summaryrefslogtreecommitdiff
path: root/src/soc/amd/common
diff options
context:
space:
mode:
authorFurquan Shaikh <furquan@google.com>2020-06-26 23:30:45 -0700
committerFurquan Shaikh <furquan@google.com>2020-06-30 22:35:47 +0000
commitd942c23203de5659a1cd16753ff590d53dfa7531 (patch)
tree66f2668c398d4cddacb382ea9925d462a38068f5 /src/soc/amd/common
parentaf8123cf818fc6ddd638afd4466a0e6168a2f57d (diff)
downloadcoreboot-d942c23203de5659a1cd16753ff590d53dfa7531.tar.xz
soc/amd/common/gpio: Update the macros for interrupt and pad filtering
This change renames GPIO macros as follows: 1. Pad filtering macros are renamed to GPIO_TRIGGER_ and GPIO_ACTIVE_. This determines the filtering applied on the input signal at the pad. 2. Interrupt enabling macros are renamed to GPIO_INT_ENABLE_. _INT_ is dropped from pad filtering macros because the filtering applies to the input signal irrespective of how it is routed. It is applied at the pad not only for GPIO interrupts but also for other routes i.e. SCI, SMI, etc. BUG=b:159944426 Change-Id: Id0ad770be77409aaaae4cc135945e2815ce97030 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42870 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/soc/amd/common')
-rw-r--r--src/soc/amd/common/block/include/amdblocks/gpio_banks.h43
1 files changed, 26 insertions, 17 deletions
diff --git a/src/soc/amd/common/block/include/amdblocks/gpio_banks.h b/src/soc/amd/common/block/include/amdblocks/gpio_banks.h
index 0521e4c520..a78578d5bb 100644
--- a/src/soc/amd/common/block/include/amdblocks/gpio_banks.h
+++ b/src/soc/amd/common/block/include/amdblocks/gpio_banks.h
@@ -26,18 +26,37 @@ struct soc_amd_event {
#define GPIO_PIN_IN (1 << 0) /* for byte access */
#define GPIO_PIN_OUT (1 << 6) /* for byte access */
-#define GPIO_EDGE_TRIG (0 << 8)
-#define GPIO_LEVEL_TRIG (1 << 8)
+/* Pad trigger type - Level or Edge */
+#define GPIO_TRIGGER_EDGE (0 << 8)
+#define GPIO_TRIGGER_LEVEL (1 << 8)
#define GPIO_TRIGGER_MASK (1 << 8)
+/*
+ * Pad polarity:
+ * Level trigger - High or Low
+ * Edge trigger - High (Rising), Low (Falling), Both
+ */
#define GPIO_ACTIVE_HIGH (0 << 9)
#define GPIO_ACTIVE_LOW (1 << 9)
#define GPIO_ACTIVE_BOTH (2 << 9)
#define GPIO_ACTIVE_MASK (3 << 9)
-#define GPIO_INT_STATUS_EN (1 << 11)
-#define GPIO_INT_DELIVERY_EN (1 << 12)
-#define GPIO_INTERRUPT_MASK (3 << 11)
+/*
+ * Pad trigger and polarity configuration.
+ * This determines the filtering applied on the input signal at the pad.
+ */
+#define GPIO_TRIGGER_EDGE_HIGH (GPIO_ACTIVE_HIGH | GPIO_TRIGGER_EDGE)
+#define GPIO_TRIGGER_EDGE_LOW (GPIO_ACTIVE_LOW | GPIO_TRIGGER_EDGE)
+#define GPIO_TRIGGER_BOTH_EDGES (GPIO_ACTIVE_BOTH | GPIO_TRIGGER_EDGE)
+#define GPIO_TRIGGER_LEVEL_HIGH (GPIO_ACTIVE_HIGH | GPIO_TRIGGER_LEVEL)
+#define GPIO_TRIGGER_LEVEL_LOW (GPIO_ACTIVE_LOW | GPIO_TRIGGER_LEVEL)
+
+#define GPIO_INT_ENABLE_STATUS (1 << 11)
+#define GPIO_INT_ENABLE_DELIVERY (1 << 12)
+#define GPIO_INT_ENABLE_STATUS_DELIVERY \
+ (GPIO_INT_ENABLE_STATUS | GPIO_INT_ENABLE_STATUS_DELIVERY)
+#define GPIO_INT_ENABLE_MASK (3 << 11)
+
#define GPIO_S0I3_WAKE_EN (1 << 13)
#define GPIO_S3_WAKE_EN (1 << 14)
#define GPIO_S4_S5_WAKE_EN (1 << 15)
@@ -100,12 +119,6 @@ enum {
#define AMD_GPIO_CONTROL_MASK 0x00f4ff00
#define AMD_GPIO_MUX_MASK 0x03
-/* Definitions for PAD_INT. */
-#define GPIO_INT_EDGE_HIGH (GPIO_ACTIVE_HIGH | GPIO_EDGE_TRIG)
-#define GPIO_INT_EDGE_LOW (GPIO_ACTIVE_LOW | GPIO_EDGE_TRIG)
-#define GPIO_INT_BOTH_EDGES (GPIO_ACTIVE_BOTH | GPIO_EDGE_TRIG)
-#define GPIO_INT_LEVEL_HIGH (GPIO_ACTIVE_HIGH | GPIO_LEVEL_TRIG)
-#define GPIO_INT_LEVEL_LOW (GPIO_ACTIVE_LOW | GPIO_LEVEL_TRIG)
/*
* Flags used for GPIO configuration. These provide additional information that does not go
@@ -185,10 +198,6 @@ static inline bool is_gpio_event_active_low(uint32_t flags)
#define GPIO_IN_200mS (13 | GPIO_TIMEBASE_15560uS)
#define GPIO_IN_500mS (8 | GPIO_TIMEBASE_62440uS)
-#define GPIO_EVENT_INT_STATUS GPIO_INT_STATUS_EN
-#define GPIO_EVENT_INT_DELIVER GPIO_INT_DELIVERY_EN
-#define GPIO_EVENT_INT_STATUS_DELIVER (GPIO_INT_STATUS_EN | \
- GPIO_INT_DELIVERY_EN)
#define GPIO_WAKE_S0i3 (1 << 13)
#define GPIO_WAKE_S3 (1 << 14)
#define GPIO_WAKE_S4_S5 (1 << 15)
@@ -256,13 +265,13 @@ static inline bool is_gpio_event_active_low(uint32_t flags)
.flags = 0 }
/* Auxiliary macro for legacy interrupt and wake */
#define PAD_AUX1(pull, trigger) (GPIO_PULL ## _ ## pull | \
- GPIO_INT ## _ ## trigger)
+ GPIO_TRIGGER ## _ ## trigger)
/* Legacy interrupt pad configuration */
#define PAD_INT(pin, pull, trigger, action) \
{ .gpio = (pin), \
.function = pin ## _IOMUX_ ## GPIOxx, \
.control = (PAD_AUX1(pull, trigger) | \
- GPIO_EVENT_INT ## _ ## action), \
+ GPIO_INT_ENABLE ## _ ## action), \
.flags = GPIO_FLAG_INT }
/* Auxiliary macro for SCI and SMI */
#define PAD_AUX2(trigger, flag) (GPIO_FLAG_EVENT_TRIGGER ## _ ## trigger | flag)