summaryrefslogtreecommitdiff
path: root/src/soc/samsung/exynos5420
diff options
context:
space:
mode:
authorJulius Werner <jwerner@chromium.org>2015-02-19 14:51:15 -0800
committerPatrick Georgi <pgeorgi@google.com>2015-04-21 08:22:28 +0200
commit2f37bd65518865688b9234afce0d467508d6f465 (patch)
treeeba5ed799de966299602b30c70d51dd40eaadd73 /src/soc/samsung/exynos5420
parent1f60f971fc89ef841e81b978964b38278d597b1d (diff)
downloadcoreboot-2f37bd65518865688b9234afce0d467508d6f465.tar.xz
arm(64): Globally replace writel(v, a) with write32(a, v)
This patch is a raw application of the following spatch to src/: @@ expression A, V; @@ - writel(V, A) + write32(A, V) @@ expression A, V; @@ - writew(V, A) + write16(A, V) @@ expression A, V; @@ - writeb(V, A) + write8(A, V) @@ expression A; @@ - readl(A) + read32(A) @@ expression A; @@ - readb(A) + read8(A) BRANCH=none BUG=chromium:444723 TEST=None (depends on next patch) Change-Id: I5dd96490c85ee2bcbc669f08bc6fff0ecc0f9e27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 64f643da95d85954c4d4ea91c34a5c69b9b08eb6 Original-Change-Id: I366a2eb5b3a0df2279ebcce572fe814894791c42 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254864 Reviewed-on: http://review.coreboot.org/9836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/soc/samsung/exynos5420')
-rw-r--r--src/soc/samsung/exynos5420/clock.c92
-rw-r--r--src/soc/samsung/exynos5420/clock_init.c200
-rw-r--r--src/soc/samsung/exynos5420/dmc_common.c42
-rw-r--r--src/soc/samsung/exynos5420/dmc_init_ddr3.c200
-rw-r--r--src/soc/samsung/exynos5420/dp_lowlevel.c2
-rw-r--r--src/soc/samsung/exynos5420/fimd.c4
-rw-r--r--src/soc/samsung/exynos5420/gpio.c28
-rw-r--r--src/soc/samsung/exynos5420/i2c.c72
-rw-r--r--src/soc/samsung/exynos5420/power.c2
-rw-r--r--src/soc/samsung/exynos5420/smp.c22
-rw-r--r--src/soc/samsung/exynos5420/spi.c18
-rw-r--r--src/soc/samsung/exynos5420/timer.c7
-rw-r--r--src/soc/samsung/exynos5420/tmu.c20
-rw-r--r--src/soc/samsung/exynos5420/trustzone.c10
-rw-r--r--src/soc/samsung/exynos5420/uart.c20
-rw-r--r--src/soc/samsung/exynos5420/usb.c69
16 files changed, 384 insertions, 424 deletions
diff --git a/src/soc/samsung/exynos5420/clock.c b/src/soc/samsung/exynos5420/clock.c
index f6c7845c54..971364ddfe 100644
--- a/src/soc/samsung/exynos5420/clock.c
+++ b/src/soc/samsung/exynos5420/clock.c
@@ -47,34 +47,34 @@ unsigned long get_pll_clk(int pllreg)
switch (pllreg) {
case APLL:
- r = readl(&exynos_clock->apll_con0);
+ r = read32(&exynos_clock->apll_con0);
break;
case MPLL:
- r = readl(&exynos_clock->mpll_con0);
+ r = read32(&exynos_clock->mpll_con0);
break;
case EPLL:
- r = readl(&exynos_clock->epll_con0);
- k = readl(&exynos_clock->epll_con1);
+ r = read32(&exynos_clock->epll_con0);
+ k = read32(&exynos_clock->epll_con1);
break;
case VPLL:
- r = readl(&exynos_clock->vpll_con0);
- k = readl(&exynos_clock->vpll_con1);
+ r = read32(&exynos_clock->vpll_con0);
+ k = read32(&exynos_clock->vpll_con1);
break;
case BPLL:
- r = readl(&exynos_clock->bpll_con0);
+ r = read32(&exynos_clock->bpll_con0);
break;
case RPLL:
- r = readl(&exynos_clock->rpll_con0);
- k = readl(&exynos_clock->rpll_con1);
+ r = read32(&exynos_clock->rpll_con0);
+ k = read32(&exynos_clock->rpll_con1);
break;
case SPLL:
- r = readl(&exynos_clock->spll_con0);
+ r = read32(&exynos_clock->spll_con0);
break;
case CPLL:
- r = readl(&exynos_clock->cpll_con0);
+ r = read32(&exynos_clock->cpll_con0);
break;
case DPLL:
- r = readl(&exynos_clock->dpll_con0);
+ r = read32(&exynos_clock->dpll_con0);
break;
default:
printk(BIOS_DEBUG, "Unsupported PLL (%d)\n", pllreg);
@@ -169,48 +169,48 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
switch (peripheral) {
case PERIPH_ID_UART0:
- src = (readl(&exynos_clock->clk_src_peric0) >> 4) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 8) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 4) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 8) & 0xf;
break;
case PERIPH_ID_UART1:
- src = (readl(&exynos_clock->clk_src_peric0) >> 8) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 12) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 8) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 12) & 0xf;
break;
case PERIPH_ID_UART2:
- src = (readl(&exynos_clock->clk_src_peric0) >> 12) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 16) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 12) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 16) & 0xf;
break;
case PERIPH_ID_UART3:
- src = (readl(&exynos_clock->clk_src_peric0) >> 16) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 20) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 16) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 20) & 0xf;
break;
case PERIPH_ID_PWM0:
case PERIPH_ID_PWM1:
case PERIPH_ID_PWM2:
case PERIPH_ID_PWM3:
case PERIPH_ID_PWM4:
- src = (readl(&exynos_clock->clk_src_peric0) >> 24) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric0) >> 28) & 0x7;
+ src = (read32(&exynos_clock->clk_src_peric0) >> 24) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric0) >> 28) & 0x7;
break;
case PERIPH_ID_SPI0:
- src = (readl(&exynos_clock->clk_src_peric1) >> 20) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric1) >> 20) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric1) >> 20) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric1) >> 20) & 0xf;
break;
case PERIPH_ID_SPI1:
- src = (readl(&exynos_clock->clk_src_peric1) >> 24) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric1) >> 24) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric1) >> 24) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric1) >> 24) & 0xf;
break;
case PERIPH_ID_SPI2:
- src = (readl(&exynos_clock->clk_src_peric1) >> 28) & 0x7;
- div = (readl(&exynos_clock->clk_div_peric1) >> 28) & 0xf;
+ src = (read32(&exynos_clock->clk_src_peric1) >> 28) & 0x7;
+ div = (read32(&exynos_clock->clk_div_peric1) >> 28) & 0xf;
break;
case PERIPH_ID_SPI3: /* aka SPI0_ISP */
- src = (readl(&exynos_clock->clk_src_isp) >> 16) & 0x7;
- div = (readl(&exynos_clock->clk_div_isp0) >> 0) & 0x7;
+ src = (read32(&exynos_clock->clk_src_isp) >> 16) & 0x7;
+ div = (read32(&exynos_clock->clk_div_isp0) >> 0) & 0x7;
break;
case PERIPH_ID_SPI4: /* aka SPI1_ISP */
- src = (readl(&exynos_clock->clk_src_isp) >> 12) & 0x7;
- div = (readl(&exynos_clock->clk_div_isp1) >> 4) & 0x7;
+ src = (read32(&exynos_clock->clk_src_isp) >> 12) & 0x7;
+ div = (read32(&exynos_clock->clk_div_isp1) >> 4) & 0x7;
break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
@@ -229,7 +229,7 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
* TODO: Add a helper function like with the peripheral clock
* select fields?
