intel/sch: Merge northbridge and southbridge in src/soc

Change-Id: I6ea9b9d2353c0d767c837e6d629b45f23b306f6e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14599
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>

1 files changed, 337 insertions, 0 deletions

diff --git a/src/soc/intel/sch/smi.c b/src/soc/intel/sch/smi.c
new file mode 100644
index 0000000000..24628e52e6
--- /dev/null
+++ b/src/soc/intel/sch/smi.c
@@ -0,0 +1,337 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/smm.h>
+#include <cpu/cpu.h>
+#include <string.h>
+#include "chip.h"
+#include "sch.h"
+
+extern unsigned char _binary_smm_start;
+extern unsigned char _binary_smm_size;
+
+/* I945 */
+#define SMRAM		0x9d
+#define   D_OPEN	(1 << 6)
+#define   D_CLS		(1 << 5)
+#define   D_LCK		(1 << 4)
+#define   G_SMRAME	(1 << 3)
+#define   C_BASE_SEG	((0 << 2) | (1 << 1) | (0 << 0))
+
+/* ICH7 */
+#define PM1_STS		0x00
+#define PM1_EN		0x02
+#define PM1_CNT		0x04
+#define PM1_TMR		0x08
+#define PROC_CNT	0x10
+#define LV2		0x14
+#define LV3		0x15
+#define LV4		0x16
+#define PM2_CNT		0x20 // mobile only
+#define GPE0_STS	0x28
+#define GPE0_EN		0x2c
+#define SMI_EN		0x30
+#define   EL_SMI_EN	 (1 << 25) // Intel Quick Resume Technology
+#define   INTEL_USB2_EN	 (1 << 18) // Intel-Specific USB2 SMI logic
+#define   LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic
+#define   PERIODIC_EN	 (1 << 14) // SMI on PERIODIC_STS in SMI_STS
+#define   TCO_EN	 (1 << 13) // Enable TCO Logic (BIOSWE et al)
+#define   MCSMI_EN	 (1 << 11) // Trap microcontroller range access
+#define   BIOS_RLS	 (1 <<  7) // asserts SCI on bit set
+#define   SWSMI_TMR_EN	 (1 <<  6) // start software smi timer on bit set
+#define   APMC_EN	 (1 <<  5) // Writes to APM_CNT cause SMI#
+#define   SLP_SMI_EN	 (1 <<  4) // Write to SLP_EN in PM1_CNT asserts SMI#
+#define   LEGACY_USB_EN  (1 <<  3) // Legacy USB circuit SMI logic
+#define   BIOS_EN	 (1 <<  2) // Assert SMI# on setting GBL_RLS bit
+#define   EOS		 (1 <<  1) // End of SMI (deassert SMI#)
+#define   GBL_SMI_EN	 (1 <<  0) // SMI# generation at all?
+#define SMI_STS		0x34
+#define ALT_GP_SMI_EN	0x38
+#define ALT_GP_SMI_STS	0x3a
+#define GPE_CNTL	0x42
+#define DEVACT_STS	0x44
+#define SS_CNT		0x50
+#define C3_RES		0x54
+
+/* While we read PMBASE dynamically in case it changed, let's
+ * initialize it with a sane value
+ */
+
+static u16 pmbase = DEFAULT_PMBASE;
+/**
+ * @brief read and clear PM1_STS
+ * @return PM1_STS register
+ */
+static u16 reset_pm1_status(void)
+{
+	u16 reg16;
+
+	reg16 = inw(pmbase + PM1_STS);
+	/* set status bits are cleared by writing 1 to them */
+	outw(reg16, pmbase + PM1_STS);
+
+	return reg16;
+}
+
+static void dump_pm1_status(u16 pm1_sts)
+{
+	printk(BIOS_DEBUG, "PM1_STS: ");
+	if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK ");
+	if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK ");
+	if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR ");
+	if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC ");
+	if (pm1_sts & (1 <<  8)) printk(BIOS_DEBUG, "PWRBTN ");
+	if (pm1_sts & (1 <<  5)) printk(BIOS_DEBUG, "GBL ");
+	if (pm1_sts & (1 <<  4)) printk(BIOS_DEBUG, "BM ");
+	if (pm1_sts & (1 <<  0)) printk(BIOS_DEBUG, "TMROF ");
+	printk(BIOS_DEBUG, "\n");
+}
+
+/**
+ * @brief read and clear SMI_STS
+ * @return SMI_STS register
+ */
+static u32 reset_smi_status(void)
+{
+	u32 reg32;
+
+	reg32 = inl(pmbase + SMI_STS);
+	/* set status bits are cleared by writing 1 to them */
+	outl(reg32, pmbase + SMI_STS);
