summaryrefslogtreecommitdiff
path: root/src/soc/rockchip
diff options
context:
space:
mode:
authorNickey Yang <nickey.yang@rock-chips.com>2017-04-27 09:38:06 +0800
committerJulius Werner <jwerner@chromium.org>2017-05-18 01:00:09 +0200
commitfe122d4dfc130be1e87b367b0dc9b39044b262bd (patch)
tree021e8b921fcdfd1d6af2ea62a57fd4c4af7a48c7 /src/soc/rockchip
parent2684efc49213802dcd36bd9bddd7a69851b8774a (diff)
downloadcoreboot-fe122d4dfc130be1e87b367b0dc9b39044b262bd.tar.xz
rockchip/rk3399: Add MIPI driver
This patch configures clock for mipi and then adds mipi driver for support innolux-p079zca mipi panel in rk3399 scarlet. Change-Id: I02475eefb187c619c614b1cd20e97074bc8d917f Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
Diffstat (limited to 'src/soc/rockchip')
-rw-r--r--src/soc/rockchip/common/include/soc/vop.h1
-rw-r--r--src/soc/rockchip/common/vop.c16
-rw-r--r--src/soc/rockchip/rk3399/Makefile.inc1
-rw-r--r--src/soc/rockchip/rk3399/chip.h12
-rw-r--r--src/soc/rockchip/rk3399/clock.c10
-rw-r--r--src/soc/rockchip/rk3399/display.c50
-rw-r--r--src/soc/rockchip/rk3399/include/soc/addressmap.h1
-rw-r--r--src/soc/rockchip/rk3399/include/soc/clock.h1
-rw-r--r--src/soc/rockchip/rk3399/include/soc/mipi.h288
-rw-r--r--src/soc/rockchip/rk3399/mipi.c436
10 files changed, 800 insertions, 16 deletions
diff --git a/src/soc/rockchip/common/include/soc/vop.h b/src/soc/rockchip/common/include/soc/vop.h
index 98ad08255a..c5c542583d 100644
--- a/src/soc/rockchip/common/include/soc/vop.h
+++ b/src/soc/rockchip/common/include/soc/vop.h
@@ -119,6 +119,7 @@ enum vop_modes {
*/
VOP_MODE_EDP = 0,
VOP_MODE_HDMI,
+ VOP_MODE_MIPI,
VOP_MODE_NONE,
VOP_MODE_AUTO_DETECT,
VOP_MODE_UNKNOWN,
diff --git a/src/soc/rockchip/common/vop.c b/src/soc/rockchip/common/vop.c
index 629072e22e..70d59bd6a8 100644
--- a/src/soc/rockchip/common/vop.c
+++ b/src/soc/rockchip/common/vop.c
@@ -24,7 +24,6 @@
#include <soc/edp.h>
#include <soc/vop.h>
-
static struct rockchip_vop_regs * const vop_regs[] = {
(struct rockchip_vop_regs *)VOP_BIG_BASE,
(struct rockchip_vop_regs *)VOP_LIT_BASE
@@ -109,6 +108,7 @@ void rkvop_mode_set(u32 vop_id, const struct edid *edid, u32 mode)
u32 vfront_porch = edid->mode.vso;
u32 vsync_len = edid->mode.vspw;
u32 vback_porch = edid->mode.vbl - edid->mode.vso - edid->mode.vspw;
+ u32 dsp_out_mode;
struct rockchip_vop_regs *preg = vop_regs[vop_id];
switch (mode) {
@@ -116,17 +116,25 @@ void rkvop_mode_set(u32 vop_id, const struct edid *edid, u32 mode)
case VOP_MODE_HDMI:
clrsetbits_le32(&preg->sys_ctrl,
M_ALL_OUT_EN, V_HDMI_OUT_EN(1));
+ dsp_out_mode = 15;
+ break;
+ case VOP_MODE_MIPI:
+ clrsetbits_le32(&preg->sys_ctrl,
+ M_ALL_OUT_EN, V_MIPI_OUT_EN(1));
+ dsp_out_mode = 0;
break;
-
case VOP_MODE_EDP:
default:
clrsetbits_le32(&preg->sys_ctrl,
M_ALL_OUT_EN, V_EDP_OUT_EN(1));
+ dsp_out_mode = 15;
break;
}
+
clrsetbits_le32(&preg->dsp_ctrl0,
- M_DSP_OUT_MODE | M_DSP_VSYNC_POL | M_DSP_HSYNC_POL,
- V_DSP_OUT_MODE(15) |
+ M_DSP_OUT_MODE | M_DSP_VSYNC_POL |
+ M_DSP_HSYNC_POL,
+ V_DSP_OUT_MODE(dsp_out_mode) |
V_DSP_HSYNC_POL(edid->mode.phsync == '+') |
V_DSP_VSYNC_POL(edid->mode.pvsync == '+'));
diff --git a/src/soc/rockchip/rk3399/Makefile.inc b/src/soc/rockchip/rk3399/Makefile.inc
index 8448ff242e..54c51152af 100644
--- a/src/soc/rockchip/rk3399/Makefile.inc
+++ b/src/soc/rockchip/rk3399/Makefile.inc
@@ -66,6 +66,7 @@ ramstage-$(CONFIG_DRIVERS_UART) += ../common/uart.c
ramstage-y += clock.c
ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += display.c
ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += ../common/edp.c
+ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += mipi.c