*/
- src = (readl(&exynos_clock->clk_src_top1) >> 8) & 0x3;
+ src = (read32(&exynos_clock->clk_src_top1) >> 8) & 0x3;
if (src == 0x0)
src = CPLL;
else if (src == 0x1)
@@ -240,7 +240,7 @@ unsigned long clock_get_periph_rate(enum periph_id peripheral)
return -1;
sclk = get_pll_clk(src);
- div = ((readl(&exynos_clock->clk_div_top1) >> 8) & 0x3f) + 1;
+ div = ((read32(&exynos_clock->clk_div_top1) >> 8) & 0x3f) + 1;
return sclk / div;
default:
printk(BIOS_DEBUG, "%s: invalid peripheral %d",
@@ -267,7 +267,7 @@ unsigned long get_arm_clk(void)
unsigned int arm_ratio;
unsigned int arm2_ratio;
- div = readl(&exynos_clock->clk_div_cpu0);
+ div = read32(&exynos_clock->clk_div_cpu0);
/* ARM_RATIO: [2:0], ARM2_RATIO: [30:28] */
arm_ratio = (div >> 0) & 0x7;
@@ -286,7 +286,7 @@ static unsigned long get_mmc_clk(int dev_index)
unsigned int sel, ratio;
int shift = 0;
- sel = readl(&exynos_clock->clk_src_fsys);
+ sel = read32(&exynos_clock->clk_src_fsys);
sel = (sel >> ((dev_index * 4) + 8)) & 0x7;
if (sel == 0x3)
@@ -296,7 +296,7 @@ static unsigned long get_mmc_clk(int dev_index)
else
return 0;
- ratio = readl(&exynos_clock->clk_div_fsys1);
+ ratio = read32(&exynos_clock->clk_div_fsys1);
shift = dev_index * 10;
@@ -316,10 +316,10 @@ void set_mmc_clk(int dev_index, unsigned int div)
addr = &exynos_clock->clk_div_fsys1;
shift = dev_index * 10;
- val = readl(addr);
+ val = read32(addr);
val &= ~(0x3ff << shift);
val |= (div & 0x3ff) << shift;
- writel(val, addr);
+ write32(addr, val);
}
/* Set DW MMC Controller clock */
@@ -546,10 +546,10 @@ int clock_set_mshci(enum periph_id peripheral)
printk(BIOS_DEBUG, "invalid peripheral\n");
return -1;
}
- tmp = readl(addr) & ~0xff0f;
+ tmp = read32(addr) & ~0xff0f;
for (i = 0; i <= 0xf; i++) {
if ((clock / (i + 1)) <= 400) {
- writel(tmp | i << 0, addr);
+ write32(addr, tmp | i << 0);
break;
}
}
@@ -563,7 +563,7 @@ int clock_epll_set_rate(unsigned long rate)
unsigned int lockcnt;
struct stopwatch sw;
- epll_con = readl(&exynos_clock->epll_con0);
+ epll_con = read32(&exynos_clock->epll_con0);
epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK <<
EPLL_CON0_LOCK_DET_EN_SHIFT) |
EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT |
@@ -591,13 +591,13 @@ int clock_epll_set_rate(unsigned long rate)
*/
lockcnt = 3000 * epll_div[i].p_div;
- writel(lockcnt, &exynos_clock->epll_lock);
- writel(epll_con, &exynos_clock->epll_con0);
- writel(epll_con_k, &exynos_clock->epll_con1);
+ write32(&exynos_clock->epll_lock, lockcnt);
+ write32(&exynos_clock->epll_con0, epll_con);
+ write32(&exynos_clock->epll_con1, epll_con_k);
stopwatch_init_msecs_expire(&sw, TIMEOUT_EPLL_LOCK);
- while (!(readl(&exynos_clock->epll_con0) &
+ while (!(read32(&exynos_clock->epll_con0) &
(0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) {
if (stopwatch_expired(&sw)) {
printk(BIOS_DEBUG, "%s: Timeout waiting for EPLL lock\n", __func__);
diff --git a/src/soc/samsung/exynos5420/clock_init.c b/src/soc/samsung/exynos5420/clock_init.c
index 25b8beecd1..c5b4aaaa3f 100644
--- a/src/soc/samsung/exynos5420/clock_init.c
+++ b/src/soc/samsung/exynos5420/clock_init.c
@@ -35,186 +35,186 @@ void system_clock_init(void)
exynos_mct->g_tcon |= (1 << 8);
/* PLL locktime */
- writel(APLL_LOCK_VAL, &exynos_clock->apll_lock);
- writel(MPLL_LOCK_VAL, &exynos_clock->mpll_lock);
- writel(BPLL_LOCK_VAL, &exynos_clock->bpll_lock);
- writel(CPLL_LOCK_VAL, &exynos_clock->cpll_lock);
- writel(DPLL_LOCK_VAL, &exynos_clock->dpll_lock);
- writel(EPLL_LOCK_VAL, &exynos_clock->epll_lock);
- writel(VPLL_LOCK_VAL, &exynos_clock->vpll_lock);
- writel(IPLL_LOCK_VAL, &exynos_clock->ipll_lock);
- writel(SPLL_LOCK_VAL, &exynos_clock->spll_lock);
- writel(KPLL_LOCK_VAL, &exynos_clock->kpll_lock);
- writel(RPLL_LOCK_VAL, &exynos_clock->rpll_lock);
+ write32(&exynos_clock->apll_lock, APLL_LOCK_VAL);
+ write32(&exynos_clock->mpll_lock, MPLL_LOCK_VAL);
+ write32(&exynos_clock->bpll_lock, BPLL_LOCK_VAL);
+ write32(&exynos_clock->cpll_lock, CPLL_LOCK_VAL);
+ write32(&exynos_clock->dpll_lock, DPLL_LOCK_VAL);
+ write32(&exynos_clock->epll_lock, EPLL_LOCK_VAL);
+ write32(&exynos_clock->vpll_lock, VPLL_LOCK_VAL);
+ write32(&exynos_clock->ipll_lock, IPLL_LOCK_VAL);
+ write32(&exynos_clock->spll_lock, SPLL_LOCK_VAL);
+ write32(&exynos_clock->kpll_lock, KPLL_LOCK_VAL);
+ write32(&exynos_clock->rpll_lock, RPLL_LOCK_VAL);
setbits_le32(&exynos_clock->clk_src_cpu, MUX_HPM_SEL_MASK);
- writel(0, &exynos_clock->clk_src_top6);
+ write32(&exynos_clock->clk_src_top6, 0);
- writel(0, &exynos_clock->clk_src_cdrex);
- writel(SRC_KFC_HPM_SEL, &exynos_clock->clk_src_kfc);
- writel(HPM_RATIO, &exynos_clock->clk_div_cpu1);
- writel(CLK_DIV_CPU0_VAL, &exynos_clock->clk_div_cpu0);
+ write32(&exynos_clock->clk_src_cdrex, 0);
+ write32(&exynos_clock->clk_src_kfc, SRC_KFC_HPM_SEL);
+ write32(&exynos_clock->clk_div_cpu1, HPM_RATIO);
+ write32(&exynos_clock->clk_div_cpu0, CLK_DIV_CPU0_VAL);
/* switch A15 clock source to OSC clock before changing APLL */
clrbits_le32(&exynos_clock->clk_src_cpu, APLL_FOUT);
/* Set APLL */
- writel(APLL_CON1_VAL, &exynos_clock->apll_con1);
+ write32(&exynos_clock->apll_con1, APLL_CON1_VAL);
val = set_pll(225, 3, 0); /* FOUT=1800MHz */
- writel(val, &exynos_clock->apll_con0);
- while ((readl(&exynos_clock->apll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->apll_con0, val);
+ while ((read32(&exynos_clock->apll_con0) & PLL_LOCKED) == 0)
;
/* now it is safe to switch to APLL */
setbits_le32(&exynos_clock->clk_src_cpu, APLL_FOUT);
- writel(SRC_KFC_HPM_SEL, &exynos_clock->clk_src_kfc);
- writel(CLK_DIV_KFC_VAL, &exynos_clock->clk_div_kfc0);
+ write32(&exynos_clock->clk_src_kfc, SRC_KFC_HPM_SEL);
+ write32(&exynos_clock->clk_div_kfc0, CLK_DIV_KFC_VAL);
/* switch A7 clock source to OSC clock before changing KPLL */
clrbits_le32(&exynos_clock->clk_src_kfc, KPLL_FOUT);
/* Set KPLL*/
- writel(KPLL_CON1_VAL, &exynos_clock->kpll_con1);
+ write32(&exynos_clock->kpll_con1, KPLL_CON1_VAL);
val = set_pll(0x190, 0x4, 0x2);
- writel(val, &exynos_clock->kpll_con0);
- while ((readl(&exynos_clock->kpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->kpll_con0, val);
+ while ((read32(&exynos_clock->kpll_con0) & PLL_LOCKED) == 0)
;
/* now it is safe to switch to KPLL */
setbits_le32(&exynos_clock->clk_src_kfc, KPLL_FOUT);
/* Set MPLL */
- writel(MPLL_CON1_VAL, &exynos_clock->mpll_con1);
+ write32(&exynos_clock->mpll_con1, MPLL_CON1_VAL);
val = set_pll(0xc8, 0x3, 0x1);
- writel(val, &exynos_clock->mpll_con0);
- while ((readl(&exynos_clock->mpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->mpll_con0, val);
+ while ((read32(&exynos_clock->mpll_con0) & PLL_LOCKED) == 0)
;
/* Set DPLL */
- writel(DPLL_CON1_VAL, &exynos_clock->dpll_con1);
+ write32(&exynos_clock->dpll_con1, DPLL_CON1_VAL);
val = set_pll(0x190, 0x4, 0x2);
- writel(val, &exynos_clock->dpll_con0);
- while ((readl(&exynos_clock->dpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->dpll_con0, val);
+ while ((read32(&exynos_clock->dpll_con0) & PLL_LOCKED) == 0)
;
/* Set EPLL */
- writel(EPLL_CON2_VAL, &exynos_clock->epll_con2);
- writel(EPLL_CON1_VAL, &exynos_clock->epll_con1);
+ write32(&exynos_clock->epll_con2, EPLL_CON2_VAL);
+ write32(&exynos_clock->epll_con1, EPLL_CON1_VAL);
val = set_pll(0x64, 0x2, 0x1);
- writel(val, &exynos_clock->epll_con0);
- while ((readl(&exynos_clock->epll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->epll_con0, val);
+ while ((read32(&exynos_clock->epll_con0) & PLL_LOCKED) == 0)
;
/* Set CPLL */
- writel(CPLL_CON1_VAL, &exynos_clock->cpll_con1);
+ write32(&exynos_clock->cpll_con1, CPLL_CON1_VAL);
val = set_pll(0xde, 0x4, 0x1);
- writel(val, &exynos_clock->cpll_con0);
- while ((readl(&exynos_clock->cpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->cpll_con0, val);
+ while ((read32(&exynos_clock->cpll_con0) & PLL_LOCKED) == 0)
;
/* Set IPLL */
- writel(IPLL_CON1_VAL, &exynos_clock->ipll_con1);
+ write32(&exynos_clock->ipll_con1, IPLL_CON1_VAL);
val = set_pll(0xB9, 0x3, 0x2);
- writel(val, &exynos_clock->ipll_con0);
- while ((readl(&exynos_clock->ipll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->ipll_con0, val);
+ while ((read32(&exynos_clock->ipll_con0) & PLL_LOCKED) == 0)
;
/* Set VPLL */
- writel(VPLL_CON1_VAL, &exynos_clock->vpll_con1);
+ write32(&exynos_clock->vpll_con1, VPLL_CON1_VAL);
val = set_pll(0xd7, 0x3, 0x2);
- writel(val, &exynos_clock->vpll_con0);
- while ((readl(&exynos_clock->vpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->vpll_con0, val);
+ while ((read32(&exynos_clock->vpll_con0) & PLL_LOCKED) == 0)
;
/* Set BPLL */
- writel(BPLL_CON1_VAL, &exynos_clock->bpll_con1);
+ write32(&exynos_clock->bpll_con1, BPLL_CON1_VAL);
val = set_pll(0xc8, 0x3, 0x1);
- writel(val, &exynos_clock->bpll_con0);
- while ((readl(&exynos_clock->bpll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->bpll_con0, val);
+ while ((read32(&exynos_clock->bpll_con0) & PLL_LOCKED) == 0)
;
/* Set SPLL */
- writel(SPLL_CON1_VAL, &exynos_clock->spll_con1);
+ write32(&exynos_clock->spll_con1, SPLL_CON1_VAL);
val = set_pll(200, 0x3, 0x2); /* 400MHz */
- writel(val, &exynos_clock->spll_con0);
- while ((readl(&exynos_clock->spll_con0) & PLL_LOCKED) == 0)
+ write32(&exynos_clock->spll_con0, val);
+ while ((read32(&exynos_clock->spll_con0) & PLL_LOCKED) == 0)
;
/* We use RPLL as the source for FIMD video stream clock */
- writel(RPLL_CON1_VAL, &exynos_clock->rpll_con1);
- writel(RPLL_CON2_VAL, &exynos_clock->rpll_con2);
+ write32(&exynos_clock->rpll_con1, RPLL_CON1_VAL);
+ write32(&exynos_clock->rpll_con2, RPLL_CON2_VAL);
/* computed by gabe from first principles; u-boot is probably
* wrong again
*/
val = set_pll(0xa0, 0x3, 0x2);
- writel(val, &exynos_clock->rpll_con0);
+ write32(&exynos_clock->rpll_con0, val);
/* note: this is a meaningless exercise. The hardware lock
* detection does not work. So this just spins for some
* time and is done. NO indication of success should attach
* to this or any other spin on a con0 value.
