 /* Remember the supported cas latencies */
+        	ecx = (value & 0xff);
+
+		/* Verify each cas latency at 133Mhz */
+		/* Verify slowest/highest CAS latency */
+		value = spd_read_byte(ctrl->channel0[i], 9);
+		if(value < 0 ) continue;
+		if(value > 0x75 ) {	
+			/* The bus is too fast so we cannot support this case latency */
+			ecx &= ~edi;
+		}
+
+		/* Verify the highest CAS latency - 0.5 clocks */
+		edi >>= 1;
+		if(edi != 0) {
+			value = spd_read_byte(ctrl->channel0[i], 23);
+			if(value < 0 ) continue;
+			if(value > 0x75) {
+				/* The bus is too fast so we cannot support this cas latency */
+				ecx &= ~edi;
+			}
+		}
+
+		/* Verify the highest CAS latency - 1.0 clocks */
+		edi >>=1;
+		if(edi !=0) {
+                        value = spd_read_byte(ctrl->channel0[i], 25);
+                        if(value < 0 ) continue;
+                        if(value > 0x75) {
+                                /* The bus is too fast so we cannot support this cas latency */
+                                ecx &= ~edi;
+                        }
+		}
+
+		/* Now find which cas latencies are supported for the bus */
+		dword &= ecx;
+	/* go to the next DIMM */
+	}
+
+	/* After all of the arduous calculation setup with the fastest
+	 * cas latency I can use.
+	 */
+	value = __builtin_bsf(dword);  // bsrl = log2 how about bsfl?
+	if(value ==0 ) return -1;
+	ecx = value -1;
+
+	byte = pci_read_config8(ctrl->d0, 0x78);
+	byte &= ~(DRT_CAS_MASK);
+	byte |= cas_latency_78[ecx];
+	pci_write_config8(ctrl->d0,0x78, byte);
+
+	/* set master DLL reset */
+	dword = pci_read_config32(ctrl->d0, 0x88);
+	dword |= (1<<26);
+	
+	/* the rest of the references are words */
+//	ecx<<=1;  // don't need shift left, because we already define that in u16 array
+	pci_write_config32(ctrl->d0, 0x88, dword);
+	
+	
+	dword &= 0x0c0000ff;	/* patch try register 88 is undocumented tnz */
+	dword |= 0xd2109800;
+
+	pci_write_config32(ctrl->d0, 0x88, dword);
+	
+	word = pci_read_config16(ctrl->d0, 0x80);
+	word &= ~(0x0fff);
+	word |= cas_latency_80[ecx];
+
+	dword = pci_read_config32(ctrl->d0, 0x70);
+
+	if((dword & 0xff) !=0 ) {
+		dword >>=8;
+		if((dword & 0xff)!=0) {
+			dword >>=8;
+			if((dword & 0xff)!=0) {
+				dword >>= 8;
+				if( (dword & 0xff)!=0) {
+        				word &=~(0x0fff);  /* we have dimms in all 4 slots */ 
+        				word |=cas_latency_80_4dimms[ecx];
+				}
+			}
+		}
+	}
+	
+	pci_write_config16(ctrl->d0, 0x80, word);
+	
+	dword = pci_read_config32(ctrl->d0, 0x88);	/* reset master DLL reset */
+	dword &= ~(1<<26);
+	pci_write_config32(ctrl->d0, 0x88, dword);
+	
+	RAM_RESET_DDR_PTR(ctrl);
+
+	return dimm_mask;
+
+}
+
+static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mask) {
+	/* Walk through all dimms and find the interesection of the
+	 * supported dram timings.
+	 */
+
+        int i;
+        uint32_t dword;
+        int value;
+
+        /* Read the inititial state */
+        dword = pci_read_config32(ctrl->d0, 0x78);
+#if 0
+# Intel clears top bit here, should we?