ramstage-y += ../common/gpio.c
ramstage-y += gpio.c
ramstage-y += ../common/i2c.c
diff --git a/src/soc/rockchip/rk3399/chip.h b/src/soc/rockchip/rk3399/chip.h
index 1f9462a009..4b2ccc5b52 100644
--- a/src/soc/rockchip/rk3399/chip.h
+++ b/src/soc/rockchip/rk3399/chip.h
@@ -26,6 +26,18 @@ struct soc_rockchip_rk3399_config {
u32 bl_pwm_to_enable_udelay;
u32 framebuffer_bits_per_pixel;
u32 vop_mode;
+ u32 panel_pixel_clock; /* below only be considered for MIPI displays */
+ u32 panel_refresh;
+ u32 panel_ha;
+ u32 panel_hbl;
+ u32 panel_hso;
+ u32 panel_hspw;
+ u32 panel_va;
+ u32 panel_vbl;
+ u32 panel_vso;
+ u32 panel_vspw;
+ u32 panel_display_on_mdelay;
+ u32 panel_video_mode_mdelay;
};
#endif /* __SOC_ROCKCHIP_RK3399_CHIP_H__ */
diff --git a/src/soc/rockchip/rk3399/clock.c b/src/soc/rockchip/rk3399/clock.c
index 7e205d2ba4..35c96bcf37 100644
--- a/src/soc/rockchip/rk3399/clock.c
+++ b/src/soc/rockchip/rk3399/clock.c
@@ -953,3 +953,13 @@ void rkclk_configure_edp(unsigned int hz)
(src_clk_div - 1) <<
CLK_PCLK_EDP_DIV_CON_SHIFT));
}
+
+void rkclk_configure_mipi(void)
+{
+ /* Enable clk_mipidphy_ref and clk_mipidphy_cfg */
+ write32(&cru_ptr->clkgate_con[11],
+ RK_CLRBITS(1 << 14 | 1 << 15));
+ /* Enable pclk_mipi_dsi0 */
+ write32(&cru_ptr->clkgate_con[29],
+ RK_CLRBITS(1 << 1));
+}
diff --git a/src/soc/rockchip/rk3399/display.c b/src/soc/rockchip/rk3399/display.c
index c7ca8916ba..379e1bfec8 100644
--- a/src/soc/rockchip/rk3399/display.c
+++ b/src/soc/rockchip/rk3399/display.c
@@ -31,6 +31,7 @@
#include <soc/gpio.h>
#include <soc/grf.h>
#include <soc/mmu_operations.h>
+#include <soc/mipi.h>
#include <soc/soc.h>
#include <soc/vop.h>
@@ -47,6 +48,21 @@ static void reset_edp(void)
printk(BIOS_WARNING, "Retrying epd initialization.\n");
}
+static void rk_get_mipi_mode(struct edid *edid, device_t dev)
+{
+ struct soc_rockchip_rk3399_config *conf = dev->chip_info;
+
+ edid->mode.pixel_clock = conf->panel_pixel_clock;
+ edid->mode.refresh = conf->panel_refresh;
+ edid->mode.ha = conf->panel_ha;
+ edid->mode.hbl = conf->panel_hbl;
+ edid->mode.hso = conf->panel_hso;
+ edid->mode.hspw = conf->panel_hspw;
+ edid->mode.va = conf->panel_va;
+ edid->mode.vbl = conf->panel_vbl;
+ edid->mode.vso = conf->panel_vso;
+ edid->mode.vspw = conf->panel_vspw;
+}
void rk_display_init(device_t dev)
{
struct edid edid;
@@ -60,8 +76,6 @@ void rk_display_init(device_t dev)
switch (conf->vop_mode) {
case VOP_MODE_NONE:
return;
- case VOP_MODE_AUTO_DETECT:
- /* try EDP first, then HDMI */
case VOP_MODE_EDP:
printk(BIOS_DEBUG, "Attempting to set up EDP display.\n");
rkclk_configure_vop_aclk(vop_id, 200 * MHz);
@@ -91,11 +105,22 @@ retry_edp:
}
}
break;
- case VOP_MODE_HDMI:
- printk(BIOS_WARNING, "HDMI display is NOT supported yet.\n");
- return;
+ case VOP_MODE_MIPI:
+ printk(BIOS_DEBUG, "Attempting to setup MIPI display.\n");
+
+ rkclk_configure_mipi();
+ rkclk_configure_vop_aclk(vop_id, 200 * MHz);
+
+ /* disable turnrequest turndisable forcetxstop forcerxmode */
+ write32(&rk3399_grf->soc_con22, RK_CLRBITS(0xffff));
+ /* select mipi-dsi0 signal from vop0 */
+ write32(&rk3399_grf->soc_con20, RK_CLRBITS(1 << 0));
+
+ rk_get_mipi_mode(&edid, dev);
+ detected_mode = VOP_MODE_MIPI;
+ break;
default:
- printk(BIOS_WARNING, "Cannot read any EDID info, aborting.\n");
+ printk(BIOS_WARNING, "Unsupported vop_mode, aborting.\n");
return;
}
@@ -112,20 +137,21 @@ retry_edp:
rkvop_prepare(vop_id, &edid);
switch (detected_mode) {
- case VOP_MODE_HDMI:
- /* should not be here before HDMI supported */
- return;
+ case VOP_MODE_MIPI:
+ rk_mipi_prepare(&edid, conf->panel_display_on_mdelay, conf->panel_video_mode_mdelay);