*/
- while ((readl(&exynos_clock->rpll_con0) & PLL_LOCKED) == 0)
+ while ((read32(&exynos_clock->rpll_con0) & PLL_LOCKED) == 0)
;
- writel(CLK_DIV_CDREX0_VAL, &exynos_clock->clk_div_cdrex0);
- writel(CLK_DIV_CDREX1_VAL, &exynos_clock->clk_div_cdrex1);
+ write32(&exynos_clock->clk_div_cdrex0, CLK_DIV_CDREX0_VAL);
+ write32(&exynos_clock->clk_div_cdrex1, CLK_DIV_CDREX1_VAL);
- writel(CLK_SRC_TOP0_VAL, &exynos_clock->clk_src_top0);
- writel(CLK_SRC_TOP1_VAL, &exynos_clock->clk_src_top1);
- writel(CLK_SRC_TOP2_VAL, &exynos_clock->clk_src_top2);
- writel(CLK_SRC_TOP7_VAL, &exynos_clock->clk_src_top7);
+ write32(&exynos_clock->clk_src_top0, CLK_SRC_TOP0_VAL);
+ write32(&exynos_clock->clk_src_top1, CLK_SRC_TOP1_VAL);
+ write32(&exynos_clock->clk_src_top2, CLK_SRC_TOP2_VAL);
+ write32(&exynos_clock->clk_src_top7, CLK_SRC_TOP7_VAL);
- writel(CLK_DIV_TOP0_VAL, &exynos_clock->clk_div_top0);
- writel(CLK_DIV_TOP1_VAL, &exynos_clock->clk_div_top1);
- writel(CLK_DIV_TOP2_VAL, &exynos_clock->clk_div_top2);
+ write32(&exynos_clock->clk_div_top0, CLK_DIV_TOP0_VAL);
+ write32(&exynos_clock->clk_div_top1, CLK_DIV_TOP1_VAL);
+ write32(&exynos_clock->clk_div_top2, CLK_DIV_TOP2_VAL);
- writel(0, &exynos_clock->clk_src_top10);
- writel(0, &exynos_clock->clk_src_top11);
- writel(0, &exynos_clock->clk_src_top12);
+ write32(&exynos_clock->clk_src_top10, 0);
+ write32(&exynos_clock->clk_src_top11, 0);
+ write32(&exynos_clock->clk_src_top12, 0);
- writel(CLK_SRC_TOP3_VAL, &exynos_clock->clk_src_top3);
- writel(CLK_SRC_TOP4_VAL, &exynos_clock->clk_src_top4);
- writel(CLK_SRC_TOP5_VAL, &exynos_clock->clk_src_top5);
+ write32(&exynos_clock->clk_src_top3, CLK_SRC_TOP3_VAL);
+ write32(&exynos_clock->clk_src_top4, CLK_SRC_TOP4_VAL);
+ write32(&exynos_clock->clk_src_top5, CLK_SRC_TOP5_VAL);
/* DISP1 BLK CLK SELECTION */
- writel(CLK_SRC_DISP1_0_VAL, &exynos_clock->clk_src_disp10);
- writel(CLK_DIV_DISP1_0_VAL, &exynos_clock->clk_div_disp10);
+ write32(&exynos_clock->clk_src_disp10, CLK_SRC_DISP1_0_VAL);
+ write32(&exynos_clock->clk_div_disp10, CLK_DIV_DISP1_0_VAL);
/* AUDIO BLK */
- writel(AUDIO0_SEL_EPLL, &exynos_clock->clk_src_mau);
- writel(DIV_MAU_VAL, &exynos_clock->clk_div_mau);
+ write32(&exynos_clock->clk_src_mau, AUDIO0_SEL_EPLL);
+ write32(&exynos_clock->clk_div_mau, DIV_MAU_VAL);
/* FSYS */
- writel(CLK_SRC_FSYS0_VAL, &exynos_clock->clk_src_fsys);
- writel(CLK_DIV_FSYS0_VAL, &exynos_clock->clk_div_fsys0);
- writel(CLK_DIV_FSYS1_VAL, &exynos_clock->clk_div_fsys1);
- writel(CLK_DIV_FSYS2_VAL, &exynos_clock->clk_div_fsys2);
-
- writel(CLK_SRC_ISP_VAL, &exynos_clock->clk_src_isp);
- writel(CLK_DIV_ISP0_VAL, &exynos_clock->clk_div_isp0);
- writel(CLK_DIV_ISP1_VAL, &exynos_clock->clk_div_isp1);
-
- writel(CLK_SRC_PERIC0_VAL, &exynos_clock->clk_src_peric0);
- writel(CLK_SRC_PERIC1_VAL, &exynos_clock->clk_src_peric1);
-
- writel(CLK_DIV_PERIC0_VAL, &exynos_clock->clk_div_peric0);
- writel(CLK_DIV_PERIC1_VAL, &exynos_clock->clk_div_peric1);
- writel(CLK_DIV_PERIC2_VAL, &exynos_clock->clk_div_peric2);
- writel(CLK_DIV_PERIC3_VAL, &exynos_clock->clk_div_peric3);
- writel(CLK_DIV_PERIC4_VAL, &exynos_clock->clk_div_peric4);
-
- writel(CLK_DIV_CPERI1_VAL, &exynos_clock->clk_div_cperi1);
-
- writel(CLK_DIV2_RATIO, &exynos_clock->clkdiv2_ratio);
- writel(CLK_DIV4_RATIO, &exynos_clock->clkdiv4_ratio);
- writel(CLK_DIV_G2D, &exynos_clock->clk_div_g2d);
-
- writel(CLK_SRC_CPU_VAL, &exynos_clock->clk_src_cpu);
- writel(CLK_SRC_TOP6_VAL, &exynos_clock->clk_src_top6);
- writel(CLK_SRC_CDREX_VAL, &exynos_clock->clk_src_cdrex);
- writel(CLK_SRC_KFC_VAL, &exynos_clock->clk_src_kfc);
+ write32(&exynos_clock->clk_src_fsys, CLK_SRC_FSYS0_VAL);
+ write32(&exynos_clock->clk_div_fsys0, CLK_DIV_FSYS0_VAL);
+ write32(&exynos_clock->clk_div_fsys1, CLK_DIV_FSYS1_VAL);
+ write32(&exynos_clock->clk_div_fsys2, CLK_DIV_FSYS2_VAL);
+
+ write32(&exynos_clock->clk_src_isp, CLK_SRC_ISP_VAL);
+ write32(&exynos_clock->clk_div_isp0, CLK_DIV_ISP0_VAL);
+ write32(&exynos_clock->clk_div_isp1, CLK_DIV_ISP1_VAL);
+
+ write32(&exynos_clock->clk_src_peric0, CLK_SRC_PERIC0_VAL);
+ write32(&exynos_clock->clk_src_peric1, CLK_SRC_PERIC1_VAL);
+
+ write32(&exynos_clock->clk_div_peric0, CLK_DIV_PERIC0_VAL);
+ write32(&exynos_clock->clk_div_peric1, CLK_DIV_PERIC1_VAL);
+ write32(&exynos_clock->clk_div_peric2, CLK_DIV_PERIC2_VAL);
+ write32(&exynos_clock->clk_div_peric3, CLK_DIV_PERIC3_VAL);
+ write32(&exynos_clock->clk_div_peric4, CLK_DIV_PERIC4_VAL);
+
+ write32(&exynos_clock->clk_div_cperi1, CLK_DIV_CPERI1_VAL);
+
+ write32(&exynos_clock->clkdiv2_ratio, CLK_DIV2_RATIO);
+ write32(&exynos_clock->clkdiv4_ratio, CLK_DIV4_RATIO);
+ write32(&exynos_clock->clk_div_g2d, CLK_DIV_G2D);
+
+ write32(&exynos_clock->clk_src_cpu, CLK_SRC_CPU_VAL);
+ write32(&exynos_clock->clk_src_top6, CLK_SRC_TOP6_VAL);
+ write32(&exynos_clock->clk_src_cdrex, CLK_SRC_CDREX_VAL);
+ write32(&exynos_clock->clk_src_kfc, CLK_SRC_KFC_VAL);
}
void clock_gate(void)
diff --git a/src/soc/samsung/exynos5420/dmc_common.c b/src/soc/samsung/exynos5420/dmc_common.c
index cb1546e61a..c6fe09d705 100644
--- a/src/soc/samsung/exynos5420/dmc_common.c
+++ b/src/soc/samsung/exynos5420/dmc_common.c
@@ -45,19 +45,19 @@ int dmc_config_zq(struct mem_timings *mem,
val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT;
val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT;
val |= ZQ_CLK_DIV_EN;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* Disable termination */
if (mem->zq_mode_noterm)
val |= PHY_CON16_ZQ_MODE_NOTERM_MASK;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* ZQ_MANUAL_START: Enable */
val |= ZQ_MANUAL_STR;
- writel(val, &phy0_ctrl->phy_con16);
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
+ write32(&phy1_ctrl->phy_con16, val);
/* ZQ_MANUAL_START: Disable */
val &= ~ZQ_MANUAL_STR;
@@ -67,22 +67,22 @@ int dmc_config_zq(struct mem_timings *mem,
* we are looping for the ZQ_init to complete.
