summaryrefslogtreecommitdiff
path: root/src/soc/amd/picasso
diff options
context:
space:
mode:
authorMarshall Dawson <marshalldawson3rd@gmail.com>2019-06-20 08:47:58 -0600
committerMartin Roth <martinroth@google.com>2019-08-09 20:46:41 +0000
commite2c24f783d78c582fb56625768b9ac424b5943c9 (patch)
treec04ace65174be7ede94de015e7115aa7053fdb5d /src/soc/amd/picasso
parent34c30565b0ef3b1ff79943768ecc2f4012bf6b86 (diff)
downloadcoreboot-e2c24f783d78c582fb56625768b9ac424b5943c9.tar.xz
soc/amd/picasso: Update i2c support
Change the stoneyridge definitions into picasso. The named 0 and 1 buses are controlled by the PSP and not directly accessible by host firmware. I2C4 operates only in slave mode so is not added to to the bus clear-after-reset sequence. The I2C controller is fundamentally the same as on Stoney Ridge so the ability to clear a potentially jammed bus is still required. Program Picasso's new pad control registers in the MISC AcpiMmio space according to the recommended settings. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ibbc5504ebc36654e28c79fe3ae17cc0d9255118f Reviewed-on: https://review.coreboot.org/c/coreboot/+/33763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
Diffstat (limited to 'src/soc/amd/picasso')
-rw-r--r--src/soc/amd/picasso/acpi/globalnvs.asl7
-rw-r--r--src/soc/amd/picasso/acpi/sb_pci0_fch.asl10
-rw-r--r--src/soc/amd/picasso/i2c.c77
-rw-r--r--src/soc/amd/picasso/include/soc/i2c.h18
-rw-r--r--src/soc/amd/picasso/include/soc/iomap.h11
-rw-r--r--src/soc/amd/picasso/include/soc/southbridge.h42
-rw-r--r--src/soc/amd/picasso/southbridge.c8
7 files changed, 97 insertions, 76 deletions
diff --git a/src/soc/amd/picasso/acpi/globalnvs.asl b/src/soc/amd/picasso/acpi/globalnvs.asl
index cc264e6f85..04e41a1b57 100644
--- a/src/soc/amd/picasso/acpi/globalnvs.asl
+++ b/src/soc/amd/picasso/acpi/globalnvs.asl
@@ -48,12 +48,11 @@ Field (GNVS, ByteAcc, NoLock, Preserve)
TPSV, 8, // 0x2F - Passive Threshold
TMAX, 8, // 0x30 - CPU Tj_max
Offset (0x34), // 0x34 - AOAC Device Enables
- , 5,
- IC0E, 1, // I2C0, 5
- IC1E, 1, // I2C1, 6
+ , 7,
IC2E, 1, // I2C2, 7
IC3E, 1, // I2C3, 8
- , 2,
+ IC4E, 1, // I2C4, 9
+ , 1,
UT0E, 1, // UART0, 11
UT1E, 1, // UART1, 12
, 2,
diff --git a/src/soc/amd/picasso/acpi/sb_pci0_fch.asl b/src/soc/amd/picasso/acpi/sb_pci0_fch.asl
index 206fdfd0e1..b9eeadb4ae 100644
--- a/src/soc/amd/picasso/acpi/sb_pci0_fch.asl
+++ b/src/soc/amd/picasso/acpi/sb_pci0_fch.asl
@@ -484,16 +484,6 @@ Method(FWAK,0, Serialized) /* FCH _WAK */
FDDC(12, 3)
}
}
- if(LEqual(\IC0E, zero)) {
- if(LNotEqual(I0TD, 0x03)) {
- FDDC(5, 3)
- }
- }
- if(LEqual(\IC1E, zero)) {
- if(LNotEqual(I1TD, 0x03)) {
- FDDC(6, 3)
- }
- }
if(LEqual(\IC2E, zero)) {
if(LNotEqual(I2TD, 0x03)) {
FDDC(7, 3)
diff --git a/src/soc/amd/picasso/i2c.c b/src/soc/amd/picasso/i2c.c
index 9fe15886d9..87866433d1 100644
--- a/src/soc/amd/picasso/i2c.c
+++ b/src/soc/amd/picasso/i2c.c
@@ -25,25 +25,21 @@
#include <soc/i2c.h>
#include "chip.h"
-#define I2C_BUS_ADDRESS(x) (I2C_BASE_ADDRESS + I2C_DEVICE_SIZE * (x))