+ break;
case VOP_MODE_EDP:
- default:
/* will enable edp in depthcharge */
if (rk_edp_prepare()) {
reset_edp();
goto retry_edp; /* Rerun entire init sequence */
}
- mainboard_power_on_backlight();
+ break;
+ default:
break;
}
-
+ mainboard_power_on_backlight();
set_vbe_mode_info_valid(&edid, (uintptr_t)0);
+
return;
}
diff --git a/src/soc/rockchip/rk3399/include/soc/addressmap.h b/src/soc/rockchip/rk3399/include/soc/addressmap.h
index 1762a8d277..7a365adb86 100644
--- a/src/soc/rockchip/rk3399/include/soc/addressmap.h
+++ b/src/soc/rockchip/rk3399/include/soc/addressmap.h
@@ -59,6 +59,7 @@
#define SARADC_BASE 0xff100000
#define RK_PWM_BASE 0xff420000
#define EDP_BASE 0xff970000
+#define MIPI_BASE 0xff960000
#define VOP_BIG_BASE 0xff900000 /* corresponds to vop_id 0 */
#define VOP_LIT_BASE 0xff8f0000 /* corresponds to vop_id 1 */
diff --git a/src/soc/rockchip/rk3399/include/soc/clock.h b/src/soc/rockchip/rk3399/include/soc/clock.h
index 3047f738b0..37a4c09012 100644
--- a/src/soc/rockchip/rk3399/include/soc/clock.h
+++ b/src/soc/rockchip/rk3399/include/soc/clock.h
@@ -120,5 +120,6 @@ void rkclk_ddr_reset(u32 ch, u32 ctl, u32 phy);
int rkclk_was_watchdog_reset(void);
uint32_t rkclk_i2c_clock_for_bus(unsigned bus);
void rkclk_configure_edp(unsigned int hz);
+void rkclk_configure_mipi(void);
#endif /* __SOC_ROCKCHIP_RK3399_CLOCK_H__ */
diff --git a/src/soc/rockchip/rk3399/include/soc/mipi.h b/src/soc/rockchip/rk3399/include/soc/mipi.h
new file mode 100644
index 0000000000..2dfbc521d2
--- /dev/null
+++ b/src/soc/rockchip/rk3399/include/soc/mipi.h
@@ -0,0 +1,288 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Rockchip Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __RK_MIPI_H
+#define __RK_MIPI_H
+
+#include <stdlib.h>
+
+struct rk_mipi_regs {
+ u32 dsi_version;
+ u32 dsi_pwr_up;
+ u32 dsi_clk_cfg;
+ u32 dsi_dpi_vcid;
+ u32 dsi_dpi_color_coding;
+ u32 dsi_dpi_cfg_pol;
+ u32 dsi_dpi_lp_cmd_tim;
+ u8 reserved0[0x28 - 0x18];
+ u32 dsi_pckhdl_cfg;
+ u8 reserved1[0x30 - 0x2c];
+ u32 dsi_mode_cfg;
+ u32 dsi_vid_mode_cfg;
+ u32 dsi_vid_pkt_size;
+ u32 dsi_vid_num_chumks;
+ u32 dsi_vid_null_pkt_size;
+ u32 dsi_vid_hsa_time;
+ u32 dsi_vid_hbp_time;
+ u32 dsi_vid_hline_time;
+ u32 dsi_vid_vsa_lines;
+ u32 dsi_vid_vbp_lines;
+ u32 dsi_vid_vfp_lines;
+ u32 dsi_vid_vactive_lines;
+ u32 dsi_edpi_cmd_size;
+ u32 dsi_cmd_mode_cfg;
+ u32 dsi_gen_hdr;
+ u32 dsi_gen_pld_data;
+ u32 dsi_cmd_pkt_status;
+ u32 dsi_to_cnt_cfg;
+ u8 reserved2[0x88 - 0x78];
+ u32 dsi_bta_to_cnt;
+ u32 reserved3;
+ u32 dsi_lpclk_ctrl;
+ u32 dsi_phy_tmr_lpclk_cfg;
+ u32 dsi_phy_tmr_cfg;
+ u32 dsi_phy_rstz;
+ u32 dsi_phy_if_cfg;
+ u8 reserved4[0xac - 0xa4];
+ u32 dsi_phy_status;
+ u32 dsi_phy_tst_ctrl0;
+ u32 dsi_phy_tst_ctrl1;
+ u32 dsi_int_st0;
+ u32 dsi_int_st1;
+ u32 dsi_int_msk0;
+ u32 dsi_int_msk1;
+};
+check_member(rk_mipi_regs, dsi_int_msk1, 0xc8);
+
+#define RESET 0
+#define POWERUP BIT(0)
+
+#define TO_CLK_DIVIDSION(div) (((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVIDSION(div) (((div) & 0xff) << 0)
+
+#define EN18_LOOSELY BIT(8)
+#define DPI_COLOR_CODING_16BIT_1 0x0
+#define DPI_COLOR_CODING_16BIT_2 0x1
+#define DPI_COLOR_CODING_16BIT_3 0x2
+#define DPI_COLOR_CODING_18BIT_1 0x3
+#define DPI_COLOR_CODING_18BIT_2 0x4
+#define DPI_COLOR_CODING_24BIT 0x5
+
+#define COLORM_ACTIVE_LOW BIT(4)
+#define SHUTD_ACTIVE_LOW BIT(3)
+#define HSYNC_ACTIVE_LOW BIT(2)
+#define VSYNC_ACTIVE_LOW BIT(1)
+#define DATAEN_ACTIVE_LOW BIT(0)
+
+#define OUTVACT_LPCMD_TIME(p) (((p) & 0xff) << 16)
+#define INVACT_LPCMD_TIME(p) ((p) & 0xff)
+
+#define EN_CRC_RX BIT(4)
+#define EN_ECC_RX BIT(3)
+#define EN_BTA BIT(2)