*/
i = ZQ_INIT_TIMEOUT;
- while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ while ((read32(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
udelay(1);
i--;
}
if (!i)
return -1;
- writel(val, &phy0_ctrl->phy_con16);
+ write32(&phy0_ctrl->phy_con16, val);
i = ZQ_INIT_TIMEOUT;
- while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ while ((read32(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
udelay(1);
i--;
}
if (!i)
return -1;
- writel(val, &phy1_ctrl->phy_con16);
+ write32(&phy1_ctrl->phy_con16, val);
return 0;
}
@@ -93,18 +93,18 @@ void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode)
if (mode == DDR_MODE_DDR3) {
val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
}
/* Update DLL Information: Force DLL Resynchronization */
- val = readl(&dmc->phycontrol0);
+ val = read32(&dmc->phycontrol0);
val |= FP_RSYNC;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
/* Reset Force DLL Resynchronization */
- val = readl(&dmc->phycontrol0);
+ val = read32(&dmc->phycontrol0);
val &= ~FP_RSYNC;
- writel(val, &dmc->phycontrol0);
+ write32(&dmc->phycontrol0, val);
}
void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
@@ -121,7 +121,7 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* Sending NOP command */
- writel(DIRECT_CMD_NOP | mask, &dmc->directcmd);
+ write32(&dmc->directcmd, DIRECT_CMD_NOP | mask);
/*
* TODO(alim.akhtar@samsung.com): Do we need these
@@ -132,15 +132,15 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
/* Sending EMRS/MRS commands */
for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
- writel(mem->direct_cmd_msr[i] | mask,
- &dmc->directcmd);
+ write32(&dmc->directcmd,
+ mem->direct_cmd_msr[i] | mask);
udelay(100);
}
if (mem->send_zq_init) {
/* Sending ZQINIT command */
- writel(DIRECT_CMD_ZQINIT | mask,
- &dmc->directcmd);
+ write32(&dmc->directcmd,
+ DIRECT_CMD_ZQINIT | mask);
/*
* FIXME: This was originally sdelay(10000)
* in the imported u-boot code. That may have
@@ -166,7 +166,7 @@ void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* PALL (all banks precharge) CMD */
- writel(DIRECT_CMD_PALL | mask, &dmc->directcmd);
+ write32(&dmc->directcmd, DIRECT_CMD_PALL | mask);
udelay(100);
}
}
diff --git a/src/soc/samsung/exynos5420/dmc_init_ddr3.c b/src/soc/samsung/exynos5420/dmc_init_ddr3.c
index 8186b6dbdf..6972618ac3 100644
--- a/src/soc/samsung/exynos5420/dmc_init_ddr3.c
+++ b/src/soc/samsung/exynos5420/dmc_init_ddr3.c
@@ -47,40 +47,40 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
/* Enable BYPASS mode */
setbits_le32(&exynos_clock->bpll_con1, BYPASS_EN);
- writel(MUX_BPLL_SEL_FOUTBPLL, &exynos_clock->clk_src_cdrex);
+ write32(&exynos_clock->clk_src_cdrex, MUX_BPLL_SEL_FOUTBPLL);
do {
- val = readl(&exynos_clock->clk_mux_stat_cdrex);
+ val = read32(&exynos_clock->clk_mux_stat_cdrex);
val &= BPLL_SEL_MASK;
} while (val != FOUTBPLL);
clrbits_le32(&exynos_clock->bpll_con1, BYPASS_EN);
/* Specify the DDR memory type as DDR3 */
- val = readl(&exynos_phy0_control->phy_con0);
+ val = read32(&exynos_phy0_control->phy_con0);
val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
val |= (mem->mem_type << PHY_CON0_CTRL_DDR_MODE_SHIFT);
- writel(val, &exynos_phy0_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, val);
- val = readl(&exynos_phy1_control->phy_con0);
+ val = read32(&exynos_phy1_control->phy_con0);
val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
val |= (mem->mem_type << PHY_CON0_CTRL_DDR_MODE_SHIFT);
- writel(val, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy1_control->phy_con0, val);
/* Set Read Latency and Burst Length for PHY0 and PHY1 */
val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
- writel(val, &exynos_phy0_control->phy_con42);
- writel(val, &exynos_phy1_control->phy_con42);
+ write32(&exynos_phy0_control->phy_con42, val);
+ write32(&exynos_phy1_control->phy_con42, val);
- val = readl(&exynos_phy0_control->phy_con26);
+ val = read32(&exynos_phy0_control->phy_con26);
val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
- writel(val, &exynos_phy0_control->phy_con26);
+ write32(&exynos_phy0_control->phy_con26, val);
- val = readl(&exynos_phy1_control->phy_con26);
+ val = read32(&exynos_phy1_control->phy_con26);
val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
- writel(val, &exynos_phy1_control->phy_con26);
+ write32(&exynos_phy1_control->phy_con26, val);
/* Set Driver strength for CK, CKE, CS & CA to 0x7
* Set Driver strength for Data Slice 0~3 to 0x6
@@ -89,8 +89,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
(0x7 << CA_CS_DRVR_DS_OFFSET) | (0x7 << CA_ADR_DRVR_DS_OFFSET);
val |= (0x7 << DA_3_DS_OFFSET) | (0x7 << DA_2_DS_OFFSET) |
(0x7 << DA_1_DS_OFFSET) | (0x7 << DA_0_DS_OFFSET);
- writel(val, &exynos_phy0_control->phy_con39);
- writel(val, &exynos_phy1_control->phy_con39);
+ write32(&exynos_phy0_control->phy_con39, val);
+ write32(&exynos_phy1_control->phy_con39, val);
/* ZQ Calibration */
if (dmc_config_zq(mem, exynos_phy0_control, exynos_phy1_control))
@@ -100,31 +100,27 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
clrbits_le32(&exynos_phy1_control->phy_con16, ZQ_CLK_DIV_EN);
/* DQ Signal */
- val = readl(&exynos_phy0_control->phy_con14);
+ val = read32(&exynos_phy0_control->phy_con14);
val |= mem->phy0_pulld_dqs;
- writel(val, &exynos_phy0_control->phy_con14);
- val = readl(&exynos_phy1_control->phy_con14);
+ write32(&exynos_phy0_control->phy_con14, val);
+ val = read32(&exynos_phy1_control->phy_con14);
val |= mem->phy1_pulld_dqs;
- writel(val, &exynos_phy1_control->phy_con14);
+ write32(&exynos_phy1_control->phy_con14, val);
val = MEM_TERM_EN | PHY_TERM_EN;
- writel(val, &exynos_drex0->phycontrol0);
- writel(val, &exynos_drex1->phycontrol0);
-
- writel(mem->concontrol |
- (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
- &exynos_drex0->concontrol);
- writel(mem->concontrol |
- (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
- &exynos_drex1->concontrol);
+ write32(&exynos_drex0->phycontrol0, val);
+ write32(&exynos_drex1->phycontrol0, val);
+
+ write32(&exynos_drex0->concontrol,
+ mem->concontrol | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
+ write32(&exynos_drex1->concontrol,
+ mem->concontrol | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT));
do {
- val = readl(&exynos_drex0->phystatus);
+ val = read32(&exynos_drex0->phystatus);
} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
do {
- val = readl(&exynos_drex1->phystatus);
+ val = read32(&exynos_drex1->phystatus);
} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
clrbits_le32(&exynos_drex0->concontrol, DFI_INIT_START);
@@ -134,41 +130,41 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
update_reset_dll(exynos_drex1, mem->mem_type);
/* MEMBASECONFIG0 (CS0) */
- writel(mem->membaseconfig0, &exynos_tzasc0->membaseconfig0);
- writel(mem->membaseconfig0, &exynos_tzasc1->membaseconfig0);
+ write32(&exynos_tzasc0->membaseconfig0, mem->membaseconfig0);
+ write32(&exynos_tzasc1->membaseconfig0, mem->membaseconfig0);
/* MEMBASECONFIG1 (CS1) */
if (mem->chips_per_channel == 2) {
- writel(mem->membaseconfig1, &exynos_tzasc0->membaseconfig1);
- writel(mem->membaseconfig1, &exynos_tzasc1->membaseconfig1);
+ write32(&exynos_tzasc0->membaseconfig1, mem->membaseconfig1);
+ write32(&exynos_tzasc1->membaseconfig1, mem->membaseconfig1);
}
/* Memory Channel Interleaving Size
* Exynos5420 Channel interleaving = 128 bytes
*/
/* MEMCONFIG0/1 */
- writel(mem->memconfig, &exynos_tzasc0->memconfig0);
- writel(mem->memconfig, &exynos_tzasc1->memconfig0);
- writel(mem->memconfig, &exynos_tzasc0->memconfig1);
- writel(mem->memconfig, &exynos_tzasc1->memconfig1);
+ write32(&exynos_tzasc0->memconfig0, mem->memconfig);
+ write32(&exynos_tzasc1->memconfig0, mem->memconfig);
+ write32(&exynos_tzasc0->memconfig1, mem->memconfig);
+ write32(&exynos_tzasc1->memconfig1, mem->memconfig);
/* Precharge Configuration */
- writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
- &exynos_drex0->prechconfig0);
- writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
- &exynos_drex1->prechconfig0);
+ write32(&exynos_drex0->prechconfig0,
+ mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT);
+ write32(&exynos_drex1->prechconfig0,
+ mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT);
/* TimingRow, TimingData, TimingPower and Timingref
* values as per Memory AC parameters
*/
- writel(mem->timing_ref, &exynos_drex0->timingref);
- writel(mem->timing_ref, &exynos_drex1->timingref);
- writel(mem->timing_row, &exynos_drex0->timingrow);
- writel(mem->timing_row, &exynos_drex1->timingrow);
- writel(mem->timing_data, &exynos_drex0->timingdata);
- writel(mem->timing_data, &exynos_drex1->timingdata);
- writel(mem->timing_power, &exynos_drex0->timingpower);
- writel(mem->timing_power, &exynos_drex1->timingpower);
+ write32(&exynos_drex0->timingref, mem->timing_ref);
+ write32(&exynos_drex1->timingref, mem->timing_ref);
+ write32(&exynos_drex0->timingrow, mem->timing_row);
+ write32(&exynos_drex1->timingrow, mem->timing_row);
+ write32(&exynos_drex0->timingdata, mem->timing_data);
+ write32(&exynos_drex1->timingdata, mem->timing_data);
+ write32(&exynos_drex0->timingpower, mem->timing_power);
+ write32(&exynos_drex1->timingpower, mem->timing_power);
if (reset) {
/* Send NOP, MRS and ZQINIT commands.
@@ -189,8 +185,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
* release pad retention and retain the memory content until the
* initialization is complete.