+# No the default is on and for normal timming it should be on.  Tom Z
+        andl    $0x7f, %esi
+#endif
+        
+        
+        for(i = 0; i < DIMM_SOCKETS; i++) {
+		if (!(dimm_mask & (1 << i))) {
+                        continue;
+                }
+		/* Trp */
+                value = spd_read_byte(ctrl->channel0[i], 27);
+                if(value < 0) continue;
+		if(value > (15<<2)) {
+        		/* At 133Mhz if row precharge time is above than 15ns than we
+         		 * need 3 clocks not 2 clocks.
+         		*/
+			dword &= ~(1<<0); 
+		}
+		/*  Trcd */
+		value = spd_read_byte(ctrl->channel0[i],29);
+		if(value < 0 ) continue;
+		if(value > (15<<2)) {
+		        /* At 133Mhz if the Minimum ras to cas delay is about 15ns we
+        		 * need 3 clocks not 2 clocks.
+         		*/
+			dword &= ~((1<<3)|(1<<1));
+		}
+		/* Tras */
+		value = spd_read_byte(ctrl->channel0[i],30);
+		if(value < 0 ) continue;
+		        /* Convert tRAS from ns to 133Mhz clock cycles */
+		value <<=1;	 /* mult by 2 to make 7.5 15 */
+		value  += 15;	/* Make certain we round up */
+		value --;
+		value &= 0xff;	/* Clear the upper bits of eax */
+		value /= 15;
+		
+		/* Don't even process small timings */
+		if(value >5) {
+			uint32_t tmp;
+			/* Die if the value is to large */
+			if(value>7) {
+				die ("unsupported_rcd\r\n");
+			}
+			/* Convert to clocks - 5 */
+			value -=5;
+			/* Convert the existing value into clocks - 5 */
+			tmp = (~((dword>>9) & 3) - 1) & 3;
+			/* See if we need a slower timing */
+			if(value > tmp ) {
+				/* O.k. put in our slower timing */
+				dword &= ~(3<<9);
+				dword |= ((~(value + 1)) & 3)<<9 ;
+			}
+		}
+	
+		/* Trd */ 
+		/* Set to a 7 clock read delay. This is for 133Mhz
+	 	*  with a CAS latency of 2.5  if 2.0 a 6 clock
+	 	*  delay is good  */
+		if( (pci_read_config8(ctrl->d0, 0x78) & 0x30) ==0 ){
+			dword &= ~(7<<24); /* CAS latency is 2.5, make 7 clks */
+		}
+
+		/*
+	 	* Back to Back Read Turn Around
+	 	*/
+		/* Set to a 3 clock back to back read turn around.  This
+	 	 *  is good for CAS latencys 2.5 and 2.0 */
+		dword |= (1<<27);
+		/*
+	 	* Back to Back Read-Write Turn Around
+	 	*/
+		/* Set to a 5 clock back to back read to write turn around.
+	 	*  4 is a good delay if the CAS latency is 2.0 */
+		if( ( pci_read_config8(ctrl->d0, 0x78) & (1<<4)) == 0) {
+			dword &= ~(1<<28);
+		}
+		/*
+	 	* Back to Back Write-Read Turn Around
+	 	*/
+		/* Set to a 2 clock back to back write to read turn around.
