soc/intel/baytrail: Use sb/intel/common/spi.c

This common implementation is compatible.

Change-Id: I2023bb7522ec40f1d9911cb5c57d7d66e4cefa6d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>

4 files changed, 1 insertions, 611 deletions

diff --git a/src/soc/intel/baytrail/Kconfig b/src/soc/intel/baytrail/Kconfig
index fac14cbd3b..e96b53d321 100644
--- a/src/soc/intel/baytrail/Kconfig
+++ b/src/soc/intel/baytrail/Kconfig
@@ -18,6 +18,7 @@ config CPU_SPECIFIC_OPTIONS
 	select SUPPORT_CPU_UCODE_IN_CBFS
 	select HAVE_SMI_HANDLER
 	select SOUTHBRIDGE_INTEL_COMMON_RESET
+	select SOUTHBRIDGE_INTEL_COMMON_SPI_SILVERMONT
 	select NO_FIXED_XIP_ROM_SIZE
 	select PARALLEL_MP
 	select PCIEXP_ASPM
diff --git a/src/soc/intel/baytrail/Makefile.inc b/src/soc/intel/baytrail/Makefile.inc
index d9663462c6..2c49c63454 100644
--- a/src/soc/intel/baytrail/Makefile.inc
+++ b/src/soc/intel/baytrail/Makefile.inc
@@ -12,12 +12,10 @@ subdirs-y += ../../../cpu/intel/common
 romstage-y += iosf.c
 romstage-y += memmap.c
 romstage-y += pmutil.c
-romstage-y += spi.c
 romstage-y += tsc_freq.c
 
 postcar-y += iosf.c
 postcar-y += memmap.c
-postcar-y += spi.c
 postcar-y += tsc_freq.c
 
 ramstage-y += acpi.c
@@ -43,7 +41,6 @@ ramstage-y += scc.c
 ramstage-y += sd.c
 ramstage-y += smm.c
 ramstage-y += southcluster.c
-ramstage-y += spi.c
 ramstage-y += tsc_freq.c
 ramstage-y += xhci.c
 ramstage-$(CONFIG_ELOG) += elog.c
@@ -52,7 +49,6 @@ ramstage-$(CONFIG_HAVE_REFCODE_BLOB) += refcode.c
 smm-y += iosf.c
 smm-y += pmutil.c
 smm-y += smihandler.c
-smm-y += spi.c
 smm-y += tsc_freq.c
 
 # Remove as ramstage gets fleshed out
diff --git a/src/soc/intel/baytrail/include/soc/spi.h b/src/soc/intel/baytrail/include/soc/spi.h
index 063dd7fd3a..1ac0b59e56 100644
--- a/src/soc/intel/baytrail/include/soc/spi.h
+++ b/src/soc/intel/baytrail/include/soc/spi.h
@@ -20,14 +20,7 @@
 
 /* These registers live behind SPI_BASE_ADDRESS. */
 #define HSFSTS				0x04
-#define FDATA0				0x10
 # define FLOCKDN			(0x1 << 15)
-#define SSFS				0x90
-# define CYCLE_DONE_STATUS		(0x1 << 2)
-# define FLASH_CYCLE_ERROR		(0x1 << 3)
-#define SSFC				0x91
-# define SPI_CYCLE_GO			(0x1 << 1)
-# define DATA_CYCLE			(0x1 << 14)
 #define PREOP				0x94
 #define OPTYPE				0x96
 #define OPMENU0				0x98
diff --git a/src/soc/intel/baytrail/spi.c b/src/soc/intel/baytrail/spi.c
deleted file mode 100644
index e43900258e..0000000000
--- a/src/soc/intel/baytrail/spi.c
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * Copyright (c) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/* This file is derived from the flashrom project. */
-
-#include <stdint.h>
-#include <stdlib.h>
-#include <bootstate.h>
-#include <delay.h>
-#include <device/mmio.h>
-#include <device/pci_ops.h>
-#include <commonlib/helpers.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <spi_flash.h>
-#include <spi-generic.h>
-
-#include <soc/lpc.h>
-#include <soc/pci_devs.h>
-
-typedef struct spi_slave ich_spi_slave;
-
-static int ichspi_lock = 0;
-
-typedef struct ich9_spi_regs {
-	uint32_t bfpr;
-	uint16_t hsfs;
-	uint16_t hsfc;
-	uint32_t faddr;