*/
- writel(PAD_RETENTION_DRAM_COREBLK_VAL,
- &exynos_power->padret_dram_cblk_opt);
+ write32(&exynos_power->padret_dram_cblk_opt,
+ PAD_RETENTION_DRAM_COREBLK_VAL);
do {
ret = read32(&exynos_power->padret_dram_status);
} while (ret != 0x1);
@@ -201,57 +197,55 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
*/
for (i = 0; i < 128; i++) {
for (chip = 0; chip < mem->chips_to_configure; chip++) {
- writel(DIRECT_CMD_REFA |
- (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex0->directcmd);
- writel(DIRECT_CMD_REFA |
- (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex1->directcmd);
+ write32(&exynos_drex0->directcmd,
+ DIRECT_CMD_REFA | (chip << DIRECT_CMD_CHIP_SHIFT));
+ write32(&exynos_drex1->directcmd,
+ DIRECT_CMD_REFA | (chip << DIRECT_CMD_CHIP_SHIFT));
}
}
}
if (mem->gate_leveling_enable) {
- writel(PHY_CON0_RESET_VAL, &exynos_phy0_control->phy_con0);
- writel(PHY_CON0_RESET_VAL, &exynos_phy1_control->phy_con0);
+ write32(&exynos_phy0_control->phy_con0, PHY_CON0_RESET_VAL);
+ write32(&exynos_phy1_control->phy_con0, PHY_CON0_RESET_VAL);
setbits_le32(&exynos_phy0_control->phy_con0, P0_CMD_EN);
setbits_le32(&exynos_phy1_control->phy_con0, P0_CMD_EN);
val = PHY_CON2_RESET_VAL;
val |= INIT_DESKEW_EN;
- writel(val, &exynos_phy0_control->phy_con2);
- writel(val, &exynos_phy1_control->phy_con2);
+ write32(&exynos_phy0_control->phy_con2, val);
+ write32(&exynos_phy1_control->phy_con2, val);
- val = readl(&exynos_phy0_control->phy_con1);
+ val = read32(&exynos_phy0_control->phy_con1);
val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
- writel(val, &exynos_phy0_control->phy_con1);
+ write32(&exynos_phy0_control->phy_con1, val);
- val = readl(&exynos_phy1_control->phy_con1);
+ val = read32(&exynos_phy1_control->phy_con1);
val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
- writel(val, &exynos_phy1_control->phy_con1);
+ write32(&exynos_phy1_control->phy_con1, val);
- nLockR = readl(&exynos_phy0_control->phy_con13);
+ nLockR = read32(&exynos_phy0_control->phy_con13);
nLockW_phy0 = (nLockR & CTRL_LOCK_COARSE_MASK) >> 2;
- nLockR = readl(&exynos_phy0_control->phy_con12);
+ nLockR = read32(&exynos_phy0_control->phy_con12);
nLockR &= ~CTRL_DLL_ON;
nLockR |= nLockW_phy0;
- writel(nLockR, &exynos_phy0_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, nLockR);
- nLockR = readl(&exynos_phy1_control->phy_con13);
+ nLockR = read32(&exynos_phy1_control->phy_con13);
nLockW_phy1 = (nLockR & CTRL_LOCK_COARSE_MASK) >> 2;
- nLockR = readl(&exynos_phy1_control->phy_con12);
+ nLockR = read32(&exynos_phy1_control->phy_con12);
nLockR &= ~CTRL_DLL_ON;
nLockR |= nLockW_phy1;
- writel(nLockR, &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy1_control->phy_con12, nLockR);
val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4;
for (chip = 0; chip < mem->chips_to_configure; chip++) {
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex0->directcmd);
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex1->directcmd);
+ write32(&exynos_drex0->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
+ write32(&exynos_drex1->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
}
setbits_le32(&exynos_phy0_control->phy_con2, RDLVL_GATE_EN);
@@ -260,17 +254,17 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
setbits_le32(&exynos_phy0_control->phy_con0, CTRL_SHGATE);
setbits_le32(&exynos_phy1_control->phy_con0, CTRL_SHGATE);
- val = readl(&exynos_phy0_control->phy_con1);
+ val = read32(&exynos_phy0_control->phy_con1);
val &= ~(CTRL_GATEDURADJ_MASK);
- writel(val, &exynos_phy0_control->phy_con1);
+ write32(&exynos_phy0_control->phy_con1, val);
- val = readl(&exynos_phy1_control->phy_con1);
+ val = read32(&exynos_phy1_control->phy_con1);
val &= ~(CTRL_GATEDURADJ_MASK);
- writel(val, &exynos_phy1_control->phy_con1);
+ write32(&exynos_phy1_control->phy_con1, val);
- writel(CTRL_RDLVL_GATE_ENABLE, &exynos_drex0->rdlvl_config);
+ write32(&exynos_drex0->rdlvl_config, CTRL_RDLVL_GATE_ENABLE);
i = TIMEOUT;
- while (((readl(&exynos_drex0->phystatus) & RDLVL_COMPLETE_CHO)
+ while (((read32(&exynos_drex0->phystatus) & RDLVL_COMPLETE_CHO)
!= RDLVL_COMPLETE_CHO) && (i > 0)) {
/*
* TODO(waihong): Comment on how long this take to
@@ -281,11 +275,11 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
}
if (!i)
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
- writel(CTRL_RDLVL_GATE_DISABLE, &exynos_drex0->rdlvl_config);
+ write32(&exynos_drex0->rdlvl_config, CTRL_RDLVL_GATE_DISABLE);
- writel(CTRL_RDLVL_GATE_ENABLE, &exynos_drex1->rdlvl_config);
+ write32(&exynos_drex1->rdlvl_config, CTRL_RDLVL_GATE_ENABLE);
i = TIMEOUT;
- while (((readl(&exynos_drex1->phystatus) & RDLVL_COMPLETE_CHO)
+ while (((read32(&exynos_drex1->phystatus) & RDLVL_COMPLETE_CHO)
!= RDLVL_COMPLETE_CHO) && (i > 0)) {
/*
* TODO(waihong): Comment on how long this take to
@@ -296,23 +290,23 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
}
if (!i)
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
- writel(CTRL_RDLVL_GATE_DISABLE, &exynos_drex1->rdlvl_config);
+ write32(&exynos_drex1->rdlvl_config, CTRL_RDLVL_GATE_DISABLE);
- writel(0, &exynos_phy0_control->phy_con14);
- writel(0, &exynos_phy1_control->phy_con14);
+ write32(&exynos_phy0_control->phy_con14, 0);
+ write32(&exynos_phy1_control->phy_con14, 0);
val = (0x3 << DIRECT_CMD_BANK_SHIFT);
for (chip = 0; chip < mem->chips_to_configure; chip++) {
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex0->directcmd);
- writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
- &exynos_drex1->directcmd);
+ write32(&exynos_drex0->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
+ write32(&exynos_drex1->directcmd,
+ val | (chip << DIRECT_CMD_CHIP_SHIFT));
}
/* Common Settings for Leveling */
val = PHY_CON12_RESET_VAL;
- writel((val + nLockW_phy0), &exynos_phy0_control->phy_con12);
- writel((val + nLockW_phy1), &exynos_phy1_control->phy_con12);
+ write32(&exynos_phy0_control->phy_con12, (val + nLockW_phy0));
+ write32(&exynos_phy1_control->phy_con12, (val + nLockW_phy1));
setbits_le32(&exynos_phy0_control->phy_con2, DLL_DESKEW_EN);
setbits_le32(&exynos_phy1_control->phy_con2, DLL_DESKEW_EN);
@@ -322,22 +316,18 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
dmc_config_prech(mem, exynos_drex0);
dmc_config_prech(mem, exynos_drex1);
- writel(mem->memcontrol, &exynos_drex0->memcontrol);
- writel(mem->memcontrol, &exynos_drex1->memcontrol);
+ write32(&exynos_drex0->memcontrol, mem->memcontrol);
+ write32(&exynos_drex1->memcontrol, mem->memcontrol);
/*
* Set DMC Concontrol: Enable auto-refresh counter, provide
* read data fetch cycles and enable DREX auto set powerdown
* for input buffer of I/O in none read memory state.
*/
- writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
- DMC_CONCONTROL_IO_PD_CON(0x2),
- &exynos_drex0->concontrol);
- writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
- (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
- DMC_CONCONTROL_IO_PD_CON(0x2),
- &exynos_drex1->concontrol);
+ write32(&exynos_drex0->concontrol,
+ mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | DMC_CONCONTROL_IO_PD_CON(0x2));
+ write32(&exynos_drex1->concontrol,
+ mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | DMC_CONCONTROL_IO_PD_CON(0x2));
/* Enable Clock Gating Control for DMC
* this saves around 25 mw dmc power as compared to the power
diff --git a/src/soc/samsung/exynos5420/dp_lowlevel.c b/src/soc/samsung/exynos5420/dp_lowlevel.c
index 5a3adf907e..f56148fec3 100644
--- a/src/soc/samsung/exynos5420/dp_lowlevel.c
+++ b/src/soc/samsung/exynos5420/dp_lowlevel.c
@@ -55,7 +55,7 @@ static inline unsigned long fradl(void *v) {
#define lread32(a) fradl((void *)(a))
#else
-#define lwrite32(a,b) writel((unsigned long)(a), (void *)(b))
+#define lwrite32(a,b) write32((void *)(b), (unsigned long)(a))
#define lread32(a) read32((void *)(a))
#endif
diff --git a/src/soc/samsung/exynos5420/fimd.c b/src/soc/samsung/exynos5420/fimd.c
index dfd123254c..8059f49f1a 100644
--- a/src/soc/samsung/exynos5420/fimd.c
+++ b/src/soc/samsung/exynos5420/fimd.c
@@ -47,8 +47,8 @@ static inline unsigned long fradl(void *v) {
#define lreadl(a) fradl((void *)(a))
#else
-#define lwritel(a,b) writel((unsigned long)(a), (void *)(b))
-#define lreadl(a) readl((void *)(a))
+#define lwritel(a,b) write32((void *)(b), (unsigned long)(a))
+#define lreadl(a) read32((void *)(a))
#endif
/* not sure where we want this so ... */
diff --git a/src/soc/samsung/exynos5420/gpio.c b/src/soc/samsung/exynos5420/gpio.c
index 92cdc28fc0..0a53018b3f 100644
--- a/src/soc/samsung/exynos5420/gpio.c
+++ b/src/soc/samsung/exynos5420/gpio.c
@@ -82,10 +82,10 @@ void gpio_cfg_pin(int gpio, int cfg)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->con);
+ value = read32(&bank->con);
value &= ~CON_MASK(GPIO_BIT(gpio));
value |= CON_SFR(GPIO_BIT(gpio), cfg);
- writel(value, &bank->con);
+ write32(&bank->con, value);
}
static int gpio_get_cfg(int gpio)
@@ -93,7 +93,7 @@ static int gpio_get_cfg(int gpio)
struct gpio_bank *bank = gpio_get_bank(gpio);
int shift = GPIO_BIT(gpio) << 2;
- return (readl(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift;
+ return (read32(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift;
}
void gpio_set_pull(int gpio, int mode)
@@ -101,7 +101,7 @@ void gpio_set_pull(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->pull);
+ value = read32(&bank->pull);
value &= ~PULL_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -113,7 +113,7 @@ void gpio_set_pull(int gpio, int mode)
break;
}
- writel(value, &bank->pull);
+ write32(&bank->pull, value);
}
void gpio_set_drv(int gpio, int mode)
@@ -121,7 +121,7 @@ void gpio_set_drv(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->drv);
+ value = read32(&bank->drv);
value &= ~DRV_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -135,7 +135,7 @@ void gpio_set_drv(int gpio, int mode)
return;
}
- writel(value, &bank->drv);
+ write32(&bank->drv, value);
}
void gpio_set_rate(int gpio, int mode)
@@ -143,7 +143,7 @@ void gpio_set_rate(int gpio, int mode)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->drv);
+ value = read32(&bank->drv);
value &= ~RATE_MASK(GPIO_BIT(gpio));
switch (mode) {
@@ -155,7 +155,7 @@ void gpio_set_rate(int gpio, int mode)
return;
}
- writel(value, &bank->drv);
+ write32(&bank->drv, value);
}
int gpio_direction_input(unsigned gpio)
@@ -170,11 +170,11 @@ int gpio_direction_output(unsigned gpio, int value)
unsigned int val;
struct gpio_bank *bank = gpio_get_bank(gpio);
- val = readl(&bank->dat);
+ val = read32(&bank->dat);
val &= ~DAT_MASK(GPIO_BIT(gpio));
if (value)
val |= DAT_SET(GPIO_BIT(gpio));
- writel(val, &bank->dat);
+ write32(&bank->dat, val);
gpio_cfg_pin(gpio, GPIO_OUTPUT);
@@ -186,7 +186,7 @@ int gpio_get_value(unsigned gpio)
unsigned int value;
struct gpio_bank *bank = gpio_get_bank(gpio);
- value = readl(&bank->dat);
+ value = read32(&bank->dat);
return !!(value & DAT_MASK(GPIO_BIT(gpio)));
}
@@ -195,11 +195,11 @@ int gpio_set_value(unsigned gpio, int value)
unsigned int val;
struct gpio_bank *bank = gpio_get_bank(gpio);
- val = readl(&bank->dat);
+ val = read32(&bank->dat);
val &= ~DAT_MASK(GPIO_BIT(gpio));
if (value)
val |= DAT_SET(GPIO_BIT(gpio));
- writel(val, &bank->dat);
+ write32(&bank->dat, val);
return 0;
}
diff --git a/src/soc/samsung/exynos5420/i2c.c b/src/soc/samsung/exynos5420/i2c.c
index 28e3f0c331..1b541b7326 100644
--- a/src/soc/samsung/exynos5420/i2c.c
+++ b/src/soc/samsung/exynos5420/i2c.c
@@ -270,7 +270,7 @@ static int hsi2c_get_clk_details(struct i2c_bus *i2c, int *div, int *cycle,
* temp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2)
* temp1 = (TSCLK_L + TSCLK_H + 2)
*/
- uint32_t flt_cycle = (readl(&regs->i2c_conf) >> 16) & 0x7;
+ uint32_t flt_cycle = (read32(&regs->i2c_conf) >> 16) & 0x7;
int temp = (clkin / op_clk) - 8 - 2 * flt_cycle;
// CLK_DIV max is 256.