+	 	*  This is good for 2.5 and 2.0 CAS Latencies. */
+		dword |= (1<<29);
+	}
+	
+	pci_write_config32(ctrl->d0, 0x78, dword);
+	
+	return dimm_mask;
+
+}
+static unsigned int spd_detect_dimms(const struct mem_controller *ctrl)
+{               
+        unsigned dimm_mask;
+        int i;  
+        dimm_mask = 0;  
+#if DEBUG_RAM_CONFIG
+	print_debug("spd_detect_dimms:\r\n");
+#endif
+        for(i = 0; i < DIMM_SOCKETS; i++) {
+                int byte;
+                unsigned device;
+#if DEBUG_RAM_CONFIG
+		print_debug_hex32(i);
+		print_debug("\r\n");
+#endif
+                device = ctrl->channel0[i];
+                if (device) {
+                        byte = spd_read_byte(ctrl->channel0[i], 2);  /* Type */
+                        if (byte == 7) {
+                                dimm_mask |= (1 << i);
+                        }
+                }
+#if 1
+                device = ctrl->channel1[i];
+                if (device) {
+                        byte = spd_read_byte(ctrl->channel1[i], 2);
+                        if (byte == 7) {
+                                dimm_mask |= (1 << (i + DIMM_SOCKETS));
+                        }
+                }
+#endif
+        }       
+#if 1
+	i = (dimm_mask>>DIMM_SOCKETS);
+	if(i != (dimm_mask & ( (1<<DIMM_SOCKETS) - 1) ) ) {
+		die("now we only support dual channel\r\n");
+	}
+
+#endif
+
+        return dimm_mask;
+}               
+
+static uint32_t set_dimm_size(const struct mem_controller *ctrl, struct dimm_size sz, uint32_t memsz, unsigned index)
+{
+        int i;
+        uint32_t base0, base1;
+        uint32_t dch;
+	uint8_t byte;
+
+        /* Double the size if we are using dual channel memory */
+//        if (is_dual_channel(ctrl)) {
+                /* Since I have 2 identical channels double the sizes */
+                sz.side1++ ;
+                sz.side2++;
+//        }
+              
+	if (sz.side1 != sz.side2) {
+                sz.side2 = 0;
+        } 
+ 
+        /* Make certain side1 of the dimm is at least 64MB */
+        if (sz.side1 >= (25 + 4)) {
+                memsz += (1 << (sz.side1 - (25 + 4)) ) ;
+        }
+	 /* Write the size of side 1 of the dimm */
+	byte = memsz;
+        pci_write_config8(ctrl->d0, 0x60+(index<<1), byte);
+
+        /* Make certain side2 of the dimm is at least 64MB */
+        if (sz.side2 >= (25 + 4)) {
+                memsz += (1 << (sz.side2 - (25 + 4)) ) ;
+        }
+        
+         /* Write the size of side 2 of the dimm */
+	byte = memsz;
+        pci_write_config8(ctrl->d0, 0x61+(index<<1), byte);
+        
+        /* now, fill in DRBs where no physical slot exists */
+        
+        for(i=index+1;i<4;i++) {
+                pci_write_config8(ctrl->d0, 0x60+(i<<1),byte);
+                pci_write_config8(ctrl->d0, 0x61+(i<<1),byte);
+        
+        }
+        
+        return memsz;
+
+}
+/* LAST_DRB_SLOT is a constant for any E7500 board */
+#define LAST_DRB_SLOT 0x67
+
+static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask)
+{
+        int i;
+        uint32_t memsz=0;
+	uint16_t word;
+
+        for(i = 0; i < DIMM_SOCKETS; i++) {
+                struct dimm_size sz;
+                if (!(dimm_mask & (1 << i))) {
+                        continue;
+                }
+                sz = spd_get_dimm_size(ctrl->channel0[i]);
+#if DEBUG_RAM_CONFIG
+                print_debug("dimm size =");
+                print_debug_hex32(sz.side1);
+                print_debug(" ");
+                print_debug_hex32(sz.side2);
+                print_debug("\r\n");
+#endif
+
+                if (sz.side1 == 0) {
+			return -1; /* Report SPD error */
+                }
+                memsz = set_dimm_size(ctrl, sz, memsz, i);
+        }
+        /* For now hardset everything at 128MB boundaries */
+        /* %ebp has the ram size in multiples of 64MB */
+//        cmpl    $0, %ebp        /* test if there is no mem - smbus went bad */
+//        jz      no_memory_bad_smbus
+        if(memsz < 0x30)  {
+        	/* I should really adjust all of this in C after I have resources
+         	* to all of the pcie devices.
