src: Fix typo

Change-Id: I689c5663ef59861f79b68220abd146144f7618de
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>

10 files changed, 15 insertions, 15 deletions

diff --git a/src/northbridge/amd/amdfam10/misc_control.c b/src/northbridge/amd/amdfam10/misc_control.c
index 028f6af460..8323c1e20f 100644
--- a/src/northbridge/amd/amdfam10/misc_control.c
+++ b/src/northbridge/amd/amdfam10/misc_control.c
@@ -19,7 +19,7 @@
 
 /* Turn off machine check triggers when reading
  * pci space where there are no devices.
- * This is necessary when scaning the bus for
+ * This is necessary when scanning the bus for
  * devices which is done by the kernel
  */
 
diff --git a/src/northbridge/amd/amdmct/mct/mctecc_d.c b/src/northbridge/amd/amdmct/mct/mctecc_d.c
index 18774ebe7a..7be63533a9 100644
--- a/src/northbridge/amd/amdmct/mct/mctecc_d.c
+++ b/src/northbridge/amd/amdmct/mct/mctecc_d.c
@@ -68,7 +68,7 @@ static u8 isDramECCEn_D(struct DCTStatStruc *pDCTstat);
  * (aka SW memhole, cs hoisting, etc..).To init ECC memory on this node, the
  * scrubber is used in two steps.  First, the Dram Limit for the node is adjusted
  * down to the bottom of the gap, and that ECC dram is initialized.  Second, the
- * orignal Limit is restored, the Scrub base is set to 4GB, and scrubber is
+ * original Limit is restored, the Scrub base is set to 4GB, and scrubber is
  * allowed to run until the Scrub Addr wraps around to zero.
  */
 u8 ECCInit_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA)
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c
index 31c23b9445..20a636e480 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c
@@ -83,7 +83,7 @@ static uint8_t is_fam15h(void)
  * (aka SW memhole, cs hoisting, etc..).To init ECC memory on this node, the
  * scrubber is used in two steps.  First, the Dram Limit for the node is adjusted
  * down to the bottom of the gap, and that ECC dram is initialized.  Second, the
- * orignal Limit is restored, the Scrub base is set to 4GB, and scrubber is
+ * original Limit is restored, the Scrub base is set to 4GB, and scrubber is
  * allowed to run until the Scrub Addr wraps around to zero.
  */
 u8 ECCInit_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA)
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c
index ed942eaff2..f62aa1568a 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c
@@ -924,7 +924,7 @@ void programODT(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, ui
 	u8 WrLvOdt1 = 0;
 
 	if (is_fam15h()) {
-		/* On Family15h processors, the value for the specific CS being targetted
+		/* On Family15h processors, the value for the specific CS being targeted
 		 * is taken from F2x238 / F2x23C as appropriate, then loaded into F2x9C_x0000_0008
 		 */
 
diff --git a/src/northbridge/amd/amdmct/wrappers/mcti_d.c b/src/northbridge/amd/amdmct/wrappers/mcti_d.c
index 3d9ff3ec14..bcf3ddc7fd 100644
--- a/src/northbridge/amd/amdmct/wrappers/mcti_d.c
+++ b/src/northbridge/amd/amdmct/wrappers/mcti_d.c
@@ -170,7 +170,7 @@ u16 mctGet_NVbits(u8 index)
 	case NV_SPDCHK_RESTRT:
 		val = 0;	/* Exit current node initialization if any DIMM has SPD checksum error */
 		//val = 1;	/* Ignore faulty SPD checksum (DIMM will still be disabled), continue current node initialization */
-		//val = 2;	/* Override faulty SPD checksum (DIMM will be enabled), continue current node intialization */
+		//val = 2;	/* Override faulty SPD checksum (DIMM will be enabled), continue current node initialization */
 
 		if (get_option(&nvram, "dimm_spd_checksum") == CB_SUCCESS)
 			val = nvram & 0x3;
diff --git a/src/northbridge/amd/lx/northbridgeinit.c b/src/northbridge/amd/lx/northbridgeinit.c
index 6c2efb320c..c7db156ceb 100644
--- a/src/northbridge/amd/lx/northbridgeinit.c
+++ b/src/northbridge/amd/lx/northbridgeinit.c
@@ -122,7 +122,7 @@ static void SysmemInit(struct gliutable *gl)
 	int sizembytes, sizebytes;
 
 	/*
-	 * Figure out how much RAM is in the machine and alocate all to the
+	 * Figure out how much RAM is in the machine and allocate all to the
 	 * system. We will adjust for SMM now and Frame Buffer later.
 	 */
 	sizembytes = sizeram();
@@ -272,7 +272,7 @@ static void GLPCIInit(void)
 		 * base of 1M and top of around 256M
 		 */
 		/* we have to create a page-aligned (4KB page) address for base and top */
-		/* So we need a high page aligned addresss (pah) and low page aligned address (pal)
+		/* So we need a high page aligned address (pah) and low page aligned address (pal)
 		 * pah is from msr.hi << 12 | msr.low >> 20. pal is msr.lo << 12
 		 */
 		pah = ((msr.hi & 0xFF) << 12) | ((msr.lo >> 20) & 0xFFF);
diff --git a/src/northbridge/intel/gm45/raminit.c b/src/northbridge/intel/gm45/raminit.c
index 08f954d057..03f617c6a3 100644
--- a/src/northbridge/intel/gm45/raminit.c
+++ b/src/northbridge/intel/gm45/raminit.c
@@ -869,7 +869,7 @@ static void configure_dram_control_mode(const timings_t *const timings, const di
 
