skylake: Prepare GPE for use in bootblock

Export the pmc_gpe_init() function from pmc.c to pmutil.c
so it can be used in bootblock, and then call it from there
to initialize any GPEs for use in firmware.

BUG=chrome-os-partner:58666
TEST=test working GPE as TPM interrupt on skylake board

Change-Id: I6b4f7d0aa689db42dc455075f84ab5694e8c9661
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17135
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>

5 files changed, 56 insertions, 39 deletions

diff --git a/src/soc/intel/skylake/bootblock/pch.c b/src/soc/intel/skylake/bootblock/pch.c
index 57b5fedb24..371dd63685 100644
--- a/src/soc/intel/skylake/bootblock/pch.c
+++ b/src/soc/intel/skylake/bootblock/pch.c
@@ -301,6 +301,9 @@ void pch_early_init(void)
 	/* Program SMBUS_BASE_ADDRESS and Enable it */
 	enable_smbus();
 
+	/* Set up GPE configuration */
+	pmc_gpe_init();
+
 	soc_config_rtc();
 
 	enable_heci();
diff --git a/src/soc/intel/skylake/include/soc/pci_devs.h b/src/soc/intel/skylake/include/soc/pci_devs.h
index 476e2c6a56..974f1d8e19 100644
--- a/src/soc/intel/skylake/include/soc/pci_devs.h
+++ b/src/soc/intel/skylake/include/soc/pci_devs.h
@@ -23,7 +23,7 @@
 #define _SA_DEVFN(slot)		PCI_DEVFN(SA_DEV_SLOT_ ## slot, 0)
 #define _PCH_DEVFN(slot, func)	PCI_DEVFN(PCH_DEV_SLOT_ ## slot, func)
 
-#if ENV_RAMSTAGE
+#if ENV_RAMSTAGE && !defined(__SIMPLE_DEVICE__)
 #include <device/device.h>
 #include <device/pci_def.h>
 #define _SA_DEV(slot)		dev_find_slot(0, _SA_DEVFN(slot))
diff --git a/src/soc/intel/skylake/include/soc/pm.h b/src/soc/intel/skylake/include/soc/pm.h
index 235ad898e0..ede3efb982 100644
--- a/src/soc/intel/skylake/include/soc/pm.h
+++ b/src/soc/intel/skylake/include/soc/pm.h
@@ -186,6 +186,9 @@ uint16_t smbus_tco_regs(void);
 /* Set the DISB after DRAM init */
 void pmc_set_disb(void);
 
+/* Initialize GPEs */
+void pmc_gpe_init(void);
+
 static inline int deep_s3_enabled(void)
 {
 	uint32_t deep_s3_pol;
diff --git a/src/soc/intel/skylake/pmc.c b/src/soc/intel/skylake/pmc.c
index fd04287f37..23a289b2bd 100644
--- a/src/soc/intel/skylake/pmc.c
+++ b/src/soc/intel/skylake/pmc.c
@@ -129,42 +129,6 @@ static void pch_rtc_init(void)
 		cmos_init(rtc_failed);
 }
 
-static void pmc_gpe_init(config_t *config)
-{
-	uint8_t *pmc_regs;
-	uint32_t gpio_cfg;
-	uint32_t gpio_cfg_reg;
-	const uint32_t gpio_cfg_mask =
-		(GPE0_DWX_MASK << GPE0_DW0_SHIFT) |
-		(GPE0_DWX_MASK << GPE0_DW1_SHIFT) |
-		(GPE0_DWX_MASK << GPE0_DW2_SHIFT);
-
-	pmc_regs = pmc_mmio_regs();
-	gpio_cfg = 0;
-
-	/* Route the GPIOs to the GPE0 block. Determine that all values
-	 * are different, and if they aren't use the reset values. */
-	if (config->gpe0_dw0 == config->gpe0_dw1 ||
-		config->gpe0_dw1 == config->gpe0_dw2) {
-		printk(BIOS_INFO, "PMC: Using default GPE route.\n");
-		gpio_cfg = read32(pmc_regs + GPIO_CFG);
-	} else {
-		gpio_cfg |= (uint32_t)config->gpe0_dw0 << GPE0_DW0_SHIFT;
-		gpio_cfg |= (uint32_t)config->gpe0_dw1 << GPE0_DW1_SHIFT;
-		gpio_cfg |= (uint32_t)config->gpe0_dw2 << GPE0_DW2_SHIFT;
-	}
-	gpio_cfg_reg = read32(pmc_regs + GPIO_CFG) & ~gpio_cfg_mask;
-	gpio_cfg_reg |= gpio_cfg & gpio_cfg_mask;
-	write32(pmc_regs + GPIO_CFG, gpio_cfg_reg);
-
-	/* Set the routes in the GPIO communities as well. */
-	gpio_route_gpe(gpio_cfg_reg >> GPE0_DW0_SHIFT);
-
-	/* Set GPE enables based on devictree. */
-	enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2,
-			config->gpe0_en_3, config->gpe0_en_4);
-}
-
 static void pch_power_options(void)
 {
 	u16 reg16;
@@ -172,7 +136,6 @@ static void pch_power_options(void)
 	/*PMC Controller Device 0x1F, Func 02*/
 	device_t dev = PCH_DEV_PMC;
 	/* Get the chip configuration */
-	config_t *config = dev->chip_info;
 	int pwr_on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
 