+
+	return reg32;
+}
+
+static void dump_smi_status(u32 smi_sts)
+{
+	printk(BIOS_DEBUG, "SMI_STS: ");
+	if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
+	if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
+	if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
+	if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
+	if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
+	if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
+	if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
+	if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
+	if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
+	if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
+	if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
+	if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
+	if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
+	if (smi_sts & (1 <<  9)) printk(BIOS_DEBUG, "GPE0 ");
+	if (smi_sts & (1 <<  8)) printk(BIOS_DEBUG, "PM1 ");
+	if (smi_sts & (1 <<  6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
+	if (smi_sts & (1 <<  5)) printk(BIOS_DEBUG, "APM ");
+	if (smi_sts & (1 <<  4)) printk(BIOS_DEBUG, "SLP_SMI ");
+	if (smi_sts & (1 <<  3)) printk(BIOS_DEBUG, "LEGACY_USB ");
+	if (smi_sts & (1 <<  2)) printk(BIOS_DEBUG, "BIOS ");
+	printk(BIOS_DEBUG, "\n");
+}
+
+/**
+ * @brief read and clear GPE0_STS
+ * @return GPE0_STS register
+ */
+static u32 reset_gpe0_status(void)
+{
+	u32 reg32;
+
+	reg32 = inl(pmbase + GPE0_STS);
+	/* set status bits are cleared by writing 1 to them */
+	outl(reg32, pmbase + GPE0_STS);
+
+	return reg32;
+}
+
+static void dump_gpe0_status(u32 gpe0_sts)
+{
+	int i;
+	printk(BIOS_DEBUG, "GPE0_STS: ");
+	for (i=31; i>= 16; i--) {
+		if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
+	}
+	if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
+	if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
+	if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
+	if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
+	if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
+	if (gpe0_sts & (1 <<  9)) printk(BIOS_DEBUG, "PCI_EXP ");
+	if (gpe0_sts & (1 <<  8)) printk(BIOS_DEBUG, "RI ");
+	if (gpe0_sts & (1 <<  7)) printk(BIOS_DEBUG, "SMB_WAK ");
+	if (gpe0_sts & (1 <<  6)) printk(BIOS_DEBUG, "TCO_SCI ");
+	if (gpe0_sts & (1 <<  5)) printk(BIOS_DEBUG, "AC97 ");
+	if (gpe0_sts & (1 <<  4)) printk(BIOS_DEBUG, "USB2 ");
+	if (gpe0_sts & (1 <<  3)) printk(BIOS_DEBUG, "USB1 ");
+	if (gpe0_sts & (1 <<  2)) printk(BIOS_DEBUG, "HOT_PLUG ");
+	if (gpe0_sts & (1 <<  0)) printk(BIOS_DEBUG, "THRM ");
+	printk(BIOS_DEBUG, "\n");
+}
+
+/**
+ * @brief read and clear TCOx_STS
+ * @return TCOx_STS registers
+ */
+static u32 reset_tco_status(void)
+{
+	u32 tcobase = pmbase + 0x60;
+	u32 reg32;
+
+	reg32 = inl(tcobase + 0x04);
+	/* set status bits are cleared by writing 1 to them */
+	outl(reg32 & ~(1<<18), tcobase + 0x04); //  Don't clear BOOT_STS before SECOND_TO_STS
+	if (reg32 & (1 << 18))
+		outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
+
+	return reg32;
+}
+
+static void dump_tco_status(u32 tco_sts)
+{
+	printk(BIOS_DEBUG, "TCO_STS: ");
+	if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
+	if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
+	if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
+	if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
+	if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
+	if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
