soc/intel/icelake: Do initial SoC commit

Clone entirely from Cannonlake
commit id: 3487095304dbbbf66de86f8bce0e40b7acb3ea27

List of changes on top off initial cannonlake clone
1. Replace "Cannonlake" with "Icelake"
2. Replace "cnl" with "icl"
3. Replace "cnp" with "icp"
4. Rename structrue based on Cannonlake with Icelake
5. Remove and clean below files
   5.a. All NHLT blobs and related files.
   5.b. remove cnl_memcfg_init.c file, will be added later.
   5.c. Remove vr_config.c, this is WIP.
   5.d. Clean up upd override in fsp_params.c,
	will be added once FSP available.
   5.e Remove CNL-H based GPIO configuartion.

Ice Lake specific changes will follow in subsequent patches.

Change-Id: I756fa7275c4190aebc0695f14484498aaf5662a5
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/29162
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 82 insertions, 0 deletions

diff --git a/src/soc/intel/icelake/graphics.c b/src/soc/intel/icelake/graphics.c
new file mode 100644
index 0000000000..1c22f49a7b
--- /dev/null
+++ b/src/soc/intel/icelake/graphics.c
@@ -0,0 +1,82 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/acpigen.h>
+#include <console/console.h>
+#include <fsp/util.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <drivers/intel/gma/i915_reg.h>
+#include <drivers/intel/gma/opregion.h>
+#include <intelblocks/graphics.h>
+
+uintptr_t fsp_soc_get_igd_bar(void)
+{
+	return graphics_get_memory_base();
+}
+
+void graphics_soc_init(struct device *dev)
+{
+	uint32_t ddi_buf_ctl;
+
+	/*
+	 * Enable DDI-A (eDP) 4-lane operation if the link is not up yet.
+	 * This will allow the kernel to use 4-lane eDP links properly
+	 * if the VBIOS or GOP driver do not execute.
+	 */
+	ddi_buf_ctl = graphics_gtt_read(DDI_BUF_CTL_A);
+	if (!acpi_is_wakeup_s3() && !(ddi_buf_ctl & DDI_BUF_CTL_ENABLE)) {
+		ddi_buf_ctl |= (DDI_A_4_LANES | DDI_INIT_DISPLAY_DETECTED |
+				DDI_BUF_IS_IDLE);
+		graphics_gtt_write(DDI_BUF_CTL_A, ddi_buf_ctl);
+	}
+
+	/*
+	 * GFX PEIM module inside FSP binary is taking care of graphics
+	 * initialization based on INTEL_GMA_ADD_VBT Kconfig
+	 * option and input VBT file. Hence no need to load/execute legacy VGA
+	 * OpROM in order to initialize GFX.
+	 *
+	 * In case of non-FSP solution, SoC need to select VGA_ROM_RUN
+	 * Kconfig to perform GFX initialization through VGA OpRom.
+	 */
+	if (IS_ENABLED(CONFIG_INTEL_GMA_ADD_VBT))
+		return;
+
+	/* IGD needs to Bus Master */
+	uint32_t reg32 = pci_read_config32(dev, PCI_COMMAND);
+	reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
+	pci_write_config32(dev, PCI_COMMAND, reg32);
+
+	/* Initialize PCI device, load/execute BIOS Option ROM */
+	pci_dev_init(dev);
+}
+
+uintptr_t graphics_soc_write_acpi_opregion(struct device *device,
+		uintptr_t current, struct acpi_rsdp *rsdp)
+{
+	igd_opregion_t *opregion;
+
+	printk(BIOS_DEBUG, "ACPI:    * IGD OpRegion\n");
+	opregion = (igd_opregion_t *)current;
+
+	if (intel_gma_init_igd_opregion(opregion) != CB_SUCCESS)
+		return current;
+
+	current += sizeof(igd_opregion_t);
+
+	return acpi_align_current(current);
+}