-	uint32_t _reserved0;
-	uint32_t fdata[16];
-	uint32_t frap;
-	uint32_t freg[5];
-	uint32_t _reserved1[3];
-	uint32_t pr[5];
-	uint32_t _reserved2[2];
-	uint8_t ssfs;
-	uint8_t ssfc[3];
-	uint16_t preop;
-	uint16_t optype;
-	uint8_t opmenu[8];
-	uint32_t bbar;
-	uint8_t _reserved3[12];
-	uint32_t fdoc;
-	uint32_t fdod;
-	uint8_t _reserved4[8];
-	uint32_t afc;
-	uint32_t lvscc;
-	uint32_t uvscc;
-	uint8_t _reserved5[4];
-	uint32_t fpb;
-	uint8_t _reserved6[28];
-	uint32_t srdl;
-	uint32_t srdc;
-	uint32_t srd;
-} __packed ich9_spi_regs;
-
-typedef struct ich_spi_controller {
-	int locked;
-
-	uint8_t *opmenu;
-	int menubytes;
-	uint16_t *preop;
-	uint16_t *optype;
-	uint32_t *addr;
-	uint8_t *data;
-	unsigned int databytes;
-	uint8_t *status;
-	uint16_t *control;
-	uint32_t *bbar;
-} ich_spi_controller;
-
-static ich_spi_controller cntlr;
-
-enum {
-	SPIS_SCIP =		0x0001,
-	SPIS_GRANT =		0x0002,
-	SPIS_CDS =		0x0004,
-	SPIS_FCERR =		0x0008,
-	SSFS_AEL =		0x0010,
-	SPIS_LOCK =		0x8000,
-	SPIS_RESERVED_MASK =	0x7ff0,
-	SSFS_RESERVED_MASK =	0x7fe2
-};
-
-enum {
-	SPIC_SCGO =		0x000002,
-	SPIC_ACS =		0x000004,
-	SPIC_SPOP =		0x000008,
-	SPIC_DBC =		0x003f00,
-	SPIC_DS =		0x004000,
-	SPIC_SME =		0x008000,
-	SSFC_SCF_MASK =		0x070000,
-	SSFC_RESERVED =		0xf80000
-};
-
-enum {
-	HSFS_FDONE =		0x0001,
-	HSFS_FCERR =		0x0002,
-	HSFS_AEL =		0x0004,
-	HSFS_BERASE_MASK =	0x0018,
-	HSFS_BERASE_SHIFT =	3,
-	HSFS_SCIP =		0x0020,
-	HSFS_FDOPSS =		0x2000,
-	HSFS_FDV =		0x4000,
-	HSFS_FLOCKDN =		0x8000
-};
-
-enum {
-	HSFC_FGO =		0x0001,
-	HSFC_FCYCLE_MASK =	0x0006,
-	HSFC_FCYCLE_SHIFT =	1,
-	HSFC_FDBC_MASK =	0x3f00,
-	HSFC_FDBC_SHIFT =	8,
-	HSFC_FSMIE =		0x8000
-};
-
-enum {
-	SPI_OPCODE_TYPE_READ_NO_ADDRESS =	0,
-	SPI_OPCODE_TYPE_WRITE_NO_ADDRESS =	1,
-	SPI_OPCODE_TYPE_READ_WITH_ADDRESS =	2,
-	SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS =	3
-};
-
-#if CONFIG(DEBUG_SPI_FLASH)
-
-static u8 readb_(const void *addr)
-{
-	u8 v = read8((unsigned long)addr);
-	printk(BIOS_DEBUG, "read %2.2x from %4.4x\n",
-	       v, ((unsigned int) addr & 0xffff) - 0xf020);
-	return v;
-}
-
-static u16 readw_(const void *addr)
-{
-	u16 v = read16((unsigned long)addr);
-	printk(BIOS_DEBUG, "read %4.4x from %4.4x\n",
-	       v, ((unsigned int) addr & 0xffff) - 0xf020);
-	return v;
-}
-
-static u32 readl_(const void *addr)
-{
-	u32 v = read32((unsigned long)addr);
-	printk(BIOS_DEBUG, "read %8.8x from %4.4x\n",
-	       v, ((unsigned int) addr & 0xffff) - 0xf020);
-	return v;
-}
-
-static void writeb_(u8 b, void *addr)
-{
-	write8(addr, b);
-	printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n",
-	       b, ((unsigned int) addr & 0xffff) - 0xf020);
-}
-
-static void writew_(u16 b, void *addr)
-{
-	write16(addr, b);
-	printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n",
-	       b, ((unsigned int) addr & 0xffff) - 0xf020);
-}
-
-static void writel_(u32 b, void *addr)
-{
-	write32(addr, b);
-	printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n",
-	       b, ((unsigned int) addr & 0xffff) - 0xf020);
-}
-