+#define EN_EOTP_RX BIT(1)
+#define EN_EOTP_TX BIT(0)
+
+#define ENABLE_VIDEO_MODE 0
+#define ENABLE_CMD_MODE BIT(0)
+
+#define FRAME_BTA_ACK BIT(14)
+#define ENABLE_LOW_POWER (0x3f << 8)
+#define ENABLE_LOW_POWER_MASK (0x3f << 8)
+#define VID_MODE_TYPE_BURST_SYNC_PULSES 0x0
+#define VID_MODE_TYPE_BURST_SYNC_EVENTS 0x1
+#define VID_MODE_TYPE_BURST 0x2
+
+#define VID_PKT_SIZE(p) (((p) & 0x3fff) << 0)
+#define VID_PKT_MAX_SIZE 0x3fff
+
+#define MAX_RD_PKT_SIZE_LP BIT(24)
+#define DCS_LW_TX_LP BIT(19)
+#define DCS_SR_0P_TX_LP BIT(18)
+#define DCS_SW_1P_TX_LP BIT(17)
+#define DCS_SW_0P_TX_LP BIT(16)
+#define GEN_LW_TX_LP BIT(14)
+#define GEN_SR_2P_TX_LP BIT(13)
+#define GEN_SR_1P_TX_LP BIT(12)
+#define GEN_SR_0P_TX_LP BIT(11)
+#define GEN_SW_2P_TX_LP BIT(10)
+#define GEN_SW_1P_TX_LP BIT(9)
+#define GEN_SW_0P_TX_LP BIT(8)
+#define EN_ACK_RQST BIT(1)
+#define EN_TEAR_FX BIT(0)
+
+#define CMD_MODE_ALL_LP (MAX_RD_PKT_SIZE_LP | \
+ DCS_LW_TX_LP | \
+ DCS_SR_0P_TX_LP | \
+ DCS_SW_1P_TX_LP | \
+ DCS_SW_0P_TX_LP | \
+ GEN_LW_TX_LP | \
+ GEN_SR_2P_TX_LP | \
+ GEN_SR_1P_TX_LP | \
+ GEN_SR_0P_TX_LP | \
+ GEN_SW_2P_TX_LP | \
+ GEN_SW_1P_TX_LP | \
+ GEN_SW_0P_TX_LP)
+
+#define GEN_HDATA(data) (((data) & 0xffff) << 8)
+#define GEN_HDATA_MASK (0xffff << 8)
+#define GEN_HTYPE(type) (((type) & 0xff) << 0)
+#define GEN_HTYPE_MASK 0xff
+
+#define HSTX_TO_CNT(p) (((p) & 0xffff) << 16)
+#define LPRX_TO_CNT(p) ((p) & 0xffff)
+
+#define AUTO_CLKLANE_CTRL BIT(1)
+#define PHY_TXREQUESTCLKHS BIT(0)
+
+#define PHY_CLKHS2LP_TIME(lbcc) (((lbcc) & 0x3ff) << 16)
+#define PHY_CLKLP2HS_TIME(lbcc) ((lbcc) & 0x3ff)
+
+#define PHY_HS2LP_TIME(lbcc) (((lbcc) & 0xff) << 24)
+#define PHY_LP2HS_TIME(lbcc) (((lbcc) & 0xff) << 16)
+#define MAX_RD_TIME(lbcc) ((lbcc) & 0x7fff)
+
+#define PHY_DISFORCEPLL 0
+#define PHY_ENFORCEPLL BIT(3)
+#define PHY_DISABLECLK 0
+#define PHY_ENABLECLK BIT(2)
+#define PHY_RSTZ 0
+#define PHY_UNRSTZ BIT(1)
+#define PHY_SHUTDOWNZ 0
+#define PHY_UNSHUTDOWNZ BIT(0)
+
+#define N_LANES(n) ((((n) - 1) & 0x3) << 0)
+#define PHY_STOP_WAIT_TIME(cycle) (((cycle) & 0xff) << 8)
+
+#define LOCK BIT(0)
+#define STOP_STATE_CLK_LANE BIT(2)
+
+#define PHY_TESTCLK BIT(1)
+#define PHY_UNTESTCLK 0
+#define PHY_TESTCLR BIT(0)
+#define PHY_UNTESTCLR 0
+
+#define PHY_TESTEN BIT(16)
+#define PHY_UNTESTEN 0
+#define PHY_TESTDOUT(n) (((n) & 0xff) << 8)
+#define PHY_TESTDIN(n) (((n) & 0xff) << 0)
+
+#define BYPASS_VCO_RANGE BIT(7)
+#define VCO_RANGE_CON_SEL(val) (((val) & 0x7) << 3)
+#define VCO_IN_CAP_CON_DEFAULT (0x0 << 1)
+#define VCO_IN_CAP_CON_LOW (0x1 << 1)
+#define VCO_IN_CAP_CON_HIGH (0x2 << 1)
+#define REF_BIAS_CUR_SEL BIT(0)
+
+#define CP_CURRENT_3MA BIT(3)
+#define CP_PROGRAM_EN BIT(7)
+#define LPF_PROGRAM_EN BIT(6)
+#define LPF_RESISTORS_20_KOHM 0
+
+#define HSFREQRANGE_SEL(val) (((val) & 0x3f) << 1)
+
+#define INPUT_DIVIDER(val) ((val - 1) & 0x7f)
+#define LOW_PROGRAM_EN 0
+#define HIGH_PROGRAM_EN BIT(7)
+#define LOOP_DIV_LOW_SEL(val) ((val - 1) & 0x1f)
+#define LOOP_DIV_HIGH_SEL(val) (((val - 1) >> 5) & 0x1f)
+#define PLL_LOOP_DIV_EN BIT(5)
+#define PLL_INPUT_DIV_EN BIT(4)
+
+#define POWER_CONTROL BIT(6)
+#define INTERNAL_REG_CURRENT BIT(3)
+#define BIAS_BLOCK_ON BIT(2)
+#define BANDGAP_ON BIT(0)
+
+#define TER_RESISTOR_HIGH BIT(7)
+#define TER_RESISTOR_LOW 0
+#define LEVEL_SHIFTERS_ON BIT(6)
+#define TER_CAL_DONE BIT(5)
+#define SETRD_MAX (0x7 << 2)
+#define POWER_MANAGE BIT(1)
+#define TER_RESISTORS_ON BIT(0)
+
+#define BIASEXTR_SEL(val) ((val) & 0x7)
+#define BANDGAP_SEL(val) ((val) & 0x7)
+#define TLP_PROGRAM_EN BIT(7)
+#define THS_PRE_PROGRAM_EN BIT(7)
+#define THS_ZERO_PROGRAM_EN BIT(6)
