summaryrefslogtreecommitdiff
path: root/src/soc/rockchip/rk3399
diff options
context:
space:
mode:
authorWilliam wu <wulf@rock-chips.com>2016-10-01 20:58:21 +0800
committerPatrick Georgi <pgeorgi@google.com>2016-10-08 16:40:09 +0200
commit801a8ef2c3c209e0f44978b677f7b03cde209f21 (patch)
tree4345dae0b9c3d4860f6c262a8cbe76072156db55 /src/soc/rockchip/rk3399
parentaa9df0f0dec62794dbea1d97852fc0d32a81ca14 (diff)
downloadcoreboot-801a8ef2c3c209e0f44978b677f7b03cde209f21.tar.xz
rockchip/rk3399: Add Type-C PHY init
Though we don't use Type-C PHY to support USB3 in firmware, we still need to initialize the Type-C PHY, and make sure the power state of pipe is always fixed to U2/P2. After this, we can force USB3 controller to work in USB2 only mode. BRANCH=none BUG=chrome-os-partner:56425 TEST=Go to recovery mode, plug a Type-C USB drive containing chrome OS image into both ports in all orientations, check if system can boot from USB. Change-Id: I95bb96ff27d4fecafb7b2b9e9dc2839b5c132654 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8ec98507845276119d8a9d5626934dedcb35f2dd Original-Change-Id: Ie3654cd1c1cb76b62aa9b247879b60cbecee0155 Original-Signed-off-by: William wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/391412 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16910 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
Diffstat (limited to 'src/soc/rockchip/rk3399')
-rw-r--r--src/soc/rockchip/rk3399/include/soc/usb.h33
-rw-r--r--src/soc/rockchip/rk3399/usb.c68
2 files changed, 91 insertions, 10 deletions
diff --git a/src/soc/rockchip/rk3399/include/soc/usb.h b/src/soc/rockchip/rk3399/include/soc/usb.h
index 46d3752328..c2fa1a2af4 100644
--- a/src/soc/rockchip/rk3399/include/soc/usb.h
+++ b/src/soc/rockchip/rk3399/include/soc/usb.h
@@ -111,12 +111,41 @@ static struct rockchip_usb_dwc3 * const rockchip_usb_otg0_dwc3 =
static struct rockchip_usb_dwc3 * const rockchip_usb_otg1_dwc3 =
(void *)USB_OTG1_DWC3_BASE;
-/* TODO: define struct overlay if we ever need more registers from this */
-#define TCPHY_ISOLATION_CTRL_OFFSET 0x3207c
#define TCPHY_ISOLATION_CTRL_EN (1 << 15)
#define TCPHY_ISOLATION_CTRL_CMN_EN (1 << 14)
#define TCPHY_ISOLATION_CTRL_MODE_SEL (1 << 12)
#define TCPHY_ISOLATION_CTRL_LN_EN(ln) (1 << (ln))
+#define TCPHY_CMN_HSCLK_PLL_CONFIG 0x30
+#define TCPHY_CMN_HSCLK_PLL_MASK 0x33
+
+struct rk3399_tcphy {
+ uint8_t _res0[0x780 - 0x0];
+ uint32_t cmn_diag_hsclk_sel;
+ uint8_t _res1[0x10000 - 0x784];
+ struct {
+ uint8_t _res2[0x3c8 - 0x0];
+ uint32_t xcvr_diag_lane_fcm_en_mgn;
+ uint8_t _res3[0x408 - 0x3cc];
+ uint32_t tx_psc_a2;
+ uint8_t _res4[0x488 - 0x40c];
+ uint32_t tx_rcvdet_en_tmr;
+ uint32_t tx_rcvdet_st_tmr;
+ uint8_t _res5[0x784 - 0x490];
+ uint32_t tx_diag_tx_drv;
+ uint8_t _res6[0x800 - 0x788];
+ } lane[4];
+ uint8_t _res7[0x32000 - 0x12000];
+ uint32_t pma_cmn_ctrl1;
+ uint8_t _res8[0x3207c - 0x32004];
+ uint32_t isolation_ctrl;
+};
+check_member(rk3399_tcphy, lane[2].tx_diag_tx_drv, 0x11784);
+check_member(rk3399_tcphy, isolation_ctrl, 0x3207c);
+
+static struct rk3399_tcphy * const rockchip_usb_otg0_phy =
+ (void *)USB_OTG0_TCPHY_BASE;
+static struct rk3399_tcphy * const rockchip_usb_otg1_phy =
+ (void *)USB_OTG1_TCPHY_BASE;
/* Call reset_ before setup_ */
void reset_usb_otg0(void);
diff --git a/src/soc/rockchip/rk3399/usb.c b/src/soc/rockchip/rk3399/usb.c
index 4c731bdf17..e6db1e0d6a 100644
--- a/src/soc/rockchip/rk3399/usb.c
+++ b/src/soc/rockchip/rk3399/usb.c
@@ -24,9 +24,9 @@
/* SuperSpeed over Type-C is hard. We don't care about speed in firmware: just