+         	*/
+
+        	/* Round up to 128M granularity */
+        	memsz++;
+        	memsz &= 0xfe;
+        	memsz<<= 10;
+		word = memsz;
+        	pci_write_config16(ctrl->d0, 0xc4, word);
+        } else {
+
+        	/* FIXME will this work with 3.5G of ram? */
+        	/* Put TOLM at 3G */
+        	pci_write_config16(ctrl->d0, 0xc4, 0xc000);
+        	/* Hard code a 1G remap window, right after the ram */
+        	if(memsz< 0x40){
+                	word = 0x40;  /* Ensure we are over 4G */
+        	} else {
+			word = memsz;
+		}
+        	pci_write_config16(ctrl->d0, 0xc6, word);
+		word += 0x10;
+        	pci_write_config16(ctrl->d0, 0xc8, word);
+
+        }
+
+        return dimm_mask;
+}
+                                                
+static void sdram_set_spd_registers(const struct mem_controller *ctrl) {
+	long dimm_mask;
+#if DEBUG_RAM_CONFIG
+	print_debug(spd_pre_init);
+#endif
+        //activate_spd_rom(ctrl);
+        dimm_mask = spd_detect_dimms(ctrl);
+	if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) {
+                print_debug("No memory for this controller\n");
+                return;
+        }
+	dimm_mask = spd_enable_clocks(ctrl, dimm_mask);
+        if (dimm_mask < 0)
+                goto hw_spd_err;
+	//spd_verify_dimms(ctrl);
+#if DEBUG_RAM_CONFIG
+	print_debug(spd_pre_set);
+#endif
+	dimm_mask = spd_set_row_attributes(ctrl,dimm_mask);
+        if (dimm_mask < 0)
+                goto hw_spd_err;
+	dimm_mask = spd_set_dram_controller_mode(ctrl,dimm_mask);
+        if (dimm_mask < 0)
+                goto hw_spd_err;	
+	dimm_mask = spd_set_cas_latency(ctrl,dimm_mask);
+        if (dimm_mask < 0)
+                goto hw_spd_err;
+	dimm_mask = spd_set_dram_timing(ctrl,dimm_mask);
+        if (dimm_mask < 0)
+                goto hw_spd_err;
+#if DEBUG_RAM_CONFIG
+	print_debug(spd_post_init);
+#endif
+	//moved from dram_post_init
+	spd_set_ram_size(ctrl, dimm_mask);
+	        return;
+ hw_spd_err:
+        /* Unrecoverable error reading SPD data */
+        print_err("SPD error - reset\r\n");
+        hard_reset();
+        return;
+}
+
+
+	/* I have finally seen ram bad enough to cause LinuxBIOS
+	 * to die in mysterious ways, before booting up far
+	 * enough to run a memory tester.  This code attempts
+	 * to catch this blatantly bad ram, with a spot check.
+	 * For most cases you should boot all of the way up 
+	 * and run a memory tester.  
+	 */
+	/* Ensure I read/write each stick of bank of memory &&
+	 * that I do more than 1000 bytes to avoid the northbridge cache.
+	 * Only 64M of each side of each DIMM is currently mapped,
+	 * so we can handle > 4GB of ram here.
+	 */
+#if 0
+#define bank_msg  "Bank "
+#define side_msg " Side "
+static void verify_ram() {
+	xorl	%ecx, %ecx
+	/* Check to see if the RAM is present,
+	 * in the specified bank and side.
+	 */
+1:	movl	%ecx, %ebx
+	shrl	$1, %ebx
+	addl	$((5<<8) | SMBUS_MEM_DEVICE_START), %ebx
+	CALLSP(smbus_read_byte)
+	jz	5f
+	testl	$1, %ecx
+	jz	2f
+	cmpb	$2, %al
+	jne	5f
+
+	/* Display the bank and side we are spot checking.