-#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled  vvv NOT enabled */
-
-#define readb_(a) read8(a)
-#define readw_(a) read16(a)
-#define readl_(a) read32(a)
-#define writeb_(val, addr) write8(addr, val)
-#define writew_(val, addr) write16(addr, val)
-#define writel_(val, addr) write32(addr, val)
-
-#endif  /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */
-
-static void write_reg(const void *value, void *dest, uint32_t size)
-{
-	const uint8_t *bvalue = value;
-	uint8_t *bdest = dest;
-
-	while (size >= 4) {
-		writel_(*(const uint32_t *)bvalue, bdest);
-		bdest += 4; bvalue += 4; size -= 4;
-	}
-	while (size) {
-		writeb_(*bvalue, bdest);
-		bdest++; bvalue++; size--;
-	}
-}
-
-static void read_reg(const void *src, void *value, uint32_t size)
-{
-	const uint8_t *bsrc = src;
-	uint8_t *bvalue = value;
-
-	while (size >= 4) {
-		*(uint32_t *)bvalue = readl_(bsrc);
-		bsrc += 4; bvalue += 4; size -= 4;
-	}
-	while (size) {
-		*bvalue = readb_(bsrc);
-		bsrc++; bvalue++; size--;
-	}
-}
-
-static void ich_set_bbar(uint32_t minaddr)
-{
-	const uint32_t bbar_mask = 0x00ffff00;
-	uint32_t ichspi_bbar;
-
-	minaddr &= bbar_mask;
-	ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask;
-	ichspi_bbar |= minaddr;
-	writel_(ichspi_bbar, cntlr.bbar);
-}
-
-static ich9_spi_regs *spi_regs(void)
-{
-	uint32_t sbase;
-
-#ifdef __SIMPLE_DEVICE__
-	pci_devfn_t dev = PCI_DEV(0, LPC_DEV, LPC_FUNC);
-#else
-	struct device *dev = pcidev_on_root(LPC_DEV, LPC_FUNC);
-#endif
-	sbase = pci_read_config32(dev, SBASE);
-	sbase &= ~0x1ff;
-
-	return (void *)sbase;
-}
-
-#define MENU_BYTES member_size(struct ich9_spi_regs, opmenu)
-
-void spi_init(void)
-{
-	ich9_spi_regs *ich9_spi = spi_regs();
-
-	ichspi_lock = readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN;
-	cntlr.opmenu = ich9_spi->opmenu;
-	cntlr.menubytes = sizeof(ich9_spi->opmenu);
-	cntlr.optype = &ich9_spi->optype;
-	cntlr.addr = &ich9_spi->faddr;
-	cntlr.data = (uint8_t *)ich9_spi->fdata;
-	cntlr.databytes = sizeof(ich9_spi->fdata);
-	cntlr.status = &ich9_spi->ssfs;
-	cntlr.control = (uint16_t *)ich9_spi->ssfc;
-	cntlr.bbar = &ich9_spi->bbar;
-	cntlr.preop = &ich9_spi->preop;
-	ich_set_bbar(0);
-}
-
-static void spi_init_cb(void *unused)
-{
-	spi_init();
-}
-
-BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, spi_init_cb, NULL);
-
-typedef struct spi_transaction {
-	const uint8_t *out;
-	uint32_t bytesout;
-	uint8_t *in;
-	uint32_t bytesin;
-	uint8_t type;
-	uint8_t opcode;
-	uint32_t offset;
-} spi_transaction;
-
-static inline void spi_use_out(spi_transaction *trans, unsigned int bytes)
-{
-	trans->out += bytes;
-	trans->bytesout -= bytes;
-}
-
-static inline void spi_use_in(spi_transaction *trans, unsigned int bytes)
-{
-	trans->in += bytes;
-	trans->bytesin -= bytes;
-}
-
-static void spi_setup_type(spi_transaction *trans)
-{
-	trans->type = 0xFF;
-
-	/* Try to guess spi type from read/write sizes. */
-	if (trans->bytesin == 0) {
-		if (trans->bytesout > 4)
-			/*
-			 * If bytesin = 0 and bytesout > 4, we presume this is
-			 * a write data operation, which is accompanied by an
-			 * address.
