summaryrefslogtreecommitdiff
path: root/src/soc/intel/quark
diff options
context:
space:
mode:
authorLee Leahy <leroy.p.leahy@intel.com>2017-01-03 16:00:15 -0800
committerLee Leahy <leroy.p.leahy@intel.com>2017-03-07 17:37:08 +0100
commit16568c7535c7532b7ee9f1ce2231dabd518921e3 (patch)
treefe47777e0d8d2d3af44d5aa2d70cd1e85624cb49 /src/soc/intel/quark
parent2ea12e5ce05fb67b2eab30882c167551230b3a11 (diff)
downloadcoreboot-16568c7535c7532b7ee9f1ce2231dabd518921e3.tar.xz
soc/intel/quark: Fix I2C driver
Fix the following issues: * A raw read is described by a single read segment, don't assert. * Support reads longer than the FIFO size. * Support writes longer than the FIFO size. * Use the 400 KHz clock by default. * Remove the error displays since vboot device polling generates errors. TEST=Build and run on Galileo Gen2 Change-Id: I421ebb23989aa283b5182dcae4f8099c9ec16eee Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18029 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
Diffstat (limited to 'src/soc/intel/quark')
-rw-r--r--src/soc/intel/quark/i2c.c282
1 files changed, 204 insertions, 78 deletions
diff --git a/src/soc/intel/quark/i2c.c b/src/soc/intel/quark/i2c.c
index 4675295d4c..3988bbe836 100644
--- a/src/soc/intel/quark/i2c.c
+++ b/src/soc/intel/quark/i2c.c
@@ -1,7 +1,7 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2016 Intel Corporation.
+ * Copyright (C) 2016-2017 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,6 +23,7 @@
#include <soc/i2c.h>
#include <soc/ramstage.h>
#include <soc/reg_access.h>
+#include <timer.h>
static void i2c_disable(I2C_REGS *regs)
{
@@ -46,17 +47,144 @@ static void i2c_disable(I2C_REGS *regs)
status = regs->ic_clr_intr;
}
-int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count)
+static int platform_i2c_write(uint32_t restart, uint8_t *tx_buffer, int length,
+ uint32_t stop, uint8_t *rx_buffer, struct stopwatch *timeout)
+{
+ int bytes_transferred;
+ uint32_t cmd;
+ I2C_REGS *regs;
+ uint32_t status;
+
+ ASSERT(tx_buffer != NULL);
+ ASSERT(timeout != NULL);
+ regs = get_i2c_address();
+
+ /* Fill the FIFO with the write operation */
+ bytes_transferred = 0;
+ do {
+ status = regs->ic_raw_intr_stat;
+
+ /* Check for errors */
+ if (status & (IC_INTR_RX_OVER | IC_INTR_RX_UNDER
+ | IC_INTR_TX_ABRT | IC_INTR_TX_OVER)) {
+ i2c_disable(regs);
+ return -1;
+ }
+
+ /* Check for timeout */
+ if (stopwatch_expired(timeout))
+ return -1;
+
+ /* Receive any available data */
+ status = regs->ic_status;
+ if (rx_buffer != NULL) {
+ while (status & IC_STATUS_RFNE) {
+ *rx_buffer++ = (uint8_t)regs->ic_data_cmd;
+ bytes_transferred++;
+ status = regs->ic_status;
+ }
+ }
+
+ /* Determine if space is available in the FIFO */
+ if (status & IC_STATUS_TFNF) {
+ /* End of the transaction? */
+ cmd = IC_DATA_CMD_WRITE | *tx_buffer++ | restart;
+ if (length == 1)
+ cmd |= stop;
+ restart = 0;
+
+ /* Place a data byte into the FIFO */
+ regs->ic_data_cmd = cmd;
+ length--;
+ bytes_transferred++;
+ } else
+ udelay(1);
+ } while (length > 0);
+ return bytes_transferred;
+}
+
+static int platform_i2c_read(uint32_t restart, uint8_t *rx_buffer, int length,
+ uint32_t stop, struct stopwatch *timeout)
+{
+ int bytes_transferred;
+ uint32_t cmd;