+
+#define PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL 0x10
+#define PLL_CP_CONTROL_PLL_LOCK_BYPASS 0x11
+#define PLL_LPF_AND_CP_CONTROL 0x12
+#define PLL_INPUT_DIVIDER_RATIO 0x17
+#define PLL_LOOP_DIVIDER_RATIO 0x18
+#define PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL 0x19
+#define BANDGAP_AND_BIAS_CONTROL 0x20
+#define TERMINATION_RESISTER_CONTROL 0x21
+#define AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY 0x22
+#define HS_RX_CONTROL_OF_LANE_0 0x44
+
+enum mipi_dsi_pixel_format {
+ MIPI_DSI_FMT_RGB888,
+ MIPI_DSI_FMT_RGB666,
+ MIPI_DSI_FMT_RGB666_PACKED,
+ MIPI_DSI_FMT_RGB565,
+};
+
+enum {
+ BANDGAP_97_07,
+ BANDGAP_98_05,
+ BANDGAP_99_02,
+ BANDGAP_100_00,
+ BANDGAP_93_17,
+ BANDGAP_94_15,
+ BANDGAP_95_12,
+ BANDGAP_96_10,
+};
+
+enum {
+ BIASEXTR_87_1,
+ BIASEXTR_91_5,
+ BIASEXTR_95_9,
+ BIASEXTR_100,
+ BIASEXTR_105_94,
+ BIASEXTR_111_88,
+ BIASEXTR_118_8,
+ BIASEXTR_127_7,
+};
+
+enum rk_mipi_dsi_mode {
+ MIPI_DSI_CMD_MODE,
+ MIPI_DSI_VID_MODE,
+};
+
+enum {
+ MIPI_DCS_NOP = 0x00,
+ MIPI_DCS_EXIT_SLEEP_MODE = 0x11,
+ MIPI_DCS_SET_DISPLAY_ON = 0x29,
+};
+
+struct dphy_pll_testdin_map {
+ unsigned int max_mbps;
+ u8 testdin;
+};
+
+struct rk_mipi_dsi {
+ u64 lane_bps; /* per lane */
+ u32 lanes;
+ u32 format;
+ u16 input_div;
+ u16 feedback_div;
+};
+
+void rk_mipi_prepare(const struct edid *edid, u32 display_on_mdelay, u32 video_mode_mdelay);
+#endif
diff --git a/src/soc/rockchip/rk3399/mipi.c b/src/soc/rockchip/rk3399/mipi.c
new file mode 100644
index 0000000000..5c8f4c2e33
--- /dev/null
+++ b/src/soc/rockchip/rk3399/mipi.c
@@ -0,0 +1,436 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Rockchip Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/io.h>
+#include <assert.h>
+#include <console/console.h>
+#include <delay.h>
+#include <device/device.h>
+#include <edid.h>
+#include <gpio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <soc/addressmap.h>
+#include <soc/clock.h>
+#include <soc/display.h>
+#include <soc/mipi.h>
+#include <soc/soc.h>
+#include <timer.h>
+
+static struct rk_mipi_dsi rk_mipi;
+static struct rk_mipi_regs *mipi_regs = (void *)MIPI_BASE;
+
+/*
+ * The controller should generate 2 frames before
+ * preparing the peripheral.
+ */
+static void rk_mipi_dsi_wait_for_two_frames(struct rk_mipi_dsi *dsi,
+ const struct edid *edid)
+{
+ int two_frames;
+ unsigned int refresh = edid->mode.refresh;
+
+ two_frames = div_round_up(MSECS_PER_SEC * 2, refresh);
+ mdelay(two_frames);
+}
+
+static const struct dphy_pll_testdin_map dptdin_map[] = {
+ { 90, 0x00}, { 100, 0x10}, { 110, 0x20}, { 130, 0x01},
+ { 140, 0x11}, { 150, 0x21}, { 170, 0x02}, { 180, 0x12},
+ { 200, 0x22}, { 220, 0x03}, { 240, 0x13}, { 250, 0x23},
+ { 270, 0x04}, { 300, 0x14}, { 330, 0x05}, { 360, 0x15},
+ { 400, 0x25}, { 450, 0x06}, { 500, 0x16}, { 550, 0x07},
+ { 600, 0x17}, { 650, 0x08}, { 700, 0x18}, { 750, 0x09},
+ { 800, 0x19}, { 850, 0x29}, { 900, 0x39}, { 950, 0x0a},
+ {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
+ {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
+ {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
+};
+
+static int max_mbps_to_testdin(unsigned int max_mbps)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dptdin_map); i++)
+ if (dptdin_map[i].max_mbps > max_mbps)
+ return dptdin_map[i].testdin;
+
+ return -1;
+}
+
+static void rk_mipi_dsi_phy_write(struct rk_mipi_dsi *dsi,
+ u8 test_code,
+ u8 test_data)
+{
+ /*
+ * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content
+ * is latched internally as the current test code. Test data is
+ * programmed internally by rising edge on TESTCLK.