-#define I2CA_BASE_ADDRESS (I2C_BUS_ADDRESS(0))
-#define I2CB_BASE_ADDRESS (I2C_BUS_ADDRESS(1))
-#define I2CC_BASE_ADDRESS (I2C_BUS_ADDRESS(2))
-#define I2CD_BASE_ADDRESS (I2C_BUS_ADDRESS(3))
-
/* Global to provide access to chip.c */
const char *i2c_acpi_name(const struct device *dev);
static const uintptr_t i2c_bus_address[] = {
- I2CA_BASE_ADDRESS,
- I2CB_BASE_ADDRESS,
- I2CC_BASE_ADDRESS,
- I2CD_BASE_ADDRESS,
+ APU_I2C2_BASE,
+ APU_I2C3_BASE,
+ APU_I2C4_BASE, /* slave device only */
};
uintptr_t dw_i2c_base_address(unsigned int bus)
{
- return bus < I2C_DEVICE_COUNT ? i2c_bus_address[bus] : 0;
+ if (bus < APU_I2C_MIN_BUS || bus > APU_I2C_MAX_BUS)
+ return 0;
+
+ return i2c_bus_address[bus - APU_I2C_MIN_BUS];
}
static const struct soc_amd_picasso_config *get_soc_config(void)
@@ -63,7 +59,7 @@ const struct dw_i2c_bus_config *dw_i2c_get_soc_cfg(unsigned int bus)
{
const struct soc_amd_picasso_config *config;
- if (bus >= ARRAY_SIZE(i2c_bus_address))
+ if (bus < APU_I2C_MIN_BUS || bus > APU_I2C_MAX_BUS)
return NULL;
config = get_soc_config();
@@ -76,14 +72,12 @@ const struct dw_i2c_bus_config *dw_i2c_get_soc_cfg(unsigned int bus)
const char *i2c_acpi_name(const struct device *dev)
{
switch (dev->path.mmio.addr) {
- case I2CA_BASE_ADDRESS:
- return "I2CA";
- case I2CB_BASE_ADDRESS:
- return "I2CB";
- case I2CC_BASE_ADDRESS:
+ case APU_I2C2_BASE:
return "I2CC";
- case I2CD_BASE_ADDRESS:
+ case APU_I2C3_BASE:
return "I2CD";
+ case APU_I2C4_BASE:
+ return "I2CE";
default:
return NULL;
}
@@ -92,22 +86,24 @@ const char *i2c_acpi_name(const struct device *dev)
int dw_i2c_soc_dev_to_bus(struct device *dev)
{
switch (dev->path.mmio.addr) {
- case I2CA_BASE_ADDRESS:
- return 0;
- case I2CB_BASE_ADDRESS:
- return 1;
- case I2CC_BASE_ADDRESS:
+ case APU_I2C2_BASE:
return 2;
- case I2CD_BASE_ADDRESS:
+ case APU_I2C3_BASE:
return 3;
+ case APU_I2C4_BASE:
+ return 4;
}
return -1;
}
+__weak void mainboard_i2c_override(int bus, uint32_t *pad_settings) { }
+
static void dw_i2c_soc_init(bool is_early_init)
{
size_t i;
const struct soc_amd_picasso_config *config;
+ uint32_t pad_ctrl;
+ int misc_reg;
config = get_soc_config();
@@ -120,8 +116,28 @@ static void dw_i2c_soc_init(bool is_early_init)
if (cfg->early_init != is_early_init)
continue;
- if (dw_i2c_init(i, cfg))
+ if (dw_i2c_init(i, cfg)) {
printk(BIOS_ERR, "Failed to init i2c bus %zd\n", i);
+ continue;
+ }
+
+ misc_reg = MISC_I2C0_PAD_CTRL + sizeof(uint32_t) * i;
+ pad_ctrl = misc_read32(misc_reg);
+
+ pad_ctrl &= ~I2C_PAD_CTRL_NG_MASK;
+ pad_ctrl |= I2C_PAD_CTRL_NG_NORMAL;
+
+ pad_ctrl &= ~I2C_PAD_CTRL_RX_SEL_MASK;
+ pad_ctrl |= I2C_PAD_CTRL_RX_SEL_3_3V;
+
+ pad_ctrl &= ~I2C_PAD_CTRL_FALLSLEW_MASK;
+ pad_ctrl |= cfg->speed == I2C_SPEED_STANDARD
+ ? I2C_PAD_CTRL_FALLSLEW_STD
+ : I2C_PAD_CTRL_FALLSLEW_LOW;
+ pad_ctrl |= I2C_PAD_CTRL_FALLSLEW_EN;
+
+ mainboard_i2c_override(i, &pad_ctrl);
+ misc_write32(misc_reg, pad_ctrl);
}
}
@@ -152,10 +168,9 @@ struct device_operations picasso_i2c_mmio_ops = {
* conversion of all SCL pins to input with no pull.