 static void rcomp_initialization(const stepping_t stepping, const int sff)
 {
-	/* Programm RCOMP codes. */
+	/* Program RCOMP codes. */
 	if (sff)
 		die("SFF platform unsupported in RCOMP initialization.\n");
 	/* Values are for DDR3. */
@@ -1825,7 +1825,7 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume)
 	/* Some last optimizations. */
 	dram_optimizations(timings, dimms);
 
-	/* Mark raminit beeing finished. :-) */
+	/* Mark raminit being finished. :-) */
 	u8 tmp8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2) & ~(1 << 7);
 	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, tmp8);
 
diff --git a/src/northbridge/intel/pineview/raminit.c b/src/northbridge/intel/pineview/raminit.c
index 66f0a10419..2a1e34cea2 100644
--- a/src/northbridge/intel/pineview/raminit.c
+++ b/src/northbridge/intel/pineview/raminit.c
@@ -1972,7 +1972,7 @@ static void sdram_rcven(struct sysinfo *s)
 			MCHBAR32(0x248) = (MCHBAR32(0x248) & ~0xf0000)
 						| (curcoarse << 16);
 			if (curcoarse == 0) {
-				PRINTK_DEBUG("Error: DQS didnt hit 0\n");
+				PRINTK_DEBUG("Error: DQS did not hit 0\n");
 				break;
 			}
 		}
diff --git a/src/northbridge/intel/x4x/raminit_tables.c b/src/northbridge/intel/x4x/raminit_tables.c
index 401af15cd8..ebd1562bde 100644
--- a/src/northbridge/intel/x4x/raminit_tables.c
+++ b/src/northbridge/intel/x4x/raminit_tables.c
@@ -332,7 +332,7 @@ const u32 ddr3_c2_tab[2][3][6][2] = { /* [n-mode][ddr3 freq][CAS][reg] */
 			{0x0189, 0x000aaa}, /* CAS = 5 */
 			{0x0189, 0x101aaa}, /* CAS = 6 */
 			{0x0000, 0x000000}, /* CAS = 7 - Not supported */
-			{0x0000, 0x000000} /* CAS = 8 - Not suppported */
+			{0x0000, 0x000000} /* CAS = 8 - Not supported */
 		},
 		{ /* DDR3 1067 */
 			{0x0000, 0x000000}, /* CAS = 5 - Not supported */
diff --git a/src/northbridge/via/vx900/raminit_ddr3.c b/src/northbridge/via/vx900/raminit_ddr3.c
index eec4aa357f..17a87bbe97 100644
--- a/src/northbridge/via/vx900/raminit_ddr3.c
+++ b/src/northbridge/via/vx900/raminit_ddr3.c
@@ -42,7 +42,7 @@
  *
  * The capture window is not calibrated, but preset. Whether that preset is
  * universal or frequency dependent, and whether it is board-specific or not is
- * not yet clear. @see vx900_dram_calibrate_recieve_delays().
+ * not yet clear. @see vx900_dram_calibrate_receive_delays().
  *
  * 4GBit and 8GBit modules may not work. This is untested. Modules with 11
  * column address bits are not tested. @see vx900_dram_map_row_col_bank()
@@ -166,7 +166,7 @@ static pci_reg8 mcu_init_config[] = {
 	{0x66, 0x80},		/* DRAM Queue / Arbitration */
 	{0x69, 0xc6},		/* Bank Control: 8 banks, high priority refresh */
 	{0x6a, 0xfc},		/* DRAMC Request Reorder Control */
-	{0x6e, 0x38},		/* Burst lenght: 8, burst-chop: enable */
+	{0x6e, 0x38},		/* Burst length: 8, burst-chop: enable */
 	{0x73, 0x04},		/* Close All Pages Threshold */
 
 	/* The following need to be dynamically asserted */
@@ -1224,7 +1224,7 @@ static void vx900_rxdqs_adjust(delay_range * dly)
 	vx900_write_0x78_0x7f(dly->avg);
 }
 
-static void vx900_dram_calibrate_recieve_delays(vx900_delay_calib * delays,
+static void vx900_dram_calibrate_receive_delays(vx900_delay_calib * delays,
 						u8 pinswap)
 {
 	size_t n_tries = 0;
@@ -1417,7 +1417,7 @@ static void vx900_dram_calibrate_delays(const ramctr_timing * ctrl,
 		/* Only run on first rank, remember? */
 		break;
 	}
-	vx900_dram_calibrate_recieve_delays(&delay_cal,
+	vx900_dram_calibrate_receive_delays(&delay_cal,
 					    ranks->flags[i].pins_mirrored);
 	printram("RX DQS calibration results\n");
 	dump_delay_range(delay_cal.rx_dqs);