+ int fifo_bytes;
+ uint8_t junk;
+ I2C_REGS *regs;
+ uint32_t status;
+
+ ASSERT(rx_buffer != NULL);
+ ASSERT(timeout != NULL);
+ regs = get_i2c_address();
+
+ /* Empty the FIFO */
+ status = regs->ic_status;
+ while (status & IC_STATUS_RFNE) {
+ junk = (uint8_t)regs->ic_data_cmd;
+ status = regs->ic_status;
+ }
+
+ /* Fill the FIFO with read commands */
+ fifo_bytes = min(length, 16);
+ bytes_transferred = 0;
+ while (length > 0) {
+ status = regs->ic_raw_intr_stat;
+
+ /* Check for errors */
+ if (status & (IC_INTR_RX_OVER | IC_INTR_RX_UNDER
+ | IC_INTR_TX_ABRT | IC_INTR_TX_OVER)) {
+ i2c_disable(regs);
+ return -1;
+ }
+
+ /* Check for timeout */
+ if (stopwatch_expired(timeout))
+ return -1;
+
+ /* Receive any available data */
+ status = regs->ic_status;
+ if (status & IC_STATUS_RFNE) {
+ /* Save the next data byte, removed from the RX FIFO */
+ *rx_buffer++ = (uint8_t)regs->ic_data_cmd;
+ bytes_transferred++;
+ }
+
+ if ((status & IC_STATUS_TFNF)
+ || ((status & IC_STATUS_RFNE) && (fifo_bytes > 0))) {
+ /* End of the transaction? */
+ cmd = IC_DATA_CMD_READ | restart;
+ if (length == 1)
+ cmd |= stop;
+ restart = 0;
+
+ /* Place a read command into the TX FIFO */
+ regs->ic_data_cmd = cmd;
+ if (fifo_bytes > 0)
+ fifo_bytes--;
+ length--;
+ } else
+ udelay(1);
+ }
+ return bytes_transferred;
+}
+
+int platform_i2c_transfer(unsigned int bus, struct i2c_seg *segment,
+ int seg_count)
{
- uint8_t *buffer;
int bytes_transferred;
uint8_t chip;
uint32_t cmd;
+ int data_bytes;
int length;
- int read_length;
I2C_REGS *regs;
+ uint32_t restart;
+ uint8_t *rx_buffer;
uint32_t status;
- uint32_t timeout;
+ uint32_t stop;
+ struct stopwatch timeout;
+ int total_bytes;
+ uint8_t *tx_buffer;
+ int tx_bytes;
regs = get_i2c_address();
@@ -64,9 +192,8 @@ int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count)
i2c_disable(regs);
/* Set the slave address */
- ASSERT (count > 0);
- ASSERT (segments != NULL);
- ASSERT (segments->read == 0);
+ ASSERT(seg_count > 0);
+ ASSERT(segment != NULL);
/* Clear the start and stop detection */
status = regs->ic_clr_start_det;
@@ -75,12 +202,12 @@ int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count)
/* Set addressing mode to 7-bit and fast mode */
cmd = regs->ic_con;
cmd &= ~(IC_CON_10B | IC_CON_SPEED);
- cmd |= IC_CON_RESTART_EN | IC_CON_7B | IC_CON_SPEED_100_KHz
+ cmd |= IC_CON_RESTART_EN | IC_CON_7B | IC_CON_SPEED_400_KHz
| IC_CON_MASTER_MODE;
regs->ic_con = cmd;
/* Set the target chip address */
- chip = segments->chip;
+ chip = segment->chip;
regs->ic_tar = chip;
/* Enable the I2C controller */
@@ -92,86 +219,85 @@ int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count)
status = regs->ic_clr_tx_over;
status = regs->ic_clr_tx_abrt;
+ /* Start the timeout */
+ stopwatch_init_msecs_expire(&timeout, 1000);
+
/* Process each of the segments */
+ total_bytes = 0;
+ tx_bytes = 0;
bytes_transferred = 0;
- read_length = 0;
- buffer = NULL;
- while (count-- > 0) {
- buffer = segments->buf;
- length = segments->len;
- ASSERT (buffer != NULL);
- ASSERT (length >= 1);
- ASSERT (segments->chip == chip);
-
- if (segments->read) {
+ rx_buffer = NULL;
+ restart = 0;
+ while (seg_count-- > 0) {
+ length = segment->len;
+ total_bytes += length;