+	 */
+2:	CONSOLE_INFO_TX_STRING($bank_msg)
+	movl	%ecx, %ebx
+	shrl	$1, %ebx
+	incl	%ebx
+	CONSOLE_INFO_TX_HEX8(%bl)
+	CONSOLE_INFO_TX_STRING($side_msg)
+	movl	%ecx, %ebx
+	andl	$1, %ebx
+	CONSOLE_INFO_TX_HEX8(%bl)
+
+	/* Compute the memory address to spot check. */
+	movl	%ecx, %ebx
+	xorl	%eax, %eax
+3:	testl	%ebx, %ebx
+	jz	4f
+	addl	$0x04000000, %eax
+	decl	%ebx
+	jmp	3b
+4:
+	/* Spot check 512K of RAM */
+	movl	%eax, %ebx
+	addl	$0x0007ffff, %ebx
+	CALLSP(spot_check)
+5:	
+	/* Now find the next bank and side to spot check */
+	incl	%ecx
+	cmpl	$((SMBUS_MEM_DEVICE_END - SMBUS_MEM_DEVICE_START)<<1), %ecx
+	jb	1b
+	RET_LABEL(verify_ram)
+
+}
+#endif	
+
+#if 0
+static void ram_postinit(const struct mem_controller *ctrl) {
+#if DEBUG_RAM_CONFIG 
+	dumpnorth();
+#endif
+	/* Include a test to verify that memory is more or less working o.k. 
+  	 * This test is to catch programming errors and hardware that is out of
+	 * spec, not a test to see if the memory dimms are working 100%
+	 */
+//#	CALL_LABEL(verify_ram)
+	spd_set_ram_size(ctrl);
+}
+#define FIRST_NORMAL_REFERENCE() CALL_LABEL(ram_postinit)
+
+#define SPECIAL_FINISHUP()   CALL_LABEL(dram_finish)
+
+#endif
+
+#define ecc_pre_init	"Initializing ECC state...\r\n"
+#define ecc_post_init	"ECC state initialized.\r\n"
+static void dram_finish(const struct mem_controller *ctrl)
+{
+	uint32_t dword;
+	uint8_t byte;
+	/* Test to see if ECC support is enabled */
+	dword = pci_read_config32(ctrl->d0, 0x7c);
+	dword >>=20;
+	dword &=3;
+	if(dword == 2)  {
+		
+#if DEBUG_RAM_CONFIG	
+		print_debug(ecc_pre_init);
+#endif
+		/* Initialize ECC bits , use ECC zero mode (new to 7501)*/
+		pci_write_config8(ctrl->d0, 0x52, 0x06);
+		pci_write_config8(ctrl->d0, 0x52, 0x07);
+		do {
+			byte = pci_read_config8(ctrl->d0, 0x52);
+
+		} while ( (byte & 0x08 ) == 0);
+
+		pci_write_config8(ctrl->d0, 0x52, byte & 0xfc);
+#if DEBUG_RAM_CONFIG		
+		print_debug(ecc_post_init);	
+#endif
+
+		/* Clear the ECC error bits */
+		pci_write_config8(ctrl->d0f1, 0x80, 0x03); /* dev 0, function 1, offset 80 */
+		pci_write_config8(ctrl->d0f1, 0x82, 0x03); /* dev 0, function 1, offset 82 */
+
+		pci_write_config32(ctrl->d0f1, 0x40, 1<<18); /* clear dev 0, function 1, offset 40; bit 18 by writing a 1 to it */
+  	        pci_write_config32(ctrl->d0f1, 0x44, 1<<18); /* clear dev 0, function 1, offset 44; bit 18 by writing a 1 to it */
+
+		pci_write_config8(ctrl->d0, 0x52, 0x0d);
+	}
+	
+	dword = pci_read_config32(ctrl->d0, 0x7c); /* FCS_EN */
+	dword |= (1<<17);
+	pci_write_config32(ctrl->d0, 0x7c, dword);
+
+
+#if DEBUG_RAM_CONFIG 
+	dumpnorth();
+#endif
+
+//	verify_ram();
+}
+#if 0
+#define ERRFUNC(x, str) mem_err(x, str)
+
+
+ERRFUNC(invalid_dimm_type,          "Invalid dimm type")