+	if (tco_sts & (1 <<  9)) printk(BIOS_DEBUG, "DMISCI ");
+	if (tco_sts & (1 <<  8)) printk(BIOS_DEBUG, "BIOSWR ");
+	if (tco_sts & (1 <<  7)) printk(BIOS_DEBUG, "NEWCENTURY ");
+	if (tco_sts & (1 <<  3)) printk(BIOS_DEBUG, "TIMEOUT ");
+	if (tco_sts & (1 <<  2)) printk(BIOS_DEBUG, "TCO_INT ");
+	if (tco_sts & (1 <<  1)) printk(BIOS_DEBUG, "SW_TCO ");
+	if (tco_sts & (1 <<  0)) printk(BIOS_DEBUG, "NMI2SMI ");
+	printk(BIOS_DEBUG, "\n");
+}
+
+/**
+ * @brief Set the EOS bit
+ */
+static void smi_set_eos(void)
+{
+// FIXME: disabled until SMM actually works
+#if 0
+	u8 reg8;
+
+	reg8 = inb(pmbase + SMI_EN);
+	reg8 |= EOS;
+	outb(reg8, pmbase + SMI_EN);
+#endif
+}
+
+extern uint8_t smm_relocation_start, smm_relocation_end;
+
+static void smm_relocate(void)
+{
+	u32 smi_en;
+
+	printk(BIOS_DEBUG, "Initializing SMM handler...");
+
+	pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), 0x40) & 0xfffc;
+	printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
+
+	smi_en = inl(pmbase + SMI_EN);
+	if (smi_en & APMC_EN) {
+		printk(BIOS_INFO, "SMI# handler already enabled?\n");
+		return;
+	}
+
+	/* copy the SMM relocation code */
+	memcpy((void *)0x38000, &smm_relocation_start,
+			&smm_relocation_end - &smm_relocation_start);
+
+	printk(BIOS_DEBUG, "\n");
+	dump_smi_status(reset_smi_status());
+	dump_pm1_status(reset_pm1_status());
+	dump_gpe0_status(reset_gpe0_status());
+	dump_tco_status(reset_tco_status());
+
+	/* Enable SMI generation:
+	 *  - on TCO events
+	 *  - on APMC writes (io 0xb2)
+	 *  - on writes to SLP_EN (sleep states)
+	 *  - on writes to GBL_RLS (bios commands)
+	 * No SMIs:
+	 *  - on microcontroller writes (io 0x62/0x66)
+	 */
+	outl(smi_en | (TCO_EN | APMC_EN | SLP_SMI_EN | BIOS_EN |
+				EOS | GBL_SMI_EN), pmbase + SMI_EN);
+
+	/**
+	 * There are several methods of raising a controlled SMI# via
+	 * software, among them:
+	 *  - Writes to io 0xb2 (APMC)
+	 *  - Writes to the Local Apic ICR with Delivery mode SMI.
+	 *
+	 * Using the local apic is a bit more tricky. According to
+	 * AMD Family 11 Processor BKDG no destination shorthand must be
+	 * used.
+	 * The whole SMM initialization is quite a bit hardware specific, so
+	 * I'm not too worried about the better of the methods at the moment
+	 */
+
+	/* raise an SMI interrupt */
+	printk(BIOS_SPEW, "  ... raise SMI#\n");
+	outb(0x00, 0xb2);
+}
+
+static void smm_install(void)
+{
+	/* enable the SMM memory window */
+	pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
+				D_OPEN | G_SMRAME | C_BASE_SEG);
+
+	/* copy the real SMM handler */
+	memcpy((void *)0xa0000, &_binary_smm_start, (size_t)&_binary_smm_size);
+	wbinvd();
+
+	/* close the SMM memory window and enable normal SMM */
+	pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
+			G_SMRAME | C_BASE_SEG);
+}
+
+void smm_init(void)
+{
+	smm_relocate();
+	smm_install();
+	smi_set_eos();
+}
+
+void smm_lock(void)
+{
+	/* LOCK the SMM memory window and enable normal SMM.
+	 * After running this function, only a full reset can
+	 * make the SMM registers writable again.
+	 */
+	printk(BIOS_DEBUG, "Locking SMM.\n");
+	pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
+			D_LCK | G_SMRAME | C_BASE_SEG);
+}
+
+void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
+{
+	/* The GDT or coreboot table is going to live here. But a long time
+	 * after we relocated the GNVS, so this is not troublesome.
+	 */
+	*(u32 *)0x500 = (u32)gnvs;
+	*(u32 *)0x504 = (u32)tcg;
+	*(u32 *)0x508 = (u32)smi1;
+	outb(0xea, 0xb2);
+}