Revert "soc/intel/cannonlake: Add postcar stage support"

This reverts commit 399c022a8c6cba7ad6d75fdf377a690395877611.

This was merged too early.  I'll repost it.

Change-Id: Iabac0aaa0a16404c885875137cf34bf64bf956f7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20686
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

4 files changed, 4 insertions, 37 deletions

diff --git a/src/soc/intel/cannonlake/Kconfig b/src/soc/intel/cannonlake/Kconfig
index 483bb672b8..1c0f1bffbe 100644
--- a/src/soc/intel/cannonlake/Kconfig
+++ b/src/soc/intel/cannonlake/Kconfig
@@ -23,8 +23,6 @@ config CPU_SPECIFIC_OPTIONS
 	select HAVE_INTEL_FIRMWARE
 	select INTEL_CAR_NEM_ENHANCED
 	select PLATFORM_USES_FSP2_0
-	select POSTCAR_CONSOLE
-	select POSTCAR_STAGE
 	select RELOCATABLE_RAMSTAGE
 	select SOC_INTEL_COMMON
 	select SOC_INTEL_COMMON_BLOCK_SA
diff --git a/src/soc/intel/cannonlake/Makefile.inc b/src/soc/intel/cannonlake/Makefile.inc
index e427f98929..480e0477ad 100644
--- a/src/soc/intel/cannonlake/Makefile.inc
+++ b/src/soc/intel/cannonlake/Makefile.inc
@@ -5,23 +5,20 @@ subdirs-y += ../../../cpu/intel/microcode
 subdirs-y += ../../../cpu/x86/mtrr
 subdirs-y += ../../../cpu/x86/tsc
 
+bootblock-$(CONFIG_DRIVERS_UART_8250MEM) += uart.c
 bootblock-y += bootblock/bootblock.c
 bootblock-y += bootblock/cpu.c
 bootblock-y += bootblock/pch.c
 bootblock-y += bootblock/report_platform.c
 bootblock-y += gpio.c
-bootblock-$(CONFIG_UART_DEBUG) += uart.c
 
 romstage-y += cbmem.c
 romstage-y += reset.c
-romstage-$(CONFIG_UART_DEBUG) += uart.c
+romstage-$(CONFIG_DRIVERS_UART_8250MEM) += uart.c
 
 ramstage-y += cbmem.c
 ramstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
-ramstage-$(CONFIG_UART_DEBUG) += uart.c
-
-postcar-y += memmap.c
-postcar-$(CONFIG_UART_DEBUG) += uart.c
+ramstage-$(CONFIG_DRIVERS_UART_8250MEM) += uart.c
 
 CPPFLAGS_common += -I$(src)/soc/intel/cannonlake/include/fsp20
 CPPFLAGS_common += -I$(src)/vendorcode/intel/fsp/fsp2_0/cannonlake
diff --git a/src/soc/intel/cannonlake/romstage/romstage.c b/src/soc/intel/cannonlake/romstage/romstage.c
index b051ad8f92..2604f29576 100644
--- a/src/soc/intel/cannonlake/romstage/romstage.c
+++ b/src/soc/intel/cannonlake/romstage/romstage.c
@@ -14,10 +14,6 @@
  */
 
 #include <arch/io.h>
-#include <arch/symbols.h>
-#include <assert.h>
-#include <cpu/x86/mtrr.h>
-#include <cpu/x86/msr.h>
 #include <cbmem.h>
 #include <console/console.h>
 #include <fsp/util.h>
@@ -29,8 +25,6 @@
 asmlinkage void car_stage_entry(void)
 {
 	bool s3wake;
-	struct postcar_frame pcf;
-	uintptr_t top_of_ram;
 	struct chipset_power_state *ps;
 
 	console_init();
@@ -42,25 +36,7 @@ asmlinkage void car_stage_entry(void)
 	timestamp_add_now(TS_START_ROMSTAGE);
 	s3wake = ps->prev_sleep_state == ACPI_S3;
 	fsp_memory_init(s3wake);
-	if (postcar_frame_init(&pcf, 1 * KiB))
-		die("Unable to initialize postcar frame.\n");
-
-	/*
-	 * We need to make sure ramstage will be run cached. At this
-	 * point exact location of ramstage in cbmem is not known.
-	 * Instruct postcar to cache 16 megs under cbmem top which is
-	 * a safe bet to cover ramstage.
-	 */
-	top_of_ram = (uintptr_t) cbmem_top();
-	printk(BIOS_DEBUG, "top_of_ram = 0x%lx\n", top_of_ram);
-	top_of_ram -= 16*MiB;
-	postcar_frame_add_mtrr(&pcf, top_of_ram, 16*MiB, MTRR_TYPE_WRBACK);
-
-	/* Cache the ROM as WP just below 4GiB. */
-	postcar_frame_add_mtrr(&pcf, 0xFFFFFFFF - CONFIG_ROM_SIZE + 1,
-				CONFIG_ROM_SIZE, MTRR_TYPE_WRPROT);
-
-	run_postcar_phase(&pcf);
+	die("Get out from FSP memoryinit. \n");
 }
 
 void platform_fsp_memory_init_params_cb(FSPM_UPD *mupd, uint32_t version)
diff --git a/src/soc/intel/cannonlake/uart.c b/src/soc/intel/cannonlake/uart.c
index dd121b04a4..6f5fb6d7e9 100644
--- a/src/soc/intel/cannonlake/uart.c
+++ b/src/soc/intel/cannonlake/uart.c
@@ -13,8 +13,6 @@
  * GNU General Public License for more details.
  */
 
-#define __SIMPLE_DEVICE__
-
 #include <assert.h>
 #include <console/uart.h>
 #include <device/pci_def.h>
@@ -62,10 +60,8 @@ void pch_uart_init(void)
 	gpio_configure_pads(p->pads, ARRAY_SIZE(p->pads));
 }
 
-#if IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM)
 uintptr_t uart_platform_base(int idx)
 {
 	/* We can only have one serial console at a time */
 	return UART_DEBUG_BASE_ADDRESS;
 }
-#endif