+ */
+ write32(&mipi_regs->dsi_phy_tst_ctrl0, PHY_TESTCLK | PHY_UNTESTCLR);
+
+ write32(&mipi_regs->dsi_phy_tst_ctrl1, PHY_TESTEN | PHY_TESTDOUT(0) |
+ PHY_TESTDIN(test_code));
+
+ write32(&mipi_regs->dsi_phy_tst_ctrl0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+
+ write32(&mipi_regs->dsi_phy_tst_ctrl1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
+ PHY_TESTDIN(test_data));
+
+ write32(&mipi_regs->dsi_phy_tst_ctrl0, PHY_TESTCLK | PHY_UNTESTCLR);
+}
+
+static int rk_mipi_dsi_phy_init(struct rk_mipi_dsi *dsi)
+{
+ int ret, testdin, vco;
+
+ int lane_mbps = div_round_up(dsi->lane_bps, USECS_PER_SEC);
+ vco = (lane_mbps < 200) ? 0 : (lane_mbps + 100) / 200;
+
+ testdin = max_mbps_to_testdin(lane_mbps);
+ if (testdin < 0) {
+ printk(BIOS_DEBUG, "failed to get testdin for %dmbps\n",
+ lane_mbps);
+ return testdin;
+ }
+
+ /* Start by clearing PHY state */
+ write32(&mipi_regs->dsi_phy_tst_ctrl0, PHY_UNTESTCLR);
+ write32(&mipi_regs->dsi_phy_tst_ctrl0, PHY_TESTCLR);
+ write32(&mipi_regs->dsi_phy_tst_ctrl0, PHY_UNTESTCLR);
+
+ rk_mipi_dsi_phy_write(dsi, PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL,
+ BYPASS_VCO_RANGE |
+ VCO_RANGE_CON_SEL(vco) |
+ VCO_IN_CAP_CON_LOW |
+ REF_BIAS_CUR_SEL);
+
+ rk_mipi_dsi_phy_write(dsi, PLL_CP_CONTROL_PLL_LOCK_BYPASS,
+ CP_CURRENT_3MA);
+ rk_mipi_dsi_phy_write(dsi, PLL_LPF_AND_CP_CONTROL,
+ CP_PROGRAM_EN |
+ LPF_PROGRAM_EN |
+ LPF_RESISTORS_20_KOHM);
+
+ rk_mipi_dsi_phy_write(dsi, HS_RX_CONTROL_OF_LANE_0,
+ HSFREQRANGE_SEL(testdin));
+ rk_mipi_dsi_phy_write(dsi, PLL_INPUT_DIVIDER_RATIO,
+ INPUT_DIVIDER(dsi->input_div));
+ rk_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
+ LOOP_DIV_LOW_SEL(dsi->feedback_div) |
+ LOW_PROGRAM_EN);
+ rk_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
+ LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
+ HIGH_PROGRAM_EN);
+ rk_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL,
+ PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
+ rk_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
+ LOW_PROGRAM_EN |
+ BIASEXTR_SEL(BIASEXTR_127_7));
+ rk_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
+ HIGH_PROGRAM_EN |
+ BANDGAP_SEL(BANDGAP_96_10));
+ rk_mipi_dsi_phy_write(dsi, BANDGAP_AND_BIAS_CONTROL,
+ POWER_CONTROL | INTERNAL_REG_CURRENT |
+ BIAS_BLOCK_ON | BANDGAP_ON);
+ rk_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
+ TER_RESISTOR_LOW | TER_CAL_DONE |
+ SETRD_MAX | TER_RESISTORS_ON);
+ rk_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
+ TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
+ SETRD_MAX | POWER_MANAGE |
+ TER_RESISTORS_ON);
+
+ write32(&mipi_regs->dsi_phy_rstz, PHY_ENFORCEPLL | PHY_ENABLECLK |
+ PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
+ return ret;
+}
+
+static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
+{
+ switch (fmt) {
+ case MIPI_DSI_FMT_RGB888:
+ case MIPI_DSI_FMT_RGB666:
+ return 24;
+
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ return 18;
+
+ case MIPI_DSI_FMT_RGB565:
+ return 16;
+ }
+
+ return -1;
+}
+
+static int rk_mipi_dsi_get_lane_bps(struct rk_mipi_dsi *dsi,
+ const struct edid *edid)
+{
+ u32 i, pre;
+ u64 pclk, pllref, tmp, target_bps;
+ u32 m = 1, n = 1;
+ u32 max_bps = 1500 * MHz;
+ int bpp;
+
+ bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
+ if (bpp < 0) {
+ printk(BIOS_DEBUG, "failed to get bpp for pixel format %d\n",
+ dsi->format);
+ return bpp;
+ }
+ pclk = edid->mode.pixel_clock * MSECS_PER_SEC;
