mediatek: Move watchdog timer code to a common directory

Move watchdog timer (WDT) code which can be reused into a common
directory under soc/mediatek.

BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm

Change-Id: Icbeb04f775c3c0fdc18dd198df8591f5c4b6ddce
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27025
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 63 insertions, 0 deletions

diff --git a/src/soc/mediatek/common/wdt.c b/src/soc/mediatek/common/wdt.c
new file mode 100644
index 0000000000..c2617531a6
--- /dev/null
+++ b/src/soc/mediatek/common/wdt.c
@@ -0,0 +1,63 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 MediaTek Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/io.h>
+#include <console/console.h>
+#include <reset.h>
+#include <soc/addressmap.h>
+#include <soc/wdt.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+
+static struct mtk_wdt_regs *const mtk_wdt = (void *)RGU_BASE;
+
+int mtk_wdt_init(void)
+{
+	uint32_t wdt_sta;
+
+	/* Write Mode register will clear status register */
+	wdt_sta = read32(&mtk_wdt->wdt_status);
+
+	printk(BIOS_INFO, "WDT: Last reset was ");
+	if (wdt_sta & MTK_WDT_STA_HW_RST) {
+		printk(BIOS_INFO, "hardware watchdog\n");
+		mark_watchdog_tombstone();
+	} else if (wdt_sta & MTK_WDT_STA_SW_RST)
+		printk(BIOS_INFO, "normal software reboot\n");
+	else if (wdt_sta & MTK_WDT_STA_SPM_RST)
+		printk(BIOS_INFO, "SPM reboot\n");
+	else if (!wdt_sta)
+		printk(BIOS_INFO, "cold boot\n");
+	else
+		printk(BIOS_INFO, "unexpected reset type: %#.8x\n", wdt_sta);
+
+	/* Config watchdog reboot mode:
+	 * Clearing bits:
+	 * DUAL_MODE & IRQ: trigger reset instead of irq then reset.
+	 * EXT_POL: select watchdog output signal as active low.
+	 * ENABLE: disable watchdog on initialization.
+	 * Setting bit EXTEN to enable watchdog output.
+	 */
+	clrsetbits_le32(&mtk_wdt->wdt_mode,
+			MTK_WDT_MODE_DUAL_MODE | MTK_WDT_MODE_IRQ |
+			MTK_WDT_MODE_EXT_POL | MTK_WDT_MODE_ENABLE,
+			MTK_WDT_MODE_EXTEN | MTK_WDT_MODE_KEY);
+
+	return wdt_sta;
+}
+
+void do_hard_reset(void)
+{
+	write32(&mtk_wdt->wdt_swrst, MTK_WDT_SWRST_KEY);
+}