summaryrefslogtreecommitdiff
path: root/src/soc/qualcomm/qcs405/usb.c
diff options
context:
space:
mode:
authorVijayavardhan Vennapusa <vvreddy@partner-android.googlesource.com>2018-10-16 18:08:29 +0530
committerPatrick Georgi <pgeorgi@google.com>2019-03-28 10:36:22 +0000
commitdd3cffdb0cfd687375c331af5ff680cddcd86b7a (patch)
tree7f906dbeb970961ae682d1cca86c467990a6a287 /src/soc/qualcomm/qcs405/usb.c
parent1d94849e743806caf313fac701f65c49c97e351d (diff)
downloadcoreboot-dd3cffdb0cfd687375c331af5ff680cddcd86b7a.tar.xz
qcs405: Add support for USB host mode
Add required changes for USB host mode for USB disk enumeration. TEST=build & run Change-Id: I35ec549b49b9789389c80843f6103e7243d52aac Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Signed-off-by: Vijayavardhan Vennapusa <vvreddy@partner-android.googlesource.com> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Diffstat (limited to 'src/soc/qualcomm/qcs405/usb.c')
-rw-r--r--src/soc/qualcomm/qcs405/usb.c269
1 files changed, 269 insertions, 0 deletions
diff --git a/src/soc/qualcomm/qcs405/usb.c b/src/soc/qualcomm/qcs405/usb.c
new file mode 100644
index 0000000000..b727248952
--- /dev/null
+++ b/src/soc/qualcomm/qcs405/usb.c
@@ -0,0 +1,269 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (c) 2018 Qualcomm Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/mmio.h>
+#include <lib.h>
+#include <stdlib.h>
+#include <console/console.h>
+#include <delay.h>
+#include <soc/usb.h>
+#include <soc/clock.h>
+#include <timer.h>
+
+/* USB BASE ADDRESS */
+#define USB_HOST0_DWC3_BASE 0x758C100
+#define USB3_USB30_QSCRATCH_BASE 0x7678800
+#define USB2_FEMTO_PHY_PRI_BASE 0x007A000
+#define USB_HOST1_DWC3_BASE 0x78CC100
+#define USB2_USB30_QSCRATCH_BASE 0x79B8800
+#define USB2_FEMTO_PHY_SEC_BASE 0x007C000
+
+struct usb_qscratch {
+ u8 rsvd0[8];
+ u32 *qscratch_cfg_reg;
+
+};
+check_member(usb_qscratch, qscratch_cfg_reg, 0x08);
+
+struct usb_usb2_phy_dig {
+ u8 rsvd1[116];
+ u32 utmi_ctrl5;
+ u32 ctrl_common0;
+ u32 ctrl_common1;
+ u8 rsvd2[12];
+ u32 phy_ctrl1;
+ u32 phy_ctrl2;
+ u8 rsvd3;
+ u32 override_x0;
+ u32 override_x1;
+ u32 override_x2;
+ u32 override_x3;
+ u8 rsvd4[24];
+ u32 tcsr_ctrl;
+ u8 rsvd5[36];
+ u32 refclk_ctrl;
+};
+check_member(usb_usb2_phy_dig, utmi_ctrl5, 0x74);
+check_member(usb_usb2_phy_dig, phy_ctrl1, 0x8C);
+check_member(usb_usb2_phy_dig, override_x0, 0x98);
+check_member(usb_usb2_phy_dig, tcsr_ctrl, 0xC0);
+check_member(usb_usb2_phy_dig, refclk_ctrl, 0xE8);
+
+struct usb_dwc3 {
+ u32 sbuscfg0;
+ u32 sbuscfg1;
+ u32 txthrcfg;
+ u32 rxthrcfg;
+ u32 ctl;
+ u32 pmsts;
+ u32 sts;
+ u32 uctl1;
+ u32 snpsid;
+ u32 gpio;
+ u32 uid;
+ u32 uctl;
+ u64 buserraddr;
+ u64 prtbimap;
+ u8 reserved1[32];
+ u32 dbgfifospace;
+ u32 dbgltssm;
+ u32 dbglnmcc;
+ u32 dbgbmu;
+ u32 dbglspmux;
+ u32 dbglsp;
+ u32 dbgepinfo0;
+ u32 dbgepinfo1;
