diff options
author | Daniel Kurtz <djkurtz@chromium.org> | 2019-01-14 14:45:47 -0700 |
---|---|---|
committer | Martin Roth <martinroth@google.com> | 2019-01-16 18:20:36 +0000 |
commit | b82afce18aff24b6e5e3b73a67a6533cc4865a26 (patch) | |
tree | 772e5e50b47e354b7e6ab4e3ef8172dbb0100a96 /src/soc/amd/stoneyridge | |
parent | ac1a5a82181c3276963807c4a11ab5edb5eb52f7 (diff) | |
download | coreboot-b82afce18aff24b6e5e3b73a67a6533cc4865a26.tar.xz |
soc/amd/stoneyridge/gpio: Configure debounce for irq gpios
FT4 has a strange property where whenever the debounce registers for any
one gpio are changed, the FT4 disables interrupt propagation for ALL
gpio irqs for ~4ms.
In other words, if an edge interrupt of one gpio happens exactly during
this debounce-irq-off window immediately following the configuration of
another gpio, the interrupt will be lost.
It is quite difficult to deal with this in the kernel, since during kernel
boot time, drivers & devices are probed asynchronously, meaning it may
happen that an already loaded driver may miss an interrupt when some
later driver is being probed and configuring its gpio interrupt.
To eliminate this possibility, we pre-configure the debounce registers in
ram stage for all gpios that will be used as irqs later by the kernel
using the same configuration as used by the kernel, as per this table:
IRQ Debounce
Edge Remove Glitch
Level High Preserve Low Glitch
Level Low Preserve High Glitch
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
BUG=b:113880780
BRANCH=none
TEST=Reboot stress test grunt (>100 times); no messages in dmesg like:
tpm tpm0: Timeout waiting for TPM ready
Change-Id: I94c7ecfb14e5bb209b3598e10287c80eb19da25b
Reviewed-on: https://review.coreboot.org/c/30921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Diffstat (limited to 'src/soc/amd/stoneyridge')
-rw-r--r-- | src/soc/amd/stoneyridge/gpio.c | 35 | ||||
-rw-r--r-- | src/soc/amd/stoneyridge/include/soc/gpio.h | 2 |
2 files changed, 36 insertions, 1 deletions
diff --git a/src/soc/amd/stoneyridge/gpio.c b/src/soc/amd/stoneyridge/gpio.c index 955cc6a0cc..bca8f5d925 100644 --- a/src/soc/amd/stoneyridge/gpio.c +++ b/src/soc/amd/stoneyridge/gpio.c @@ -219,12 +219,41 @@ uint16_t gpio_acpi_pin(gpio_t gpio) return gpio; } +/* + * Returns the debounce type corresponding to a given interrupt type. + * + * This matches what the linux kernel will set during gpio configuration: + * + * Interrupt Debounce + * Edge Remove Glitch + * Level High Preserve Low Glitch + * Level Low Preserve High Glitch + */ +static uint32_t gpio_irq_debounce(uint32_t flag) +{ + uint32_t trigger; + + trigger = flag & FLAGS_TRIGGER_MASK; + switch (trigger) { + case GPIO_TRIGGER_LEVEL_LOW: + return GPIO_IN_PRESERVE_HIGH_GLITCH; + case GPIO_TRIGGER_LEVEL_HIGH: + return GPIO_IN_PRESERVE_LOW_GLITCH; + case GPIO_TRIGGER_EDGE_LOW: + return GPIO_IN_REMOVE_GLITCH; + case GPIO_TRIGGER_EDGE_HIGH: + return GPIO_IN_REMOVE_GLITCH; + default: + return GPIO_IN_NO_DEBOUNCE; + } +} + void sb_program_gpios(const struct soc_amd_gpio *gpio_list_ptr, size_t size) { uint8_t *mux_ptr; uint32_t *gpio_ptr; uint32_t control, control_flags, edge_level, direction; - uint32_t mask, bit_edge, bit_level; + uint32_t mask, bit_edge, bit_level, debounce; uint8_t mux, index, gpio; int gevent_num; @@ -273,6 +302,10 @@ void sb_program_gpios(const struct soc_amd_gpio *gpio_list_ptr, size_t size) case GPIO_SCI_FLAG: mem_read_write32(gpio_ptr, control, INT_SCI_SMI_MASK); + /* Always set debounce type for SCI gpio */ + debounce = gpio_irq_debounce(control_flags); + mem_read_write32(gpio_ptr, debounce, + GPIO_DEBOUNCE_MASK); get_sci_config_bits(control_flags, &bit_edge, &bit_level); edge_level |= bit_edge << gevent_num; diff --git a/src/soc/amd/stoneyridge/include/soc/gpio.h b/src/soc/amd/stoneyridge/include/soc/gpio.h index 04eda4934e..422ee57ab3 100644 --- a/src/soc/amd/stoneyridge/include/soc/gpio.h +++ b/src/soc/amd/stoneyridge/include/soc/gpio.h @@ -450,9 +450,11 @@ enum { #define INT_SCI_SMI_MASK 0x00f40000 #define IN_GLITCH_SHIFT 5 +#define DEBOUNCE_NONE 0 #define GLITCH_LOW 1 #define GLITCH_HIGH 2 #define GLITCH_NONE 3 +#define GPIO_IN_NO_DEBOUNCE (DEBOUNCE_NONE << IN_GLITCH_SHIFT) #define GPIO_IN_PRESERVE_LOW_GLITCH (GLITCH_LOW << IN_GLITCH_SHIFT) #define GPIO_IN_PRESERVE_HIGH_GLITCH (GLITCH_HIGH << IN_GLITCH_SHIFT) #define GPIO_IN_REMOVE_GLITCH (GLITCH_NONE << IN_GLITCH_SHIFT) |