 	/*
@@ -207,7 +170,7 @@ static void pch_power_options(void)
 	printk(BIOS_INFO, "Set power %s after power failure.\n", state);
 
 	/* Set up GPE configuration. */
-	pmc_gpe_init(config);
+	pmc_gpe_init();
 }
 
 static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
diff --git a/src/soc/intel/skylake/pmutil.c b/src/soc/intel/skylake/pmutil.c
index 904be5c2a0..7d83e9f240 100644
--- a/src/soc/intel/skylake/pmutil.c
+++ b/src/soc/intel/skylake/pmutil.c
@@ -19,6 +19,8 @@
  * and the differences between PCH variants.
  */
 
+#define __SIMPLE_DEVICE__
+
 #include <arch/io.h>
 #include <device/device.h>
 #include <device/pci.h>
@@ -27,6 +29,7 @@
 #include <halt.h>
 #include <rules.h>
 #include <stdlib.h>
+#include <soc/gpe.h>
 #include <soc/gpio.h>
 #include <soc/iomap.h>
 #include <soc/lpc.h>
@@ -34,6 +37,7 @@
 #include <soc/pm.h>
 #include <soc/pmc.h>
 #include <soc/smbus.h>
+#include "chip.h"
 
 /* Print status bits with descriptive names */
 static void print_status_bits(u32 status, const char *bit_names[])
@@ -465,3 +469,47 @@ void poweroff(void)
 	if (!ENV_SMM)
 		halt();
 }
+
+void pmc_gpe_init(void)
+{
+	ROMSTAGE_CONST struct soc_intel_skylake_config *config;
+	ROMSTAGE_CONST struct device *dev = dev_find_slot(0, PCH_DEVFN_PMC);
+	uint8_t *pmc_regs;
+	uint32_t gpio_cfg;
+	uint32_t gpio_cfg_reg;
+	const uint32_t gpio_cfg_mask =
+		(GPE0_DWX_MASK << GPE0_DW0_SHIFT) |
+		(GPE0_DWX_MASK << GPE0_DW1_SHIFT) |
+		(GPE0_DWX_MASK << GPE0_DW2_SHIFT);
+
+	/* Look up the device in devicetree */
+	if (!dev || !dev->chip_info) {
+		printk(BIOS_ERR, "BUG! Could not find SOC devicetree config\n");
+		return;
+	}
+	config = dev->chip_info;
+	pmc_regs = pmc_mmio_regs();
+
+	/* Route the GPIOs to the GPE0 block. Determine that all values
+	 * are different, and if they aren't use the reset values. */
+	gpio_cfg = 0;
+	if (config->gpe0_dw0 == config->gpe0_dw1 ||
+		config->gpe0_dw1 == config->gpe0_dw2) {
+		printk(BIOS_INFO, "PMC: Using default GPE route.\n");
+		gpio_cfg = read32(pmc_regs + GPIO_CFG);
+	} else {
+		gpio_cfg |= (uint32_t)config->gpe0_dw0 << GPE0_DW0_SHIFT;
+		gpio_cfg |= (uint32_t)config->gpe0_dw1 << GPE0_DW1_SHIFT;
+		gpio_cfg |= (uint32_t)config->gpe0_dw2 << GPE0_DW2_SHIFT;
+	}
+	gpio_cfg_reg = read32(pmc_regs + GPIO_CFG) & ~gpio_cfg_mask;
+	gpio_cfg_reg |= gpio_cfg & gpio_cfg_mask;
+	write32(pmc_regs + GPIO_CFG, gpio_cfg_reg);
+
+	/* Set the routes in the GPIO communities as well. */
+	gpio_route_gpe(gpio_cfg_reg >> GPE0_DW0_SHIFT);
+
+	/* Set GPE enables based on devictree. */
+	enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2,
+			config->gpe0_en_3, config->gpe0_en_4);
+}