*/
static const struct soc_amd_gpio i2c_2_gpi[] = {
- PAD_GPI(I2C0_SCL_PIN, PULL_NONE),
- PAD_GPI(I2C1_SCL_PIN, PULL_NONE),
PAD_GPI(I2C2_SCL_PIN, PULL_NONE),
PAD_GPI(I2C3_SCL_PIN, PULL_NONE),
+ /* I2C4 is a slave device only */
};
#define saved_pins_count ARRAY_SIZE(i2c_2_gpi)
@@ -210,10 +225,6 @@ void sb_reset_i2c_slaves(void)
* needed after the writes to force the posted write to complete.
*/
for (j = 0; j < 9; j++) {
- if (control & GPIO_I2C0_SCL)
- write32((uint32_t *)GPIO_I2C0_ADDRESS, GPIO_SCL_LOW);
- if (control & GPIO_I2C1_SCL)
- write32((uint32_t *)GPIO_I2C1_ADDRESS, GPIO_SCL_LOW);
if (control & GPIO_I2C2_SCL)
write32((uint32_t *)GPIO_I2C2_ADDRESS, GPIO_SCL_LOW);
if (control & GPIO_I2C3_SCL)
@@ -222,10 +233,6 @@ void sb_reset_i2c_slaves(void)
read32((uint32_t *)GPIO_I2C3_ADDRESS); /* Flush posted write */
udelay(4); /* 4usec gets 85KHz for 1 pin, 70KHz for 4 pins */
- if (control & GPIO_I2C0_SCL)
- write32((uint32_t *)GPIO_I2C0_ADDRESS, GPIO_SCL_HIGH);
- if (control & GPIO_I2C1_SCL)
- write32((uint32_t *)GPIO_I2C1_ADDRESS, GPIO_SCL_HIGH);
if (control & GPIO_I2C2_SCL)
write32((uint32_t *)GPIO_I2C2_ADDRESS, GPIO_SCL_HIGH);
if (control & GPIO_I2C3_SCL)
diff --git a/src/soc/amd/picasso/include/soc/i2c.h b/src/soc/amd/picasso/include/soc/i2c.h
index fb9b113c8e..d129fc1f1f 100644
--- a/src/soc/amd/picasso/include/soc/i2c.h
+++ b/src/soc/amd/picasso/include/soc/i2c.h
@@ -23,24 +23,18 @@ struct soc_amd_i2c_save {
uint8_t mux_value;
};
-#define GPIO_I2C0_SCL BIT(0)
-#define GPIO_I2C1_SCL BIT(1)
-#define GPIO_I2C2_SCL BIT(2)
-#define GPIO_I2C3_SCL BIT(3)
-#define GPIO_I2C_MASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
-
-#define I2C0_SCL_PIN GPIO_145
-#define I2C1_SCL_PIN GPIO_147
+#define GPIO_I2C2_SCL BIT(2)
+#define GPIO_I2C3_SCL BIT(3)
+#define GPIO_I2C_MASK (BIT(2) | BIT(3))
+
#define I2C2_SCL_PIN GPIO_113
#define I2C3_SCL_PIN GPIO_19
-#define GPIO_I2C0_ADDRESS GPIO_BANK2_CONTROL(I2C0_SCL_PIN)
-#define GPIO_I2C1_ADDRESS GPIO_BANK2_CONTROL(I2C1_SCL_PIN)
#define GPIO_I2C2_ADDRESS GPIO_BANK1_CONTROL(I2C2_SCL_PIN)
#define GPIO_I2C3_ADDRESS GPIO_BANK0_CONTROL(I2C3_SCL_PIN)
+#define GPIO_SCL_HIGH 0
+#define GPIO_SCL_LOW GPIO_OUTPUT_ENABLE
-#define I2C0_SCL_PIN_IOMUX_GPIOxx GPIO_145_IOMUX_GPIOxx
-#define I2C1_SCL_PIN_IOMUX_GPIOxx GPIO_147_IOMUX_GPIOxx
#define I2C2_SCL_PIN_IOMUX_GPIOxx GPIO_113_IOMUX_GPIOxx
#define I2C3_SCL_PIN_IOMUX_GPIOxx GPIO_19_IOMUX_GPIOxx
diff --git a/src/soc/amd/picasso/include/soc/iomap.h b/src/soc/amd/picasso/include/soc/iomap.h
index 4e11cbd4c8..ad0e7c4609 100644
--- a/src/soc/amd/picasso/include/soc/iomap.h