-			 */
-			trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS;
-		else
-			trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS;
-		return;
-	}
-
-	if (trans->bytesout == 1) { /* and bytesin is > 0 */
-		trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS;
-		return;
-	}
-
-	if (trans->bytesout == 4) { /* and bytesin is > 0 */
-		trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
-	}
-
-	/* Fast read command is called with 5 bytes instead of 4 */
-	if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) {
-		trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
-		--trans->bytesout;
-	}
-}
-
-static int spi_setup_opcode(spi_transaction *trans)
-{
-	uint16_t optypes;
-	uint8_t opmenu[MENU_BYTES];
-
-	trans->opcode = trans->out[0];
-	spi_use_out(trans, 1);
-	if (!ichspi_lock) {
-		/* The lock is off, so just use index 0. */
-		writeb_(trans->opcode, cntlr.opmenu);
-		optypes = readw_(cntlr.optype);
-		optypes = (optypes & 0xfffc) | (trans->type & 0x3);
-		writew_(optypes, cntlr.optype);
-		return 0;
-	} else {
-		/* The lock is on. See if what we need is on the menu. */
-		uint8_t optype;
-		uint16_t opcode_index;
-
-		/* Write Enable is handled as atomic prefix */
-		if (trans->opcode == SPI_OPCODE_WREN)
-			return 0;
-
-		read_reg(cntlr.opmenu, opmenu, sizeof(opmenu));
-		for (opcode_index = 0; opcode_index < ARRAY_SIZE(opmenu); opcode_index++) {
-			if (opmenu[opcode_index] == trans->opcode)
-				break;
-		}
-
-		if (opcode_index == ARRAY_SIZE(opmenu)) {
-			printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n",
-				trans->opcode);
-			return -1;
-		}
-
-		optypes = readw_(cntlr.optype);
-		optype = (optypes >> (opcode_index * 2)) & 0x3;
-		if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
-			optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
-			trans->bytesout >= 3) {
-			/* We guessed wrong earlier. Fix it up. */
-			trans->type = optype;
-		}
-		if (optype != trans->type) {
-			printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n",
-				optype);
-			return -1;
-		}
-		return opcode_index;
-	}
-}
-
-static int spi_setup_offset(spi_transaction *trans)
-{
-	/* Separate the SPI address and data. */
-	switch (trans->type) {
-	case SPI_OPCODE_TYPE_READ_NO_ADDRESS:
-	case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS:
-		return 0;
-	case SPI_OPCODE_TYPE_READ_WITH_ADDRESS:
-	case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS:
-		trans->offset = ((uint32_t)trans->out[0] << 16) |
-				((uint32_t)trans->out[1] << 8) |
-				((uint32_t)trans->out[2] << 0);
-		spi_use_out(trans, 3);
-		return 1;
-	default:
-		printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type);
-		return -1;
-	}
-}
-
-/*
- * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set
- * below is True) or 0. In case the wait was for the bit(s) to set - write
- * those bits back, which would cause resetting them.
- *
- * Return the last read status value on success or -1 on failure.
- */
-static int ich_status_poll(u16 bitmask, int wait_til_set)
-{
-	int timeout = 40000; /* This will result in 400 ms */
-	u16 status = 0;
-
-	while (timeout--) {
-		status = readw_(cntlr.status);
-		if (wait_til_set ^ ((status & bitmask) == 0)) {
-			if (wait_til_set)
-				writew_((status & bitmask), cntlr.status);
-			return status;
-		}
-		udelay(10);
-	}
-
-	printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n",
-		status, bitmask);
-	return -1;
-}
-
-static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,
-		    size_t bytesout, void *din, size_t bytesin)
-{
-	uint16_t control;
-	int16_t opcode_index;
-	int with_address;
-	int status;
-
-	spi_transaction trans = {
-		dout, bytesout,
-		din, bytesin,
-		0xff, 0xff, 0
-	};
-
-	/* There has to always at least be an opcode. */
-	if (!bytesout || !dout) {
-		printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n");
-		return -1;
-	}
-	/* Make sure if we read something we have a place to put it. */
-	if (bytesin != 0 && !din) {
-		printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n");
-		return -1;
-	}
-
-	if (ich_status_poll(SPIS_SCIP, 0) == -1)
-		return -1;
-
-	writew_(SPIS_CDS | SPIS_FCERR, cntlr.status);
-
-	spi_setup_type(&trans);
-	if ((opcode_index = spi_setup_opcode(&trans)) < 0)
-		return -1;
-	if ((with_address = spi_setup_offset(&trans)) < 0)
-		return -1;
-
-	if (trans.opcode == SPI_OPCODE_WREN) {
-		/*
-		 * Treat Write Enable as Atomic Pre-Op if possible
-		 * in order to prevent the Management Engine from
-		 * issuing a transaction between WREN and DATA.