+ /* take 1 / 0.8, since mbps must bigger than bandwidth of RGB */
+ target_bps = pclk / dsi->lanes * bpp / 8 * 10;
+ if (target_bps >= max_bps) {
+ printk(BIOS_DEBUG, "DPHY clock frequency is out of range\n");
+ return -1;
+ }
+ pllref = OSC_HZ;
+ tmp = pllref;
+ /*
+ * The limits on the PLL divisor are:
+ *
+ * 5MHz <= (pllref / n) <= 40MHz
+ */
+ for (i = pllref / (5 * MHz); i > div_round_up(pllref, 40 * MHz); i--) {
+ pre = pllref / i;
+ if ((tmp > (target_bps % pre)) && (target_bps / pre < 512)) {
+ tmp = target_bps % pre;
+ n = i;
+ m = target_bps / pre;
+ }
+ if (tmp == 0)
+ break;
+ }
+ dsi->lane_bps = pllref / n * m;
+ dsi->input_div = n;
+ dsi->feedback_div = m;
+
+ return 0;
+}
+
+static void rk_mipi_dsi_dpi_config(struct rk_mipi_dsi *dsi)
+{
+ u32 color = 0;
+
+ switch (dsi->format) {
+ case MIPI_DSI_FMT_RGB888:
+ color = DPI_COLOR_CODING_24BIT;
+ break;
+ case MIPI_DSI_FMT_RGB666:
+ color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
+ break;
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ color = DPI_COLOR_CODING_18BIT_1;
+ break;
+ case MIPI_DSI_FMT_RGB565:
+ color = DPI_COLOR_CODING_16BIT_1;
+ break;
+ }
+
+ write32(&mipi_regs->dsi_dpi_vcid, 0);
+ write32(&mipi_regs->dsi_dpi_color_coding, color);
+
+ write32(&mipi_regs->dsi_dpi_cfg_pol, 0);
+
+ write32(&mipi_regs->dsi_dpi_lp_cmd_tim, OUTVACT_LPCMD_TIME(4) |
+ INVACT_LPCMD_TIME(4));
+}
+
+static void rk_mipi_dsi_packet_handler_config(struct rk_mipi_dsi *dsi)
+{
+ write32(&mipi_regs->dsi_pckhdl_cfg, EN_CRC_RX | EN_ECC_RX | EN_BTA);
+}
+
+static void rk_mipi_dsi_video_mode_config(struct rk_mipi_dsi *dsi)
+{
+ write32(&mipi_regs->dsi_vid_mode_cfg,
+ VID_MODE_TYPE_BURST_SYNC_PULSES | ENABLE_LOW_POWER);
+}
+
+static void rk_mipi_dsi_video_packet_config(struct rk_mipi_dsi *dsi)
+{
+ write32(&mipi_regs->dsi_vid_pkt_size, VID_PKT_SIZE(0x300));
+}
+
+static void rk_mipi_dsi_command_mode_config(struct rk_mipi_dsi *dsi)
+{
+ write32(&mipi_regs->dsi_to_cnt_cfg,
+ HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
+ write32(&mipi_regs->dsi_bta_to_cnt, 0xd00);
+ write32(&mipi_regs->dsi_cmd_mode_cfg, CMD_MODE_ALL_LP);
+ write32(&mipi_regs->dsi_mode_cfg, ENABLE_CMD_MODE);
+}
+
+/* Get lane byte clock cycles. */
+static u32 rk_mipi_dsi_get_hcomponent_lbcc(struct rk_mipi_dsi *dsi,
+ u32 hcomponent,
+ const struct edid *edid)
+{
+ u32 lbcc;
+ u64 lbcc_tmp;
+
+ lbcc_tmp = hcomponent * dsi->lane_bps / (8 * MSECS_PER_SEC);
+ lbcc = div_round_up(lbcc_tmp, edid->mode.pixel_clock);
+
+ return lbcc;
+}
+
+static void rk_mipi_dsi_line_timer_config(struct rk_mipi_dsi *dsi,
+ const struct edid *edid)
+{
+ u32 htotal, hsa, hbp, lbcc;
+
+ htotal = edid->mode.ha + edid->mode.hbl;
+ hsa = edid->mode.hspw;
+ hbp = edid->mode.hbl - edid->mode.hso - edid->mode.hspw;
+
+ lbcc = rk_mipi_dsi_get_hcomponent_lbcc(dsi, htotal, edid);
+ write32(&mipi_regs->dsi_vid_hline_time, lbcc);
+
+ lbcc = rk_mipi_dsi_get_hcomponent_lbcc(dsi, hsa, edid);
+ write32(&mipi_regs->dsi_vid_hsa_time, lbcc);
+ lbcc = rk_mipi_dsi_get_hcomponent_lbcc(dsi, hbp, edid);
+ write32(&mipi_regs->dsi_vid_hbp_time, lbcc);
+}
+
+static void rk_mipi_dsi_vertical_timing_config(struct rk_mipi_dsi *dsi,
+ const struct edid *edid)
+{
+ u32 vactive, vsa, vfp, vbp;
+
+ vactive = edid->mode.va;
+ vsa = edid->mode.vspw;
+ vfp = edid->mode.vso;
+ vbp = edid->mode.vbl - edid->mode.vso - edid->mode.vspw;
+
+ write32(&mipi_regs->dsi_vid_vactive_lines, vactive);
+ write32(&mipi_regs->dsi_vid_vsa_lines, vsa);
+ write32(&mipi_regs->dsi_vid_vfp_lines, vfp);