@@ -310,18 +310,18 @@ static void hsi2c_ch_init(struct i2c_bus *i2c, unsigned int frequency)
uint32_t timing_sla = data_hd << 0;
// Currently operating in fast speed mode.
- writel(timing_fs1, &regs->i2c_timing_fs1);
- writel(timing_fs2, &regs->i2c_timing_fs2);
- writel(timing_fs3, &regs->i2c_timing_fs3);
- writel(timing_sla, &regs->i2c_timing_sla);
+ write32(&regs->i2c_timing_fs1, timing_fs1);
+ write32(&regs->i2c_timing_fs2, timing_fs2);
+ write32(&regs->i2c_timing_fs3, timing_fs3);
+ write32(&regs->i2c_timing_sla, timing_sla);
// Clear to enable timeout.
- writel(readl(&regs->i2c_timeout) & ~Hsi2cTimeoutEn,
- &regs->i2c_timeout);
+ write32(&regs->i2c_timeout,
+ read32(&regs->i2c_timeout) & ~Hsi2cTimeoutEn);
- writel(Hsi2cTrailingCount, &regs->usi_trailing_ctl);
- writel(Hsi2cRxfifoEn | Hsi2cTxfifoEn, &regs->usi_fifo_ctl);
- writel(readl(&regs->i2c_conf) | Hsi2cAutoMode, &regs->i2c_conf);
+ write32(&regs->usi_trailing_ctl, Hsi2cTrailingCount);
+ write32(&regs->usi_fifo_ctl, Hsi2cRxfifoEn | Hsi2cTxfifoEn);
+ write32(&regs->i2c_conf, read32(&regs->i2c_conf) | Hsi2cAutoMode);
}
static void hsi2c_reset(struct i2c_bus *i2c)
@@ -329,8 +329,8 @@ static void hsi2c_reset(struct i2c_bus *i2c)
struct hsi2c_regs *regs = i2c->hsregs;
// Set and clear the bit for reset.
- writel(readl(&regs->usi_ctl) | Hsi2cSwRst, &regs->usi_ctl);
- writel(readl(&regs->usi_ctl) & ~Hsi2cSwRst, &regs->usi_ctl);
+ write32(&regs->usi_ctl, read32(&regs->usi_ctl) | Hsi2cSwRst);
+ write32(&regs->usi_ctl, read32(&regs->usi_ctl) & ~Hsi2cSwRst);
/* FIXME: This just assumes 100KHz as a default bus freq */
hsi2c_ch_init(i2c, 100000);
@@ -356,13 +356,13 @@ static void i2c_ch_init(struct i2c_bus *i2c, int speed)
// Set prescaler, divisor according to freq, also set ACKGEN, IRQ.
val = (div & 0x0f) | 0xa0 | ((pres == 512) ? 0x40 : 0);
- writel(val, &regs->con);
+ write32(&regs->con, val);
// Init to SLAVE RECEIVE mode and clear I2CADDn.
- writel(0, &regs->stat);
- writel(0, &regs->add);
+ write32(&regs->stat, 0);
+ write32(&regs->add, 0);
// program Master Transmit (and implicit STOP).
- writel(I2cStatMasterXmit | I2cStatEnable, &regs->stat);
+ write32(&regs->stat, I2cStatMasterXmit | I2cStatEnable);
}
void i2c_init(unsigned bus, int speed, int slaveadd)
@@ -430,7 +430,7 @@ static int hsi2c_senddata(struct hsi2c_regs *regs, const uint8_t *data, int len)
{
while (!hsi2c_check_transfer(regs) && len) {
if (!(read32(&regs->usi_fifo_stat) & Hsi2cTxFifoFull)) {
- writel(*data++, &regs->usi_txdata);
+ write32(&regs->usi_txdata, *data++);
len--;
}
}
@@ -452,7 +452,7 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop)
{
const uint32_t usi_ctl = Hsi2cFuncModeI2c | Hsi2cMaster;
- writel(HSI2C_SLV_ADDR_MAS(seg->chip), &regs->i2c_addr);
+ write32(&regs->i2c_addr, HSI2C_SLV_ADDR_MAS(seg->chip));
/*
* We really only want to stop after this transaction (I think) if the
@@ -465,14 +465,14 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop)
seg->len | Hsi2cMasterRun | Hsi2cStopAfterTrans;
if (seg->read) {
- writel(usi_ctl | Hsi2cRxchon, &regs->usi_ctl);
- writel(autoconf | Hsi2cReadWrite, &regs->i2c_auto_conf);
+ write32(&regs->usi_ctl, usi_ctl | Hsi2cRxchon);
+ write32(&regs->i2c_auto_conf, autoconf | Hsi2cReadWrite);
if (hsi2c_recvdata(regs, seg->buf, seg->len))
return -1;
} else {
- writel(usi_ctl | Hsi2cTxchon, &regs->usi_ctl);
- writel(autoconf, &regs->i2c_auto_conf);
+ write32(&regs->usi_ctl, usi_ctl | Hsi2cTxchon);
+ write32(&regs->i2c_auto_conf, autoconf);
if (hsi2c_senddata(regs, seg->buf, seg->len))
return -1;
@@ -481,7 +481,7 @@ static int hsi2c_segment(struct i2c_seg *seg, struct hsi2c_regs *regs, int stop)
if (hsi2c_wait_for_transfer(regs) != 1)
return -1;
- writel(Hsi2cFuncModeI2c, &regs->usi_ctl);
+ write32(&regs->usi_ctl, Hsi2cFuncModeI2c);
return 0;
}
@@ -510,34 +510,34 @@ static int hsi2c_transfer(struct i2c_bus *i2c, struct i2c_seg *segments,
static int i2c_int_pending(struct i2c_regs *regs)
{
- return readb(&regs->con) & I2cConIntPending;
+ return read8(&regs->con) & I2cConIntPending;
}
static void i2c_clear_int(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) & ~I2cConIntPending, &regs->con);
+ write8(&regs->con, read8(&regs->con) & ~I2cConIntPending);
}
static void i2c_ack_enable(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) | I2cConAckGen, &regs->con);
+ write8(&regs->con, read8(&regs->con) | I2cConAckGen);
}
static void i2c_ack_disable(struct i2c_regs *regs)
{
- writeb(readb(&regs->con) & ~I2cConAckGen, &regs->con);
+ write8(&regs->con, read8(&regs->con) & ~I2cConAckGen);
}
static int i2c_got_ack(struct i2c_regs *regs)
{
- return !(readb(&regs->stat) & I2cStatAck);
+ return !(read8(&regs->stat) & I2cStatAck);
}
static int i2c_wait_for_idle(struct i2c_regs *regs)
{
int timeout = 1000 * 100; // 1s.
