ipq8064: modify SPI controller driver to work in coreboot

A typical SPI operation consists of two phases - command and data
transfers. Command transfer is always from the host to the chip (i.e.
is going in the 'write' direction), data transfer could be either read
or write.

We don't want the receive FIFO to be operating while the command phase
is in progress. A simple way to keep the receive FIFO shut down is to
not to enable it until the command phase is completed.

Selective control of the receive FIFO allows to consolidate the
receive and transmit functions in a single spi_xfer() function, as it
happens in other SPI controller drivers.

The FIFO FULL and FIFO NOT EMPTY conditions are used to decide if the
next byte can be written or received, respectively. While data is
being received the 0xFF bytes are transmitted per each received byte,
to keep the SPI bus clocking.

The data structure describing the three GSBI ports is moved from the
.h file into .c file. A version of the clrsetbits macro is added to
work with integer addresses instead of pointers.

BUG=chrome-os-partner:27784
TEST=not yet, but with the res of the changes the bootblock loads and
     starts the rombase section successfully.

Original-Change-Id: I78cd0054f1a8f5e1d7213f38ef8de31486238aba
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197779
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit c101ae306d182bbe14935ee139a25968388d745a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>

Change-Id: I7f3fd0524ec6c10008ff514e8a8f1d14a700732f
Reviewed-on: http://review.coreboot.org/7983
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)

1 files changed, 1 insertions, 0 deletions

diff --git a/src/soc/qualcomm/ipq806x/Kconfig b/src/soc/qualcomm/ipq806x/Kconfig
index 92ef3a1d10..09e1c1eae0 100644
--- a/src/soc/qualcomm/ipq806x/Kconfig
+++ b/src/soc/qualcomm/ipq806x/Kconfig
@@ -7,6 +7,7 @@ config SOC_QC_IPQ806X
 	select ARM_LPAE
 	select BOOTBLOCK_CONSOLE
 	select HAVE_UART_SPECIAL
+	select SPI_ATOMIC_SEQUENCING
 
 if SOC_QC_IPQ806X