+ write32(&mipi_regs->dsi_vid_vbp_lines, vbp);
+}
+
+static void rk_mipi_dsi_dphy_timing_config(struct rk_mipi_dsi *dsi)
+{
+ /*
+ * HS-PREPARE: 40ns + 4 * UI ~ 85ns + 6 * UI
+ * HS-EXIT: 100ns
+ */
+ write32(&mipi_regs->dsi_phy_tmr_cfg, PHY_HS2LP_TIME(0x40) |
+ PHY_LP2HS_TIME(0x40) |
+ MAX_RD_TIME(10000));
+
+ write32(&mipi_regs->dsi_phy_tmr_lpclk_cfg, PHY_CLKHS2LP_TIME(0x40) |
+ PHY_CLKLP2HS_TIME(0x40));
+}
+
+static void rk_mipi_dsi_clear_err(struct rk_mipi_dsi *dsi)
+{
+ read32(&mipi_regs->dsi_int_st0);
+ read32(&mipi_regs->dsi_int_st1);
+ write32(&mipi_regs->dsi_int_msk0, 0);
+ write32(&mipi_regs->dsi_int_msk1, 0);
+}
+
+static void rk_mipi_dsi_dphy_interface_config(struct rk_mipi_dsi *dsi)
+{
+ write32(&mipi_regs->dsi_phy_if_cfg, PHY_STOP_WAIT_TIME(0x20) |
+ N_LANES(dsi->lanes));
+}
+
+static void rk_mipi_dsi_set_mode(struct rk_mipi_dsi *dsi,
+ enum rk_mipi_dsi_mode mode)
+{
+ write32(&mipi_regs->dsi_pwr_up, RESET);
+ if (mode == MIPI_DSI_CMD_MODE) {
+ write32(&mipi_regs->dsi_mode_cfg, ENABLE_CMD_MODE);
+ } else {
+ write32(&mipi_regs->dsi_mode_cfg, ENABLE_VIDEO_MODE);
+ rk_mipi_dsi_video_mode_config(dsi);
+ write32(&mipi_regs->dsi_lpclk_ctrl, PHY_TXREQUESTCLKHS);
+ }
+ write32(&mipi_regs->dsi_pwr_up, POWERUP);
+}
+
+static void rk_mipi_dsi_init(struct rk_mipi_dsi *dsi)
+{
+ /*
+ * The maximum permitted escape clock is 20MHz and it is derived from
+ * lanebyteclk, which is running at "lane_mbps / 8". Thus we want:
+ *
+ * (lane_mbps >> 3) / esc_clk_division < 20
+ * which is:
+ * (lane_mbps >> 3) / 20 > esc_clk_division
+ */
+ u32 esc_clk_division = div_round_up(dsi->lane_bps, 8 * 20 * USECS_PER_SEC);
+
+ write32(&mipi_regs->dsi_pwr_up, RESET);
+ write32(&mipi_regs->dsi_phy_rstz, PHY_DISFORCEPLL | PHY_DISABLECLK |
+ PHY_RSTZ | PHY_SHUTDOWNZ);
+ write32(&mipi_regs->dsi_clk_cfg,
+ TO_CLK_DIVIDSION(10) |
+ TX_ESC_CLK_DIVIDSION(esc_clk_division));
+}
+
+static int rk_mipi_dsi_dcs_transfer(struct rk_mipi_dsi *dsi, u32 hdr_val)
+{
+ int ret;
+
+ hdr_val = GEN_HDATA(hdr_val) | GEN_HTYPE(0x05);
+ ret = read32(&mipi_regs->dsi_cmd_pkt_status);
+ if (ret < 0) {
+ printk(BIOS_DEBUG, "failed to get available command FIFO\n");
+ return ret;
+ }
+
+ write32(&mipi_regs->dsi_lpclk_ctrl, 0);
+ write32(&mipi_regs->dsi_cmd_mode_cfg, CMD_MODE_ALL_LP);
+ write32(&mipi_regs->dsi_gen_hdr, hdr_val);
+
+ return 0;
+}
+
+void rk_mipi_prepare(const struct edid *edid, u32 display_on_mdelay, u32 video_mode_mdelay)
+{
+ rk_mipi.lanes = 4;
+ rk_mipi.format = MIPI_DSI_FMT_RGB888;
+ if (rk_mipi_dsi_get_lane_bps(&rk_mipi, edid) < 0)
+ return;
+
+ rk_mipi_dsi_init(&rk_mipi);
+ rk_mipi_dsi_dpi_config(&rk_mipi);
+ rk_mipi_dsi_packet_handler_config(&rk_mipi);
+ rk_mipi_dsi_video_mode_config(&rk_mipi);
+ rk_mipi_dsi_video_packet_config(&rk_mipi);
+ rk_mipi_dsi_command_mode_config(&rk_mipi);
+ rk_mipi_dsi_line_timer_config(&rk_mipi, edid);
+ rk_mipi_dsi_vertical_timing_config(&rk_mipi, edid);
+ rk_mipi_dsi_dphy_timing_config(&rk_mipi);
+ rk_mipi_dsi_dphy_interface_config(&rk_mipi);
+ rk_mipi_dsi_clear_err(&rk_mipi);
+ rk_mipi_dsi_phy_init(&rk_mipi);
+ rk_mipi_dsi_wait_for_two_frames(&rk_mipi, edid);
+
+ rk_mipi_dsi_set_mode(&rk_mipi, MIPI_DSI_CMD_MODE);
+ if (rk_mipi_dsi_dcs_transfer(&rk_mipi, MIPI_DCS_EXIT_SLEEP_MODE) < 0)
+ return;
+ mdelay(display_on_mdelay);
+ if (rk_mipi_dsi_dcs_transfer(&rk_mipi, MIPI_DCS_SET_DISPLAY_ON) < 0)
+ return;
+ mdelay(video_mode_mdelay);
+
+ rk_mipi_dsi_set_mode(&rk_mipi, MIPI_DSI_VID_MODE);
+}