while (timeout--) {
- if (!(readb(&regs->stat) & I2cStatBusy))
+ if (!(read8(&regs->stat) & I2cStatBusy))
return 0;
udelay(10);
}
@@ -562,17 +562,17 @@ static int i2c_wait_for_int(struct i2c_regs *regs)
static int i2c_send_stop(struct i2c_regs *regs)
{
- uint8_t mode = readb(&regs->stat) & (I2cStatModeMask);
- writeb(mode | I2cStatEnable, &regs->stat);
+ uint8_t mode = read8(&regs->stat) & (I2cStatModeMask);
+ write8(&regs->stat, mode | I2cStatEnable);
i2c_clear_int(regs);
return i2c_wait_for_idle(regs);
}
static int i2c_send_start(struct i2c_regs *regs, int read, int chip)
{
- writeb(chip << 1, &regs->ds);
+ write8(&regs->ds, chip << 1);
uint8_t mode = read ? I2cStatMasterRecv : I2cStatMasterXmit;
- writeb(mode | I2cStatStartStop | I2cStatEnable, &regs->stat);
+ write8(&regs->stat, mode | I2cStatStartStop | I2cStatEnable);
i2c_clear_int(regs);
if (i2c_wait_for_int(regs))
@@ -594,7 +594,7 @@ static int i2c_xmit_buf(struct i2c_regs *regs, uint8_t *data, int len)
int i;
for (i = 0; i < len; i++) {
- writeb(data[i], &regs->ds);
+ write8(&regs->ds, data[i]);
i2c_clear_int(regs);
if (i2c_wait_for_int(regs))
@@ -624,7 +624,7 @@ static int i2c_recv_buf(struct i2c_regs *regs, uint8_t *data, int len)
if (i2c_wait_for_int(regs))
return 1;
- data[i] = readb(&regs->ds);
+ data[i] = read8(&regs->ds);
}
return 0;
@@ -642,7 +642,7 @@ int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count)
if (!regs || i2c_wait_for_idle(regs))
return 1;
- writeb(I2cStatMasterXmit | I2cStatEnable, &regs->stat);
+ write8(&regs->stat, I2cStatMasterXmit | I2cStatEnable);
int i;
for (i = 0; i < count; i++) {
diff --git a/src/soc/samsung/exynos5420/power.c b/src/soc/samsung/exynos5420/power.c
index c7d491dd23..1b8aaa67d1 100644
--- a/src/soc/samsung/exynos5420/power.c
+++ b/src/soc/samsung/exynos5420/power.c
@@ -89,5 +89,5 @@ void power_enable_xclkout(void)
void power_release_uart_retention(void)
{
- writel(1 << 28, &exynos_power->padret_uart_opt);
+ write32(&exynos_power->padret_uart_opt, 1 << 28);
}
diff --git a/src/soc/samsung/exynos5420/smp.c b/src/soc/samsung/exynos5420/smp.c
index 8775bc9baf..6c8fd06f20 100644
--- a/src/soc/samsung/exynos5420/smp.c
+++ b/src/soc/samsung/exynos5420/smp.c
@@ -152,7 +152,7 @@ static void enable_smp(void)
actlr |= ACTLR_SMP;
/* Dummy read to assure L2 access */
- val = readl(&exynos_power->inform0);
+ val = read32(&exynos_power->inform0);
val &= 0;
actlr |= val;
@@ -200,9 +200,9 @@ static void low_power_start(void)
/* On warm reset, because iRAM is not cleared, all cores will enter
* low_power_start, not the initial address. So we need to check reset
* status again, and jump to 0x0 in that case. */
- reg_val = readl(&exynos_power->spare0);
+ reg_val = read32(&exynos_power->spare0);
if (reg_val != RST_FLAG_VAL) {
- writel(0x0, VECTOR_LOW_POWER_FLAG);
+ write32(VECTOR_LOW_POWER_FLAG, 0x0);
jump_bx(CORE_RESET_INIT_ADDRESS);
/* restart cpu execution and never returns. */
}
@@ -211,9 +211,9 @@ static void low_power_start(void)
* path, bypassing first jump address and makes final jump address 0x0,
* so we try to make any core set again low_power_start address, if that
* becomes zero. */
- reg_val = readl(VECTOR_CORE_SEV_HANDLER);
+ reg_val = read32(VECTOR_CORE_SEV_HANDLER);
if (reg_val != (intptr_t)low_power_start) {
- writel((intptr_t)low_power_start, VECTOR_CORE_SEV_HANDLER);
+ write32(VECTOR_CORE_SEV_HANDLER, (intptr_t)low_power_start);
dsb();
/* ask all cores to power on again. */
sev();
@@ -258,7 +258,7 @@ static void power_down_core(void)
* S5E5420A User Manual, 8.8.1.202, ARM_CORE0_CONFIGURATION, two bits to
* control power state in each power down level.
*/
- writel(0x0, &exynos_power->arm_core[core_id].config);
+ write32(&exynos_power->arm_core[core_id].config, 0x0);
/* S5E5420A User Manual, 8.4.2.5, after ARM_CORE*_CONFIGURATION has been
* set to zero, PMU will detect and wait for WFI then run power-down
@@ -281,15 +281,15 @@ static void configure_secondary_cores(void)
* when we want to use SMP inside firmware. */
/* Clear boot reg (hotplug address) in cpu states */
- writel(0, (void*)&exynos_cpu_states->hotplug_address);
+ write32((void *)&exynos_cpu_states->hotplug_address, 0);
/* set low_power flag and address */
- writel((intptr_t)low_power_start, VECTOR_LOW_POWER_ADDRESS);
- writel(RST_FLAG_VAL, VECTOR_LOW_POWER_FLAG);
- writel(RST_FLAG_VAL, &exynos_power->spare0);
+ write32(VECTOR_LOW_POWER_ADDRESS, (intptr_t)low_power_start);
+ write32(VECTOR_LOW_POWER_FLAG, RST_FLAG_VAL);
+ write32(&exynos_power->spare0, RST_FLAG_VAL);
/* On next SEV, shutdown all cores. */
- writel((intptr_t)power_down_core, VECTOR_CORE_SEV_HANDLER);
+ write32(VECTOR_CORE_SEV_HANDLER, (intptr_t)power_down_core);
/* Ask all cores in WFE mode to shutdown. */
dsb();
diff --git a/src/soc/samsung/exynos5420/spi.c b/src/soc/samsung/exynos5420/spi.c
index 6ceb92edd2..3d71f79529 100644
--- a/src/soc/samsung/exynos5420/spi.c
+++ b/src/soc/samsung/exynos5420/spi.c
@@ -69,9 +69,9 @@ static inline struct exynos_spi_slave *to_exynos_spi(struct spi_slave *slave)
static void spi_sw_reset(struct exynos_spi *regs, int word)
{
- const uint32_t orig_mode_cfg = readl(&regs->mode_cfg);
+ const uint32_t orig_mode_cfg = read32(&regs->mode_cfg);
uint32_t mode_cfg = orig_mode_cfg;
- const uint32_t orig_swap_cfg = readl(&regs->swap_cfg);
+ const uint32_t orig_swap_cfg = read32(&regs->swap_cfg);
uint32_t swap_cfg = orig_swap_cfg;
mode_cfg &= ~(SPI_MODE_CH_WIDTH_MASK | SPI_MODE_BUS_WIDTH_MASK);
@@ -89,9 +89,9 @@ static void spi_sw_reset(struct exynos_spi *regs, int word)
}
if (mode_cfg != orig_mode_cfg)
- writel(mode_cfg, &regs->mode_cfg);
+ write32(&regs->mode_cfg, mode_cfg);
if (swap_cfg != orig_swap_cfg)
- writel(swap_cfg, &regs->swap_cfg);
+ write32(&regs->swap_cfg, swap_cfg);
clrbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
setbits_le32(&regs->ch_cfg, SPI_CH_RST);
@@ -106,7 +106,7 @@ void spi_init(void)
static void exynos_spi_init(struct exynos_spi *regs)
{
// Set FB_CLK_SEL.
- writel(SPI_FB_DELAY_180, &regs->fb_clk);
+ write32(&regs->fb_clk, SPI_FB_DELAY_180);
// CPOL: Active high.
clrbits_le32(&regs->ch_cfg, SPI_CH_CPOL_L);
@@ -157,10 +157,10 @@ static void spi_transfer(struct exynos_spi *regs, void *in, const void *out,
out_bytes = in_bytes = packets * width;
spi_sw_reset(regs, width == 4);
- writel(packets | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
+ write32(&regs->pkt_cnt, packets | SPI_PACKET_CNT_EN);
while (out_bytes || in_bytes) {
- uint32_t spi_sts = readl(&regs->spi_sts);
+ uint32_t spi_sts = read32(&regs->spi_sts);
int rx_lvl = ((spi_sts >> 15) & 0x1ff);
int tx_lvl = ((spi_sts >> 6) & 0x1ff);
@@ -171,13 +171,13 @@ static void spi_transfer(struct exynos_spi *regs, void *in, const void *out,
memcpy(&data, outb, width);
outb += width;
}
- writel(data, &regs->tx_data);
+ write32(&regs->tx_data, data);
out_bytes -= width;
}
if (rx_lvl >= width) {
- uint32_t data = readl(&regs->rx_data);
+ uint32_t data = read32(&regs->rx_data);
if (inb) {
memcpy(inb, &data, width);
diff --git a/src/soc/samsung/exynos5420/timer.c b/src/soc/samsung/exynos5420/timer.c
index 1e25771dbd..2abaf3bc5d 100644
--- a/src/soc/samsung/exynos5420/timer.c
+++ b/src/soc/samsung/exynos5420/timer.c
@@ -27,16 +27,15 @@ static const uint32_t clocks_per_usec = MCT_HZ/1000000;
static uint64_t mct_raw_value(void)
{
- uint64_t upper = readl(&exynos_mct->g_cnt_u);
- uint64_t lower = readl(&exynos_mct->g_cnt_l);
+ uint64_t upper = read32(&exynos_mct->g_cnt_u);
+ uint64_t lower = read32(&exynos_mct->g_cnt_l);
return (upper << 32) | lower;
}
void init_timer(void)
{
- writel(readl(&exynos_mct->g_tcon) | (0x1 << 8),
- &exynos_mct->g_tcon);
+ write32(&exynos_mct->g_tcon, read32(&exynos_mct->g_tcon) | (0x1 << 8));
}
void timer_monotonic_get(struct mono_time *mt)
diff --git a/src/soc/samsung/exynos5420/tmu.c b/src/soc/samsung/exynos5420/tmu.c
index 8ed78bba4a..19c72fdac3 100644
--- a/src/soc/samsung/exynos5420/tmu.c
+++ b/src/soc/samsung/exynos5420/tmu.c
@@ -80,7 +80,7 @@ static int get_cur_temp(struct tmu_info *info)
struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
/* Temperature code range between min 25 and max 125 */
- cur_temp = readl(&reg->current_temp) & 0xff;
+ cur_temp = read32(&reg->current_temp) & 0xff;
/* Calibrate current temperature */
if (cur_temp)
@@ -142,10 +142,10 @@ static void tmu_setup_parameters(struct tmu_info *info)
struct tmu_reg *reg = (struct tmu_reg *)info->tmu_base;
/* Must reload for using efuse value at EXYNOS */
- writel(TRIMINFO_RELOAD, &reg->triminfo_control);
+ write32(&reg->triminfo_control, TRIMINFO_RELOAD);
/* Get the compensation parameter */
- te_temp = readl(&reg->triminfo);
+ te_temp = read32(&reg->triminfo);
info->te1 = te_temp & TRIM_INFO_MASK;
info->te2 = ((te_temp >> 8) & TRIM_INFO_MASK);
@@ -169,8 +169,8 @@ static void tmu_setup_parameters(struct tmu_info *info)
(hwtrip_code << 24));
/* Set interrupt level */
- writel(rising_value, &reg->threshold_temp_rise);
- writel(cooling_temp, &reg->threshold_temp_fall);
+ write32(&reg->threshold_temp_rise, rising_value);
+ write32(&reg->threshold_temp_fall, cooling_temp);
/*
* Need to init all register settings after getting parameter info
@@ -183,20 +183,20 @@ static void tmu_setup_parameters(struct tmu_info *info)
* TODO(bhthompson): rewrite this code such that we are not performing
* a hard wipe of tmu_control and re verify functionality.
