soc/intel/skylake: Set low maximum temperature threshold for Thermal Device

PMC logic shuts down the thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold in case Dynamic Thermal Shutdown in
S0ix is enabled.

BUG=b:69110373
BRANCH=none
TEST=Ensure Thermal Device(B0: D20: F2) TSPM offset 0x1c[LTT (8:0)]
value is 0xFA.

Change-Id: I94d09a28bf1ea07a53cfa04c54752358bafca610
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>

1 files changed, 100 insertions, 0 deletions

diff --git a/src/soc/intel/skylake/thermal.c b/src/soc/intel/skylake/thermal.c
new file mode 100644
index 0000000000..01a4f26259
--- /dev/null
+++ b/src/soc/intel/skylake/thermal.c
@@ -0,0 +1,100 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/io.h>
+#include <chip.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <soc/iomap.h>
+#include <soc/pci_devs.h>
+#include <soc/thermal.h>
+
+#define MAX_TRIP_TEMP 205
+#define DEFAULT_TRIP_TEMP 50
+
+static void *pch_thermal_get_bar(struct device *dev)
+{
+	uintptr_t bar;
+
+	bar = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
+	/*
+	 * Bits [31:12] are the base address as per EDS for Thermal Device,
+	 * Don't care about [11:0] bits
+	 */
+	return (void *)(bar & ~PCI_BASE_ADDRESS_MEM_ATTR_MASK);
+}
+
+static void pch_thermal_set_bar(struct device *dev, uintptr_t tempbar)
+{
+	uint8_t pcireg;
+
+	/* Assign Resources to Thermal Device */
+	/* Clear BIT 1-2 of Command Register */
+	pcireg = pci_read_config8(dev, PCI_COMMAND);
+	pcireg &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+	pci_write_config8(dev, PCI_COMMAND, pcireg);
+
+	/* Program Temporary BAR for Thermal Device */
+	pci_write_config32(dev, PCI_BASE_ADDRESS_0, tempbar);
+	pci_write_config32(dev, PCI_BASE_ADDRESS_1, 0x0);
+
+	/* Enable Bus Master and MMIO Space */
+	pcireg = pci_read_config8(dev, PCI_COMMAND);
+	pcireg |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_write_config8(dev, PCI_COMMAND, pcireg);
+}
+
+/* PCH Low Temp Threshold (LTT) */
+static uint16_t pch_get_ltt_value(struct device *dev)
+{
+	static struct soc_intel_skylake_config *config;
+	uint16_t ltt_value;
+	uint16_t trip_temp = DEFAULT_TRIP_TEMP;
+
+	config = dev->chip_info;
+
+	if (config->pch_trip_temp)
+		trip_temp = config->pch_trip_temp;
+
+	if (trip_temp > MAX_TRIP_TEMP)
+		die("Input PCH temp trip is higher than allowed range!");
+
+	/* Trip Point Temp = (LTT / 2 - 50 degree C) */
+	ltt_value = (trip_temp + 50) * 2;
+
+	return ltt_value;
+}
+
+/* Enable thermal sensor power management */
+void pch_thermal_configuration(void)
+{
+	uint16_t reg16;
+	struct device *dev = PCH_DEV_THERMAL;
+	void *thermalbar = pch_thermal_get_bar(dev);
+
+	/* Use default pre-ram bar */
+	if (!thermalbar) {
+		pch_thermal_set_bar(dev, THERMAL_BASE_ADDRESS);
+		thermalbar = (void *)THERMAL_BASE_ADDRESS;
+	}
+
+	/* Set Low Temp Threshold (LTT) at TSPM offset 0x1c[8:0] */
+	reg16 = read16(thermalbar + THERMAL_SENSOR_POWER_MANAGEMENT);
+	reg16 &= ~0x1ff;
+	/* Low Temp Threshold (LTT) */
+	reg16 |= pch_get_ltt_value(dev);
+	write16(thermalbar + THERMAL_SENSOR_POWER_MANAGEMENT, reg16);
+}