* gate off the SuperSpeed lines to have an unimpaired USB 2.0 connection. */
-static void isolate_tcphy(uintptr_t base)
+static void isolate_tcphy(struct rk3399_tcphy *tcphy)
{
- write32((void *)(base + TCPHY_ISOLATION_CTRL_OFFSET),
+ write32(&tcphy->isolation_ctrl,
TCPHY_ISOLATION_CTRL_EN |
TCPHY_ISOLATION_CTRL_CMN_EN |
TCPHY_ISOLATION_CTRL_MODE_SEL |
@@ -40,6 +40,42 @@ static void isolate_tcphy(uintptr_t base)
TCPHY_ISOLATION_CTRL_LN_EN(0));
}
+static void tcphy_cfg_24m(struct rk3399_tcphy *tcphy)
+{
+ u32 i;
+
+ /* cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
+ * cmn_psm_clk_dig_div = 2, set the clk division to 2 */
+ write32(&tcphy->pma_cmn_ctrl1, 2 << 10 | 3 << 4);
+ for (i = 0; i < 4; i++) {
+ /* The following PHY configuration assumes a
+ * 24 MHz reference clock */
+ write32(&tcphy->lane[i].xcvr_diag_lane_fcm_en_mgn, 0x90);
+ write32(&tcphy->lane[i].tx_rcvdet_en_tmr, 0x960);
+ write32(&tcphy->lane[i].tx_rcvdet_st_tmr, 0x30);
+ }
+
+ clrsetbits_le32(&tcphy->cmn_diag_hsclk_sel,
+ TCPHY_CMN_HSCLK_PLL_MASK, TCPHY_CMN_HSCLK_PLL_CONFIG);
+}
+
+static void tcphy_phy_init(struct rk3399_tcphy *tcphy)
+{
+ u32 i;
+
+ tcphy_cfg_24m(tcphy);
+
+ for (i = 0; i < 4; i++) {
+ /* Enable transmitter reset pull down override for all lanes*/
+ write32(&tcphy->lane[i].tx_diag_tx_drv, 0x2000);
+ /* Disable transmitter low current mode, disable TX
+ * driver common mode, disable TX post-emphasis*/
+ write32(&tcphy->lane[i].tx_psc_a2, 0x0000);
+ }
+
+ isolate_tcphy(tcphy);
+}
+
static void reset_dwc3(struct rockchip_usb_dwc3 *dwc3)
{
/* Before Resetting PHY, put Core in Reset */
@@ -89,38 +125,54 @@ static void setup_dwc3(struct rockchip_usb_dwc3 *dwc3)
void reset_usb_otg0(void)
{
+ printk(BIOS_DEBUG, "Starting DWC3 and TCPHY reset for USB OTG0\n");
+
/* Keep whole USB OTG0 controller in reset, then
* configure controller to work in USB 2.0 only mode. */
write32(&cru_ptr->softrst_con[18], RK_SETBITS(1 << 5));
write32(&rk3399_grf->usb3otg0_con1, RK_CLRSETBITS(0xf << 12, 1 << 0));
write32(&cru_ptr->softrst_con[18], RK_CLRBITS(1 << 5));
- printk(BIOS_DEBUG, "Starting DWC3 reset for USB OTG0\n");
+ tcphy_phy_init(rockchip_usb_otg0_phy);
+
+ /* Clear TCPHY0 reset */
+ write32(&cru_ptr->softrst_con[9], RK_CLRBITS(1 << 5));
+
reset_dwc3(rockchip_usb_otg0_dwc3);
}
void reset_usb_otg1(void)
{
+ printk(BIOS_DEBUG, "Starting DWC3 and TCPHY reset for USB OTG1\n");
+
/* Keep whole USB OTG1 controller in reset, then
* configure controller to work in USB 2.0 only mode. */
write32(&cru_ptr->softrst_con[18], RK_SETBITS(1 << 6));
write32(&rk3399_grf->usb3otg1_con1, RK_CLRSETBITS(0xf << 12, 1 << 0));
write32(&cru_ptr->softrst_con[18], RK_CLRBITS(1 << 6));
- printk(BIOS_DEBUG, "Starting DWC3 reset for USB OTG1\n");
+ tcphy_phy_init(rockchip_usb_otg1_phy);
+
+ /* Clear TCPHY1 reset */
+ write32(&cru_ptr->softrst_con[9], RK_CLRBITS(1 << 13));
+
reset_dwc3(rockchip_usb_otg1_dwc3);
}
void setup_usb_otg0(void)
{
- isolate_tcphy(USB_OTG0_TCPHY_BASE);
+ /* Clear pipe reset */
+ write32(&cru_ptr->softrst_con[9], RK_CLRBITS(1 << 4));
+
setup_dwc3(rockchip_usb_otg0_dwc3);
- printk(BIOS_DEBUG, "DWC3 setup for USB OTG0 finished\n");
+ printk(BIOS_DEBUG, "DWC3 and TCPHY setup for USB OTG0 finished\n");
}
void setup_usb_otg1(void)
{
- isolate_tcphy(USB_OTG1_TCPHY_BASE);
+ /* Clear pipe reset */
+ write32(&cru_ptr->softrst_con[9], RK_CLRBITS(1 << 12));
+
setup_dwc3(rockchip_usb_otg1_dwc3);
- printk(BIOS_DEBUG, "DWC3 setup for USB OTG1 finished\n");
+ printk(BIOS_DEBUG, "DWC3 and TCPHY setup for USB OTG1 finished\n");
}