+++ b/src/soc/amd/picasso/include/soc/iomap.h
@@ -44,9 +44,16 @@
#define ALINK_AHB_ADDRESS 0xfedc0000
/* I2C fixed address */
-#define I2C_BASE_ADDRESS 0xfedc2000
+#define APU_I2C2_BASE 0xfedc4000
+#define APU_I2C3_BASE 0xfedc5000
+#define APU_I2C4_BASE 0xfedc6000
+#define APU_I2C_MIN_BUS 2
+#define APU_I2C_MAX_BUS 4
+#define APU_I2C_BLOCK_SIZE 0x1000
+#define I2C_BASE_ADDRESS APU_I2C2_BASE
#define I2C_DEVICE_SIZE 0x00001000
-#define I2C_DEVICE_COUNT 4
+#define I2C_DEVICE_COUNT 3
+
#if CONFIG(HPET_ADDRESS_OVERRIDE)
#error HPET address override is not allowed and must be fixed at 0xfed00000
diff --git a/src/soc/amd/picasso/include/soc/southbridge.h b/src/soc/amd/picasso/include/soc/southbridge.h
index 8c96aa7f99..803c638164 100644
--- a/src/soc/amd/picasso/include/soc/southbridge.h
+++ b/src/soc/amd/picasso/include/soc/southbridge.h
@@ -178,13 +178,38 @@
#define BP_X48M0_OUTPUT_EN BIT(2) /* 1=En, unlike Hudson, Kern */
#define OSCOUT1_CLK_OUTPUT_ENB BIT(2) /* 0 = Enabled, 1 = Disabled */
#define OSCOUT2_CLK_OUTPUT_ENB BIT(7) /* 0 = Enabled, 1 = Disabled */
+#define MISC_I2C0_PAD_CTRL 0xd8
+#define MISC_I2C1_PAD_CTRL 0xdc
+#define MISC_I2C2_PAD_CTRL 0xe0
+#define MISC_I2C3_PAD_CTRL 0xe4
+#define I2C_PAD_CTRL_NG_MASK (BIT(0) + BIT(1) + BIT(2) + BIT(3))
+#define I2C_PAD_CTRL_NG_NORMAL 0xc
+#define I2C_PAD_CTRL_RX_SEL_MASK (BIT(4) + BIT(5))
+#define I2C_PAD_CTRL_RX_SHIFT 4
+#define I2C_PAD_CTRL_RX_SEL_OFF (0 << I2C_PAD_CTRL_RX_SHIFT)
+#define I2C_PAD_CTRL_RX_SEL_3_3V (1 << I2C_PAD_CTRL_RX_SHIFT)
+#define I2C_PAD_CTRL_RX_SEL_1_8V (3 << I2C_PAD_CTRL_RX_SHIFT)
+#define I2C_PAD_CTRL_PULLDOWN_EN BIT(6)
+#define I2C_PAD_CTRL_FALLSLEW_MASK (BIT(7) + BIT(8))
+#define I2C_PAD_CTRL_FALLSLEW_SHIFT 7
+#define I2C_PAD_CTRL_FALLSLEW_STD (0 << I2C_PAD_CTRL_FALLSLEW_SHIFT)
+#define I2C_PAD_CTRL_FALLSLEW_LOW (1 << I2C_PAD_CTRL_FALLSLEW_SHIFT)
+#define I2C_PAD_CTRL_FALLSLEW_EN BIT(9)
+#define I2C_PAD_CTRL_SPIKE_RC_EN BIT(10)
+#define I2C_PAD_CTRL_SPIKE_RC_SEL BIT(11) /* 0 = 50ns, 1 = 20ns */
+#define I2C_PAD_CTRL_CAP_DOWN BIT(12)
+#define I2C_PAD_CTRL_CAP_UP BIT(13)
+#define I2C_PAD_CTRL_RES_DOWN BIT(14)
+#define I2C_PAD_CTRL_RES_UP BIT(15)
+#define I2C_PAD_CTRL_BIOS_CRT_EN BIT(16)
+#define I2C_PAD_CTRL_SPARE0 BIT(17)
+#define I2C_PAD_CTRL_SPARE1 BIT(18)
/* FCH AOAC Registers 0xfed81e00 */
#define FCH_AOAC_D3_CONTROL_CLK_GEN 0x40
-#define FCH_AOAC_D3_CONTROL_I2C0 0x4a
-#define FCH_AOAC_D3_CONTROL_I2C1 0x4c
#define FCH_AOAC_D3_CONTROL_I2C2 0x4e
#define FCH_AOAC_D3_CONTROL_I2C3 0x50
+#define FCH_AOAC_D3_CONTROL_I2C4 0x52
#define FCH_AOAC_D3_CONTROL_UART0 0x56