+ u64 prtbimap_hs;
+ u64 prtbimap_fs;
+ u8 reserved2[112];
+ u32 usb2phycfg;
+ u8 reserved3[60];
+ u32 usb2i2cctl;
+ u8 reserved4[60];
+ u32 usb2phyacc;
+ u8 reserved5[60];
+ u32 usb3pipectl;
+ u8 reserved6[60];
+};
+check_member(usb_dwc3, usb3pipectl, 0x1c0);
+
+struct usb_dwc3_cfg {
+ struct usb_dwc3 *usb_host_dwc3;
+ struct usb_usb2_phy_dig *usb2_phy_dig;
+ struct usb_qscratch *usb_qscratch_reg;
+ u32 *usb2_phy_bcr;
+ u32 *usb2_phy_por_bcr;
+ u32 *usb3_bcr;
+ struct usb_board_data *board_data;
+};
+
+static struct usb_dwc3_cfg usb_host_base[2] = {
+ [HSUSB_SS_PORT_0] = {
+ .usb_host_dwc3 = (void *)USB_HOST0_DWC3_BASE,
+ .usb2_phy_dig = (void *)USB2_FEMTO_PHY_PRI_BASE,
+ .usb2_phy_bcr = (void *)GCC_USB_HS_PHY_CFG_AHB_BCR,
+ .usb2_phy_por_bcr = (void *)GCC_USB2A_PHY_BCR,
+ .usb3_bcr = (void *)GCC_USB_30_BCR,
+ .usb_qscratch_reg = (void *)USB3_USB30_QSCRATCH_BASE,
+ },
+ [HSUSB_HS_PORT_1] = {
+ .usb_host_dwc3 = (void *)USB_HOST1_DWC3_BASE,
+ .usb2_phy_dig = (void *)USB2_FEMTO_PHY_SEC_BASE,
+ .usb2_phy_bcr = (void *)GCC_QUSB2_PHY_BCR,
+ .usb2_phy_por_bcr = (void *)GCC_USB2_HS_PHY_ONLY_BCR,
+ .usb3_bcr = (void *)GCC_USB_HS_BCR,
+ .usb_qscratch_reg = (void *)USB2_USB30_QSCRATCH_BASE,
+ },
+};
+
+void reset_usb(enum usb_port port)
+{
+ struct usb_dwc3_cfg *dwc3 = &usb_host_base[port];
+
+ /* Put Core in Reset */
+ printk(BIOS_INFO, "Starting DWC3 reset for USB%d\n", port);
+
+ /* Assert Core reset */
+ clock_reset_bcr(dwc3->usb3_bcr, 1);
+}
+
+static void usb2_phy_override_phy_params(struct usb_dwc3_cfg *dwc3)
+{
+ /* Override disconnect & squelch threshold values */
+ write8(&dwc3->usb2_phy_dig->override_x0,
+ dwc3->board_data->parameter_override_x0);
+
+ /* Override HS transmitter Pre-emphasis values */
+ write8(&dwc3->usb2_phy_dig->override_x1,
+ dwc3->board_data->parameter_override_x1);
+
+ /* Override HS transmitter Rise/Fall time values */
+ write8(&dwc3->usb2_phy_dig->override_x2,
+ dwc3->board_data->parameter_override_x2);
+
+ /* Override FS/LS Source impedance values */
+ write8(&dwc3->usb2_phy_dig->override_x3,
+ dwc3->board_data->parameter_override_x3);
+}
+
+static void hs_usb_phy_init(struct usb_dwc3_cfg *dwc3)
+{
+ write8(&dwc3->usb2_phy_dig->tcsr_ctrl, USB2PHY_TCSR_CTRL);
+ write8(&dwc3->usb2_phy_dig->refclk_ctrl, USB2PHY_REFCLK_CTRL);
+ write8(&dwc3->usb2_phy_dig->utmi_ctrl5, USB2PHY_UTMI_CTRL5);
+ write8(&dwc3->usb2_phy_dig->override_x0, USB2PHY_PARAMETER_OVERRIDE_X0);
+ write8(&dwc3->usb2_phy_dig->override_x1, USB2PHY_PARAMETER_OVERRIDE_X1);
+ write8(&dwc3->usb2_phy_dig->override_x2, USB2PHY_PARAMETER_OVERRIDE_X2);
+ write8(&dwc3->usb2_phy_dig->override_x3, USB2PHY_PARAMETER_OVERRIDE_X3);
+
+ if (dwc3->board_data)
+ /* Override board specific PHY tuning values */
+ usb2_phy_override_phy_params(dwc3);
+
+ write8(&dwc3->usb2_phy_dig->phy_ctrl1, USB2PHY_HS_PHY_CTRL1);