+ERRFUNC(spd_missing_data,           "Missing sdram spd data")
+ERRFUNC(spd_invalid_data,           "Invalid sdram spd data")
+ERRFUNC(spd_unsupported_data,       "Unsupported sdram spd value")
+ERRFUNC(unsupported_page_size,      "Unsupported page size")
+ERRFUNC(sdram_presence_mismatch,    "DIMM presence mismatch")
+ERRFUNC(sdram_value_mismatch,       "spd data does not match")
+ERRFUNC(unsupported_refresh_rate,   "Unsuported spd refresh rate")
+ERRFUNC(inconsistent_cas_latencies, "No cas latency supported by all dimms")
+ERRFUNC(unsupported_rcd,            "Unsupported ras to cas delay")
+#undef ERRFUNC
+
+#define mem_err_err "ERROR: "
+#define mem_err_pair " on dimm pair "
+#define mem_err_byte " spd byte "
+static void mem_err {
+	movl	%ebx, %edi
+	CONSOLE_ERR_TX_STRING($mem_err_err)
+	CONSOLE_ERR_TX_STRING(%esi)
+	CONSOLE_ERR_TX_STRING($mem_err_pair)
+	movl	%edi, %ebx
+	subb	$(SMBUS_MEM_DEVICE_START), %bl
+	CONSOLE_ERR_TX_HEX8(%bl)
+	CONSOLE_ERR_TX_STRING($mem_err_byte)
+	movl	%edi, %ebx
+	CONSOLE_ERR_TX_HEX8(%bh)
+	jmp	mem_stop
+
+}
+
+#endif
+
+
+#if ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG
+#define ram_enable_1    "Ram Enable 1\r\n"
+#define ram_enable_2	"Ram Enable 2\r\n"
+#define ram_enable_3 	"Ram Enable 3\r\n"
+#define ram_enable_4 	"Ram Enable 4\r\n"
+#define ram_enable_5 	"Ram Enable 5\r\n"
+#define ram_enable_6 	"Ram Enable 6\r\n"
+#define ram_enable_7 	"Ram Enable 7\r\n"
+#define ram_enable_8 	"Ram Enable 8\r\n"
+#define ram_enable_9 	"Ram Enable 9\r\n"
+#define ram_enable_10 	"Ram Enable 10\r\n"
+#define ram_enable_11 	"Ram Enable 11\r\n"
+#endif
+
+	/* Estimate that SLOW_DOWN_IO takes about 50&76us*/
+	/* delay for 200us */
+
+#define DO_DELAY \
+	udelay(200);
+//	for(i=0; i<16;i++)  { 	SLOW_DOWN_IO	}
+		
+
+#define EXTRA_DELAY DO_DELAY
+
+static void sdram_enable(int controllers, const struct mem_controller *ctrl)
+{
+	int i;
+	/* 1 & 2 Power up and start clocks */
+#if DEBUG_RAM_CONFIG 
+	print_debug(ram_enable_1);
+	print_debug(ram_enable_2);
+#endif
+
+	/* A 200us delay is needed */
+
+	DO_DELAY
+	EXTRA_DELAY
+
+	/* 3. Apply NOP */
+#if DEBUG_RAM_CONFIG 
+	print_debug(ram_enable_3);
+#endif
+	RAM_NOP(ctrl);
+	EXTRA_DELAY
+
+	/* 4 Precharge all */
+#if DEBUG_RAM_CONFIG 
+	print_debug(ram_enable_4);
+#endif
+	RAM_PRECHARGE(ctrl);
+	EXTRA_DELAY
+	
+	/* wait until the all banks idle state... */
+	/* 5. Issue EMRS to enable DLL */
+#if DEBUG_RAM_CONFIG 
+	print_debug(ram_enable_5);
+#endif
+	RAM_EMRS(ctrl);
+	EXTRA_DELAY
+	
+	/* 6. Reset DLL */
+#if DEBUG_RAM_CONFIG 
+	print_debug(ram_enable_6);
+#endif
+	RAM_MRS(ctrl,1);
+	EXTRA_DELAY
+
+	/* Ensure a 200us delay between the DLL reset in step 6 and the final
+	 * mode register set in step 9.