+ ASSERT(segment->buf != NULL);
+ ASSERT(length >= 1);
+ ASSERT(segment->chip == chip);
+
+ /* Determine if this is the last segment of the transaction */
+ stop = (seg_count == 0) ? IC_DATA_CMD_STOP : 0;
+
+ /* Fill the FIFO with the necessary command bytes */
+ if (segment->read) {
/* Place read commands into the FIFO */
- read_length = length;
- while (length > 0) {
- /* Send stop bit after last byte */
- cmd = IC_DATA_CMD_READ;
- if ((count == 0) && (length == 1))
- cmd |= IC_DATA_CMD_STOP;
-
- /* Place read command in transmit FIFO */
- regs->ic_data_cmd = cmd;
- length--;
- }
+ rx_buffer = segment->buf;
+ data_bytes = platform_i2c_read(restart, rx_buffer,
+ length, stop, &timeout);
+
+ /* Return any detected error */
+ if (data_bytes < 0)
+ return data_bytes;
+ bytes_transferred += data_bytes;
} else {
/* Write the data into the FIFO */
- while (length > 0) {
- /* End of the transaction? */
- cmd = IC_DATA_CMD_WRITE | *buffer++;
- if ((count == 0) && (length == 1))
- cmd |= IC_DATA_CMD_STOP;
-
- /* Place a data byte into the FIFO */
- regs->ic_data_cmd = cmd;
- length--;
- bytes_transferred++;
- }
+ tx_buffer = segment->buf;
+ tx_bytes += length;
+ data_bytes = platform_i2c_write(restart, tx_buffer,
+ length, stop, rx_buffer, &timeout);
+
+ /* Return any detected error */
+ if (data_bytes < 0)
+ return data_bytes;
+ bytes_transferred += data_bytes;
}
- segments++;
+ segment++;
+ restart = IC_DATA_CMD_RESTART;
}
/* Wait for the end of the transaction */
- timeout = 1 * 1000 * 1000;
+ if (rx_buffer != NULL)
+ rx_buffer += bytes_transferred - tx_bytes;
do {
- status = regs->ic_raw_intr_stat;
- if (status & IC_INTR_STOP_DET)
- break;
- if ((status & (IC_INTR_RX_OVER | IC_INTR_RX_UNDER
- | IC_INTR_TX_ABRT | IC_INTR_TX_OVER))
- || (timeout == 0)) {
- if (timeout == 0)
- printk (BIOS_ERR,
- "ERROR - I2C stop bit not received!\n");
- if (status & IC_INTR_RX_OVER)
- printk (BIOS_ERR,
- "ERROR - I2C receive overrun!\n");
- if (status & IC_INTR_RX_UNDER)
- printk (BIOS_ERR,
- "ERROR - I2C receive underrun!\n");
- if (status & IC_INTR_TX_ABRT)
- printk (BIOS_ERR,
- "ERROR - I2C transmit abort!\n");
- if (status & IC_INTR_TX_OVER)
- printk (BIOS_ERR,
- "ERROR - I2C transmit overrun!\n");
- i2c_disable(regs);
- return -1;
+ /* Receive any available data */
+ status = regs->ic_status;
+ if ((rx_buffer != NULL) && (status & IC_STATUS_RFNE)) {
+ *rx_buffer++ = (uint8_t)regs->ic_data_cmd;
+ bytes_transferred++;
+ } else {
+ status = regs->ic_raw_intr_stat;
+ if ((total_bytes == bytes_transferred)
+ && (status & IC_INTR_STOP_DET))
+ break;
+
+ /* Check for errors */
+ if (status & (IC_INTR_RX_OVER | IC_INTR_RX_UNDER
+ | IC_INTR_TX_ABRT | IC_INTR_TX_OVER)) {
+ i2c_disable(regs);
+ return -1;
+ }
+
+ /* Check for timeout */
+ if (stopwatch_expired(&timeout))
+ return -1;
+
+ /* Delay for a while */
+ udelay(1);
}
- timeout--;
- udelay(1);
} while (1);
+ i2c_disable(regs);
+ regs->ic_tar = 0;
- /* Finish reading the data bytes */
- while (read_length > 0) {
- status = regs->ic_status;
- *buffer++ = (uint8_t)regs->ic_data_cmd;
- read_length--;
- bytes_transferred++;
- status = regs->ic_status;
- }
-
+ /* Return the number of bytes transferred */
return bytes_transferred;
}