+ write8(&dwc3->usb2_phy_dig->ctrl_common0, QUSB2PHY_HS_PHY_CTRL_COMMON0);
+ write8(&dwc3->usb2_phy_dig->ctrl_common1, QUSB2PHY_HS_PHY_CTRL_COMMON1);
+ write8(&dwc3->usb2_phy_dig->phy_ctrl2, USB2PHY_HS_PHY_CTRL2);
+ udelay(20);
+ write8(&dwc3->usb2_phy_dig->utmi_ctrl5, USB2PHY_UTMI_CTRL5_POR_CLEAR);
+ write8(&dwc3->usb2_phy_dig->phy_ctrl2,
+ USB2PHY_HS_PHY_CTRL2_SUSPEND_N_SEL);
+}
+
+static void setup_dwc3(struct usb_dwc3 *dwc3)
+{
+ /* core exits U1/U2/U3 only in PHY power state P1/P2/P3 respectively */
+ clrsetbits_le32(&dwc3->usb3pipectl,
+ DWC3_GUSB3PIPECTL_DELAYP1TRANS,
+ DWC3_GUSB3PIPECTL_UX_EXIT_IN_PX);
+
+ clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_SCALEDOWN_MASK |
+ DWC3_GCTL_DISSCRAMBLE),
+ DWC3_GCTL_U2EXIT_LFPS | DWC3_GCTL_DSBLCLKGTNG);
+
+ /* configure controller in Host mode */
+ clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)),
+ DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_HOST));
+ printk(BIOS_INFO, "Configure USB in Host mode\n");
+}
+
+/* Initialization of DWC3 Core and PHY */
+void setup_usb_host(enum usb_port port, struct usb_board_data *board_data)
+{
+ struct usb_dwc3_cfg *dwc3 = &usb_host_base[port];
+ u32 val;
+
+ printk(BIOS_INFO, "Setting up USB HOST%d controller.\n", port);
+
+ dwc3->board_data = board_data;
+
+ /* Clear core reset. */
+ clock_reset_bcr(dwc3->usb3_bcr, 0);
+
+
+ if (port == HSUSB_SS_PORT_0) {
+ /* Set PHY reset. */
+ setbits_le32(&dwc3->usb2_phy_bcr, BIT(1));
+ udelay(15);
+ /* Clear PHY reset. */
+ clrbits_le32(&dwc3->usb2_phy_bcr, BIT(1));
+ } else {
+ clock_reset_bcr(dwc3->usb2_phy_bcr, 1);
+ udelay(15);
+ clock_reset_bcr(dwc3->usb2_phy_bcr, 0);
+ }
+ udelay(100);
+
+ /* Initialize PHYs */
+ hs_usb_phy_init(dwc3);
+
+ if (port == HSUSB_SS_PORT_0) {
+ /* Set PHY POR reset. */
+ setbits_le32(&dwc3->usb2_phy_por_bcr, BIT(0));
+ val = read8(&dwc3->usb2_phy_dig->ctrl_common0);
+ val &= ~(0x4);
+ write8(&dwc3->usb2_phy_dig->ctrl_common0, val);
+ udelay(20);
+ /* Clear PHY POR reset. */
+ clrbits_le32(&dwc3->usb2_phy_por_bcr, BIT(0));
+ } else {
+ clock_reset_bcr(dwc3->usb2_phy_por_bcr, 1);
+ val = read8(&dwc3->usb2_phy_dig->ctrl_common0);
+ val &= ~(0x4);
+ write8(&dwc3->usb2_phy_dig->ctrl_common0, val);
+ udelay(20);
+ clock_reset_bcr(dwc3->usb2_phy_por_bcr, 0);
+ }
+ udelay(100);
+
+ setup_dwc3(dwc3->usb_host_dwc3);
+
+ /*
+ * Below sequence is used when dwc3 operates without
+ * SSPHY and only HS/FS/LS modes are supported.
+ */
+
+ /* Configure dwc3 to use UTMI clock as PIPE clock not present */
+ setbits_le32(&dwc3->usb_qscratch_reg->qscratch_cfg_reg,
+ PIPE_UTMI_CLK_DIS);
+ udelay(2);
+ setbits_le32(&dwc3->usb_qscratch_reg->qscratch_cfg_reg,
+ PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW);
+ udelay(3);
+ clrbits_le32(&dwc3->usb_qscratch_reg->qscratch_cfg_reg,
+ PIPE_UTMI_CLK_DIS);
+
+ printk(BIOS_INFO, "DWC3 and PHY setup finished\n");
+}