soc/intel/baytrail: Use postcar_frame functions to set up frame

Change-Id: I77e375a2ff2fbf1be4ded922195b80b49ffa4cc5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/29929
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 19 insertions, 64 deletions

diff --git a/src/soc/intel/baytrail/romstage/romstage.c b/src/soc/intel/baytrail/romstage/romstage.c
index 18c9353d10..dd1fd29c7d 100644
--- a/src/soc/intel/baytrail/romstage/romstage.c
+++ b/src/soc/intel/baytrail/romstage/romstage.c
@@ -241,76 +241,31 @@ static inline uint32_t *stack_push(u32 *stack, u32 value)
 	return stack;
 }
 
+#define ROMSTAGE_RAM_STACK_SIZE 0x5000
+
 /* setup_stack_and_mtrrs() determines the stack to use after
  * cache-as-ram is torn down as well as the MTRR settings to use. */
 static void *setup_stack_and_mtrrs(void)
 {
-	int num_mtrrs;
-	uint32_t *slot;
-	uint32_t mtrr_mask_upper;
-	uint32_t top_of_ram;
-
-	/* Top of stack needs to be aligned to a 4-byte boundary. */
-	slot = (void *)romstage_ram_stack_top();
-	num_mtrrs = 0;
-
-	/* The upper bits of the MTRR mask need to set according to the number
-	 * of physical address bits. */
-	mtrr_mask_upper = (1 << ((cpuid_eax(0x80000008) & 0xff) - 32)) - 1;
-
-	/* The order for each MTRR is value then base with upper 32-bits of
-	 * each value coming before the lower 32-bits. The reasoning for
-	 * this ordering is to create a stack layout like the following:
-	 *   +0: Number of MTRRs
-	 *   +4: MTRR base 0 31:0
-	 *   +8: MTRR base 0 63:32
-	 *  +12: MTRR mask 0 31:0
-	 *  +16: MTRR mask 0 63:32
-	 *  +20: MTRR base 1 31:0
-	 *  +24: MTRR base 1 63:32
-	 *  +28: MTRR mask 1 31:0
-	 *  +32: MTRR mask 1 63:32
-	 */
+	struct postcar_frame pcf;
+	uintptr_t top_of_ram;
 
+	if (postcar_frame_init(&pcf, ROMSTAGE_RAM_STACK_SIZE))
+		die("Unable to initialize postcar frame.\n");
 	/* Cache the ROM as WP just below 4GiB. */
-	slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
-	slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID);
-	slot = stack_push(slot, 0); /* upper base */
-	slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRR_TYPE_WRPROT);
-	num_mtrrs++;
+	postcar_frame_add_mtrr(&pcf, CACHE_ROM_BASE, CACHE_ROM_SIZE,
+			       MTRR_TYPE_WRPROT);
 
 	/* Cache RAM as WB from 0 -> CACHE_TMP_RAMTOP. */
-	slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
-	slot = stack_push(slot, ~(CACHE_TMP_RAMTOP - 1) | MTRR_PHYS_MASK_VALID);
-	slot = stack_push(slot, 0); /* upper base */
-	slot = stack_push(slot, 0 | MTRR_TYPE_WRBACK);
-	num_mtrrs++;
-
-	top_of_ram = (uint32_t)cbmem_top();
-	/* Cache 8MiB below the top of ram. The top of RAM under 4GiB is the
-	 * start of the TSEG region. It is required to be 8MiB aligned. Set
-	 * this area as cacheable so it can be used later for ramstage before
-	 * setting up the entire RAM as cacheable. */
-	slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
-	slot = stack_push(slot, ~((8 << 20) - 1) | MTRR_PHYS_MASK_VALID);
-	slot = stack_push(slot, 0); /* upper base */
-	slot = stack_push(slot, (top_of_ram - (8 << 20)) | MTRR_TYPE_WRBACK);
-	num_mtrrs++;
-
-	/* Cache 8MiB at the top of ram. Top of RAM is where the TSEG
-	 * region resides. However, it is not restricted to SMM mode until
-	 * SMM has been relocated. By setting the region to cacheable it
-	 * provides faster access when relocating the SMM handler as well
-	 * as using the TSEG region for other purposes. */
-	slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
-	slot = stack_push(slot, ~((8 << 20) - 1) | MTRR_PHYS_MASK_VALID);
-	slot = stack_push(slot, 0); /* upper base */
-	slot = stack_push(slot, top_of_ram | MTRR_TYPE_WRBACK);
-	num_mtrrs++;
-
-	/* Save the number of MTRRs to setup. Return the stack location
-	 * pointing to the number of MTRRs. */
-	slot = stack_push(slot, num_mtrrs);
-
-	return slot;
+	postcar_frame_add_mtrr(&pcf, 0, CACHE_TMP_RAMTOP, MTRR_TYPE_WRBACK);
+
+	/* Cache at least 8 MiB below the top of ram, and at most 8 MiB
+	 * above top of the ram. This satisfies MTRR alignment requirement
+	 * with different TSEG size configurations.
+	 */
+	top_of_ram = ALIGN_DOWN((uintptr_t)cbmem_top(), 8*MiB);
+	postcar_frame_add_mtrr(&pcf, top_of_ram - 8*MiB, 16*MiB,
+			       MTRR_TYPE_WRBACK);
+
+	return postcar_commit_mtrrs(&pcf);
 }