*/
- writel(data->slope, &reg->tmu_control);
+ write32(&reg->tmu_control, data->slope);
- writel(INTCLEARALL, &reg->intclear);
+ write32(&reg->intclear, INTCLEARALL);
/* TMU core enable */
- con = readl(&reg->tmu_control);
+ con = read32(&reg->tmu_control);
con |= (info->tmu_mux << 20) | THERM_TRIP_EN | CORE_EN;
- writel(con, &reg->tmu_control);
+ write32(&reg->tmu_control, con);
/* Enable HW thermal trip */
power_enable_hw_thermal_trip();
/* LEV1 LEV2 interrupt enable */
- writel(INTEN_RISE1 | INTEN_RISE2, &reg->inten);
+ write32(&reg->inten, INTEN_RISE1 | INTEN_RISE2);
}
/*
diff --git a/src/soc/samsung/exynos5420/trustzone.c b/src/soc/samsung/exynos5420/trustzone.c
index 983690dbef..5712768355 100644
--- a/src/soc/samsung/exynos5420/trustzone.c
+++ b/src/soc/samsung/exynos5420/trustzone.c
@@ -33,10 +33,10 @@ void trustzone_init(void)
for (addr = TZPC10_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
tzpc = (struct exynos_tzpc *)addr;
if (addr == TZPC0_BASE)
- writel(R0SIZE, &tzpc->r0size);
- writel(DECPROTXSET, &tzpc->decprot0set);
- writel(DECPROTXSET, &tzpc->decprot1set);
- writel(DECPROTXSET, &tzpc->decprot2set);
- writel(DECPROTXSET, &tzpc->decprot3set);
+ write32(&tzpc->r0size, R0SIZE);
+ write32(&tzpc->decprot0set, DECPROTXSET);
+ write32(&tzpc->decprot1set, DECPROTXSET);
+ write32(&tzpc->decprot2set, DECPROTXSET);
+ write32(&tzpc->decprot3set, DECPROTXSET);
}
}
diff --git a/src/soc/samsung/exynos5420/uart.c b/src/soc/samsung/exynos5420/uart.c
index 74e5067b0d..bfdd54a891 100644
--- a/src/soc/samsung/exynos5420/uart.c
+++ b/src/soc/samsung/exynos5420/uart.c
@@ -66,7 +66,7 @@ static void serial_setbrg_dev(struct s5p_uart *uart)
uclk = clock_get_periph_rate(PERIPH_ID_UART3);
val = uclk / default_baudrate();
- writel(val / 16 - 1, &uart->ubrdiv);
+ write32(&uart->ubrdiv, val / 16 - 1);
/*
* FIXME(dhendrix): the original uart.h had a "br_rest" value which
@@ -88,12 +88,12 @@ static void serial_setbrg_dev(struct s5p_uart *uart)
static void exynos5_init_dev(struct s5p_uart *uart)
{
/* enable FIFOs */
- writel(0x1, &uart->ufcon);
- writel(0, &uart->umcon);
+ write32(&uart->ufcon, 0x1);
+ write32(&uart->umcon, 0);
/* 8N1 */
- writel(0x3, &uart->ulcon);
+ write32(&uart->ulcon, 0x3);
/* No interrupts, no DMA, pure polling */
- writel(0x245, &uart->ucon);
+ write32(&uart->ucon, 0x245);
serial_setbrg_dev(uart);
}
@@ -114,7 +114,7 @@ static int exynos5_uart_err_check(struct s5p_uart *uart, int op)
else
mask = 0xf;
- return readl(&uart->uerstat) & mask;
+ return read32(&uart->uerstat) & mask;
}
/*
@@ -125,13 +125,13 @@ static int exynos5_uart_err_check(struct s5p_uart *uart, int op)
static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart)
{
/* wait for character to arrive */
- while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
+ while (!(read32(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
RX_FIFO_FULL_MASK))) {
if (exynos5_uart_err_check(uart, 0))
return 0;
}
- return readb(&uart->urxh) & 0xff;
+ return read8(&uart->urxh) & 0xff;
}
/*
@@ -140,12 +140,12 @@ static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart)
static void exynos5_uart_tx_byte(struct s5p_uart *uart, unsigned char data)
{
/* wait for room in the tx FIFO */
- while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
+ while ((read32(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (exynos5_uart_err_check(uart, 1))
return;
}
- writeb(data, &uart->utxh);
+ write8(&uart->utxh, data);
}
uintptr_t uart_platform_base(int idx)
diff --git a/src/soc/samsung/exynos5420/usb.c b/src/soc/samsung/exynos5420/usb.c
index 0df63e2666..9313fea147 100644
--- a/src/soc/samsung/exynos5420/usb.c
+++ b/src/soc/samsung/exynos5420/usb.c
@@ -57,23 +57,13 @@ static void setup_dwc3(struct exynos5_usb_drd_dwc3 *dwc3)
/* Set relevant registers to default values (clearing all reset bits) */
- writel(0x1 << 24 | /* activate PHY low power states */
- 0x4 << 19 | /* low power delay value */
- 0x1 << 18 | /* activate PHY low power delay */
- 0x1 << 17 | /* enable SuperSpeed PHY suspend */
- 0x1 << 1 | /* default Tx deemphasis value */
- 0, &dwc3->usb3pipectl);
+ write32(&dwc3->usb3pipectl,
+ 0x1 << 24 | 0x4 << 19 | 0x1 << 18 | 0x1 << 17 | 0x1 << 1 | 0);
/* Configure PHY clock turnaround for 8-bit UTMI+, disable suspend */
- writel(0x9 << 10 | /* PHY clock turnaround for 8-bit UTMI+ */
- 0x1 << 8 | /* enable PHY sleep in L1 */
- 0x1 << 6 | /* enable PHY suspend */
- 0, &dwc3->usb2phycfg);
-
- writel(0x5dc << 19 | /* suspend clock scale for 24MHz */
- 0x1 << 16 | /* retry SS three times (bugfix from U-Boot) */
- 0x1 << 12 | /* port capability HOST */
- 0, &dwc3->ctl);
+ write32(&dwc3->usb2phycfg, 0x9 << 10 | 0x1 << 8 | 0x1 << 6 | 0);
+
+ write32(&dwc3->ctl, 0x5dc << 19 | 0x1 << 16 | 0x1 << 12 | 0);
}
void setup_usb_drd0_dwc3()
@@ -96,44 +86,25 @@ static void setup_drd_phy(struct exynos5_usb_drd_phy *phy)
setbits_le32(&phy->linksystem, 0x1 << 27 | 0x20 << 1);
/* Disable OTG, ID0 and DRVVBUS, do not force sleep/suspend */
- writel(1 << 6, &phy->utmi);
-
- writel(0x88 << 23 | /* spread spectrum refclk selector */
- 0x1 << 20 | /* enable spread spectrum */
- 0x1 << 19 | /* enable prescaler refclk */
- 0x68 << 11 | /* multiplier for 24MHz refclk */
- 0x5 << 5 | /* select 24MHz refclk (weird, from U-Boot) */
- 0x1 << 4 | /* power supply in normal operating mode */
- 0x3 << 2 | /* use external refclk (undocumented on 5420?)*/
- 0x1 << 1 | /* force port reset */
- 0x1 << 0 | /* normal operating mode */
- 0, &phy->clkrst);
-
- writel(0x9 << 26 | /* LOS level */
- 0x3 << 22 | /* TX VREF tune */
- 0x1 << 20 | /* TX rise tune */
- 0x1 << 18 | /* TX res tune */
- 0x3 << 13 | /* TX HS X Vtune */
- 0x3 << 9 | /* TX FS/LS tune */
- 0x3 << 6 | /* SQRX tune */
- 0x4 << 3 | /* OTG tune */
- 0x4 << 0 | /* comp disc tune */
- 0, &phy->param0);
-
- writel(0x7f << 19 | /* reserved */
- 0x7f << 12 | /* Tx launch amplitude */
- 0x20 << 6 | /* Tx deemphasis 6dB */
- 0x1c << 0 | /* Tx deemphasis 3.5dB (value from U-Boot) */
- 0, &phy->param1);
+ write32(&phy->utmi, 1 << 6);
+
+ write32(&phy->clkrst,
+ 0x88 << 23 | 0x1 << 20 | 0x1 << 19 | 0x68 << 11 | 0x5 << 5 | 0x1 << 4 | 0x3 << 2 | 0x1 << 1 | 0x1 << 0 | 0);
+
+ write32(&phy->param0,
+ 0x9 << 26 | 0x3 << 22 | 0x1 << 20 | 0x1 << 18 | 0x3 << 13 | 0x3 << 9 | 0x3 << 6 | 0x4 << 3 | 0x4 << 0 | 0);
+
+ write32(&phy->param1,
+ 0x7f << 19 | 0x7f << 12 | 0x20 << 6 | 0x1c << 0 | 0);
/* disable all test features */
- writel(0, &phy->test);
+ write32(&phy->test, 0);
/* UTMI clock select? ("must be 0x1") */
- writel(0x1 << 2, &phy->utmiclksel);
+ write32(&phy->utmiclksel, 0x1 << 2);
/* Samsung magic, undocumented (from U-Boot) */
- writel(0x0, &phy->resume);
+ write32(&phy->resume, 0x0);
udelay(10);
clrbits_le32(&phy->clkrst, 0x1 << 1); /* deassert port reset */
@@ -163,7 +134,7 @@ void setup_usb_host_phy(int hsic_gpio)
printk(BIOS_DEBUG, "Powering up USB HOST PHY (%s HSIC)\n",
hsic_gpio ? "with" : "without");
- hostphy_ctrl0 = readl(&exynos_usb_host_phy->usbphyctrl0);
+ hostphy_ctrl0 = read32(&exynos_usb_host_phy->usbphyctrl0);
hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK |
HOST_CTRL0_COMMONON_N |
/* HOST Phy setting */
@@ -177,7 +148,7 @@ void setup_usb_host_phy(int hsic_gpio)
/* HOST Phy setting */
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
- writel(hostphy_ctrl0, &exynos_usb_host_phy->usbphyctrl0);
+ write32(&exynos_usb_host_phy->usbphyctrl0, hostphy_ctrl0);
udelay(10);
clrbits_le32(&exynos_usb_host_phy->usbphyctrl0,
HOST_CTRL0_LINKSWRST |