#define FCH_AOAC_D3_CONTROL_UART1 0x58
#define FCH_AOAC_D3_CONTROL_AMBA 0x62
@@ -198,10 +223,9 @@
#define FCH_AOAC_IS_SW_CONTROL BIT(7)
#define FCH_AOAC_D3_STATE_CLK_GEN 0x41
-#define FCH_AOAC_D3_STATE_I2C0 0x4b
-#define FCH_AOAC_D3_STATE_I2C1 0x4d
#define FCH_AOAC_D3_STATE_I2C2 0x4f
#define FCH_AOAC_D3_STATE_I2C3 0x51
+#define FCH_AOAC_D3_STATE_I2C4 0x53
#define FCH_AOAC_D3_STATE_UART0 0x57
#define FCH_AOAC_D3_STATE_UART1 0x59
#define FCH_AOAC_D3_STATE_AMBA 0x63
@@ -289,12 +313,11 @@ struct picasso_aoac {
};
typedef struct aoac_devs {
- unsigned int :5;
- unsigned int ic0e:1; /* 5: I2C0 */
- unsigned int ic1e:1; /* 6: I2C1 */
+ unsigned int :7;
unsigned int ic2e:1; /* 7: I2C2 */
unsigned int ic3e:1; /* 8: I2C3 */
- unsigned int :2;
+ unsigned int ic4e:1; /* 9: I2C4 */
+ unsigned int :1;
unsigned int ut0e:1; /* 11: UART0 */
unsigned int ut1e:1; /* 12: UART1 */
unsigned int :2;
@@ -370,4 +393,7 @@ void i2c_soc_early_init(void);
/* Initialize all the i2c buses that are not marked with early init. */
void i2c_soc_init(void);
+/* Allow the board to change the default I2C pad configuration */
+void mainboard_i2c_override(int bus, uint32_t *pad_settings);
+
#endif /* __PICASSO_SB_H__ */
diff --git a/src/soc/amd/picasso/southbridge.c b/src/soc/amd/picasso/southbridge.c
index e1d16b7e3c..582034a6a7 100644
--- a/src/soc/amd/picasso/southbridge.c
+++ b/src/soc/amd/picasso/southbridge.c
@@ -46,10 +46,9 @@ const static struct picasso_aoac aoac_devs[] = {
{ (FCH_AOAC_D3_CONTROL_UART0 + CONFIG_UART_FOR_CONSOLE * 2),
(FCH_AOAC_D3_STATE_UART0 + CONFIG_UART_FOR_CONSOLE * 2) },
{ FCH_AOAC_D3_CONTROL_AMBA, FCH_AOAC_D3_STATE_AMBA },
- { FCH_AOAC_D3_CONTROL_I2C0, FCH_AOAC_D3_STATE_I2C0 },
- { FCH_AOAC_D3_CONTROL_I2C1, FCH_AOAC_D3_STATE_I2C1 },
{ FCH_AOAC_D3_CONTROL_I2C2, FCH_AOAC_D3_STATE_I2C2 },
- { FCH_AOAC_D3_CONTROL_I2C3, FCH_AOAC_D3_STATE_I2C3 }
+ { FCH_AOAC_D3_CONTROL_I2C3, FCH_AOAC_D3_STATE_I2C3 },
+ { FCH_AOAC_D3_CONTROL_I2C4, FCH_AOAC_D3_STATE_I2C4 }
};
/*
@@ -514,10 +513,9 @@ static void set_sb_final_nvs(void)
if (gnvs == NULL)
return;
- gnvs->aoac.ic0e = is_aoac_device_enabled(FCH_AOAC_D3_STATE_I2C0);
- gnvs->aoac.ic1e = is_aoac_device_enabled(FCH_AOAC_D3_STATE_I2C1);
gnvs->aoac.ic2e = is_aoac_device_enabled(FCH_AOAC_D3_STATE_I2C2);
gnvs->aoac.ic3e = is_aoac_device_enabled(FCH_AOAC_D3_STATE_I2C3);
+ gnvs->aoac.ic4e = is_aoac_device_enabled(FCH_AOAC_D3_STATE_I2C4);
gnvs->aoac.ut0e = is_aoac_device_enabled(FCH_AOAC_D3_STATE_UART0);
gnvs->aoac.ut1e = is_aoac_device_enabled(FCH_AOAC_D3_STATE_UART1);
/* Rely on these being in sync with devicetree */