-		 */
-		if (!ichspi_lock)
-			writew_(trans.opcode, cntlr.preop);
-		return 0;
-	}
-
-	/* Preset control fields */
-	control = SPIC_SCGO | ((opcode_index & 0x07) << 4);
-
-	/* Issue atomic preop cycle if needed */
-	if (readw_(cntlr.preop))
-		control |= SPIC_ACS;
-
-	if (!trans.bytesout && !trans.bytesin) {
-		/* SPI addresses are 24 bit only */
-		if (with_address)
-			writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
-
-		/*
-		 * This is a 'no data' command (like Write Enable), its
-		 * bytesout size was 1, decremented to zero while executing
-		 * spi_setup_opcode() above. Tell the chip to send the
-		 * command.
-		 */
-		writew_(control, cntlr.control);
-
-		/* wait for the result */
-		status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
-		if (status == -1)
-			return -1;
-
-		if (status & SPIS_FCERR) {
-			printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n");
-			return -1;
-		}
-
-		return 0;
-	}
-
-	/*
-	 * Check if this is a write command attempting to transfer more bytes
-	 * than the controller can handle. Iterations for writes are not
-	 * supported here because each SPI write command needs to be preceded
-	 * and followed by other SPI commands, and this sequence is controlled
-	 * by the SPI chip driver.
-	 */
-	if (trans.bytesout > cntlr.databytes) {
-		printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use"
-		     " spi_crop_chunk()?\n");
-		return -1;
-	}
-
-	/*
-	 * Read or write up to databytes bytes at a time until everything has
-	 * been sent.
-	 */
-	while (trans.bytesout || trans.bytesin) {
-		uint32_t data_length;
-
-		/* SPI addresses are 24 bit only */
-		writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
-
-		if (trans.bytesout)
-			data_length = min(trans.bytesout, cntlr.databytes);
-		else
-			data_length = min(trans.bytesin, cntlr.databytes);
-
-		/* Program data into FDATA0 to N */
-		if (trans.bytesout) {
-			write_reg(trans.out, cntlr.data, data_length);
-			spi_use_out(&trans, data_length);
-			if (with_address)
-				trans.offset += data_length;
-		}
-
-		/* Add proper control fields' values */
-		control &= ~((cntlr.databytes - 1) << 8);
-		control |= SPIC_DS;
-		control |= (data_length - 1) << 8;
-
-		/* write it */
-		writew_(control, cntlr.control);
-
-		/* Wait for Cycle Done Status or Flash Cycle Error. */
-		status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
-		if (status == -1)
-			return -1;
-
-		if (status & SPIS_FCERR) {
-			printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n");
-			return -1;
-		}
-
-		if (trans.bytesin) {
-			read_reg(cntlr.data, trans.in, data_length);
-			spi_use_in(&trans, data_length);
-			if (with_address)
-				trans.offset += data_length;
-		}
-	}
-
-	/* Clear atomic preop now that xfer is done */
-	writew_(0, cntlr.preop);
-
-	return 0;
-}
-
-static int xfer_vectors(const struct spi_slave *slave,
-			struct spi_op vectors[], size_t count)
-{
-	return spi_flash_vector_helper(slave, vectors, count, spi_ctrlr_xfer);
-}
-
-static const struct spi_ctrlr spi_ctrlr = {
-	.xfer_vector = xfer_vectors,
-	.max_xfer_size = member_size(ich9_spi_regs, fdata),
-};
-
-const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = {
-	{
-		.ctrlr = &spi_ctrlr,
-		.bus_start = 0,
-		.bus_end = 0,
-	},
-};
-
-const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);