+	 * Infineon needs this before any other command is sent to the ram.
+	 */
+	DO_DELAY
+	EXTRA_DELAY
+	
+	/* 7 Precharge all */
+#if DEBUG_RAM_CONFIG 
+	print_debug(ram_enable_7);
+#endif
+	RAM_PRECHARGE(ctrl);
+	EXTRA_DELAY
+	
+	/* 8 Now we need 2 AUTO REFRESH / CBR cycles to be performed */
+#if DEBUG_RAM_CONFIG 
+	print_debug(ram_enable_8);
+#endif
+	RAM_CBR(ctrl);
+	EXTRA_DELAY
+	RAM_CBR(ctrl);
+	EXTRA_DELAY
+	/* And for good luck 6 more CBRs */
+	RAM_CBR(ctrl);
+	EXTRA_DELAY
+	RAM_CBR(ctrl);
+	EXTRA_DELAY
+	RAM_CBR(ctrl);
+	EXTRA_DELAY
+	RAM_CBR(ctrl);
+	EXTRA_DELAY
+	RAM_CBR(ctrl);
+	EXTRA_DELAY
+	RAM_CBR(ctrl);
+	EXTRA_DELAY
+
+	/* 9 mode register set */
+#if DEBUG_RAM_CONFIG 
+	print_debug(ram_enable_9);
+#endif
+	RAM_MRS(ctrl,0);
+	EXTRA_DELAY
+	
+	/* 10 DDR Receive FIFO RE-Sync */
+#if DEBUG_RAM_CONFIG 
+	print_debug(ram_enable_10);
+#endif
+	RAM_RESET_DDR_PTR(ctrl);
+	EXTRA_DELAY
+	
+	/* 11 normal operation */
+#if DEBUG_RAM_CONFIG 
+	print_debug(ram_enable_11);
+#endif
+	RAM_NORMAL(ctrl);
+
+
+	// special from v1
+        //FIRST_NORMAL_REFERENCE();
+	//spd_set_ram_size(ctrl, 0x03);
+
+        /* Finally enable refresh */
+        ENABLE_REFRESH(ctrl);
+
+	//SPECIAL_FINISHUP();
+	dram_finish(ctrl);
+
+}
+
diff --git a/src/northbridge/intel/855pm/raminit.h b/src/northbridge/intel/855pm/raminit.h
new file mode 100644
index 0000000000..c1dc4baeaf
--- /dev/null
+++ b/src/northbridge/intel/855pm/raminit.h
@@ -0,0 +1,12 @@
+#ifndef RAMINIT_H
+#define RAMINIT_H
+
+#define DIMM_SOCKETS 4
+struct mem_controller {
+	device_t d0, d0f1; 
+	uint16_t channel0[DIMM_SOCKETS];
+	uint16_t channel1[DIMM_SOCKETS];
+};
+
+
+#endif /* RAMINIT_H */
diff --git a/src/northbridge/intel/855pm/reset_test.c b/src/northbridge/intel/855pm/reset_test.c
new file mode 100644
index 0000000000..79a5cdaee1
--- /dev/null
+++ b/src/northbridge/intel/855pm/reset_test.c
@@ -0,0 +1,18 @@
+/* Convert to C by yhlu */
+#define MCH_DRC 0x7c
+#define DRC_DONE (1 << 29)
+	/* If I have already booted once skip a bunch of initialization */
+	/* To see if I have already booted I check to see if memory
+	 * has been enabled.
+	 */
+static int bios_reset_detected(void) {
+	uint32_t dword;
+	
+	dword = pci_read_config32(PCI_DEV(0, 0, 0), MCH_DRC);
+	
+	if( (dword & DRC_DONE) != 0 ) {
+		return 1;
+	} 
+	
+	return 0;
+}