summaryrefslogtreecommitdiff
path: root/src/soc/rockchip
diff options
context:
space:
mode:
authorEge Mihmanli <egemih@google.com>2018-01-07 18:03:07 -0800
committerJulius Werner <jwerner@chromium.org>2018-01-10 20:57:17 +0000
commitbb9bdeb59480cade6f428237c6727d805d6c5f4c (patch)
tree8155354b15fac50678564dd92684eacf16912b2d /src/soc/rockchip
parent1876f3ae4530fa691c9d6e88f3f7f8807d57d318 (diff)
downloadcoreboot-bb9bdeb59480cade6f428237c6727d805d6c5f4c.tar.xz
soc/rockchip/rk3399: Ensure full eDP init sequence
This patch fixes 2 edp display issues: 1. When rk_edp_prepare fails >3 times, edp_init isn't run because while-condition is not satisfied. Then, only a partial init sequence is ran. This causes all aux transactions to fail. 2. If rk_edp_prepare never succeeds, coreboot never leaves link training stage due to infinite loop. Boot process is stuck. TEST=Boot past eDP initialization stage and make sure AP logs don't have show aux transaction fails. Change-Id: I44c3f53e8786558c43078d4afe9acde4d64796e7 Signed-off-by: Ege Mihmanli <egemih@google.com> Reviewed-on: https://review.coreboot.org/23152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
Diffstat (limited to 'src/soc/rockchip')
-rw-r--r--src/soc/rockchip/rk3399/display.c23
1 files changed, 16 insertions, 7 deletions
diff --git a/src/soc/rockchip/rk3399/display.c b/src/soc/rockchip/rk3399/display.c
index b81e96f0fe..f27d78ed86 100644
--- a/src/soc/rockchip/rk3399/display.c
+++ b/src/soc/rockchip/rk3399/display.c
@@ -45,7 +45,7 @@ static void reset_edp(void)
udelay(1);
write32(&cru_ptr->softrst_con[17],
RK_CLRBITS(1 << 12 | 1 << 13));
- printk(BIOS_WARNING, "Retrying epd initialization.\n");
+ printk(BIOS_WARNING, "Retrying EDP initialization.\n");
}
void rk_display_init(device_t dev)
@@ -53,8 +53,9 @@ void rk_display_init(device_t dev)
struct edid edid;
struct soc_rockchip_rk3399_config *conf = dev->chip_info;
enum vop_modes detected_mode = VOP_MODE_UNKNOWN;
- int retry_count = 0;
const struct mipi_panel_data *panel_data = NULL;
+ int retry_count_init = 0;
+ int retry_count_edp_prepare = 0;
/* let's use vop0 in rk3399 */
uint32_t vop_id = 0;
@@ -77,14 +78,17 @@ void rk_display_init(device_t dev)
write32(&rk3399_grf->soc_con25, RK_SETBITS(1 << 11));
retry_edp:
- while (retry_count++ < 3) {
+ /* Reset in case code jumped here. */
+ retry_count_init = 0;
+ while (retry_count_init++ < 3) {
rk_edp_init();
if (rk_edp_get_edid(&edid) == 0) {
detected_mode = VOP_MODE_EDP;
break;
}
- if (retry_count == 3) {
- printk(BIOS_WARNING, "Warning: epd initialization failed.\n");
+ if (retry_count_init == 3) {
+ printk(BIOS_WARNING,
+ "Warning: EDP initialization failed.\n");
return;
} else {
reset_edp();
@@ -159,8 +163,13 @@ retry_edp:
case VOP_MODE_EDP:
/* will enable edp in depthcharge */
if (rk_edp_prepare()) {
- reset_edp();
- goto retry_edp; /* Rerun entire init sequence */
+ if (retry_count_edp_prepare++ < 3) {
+ reset_edp();
+ /* Rerun entire init sequence */
+ goto retry_edp;
+ }
+ printk(BIOS_ERR, "EDP preparation failed.");
+ return;
}
break;
default: